,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Stamping press

          Machinelist: Stamping press


          Automatic Punching Press

          used Stamping press Automatic Punching Press BOSCHERT KST 25-500


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92333 · Automatic Punching Press

          BOSCHERT - KST 25-500 - - 1992 -

          Technical details
          pressure 25 t︱no. of strokes 40-160 Hub/min︱sheet width mm︱punch diameter 105 mm︱plate thickness 10 mm︱Stroke length 0-25 mm︱total power requirement 4 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 2,5x1,5x1,5 m︱
          Tool holders for die and punch, control panel with foot switch, support table.
            pressure 25 t
            no. of strokes 40-160 Hub/min
            punch diameter 105 mm
            plate thickness 10 mm
            Stroke length 0-25 mm
            total power requirement 4 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 2,5x1,5x1,5 m
            Description :
            Tool holders for die and punch,
            control panel with foot switch,
            support table.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Stamping press Automatic Punching Press BOSCHERT KST 25 - 500


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23058 · Automatic Punching Press

          BOSCHERT - KST 25 - 500 - - 1992 -

          Technical details
          pressure 250 kN t︱no. of strokes 40 - 160 Hub/min︱sheet width 10 mm︱working area 500 x 1000 mm︱max. punching diameter 105 mm︱length of stroke min./max. 0 - 25 mm︱total power requirement 6 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,2 x 1,5 x 1,7 m︱
            pressure 250 kN t
            no. of strokes 40 - 160 Hub/min
            sheet width 10 mm
            working area 500 x 1000 mm
            max. punching diameter 105 mm
            length of stroke min./max. 0 - 25 mm
            total power requirement 6 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,2 x 1,5 x 1,7 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Stamping press Automatic Punching Press BOSCHERT Bedienpanel


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05806 · Automatic Punching Press

          BOSCHERT - Bedienpanel - - 1980 -

          Technical details
          control panel Boschert Stanze ︱Year 1990
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            control panel Boschert Stanze
            Year 1990
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Automatic Punching Press - Double Column

          used Stamping press Automatic Punching Press - Double Column HAULICK & ROOS RVD 63-800


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15132 · Automatic Punching Press - Double Column

          HAULICK & ROOS - RVD 63-800 - - 1982 -

          Technical details
          pressure 63 t︱no. of strokes 70-420 Hub/min︱sheet width 160 mm︱ram - range of adjustment 80 mm︱ 300 mm︱table surface area 750x660 mm︱ram surface 690x460 mm︱total power requirement 11 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 2500x2500x3000 m︱
            pressure 63 t
            no. of strokes 70-420 Hub/min
            sheet width 160 mm
            ram - range of adjustment 80 mm
            300 mm
            table surface area 750x660 mm
            ram surface 690x460 mm
            total power requirement 11 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 2500x2500x3000 m


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Stamping press Automatic Punching Press - Double Column WEINGARTEN HD 160


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-175924 · Automatic Punching Press - Double Column

          WEINGARTEN - HD 160 - - 1978 -

          Technical details
          pressure 160 t︱no. of strokes 40 - 120 Hub/min︱sheet width mm︱total power requirement 40 kW︱
          Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)
            pressure 160 t
            no. of strokes 40 - 120 Hub/min
            total power requirement 40 kW
            Description :
            Pressing capacity 160 ton

            Table clamping area 1,100 x 1,280 mm
            Ram clamping area 850 x 890 mm
            Distance between guides 1,120 mm
            Distance between columns (below guide ways) 1,350 mm
            Distance between Table and ram in upper position approx. 400 mm

            No. of strokes 40 - 120 /min
            Adjustment of stoke 67 / 115 / 160 mm
            Ram adjustment, motor driven 125 mm
            Ejector travel 50 mm

            Total electrical load, approx. 40 kW - 500 V - 50 Hz
            Weight, approx. 24,000 kg

            Accessories / Special Features

            * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision.
            * 8-track slide bearing guide.
            * Automatic oil-circulation lubrication.
            * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake
            * Safety doors. * Motor-driven ram adjustment 125 mm.
            * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Stamping press Automatic Punching Press - Double Column KAISER PV 25 F


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-50003 · Automatic Punching Press - Double Column

          KAISER - PV 25 F - - 1973 -

          Technical details
          pressure 25 t︱no. of strokes 120 - 600 Hub/min︱sheet width / mm︱table surface area 360 x 400 mm︱ram adjustment 50 mm︱stroke 6 - 50 mm︱distance table - lower edge of ram 300 mm︱dimension of ram 250 x 250 mm︱total power requirement 4 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 1,6 x 1,1 x 2,3 m︱
          Safety device electro-pneumatic single disc clutch
            pressure 25 t
            no. of strokes 120 - 600 Hub/min
            sheet width / mm
            table surface area 360 x 400 mm
            ram adjustment 50 mm
            stroke 6 - 50 mm
            distance table - lower edge of r. 300 mm
            dimension of ram 250 x 250 mm
            total power requirement 4 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 1,6 x 1,1 x 2,3 m
            Description :
            Safety device electro-pneumatic single disc clutch


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Automatic Punching Press - Double Column KAISER PV 25 FN


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15157 · Automatic Punching Press - Double Column

          KAISER - PV 25 FN - - 1970 -

          Technical details
          pressure 25 t︱no. of strokes 60-300 Hub/min︱sheet width 150 mm︱ram - range of adjustment 6-50 mm︱table surface area 350x400 mm︱ram surface 250x250 mm︱hole in the table 130x150 mm︱weight of the machine ca. 3 t︱
            pressure 25 t
            no. of strokes 60-300 Hub/min
            sheet width 150 mm
            ram - range of adjustment 6-50 mm
            table surface area 350x400 mm
            ram surface 250x250 mm
            hole in the table 130x150 mm
            weight of the machine ca. 3 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact

          Beam punching line

          used Stamping press Beam punching line PEDDINGHAUS Peddiworker 800


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06597 · Beam punching line

          PEDDINGHAUS - Peddiworker 800 - - 1988 -

          Technical details
          JaStanzkraft 800 kN ︱frequency 50 Hz︱current 17/11 A︱voltage 220/380 V︱round bar steel 32-17 mm︱square edge steel 30-18 mm︱ 100 x 10 mm︱flat steel 350 x 16 mm︱throat 200 mm︱work height max. 1107 mm︱total power requirement 4 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 1200 x 700 x 1850 mm︱
            Ja
            Stanzkraft 800 kN
            frequency 50 Hz
            current 17/11 A
            voltage 220/380 V
            round bar steel 32-17 mm
            square edge steel 30-18 mm
            100 x 10 mm
            flat steel 350 x 16 mm
            throat 200 mm
            work height max. 1107 mm
            total power requirement 4 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 1200 x 700 x 1850 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Blanking Press - Double Column

          used Stamping press Blanking Press - Double Column BRUDERER BSTA 125 B


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00982 · Blanking Press - Double Column

          BRUDERER - BSTA 125 B - - 2000 - Bruderