Planer-Type Milling M-C - Double Column

x-travel 5000 mm︱y-travel 3200 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 2500 mm︱y-travel 1800 mm︱z-travel 800 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 4000 mm︱y-travel 3000 mm︱z-travel 1000 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 31000 mm︱y-travel 4310 mm︱z-travel 1500 mm︱column daylight 4000 mm︱Main spindle: ︱turning speed range - main spindle 16000 U/min︱power capacity - main spindel 34 / 44 kW︱tool taper HSK A63 ︱c-axis +/- 360 °︱A-Axis +/- 110 °︱Distance table surface - crossbeam bottom 2570 mm︱work table: ︱table surface area 30000 x 3000 mm︱max. workpiece weight 16 t︱Tool-Presetter: ︱number of toolpositions 120 pos.︱tool taper HSK A63 ︱rapid traverse ( X / Y / Z ) 20 / 20 / 16 m/min︱control Heidenhain iTNC 530 ︱total power requirement - kVA︱

---

unused 5 Axis Gantry Machining Center with moving Portal. The direct driving method using a torque motor eliminates precision problems caused by wear over time and by installing encoders on the torque motor side of the A and C axes, the actual turning angle can be accurately controlled equipped with: - CNC control Heidenhain iTNC 530 HSCI & HR 410 - fixed table: 30000 x 3000mm - 2-axis automatic head -- High speed spindle GMN HCS 230 - 16000 -- head pitch precision angle: 0.001 deg. - ATC: 120 tools (HSK A63) - Heidenhain direct linear measuring system - without coolant tank and chip conveyor

x-travel 1200 mm︱y-travel 800 mm︱z-travel 550 mm︱distance spindle center to table 150-700 mm︱distance between columns 920 mm︱table-size 1320x800 mm︱table load 2000 kg︱T-slot (width-distance-quantity) 14x120x7 mm︱spindle taper HSK-A 63/HSK-E 50 ︱spindle speed 15000 (opt. 24000/36000) U/min︱spindle drive 7.5/11 (opt. 30/39; 20/26 kW︱Spindle motor torque 47.7/70 (opt. 29.1/37.8; N.m.︱rapid traverse in x-y-z axis 30000 (opt. 40000) mm/min︱Cutting feed rate X/Y/Z axis 1~10000 (opt.1~20000) mm/min︱Tool changer 20 (opt. 24) ︱max. tool diameter 100/130 (opt. 80/130) mm︱max. tool length 300 (opt. 220) mm︱max. tool weight 8 (opt. 4) kg︱total power requirement 30 (opt. 80) kva︱Weight approx. 12 t︱

---

x-travel 1600 mm︱y-travel 1300 mm︱z-travel 700 mm︱distance spindle center to table 200-900 (opt. 225-925/250 mm︱distance between columns 1500 mm︱table-size 1800 x 1300 mm︱table load 4000 kg︱T-slot (width-distance-quantity) 22x160x8 mm︱spindle taper HSK-A 63/HSK-E 50 ︱spindle speed 15000 (opt. 24000/36000) U/min︱spindle drive 15/18,5 (opt. 25/33 od. 2 kW︱Spindle motor torque 95/118 (opt. 72.6/95.8; 1 N.m.︱rapid traverse in x-y-z axis 30000 (opt. 40000) mm/min︱Cutting feed rate X/Y/Z axis 1~20000 mm/min︱Tool changer 20 (opt. 24) ︱max. tool diameter 100/130 (opt. 80/130) mm︱max. tool length 300 (opt. 220) mm︱max. tool weight 8 (opt. 4) kg︱total power requirement 60 (opt. 80) kva︱Weight approx. 22 t︱

---

VM-2018 | VM-3018 | VM-40 ︱x-travel 2300|3200|4100 mm︱y-travel 2000 mm︱z-travel 800 mm︱distance spindle nose and table 180~980 mm︱distance between columns 1840 mm︱table-size 2300x1600|3200x1600|4100x mm︱table load 8|10|12 t︱T-slot (width-distance-quantity) 22x180x8 mm︱spindle cone 50 BT/SK︱spindle speed 6000 (opt.10000) 1/min︱spindle drive 15/18,5|22/26|22/26 kW︱Spindle motor torque 560/662 Nm (bei 10000 1/m ︱rapid traverse in x-y-z axis 20/20/15|20/20/15|15/20/1 m/min︱feeds 1~10000 mm/min︱Tool changer 32 -fach︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,020|0,025|0,03 mm︱

---

VM-3225 | VM-4225 | VM-52 ︱x-travel 3200|4200|5100 mm︱y-travel 3000/3400 mm︱z-travel 800/1000 mm︱distance spindle nose and table 235~1235 mm︱distance between columns 2550/3050 mm︱table-size 3350x2200|4350x2200|5350x mm︱table load 15|18|21 t︱T-slot (width-distance-quantity) 28x250x13|28x250x17|28x25 mm︱spindle cone 50 BT/SK︱spindle speed 6000 (opt.10000, 15000) 1/min︱spindle drive 22/26 kW︱Spindle motor torque 560/662 Nm (bei 10000 1/m ︱rapid traverse in x-y-z axis 15/18/10~15|12/18/10~15|1 m/min︱feeds 1~8000 mm/min︱Tool changer 32 -fach︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,025|0,030|0,040 mm︱

---

x-travel 1300 mm︱y-travel 1900 mm︱z-travel 800 mm︱distance spindle nose and table 180~980 mm︱distance between columns 1840 mm︱table-size 1650x1300 mm︱table load 4 t︱T-slot (width-distance-quantity) 22x180x7 mm︱spindle cone 50 BBT︱spindle speed 10000 1/min︱spindle drive 15/18,5 kW︱Spindle motor torque 526 NM︱rapid traverse in x-y-z axis 20/20/15 m/min︱feeds 1~10000 mm/min︱Tool changer 24 -fach︱workpiece length 350 mm︱tool diameter 110/220 mm︱weight of tools max. 15 kg︱positioning accuracy 0,020|0,025|0,03 mm︱repeating accuracy 0,015|0,020|0,025 mm︱

---

Brand new bridget type milling machine with Fanuc from stock with: The column and the beam were intergraded together to provide the best dynamic rigidity and precision stability. The worktable’s length wise is parallel to the beam, create the most suitable length-width ratio. The spindle was driven by dual gear box from Europe, make sure it has the quickest response time and the lowest vibration. Extra long X axis travel, easy for customer to add attachment head , extend the working range. Unique opposite angle two door design with foot rest aside of the worktable makes load and unload the work piece much easier. German made hanging type operation box with protecting door on the right side, easy for operation and tool change. Equipped with fully automatic coil type and chain type chip conveyer. Chip collecting point is located at the back of the machine. Efficient, environmental friendly and clean. The machine is operated via an operator's panel, designed by Sky Master and made in Taiwan.

x-travel 4200 mm︱y-travel 1800+650 mm︱z-travel 800 mm︱distance spindle center to table 403-1203 mm︱distance between columns 1850 mm︱table-size 4000mm×1500 mm︱

---

VM-3230 | VM-4230 | VM-52 ︱x-travel 3200|4200|5100 mm︱y-travel 3400 mm︱z-travel 1000 mm︱distance spindle nose and table 235~1235 mm︱distance between columns 3050 mm︱table-size 3350x2200|4350x2200|5350x mm︱table load 15|18|21 t︱T-slot (width-distance-quantity) 28x250x13|28x250x17|28x25 mm︱spindle cone 50 BT/SK︱spindle speed 6000 (opt.10000, 15000) 1/min︱spindle drive 22/26 kW︱Spindle motor torque 560/662 Nm︱rapid traverse in x-y-z axis 15/18/15|12/18/15|12/18/1 m/min︱feeds 1~8000 mm/min︱Tool changer 32 -fach︱workpiece length 350 mm︱tool diameter 110/225 mm︱weight of tools max. 20 kg︱positioning accuracy 0,030|0,035|0,045 mm︱

---

x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱

---

Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device

x-travel 1600 mm︱y-travel 1300 mm︱z-travel 700 mm︱distance between columns 1500 mm︱distance spindle center to table 225-925 mm︱table-size 1800 x 1300 mm︱table load 4000 kg︱T-slot (width-distance-quantity) 22x 160 x 8 mm︱spindle taper HSK-A 63 ︱spindle speed 24000 U/min︱spindle drive 25/33 kW︱Spindle motor torque 72.6/95.8 N.m.︱rapid traverse in x-y-z axis 30000 mm/min︱Cutting feed rate X/Y/Z axis 1~20000 mm/min︱Tool changer 20 fach︱max. tool diameter 100/130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱total power requirement 80 kva︱Weight approx. 22 t︱

---

Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

x-travel 2300 mm︱y-travel 2000 mm︱z-travel 1000 mm︱table-size 2300 x 1600 mm︱T-slot (width-distance-quantity) 8x 22 x 180 mm︱max. table load 8 t︱distance between columns 1840 mm︱distance spindle nose and table 180~1180 mm︱spindle drive 22/46 kW︱max. torque on the spindle 140.1/286.5 Nm (S6-25%)︱spindle nose 50 SK︱spindle speed 10000 (direkt) U/min︱rapid traverse X,Y 20000 mm/min.︱rapid traverse Z-axis 15000 mm/min︱milling feed range 1~10000 mm/min︱Machine size (LxWxH) 7027 x 5217 x 4339 mm︱total power requirement 60 kva︱weight of the machine ca. 25 t︱positioning accuracy 0,020 (gem. VDI/DGQ3441) mm︱repeating accuracy 0,015 (gem. VDI/DGQ3441) mm︱

---

Used Milling Machine KRAFT VM-3218 with Fanuc controller. Features: One-piece cast iron machine bed and one piece cast iron bridge yield in highest rigidity for precise machining results. The frame, stress-relieving designed, provides a stable performance of the machine. The whole structure was analyzed by FEM to optimize rigidity and precision. Preload roller linear guide ways with P grade allow max. Loading but with a lower friction coefficient (0.003-0.006). It supplies smooth running thanks to optimized roller recirculation and guidance, saving energy consumption. C3 grade double nut ball screws provide precise cutting, even for heavy loads. A BF gear box with a 26 KW motor generate 662Nm torque for powerful cutting, thus reducing machining time. Two coil chip conveyor and one chain chip conveyor remove the chips effectively. The machine is operated via an operator's panel, designed by Sky Master and made in Taiwan For more information please see the attached documents

x-travel 3200 mm︱y-travel 2000 mm︱z-travel 800 mm︱table-size 3200 x 1600 mm︱T-slot (width-distance-quantity) 8x 22 x 180 mm︱max. table load 10 t︱distance between columns 1840 mm︱distance spindle nose and table 180~980 mm︱spindle drive 22/26 kW︱max. torque on the spindle 560/662 Nm︱spindle nose 50 BT︱spindle speed 6000 U/min︱rapid traverse X,Y 20000 mm/min.︱rapid traverse Z-axis 15000 mm/min︱milling feed range 1~10000 mm/min︱Machine size (LxWxH) 8927 x 5217 x 4339 mm︱total power requirement 60 kva︱weight of the machine ca. 29 t︱positioning accuracy 0,025 (gem. VDI/DGQ3441) mm︱repeating accuracy 0,020 (gem. VDI/DGQ3441) mm︱

---

New Milling Machine KRAFT VM-3225 For more information please see the attached documents

x-travel 5000 mm︱y-travel 3600 mm︱z-travel 710 mm︱w-axis 1250 mm︱Main spindle: ︱turning speed range - main spindle 12000 min/-1︱power capacity - main spindel 45 kW︱tool taper HSK ︱work table: ︱table surface area 2100 x 4000 mm︱max. workpiece weight 43 t︱column daylight 2750 mm︱distance table - lower edge spindle 1880 mm︱Tool-Presetter: ︱number of toolpositions 60 pos.︱tool taper HSK ︱feeds: 8000 mm/min︱rapid traverse ( X / Y / Z ) 30/30/30 m/min︱rapid traverse W: 3 m/min︱control Mazatrol SmoothX ︱

---

Double-column, 5-Axis simultaneous Machining Center equipped with: - CNC-Control Mazatrol SmoothX - simultaneous 5 Axis Control Function - Relocation Detectro - Chip Conveyor - Hi-Pressure Coolant / Coolant through Spindle 1,5 MPA - Auto Tool Measur. & Break. detection - Scale Feedback System for x,y,z & w-axis - Work Setting Error Compensation - AAC (45kw / HSK) & ATC Tool Magazin 60-fold (HSK) - Synchronized Tapping - Auto Pecking Cycle with load detection - Spindle Shaper-Type Operation - G00 Slope Constant - Mazak Monitoring System B (RMP 600) Power-On Hours: 23.650h Auto-Run-Hours: 11.850h Auto-Cutting-Hours: 8.340h

x-travel 2400 mm︱y-travel 1500 mm︱z-travel 810 mm︱Control Heidenhain iTNC530 ︱total power requirement kW︱weight of the machine ca. 7.8 t︱dimensions of the machine ca. m︱

---

x-travel 2500 mm︱y-travel 3000 mm︱z-travel 1250 mm︱Control HEIDENHAIN iTNC530 ︱spindle turning speed range 22000 U/min︱tool change unit 50 -fach︱tool taper HSK 63 A ︱rated capacity kVA︱milling-head swivable +/- 110° ︱c-axis +-300° ︱total power requirement 130 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. 7,6 x 7,3 x 5,7 m︱

---

This ZIMMERMANN FZ33c is in a very good condition as new. The machine can be viewed under power by arrangement only until week 15. be inspected. Description: Technical data of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° incl. vibration sensor incl. bearing temperature sensor incl. rotary feed-through for inner KM-feed IKZ 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display Extraction system Keller Vario P1 Machine room roofing Tool changer 50-fold, chain magazine, behind the machine Chip conveyor, ejection 60° left, front side Renishaw RMP60 measuring probe Blum laser tool measurement "Control NT-Micro Clamping table Length x width x height 2500 x 3250 x 400mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged lengthwise 18H12 Distance between T-slots 250 mm Dimensions, weights Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection Voltage (three-phase) 400 V Frequency 50 Hz Fuse see installation plan Power requirement see installation plan Compressed air connection (on-site) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Linear axis drives Feed speed X-, Y-, Z-axis 60 m/min Axis acceleration X-, Y-, Z-axis up to 5 m/s² Drives rotary axes -VH30 Feed speed A-, C-axis 360 °/s Axis acceleration A-, C-axis 700 °/s² Resolution A-, C-axis 0.0001 Accuracies of linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0,028 mm Z-axis P= 0,020 mm Repeat accuracy X-axis Ps= 0.015 mm Y-axis Ps= 0,016 mm Z-axis Ps= 0,010 mm Resolution of the measuring systems (interpol) A-, C- axis 0,0001°. Accuracy rotary axes -VH30 Positioning accuracy A-, C- axis P= 12" = 0,0033°. Repeat accuracy A-, C- axis Ps= 8" = 0,0022°. Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% ED) 60kW, spindle speed 22.000 min-1, 95Nm, HSK-A63 Outer dimensions fork head L x W approx. 500 x 600 mm Nominal torque rotary axes control loop A: min. 1200 Nm C: min. 1047 Nm clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivel axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool clamping Hydraulic Permissible tool weight 4.5 kg (manufacturer's specification) Coolant supply outside and inside Coolant-lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40l/min at 20 bar Pump 2: 20l/min at 40 bar, Blowing air at the front of the milling spindle

x-travel 5.000 mm︱y-travel 3.750 mm︱z-travel 1.250 mm︱Control iTNC-530 HSCI ︱table-size 5.200 x 2.200 mm︱distance between columns 3.000 mm︱feeds 50.000 mm︱feeds 30.000 mm/min︱milling head 0.001º/0.001º ︱tool taper DIN 69871 AD 50 ︱number of spindle speeds 6.000 U/min/rpm︱transmission ratio 3 ︱spindle drive 43 kW︱tool change unit 20 - fach ( Vertikal) ︱Internal cooling system 20 bar︱Chip coveyor 2 ︱handwheel HEIDENHAIN HR-520 ︱total power requirement 122,89 kVA︱weight of the machine ca. 33 t︱Measuring system M&H PS 20.41 ︱

---

Headstocks: Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1:2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 2.000 rpm Automatic support for automatic head change (direct exit head) in the upper side of the right column INCLUDED Automatic support for automatic head change (45º head) in the lower side of the right column INCLUDED Tool changer and magazine: Tool change Vertical Magazine positions 20 Max tool diameter with adjacent positions 125 mm. Max tool diam. with adjacent positions free 240 mm. Max tool length 300 mm. Max tool weight 25 kg. Other equipment: Internal 20 Bar and external coolant 2 longitudinal chip conveyors 1 cross chip conveyor Knoll coolant system Integral protecting guards without ceiling ICAL system for head calibration Portable handwheel Part touch probe Water gun to clean parts Lamp under the bridge

x-travel 6800 mm︱y-travel 3400 mm︱z-travel 2000 mm︱Control HH iTNC 530 ︱table dimension - longitudinal 6000 mm︱table dimension - cross 2500 mm︱table load 10 t︱tool change unit 80 Pos.︱dist. between columns - front to rear 4700 mm︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. 12 x 11 x 7 m︱

---

This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, ***** Spindle DEFECTIVE !!! ***** 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱

---

x-travel 8000 mm︱y-travel 3800 mm︱z-travel 1250 mm︱

---

Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9 T slots dimensions: 22 mm Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 7200 / 5000 mm/min Weight and dimensions Maximum weight on table: 25000 Kg Machine weight: 60000 Kg Machine dimensions: 12700 x 5420 x 6033 mm Accesories Ec Guarding Electronic handwheel: HR-410

x-travel 8.000 mm︱y-travel 3.800 mm︱z-travel 1.250 mm︱Control HEIDENHAIN iTNC-530 ︱table-size 8.500 x 2.500 mm︱distance between columns 3.100 mm︱rapid travel x/y/z 10/12.000 mm/min︱feed 7.000 m/min︱milling head Automatisch Drehung ︱number of spindle speeds 4.000 U/min/rpm︱spindle drive 37 kW︱transmission ratio 2 Stufen︱table weight 35.000 Kg︱distance spindle /table 500-1.750 mm︱dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm︱tool change unit 30 pos.︱max. torque on the spindle 718 Nm︱spindle taper ISO ISO 50︱handwheel ︱dimension 19.370 x 5.850 x 5.970 mm︱

---

- 5 AXIS BRIDGE TYPE MILLING MACHINES Max height table to underside bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid Feed (X Axis) 10.000 mm/min Rapid Feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED B-Axis head swivel ± 190º C Axis head rotation ± 360º Spindle taper ISO 50 Spindle speed 4.000 r.p.m. Spindle Torque 718 Nm Portable Handwheel INCLUDED Thermal growth compensation system INCLUDED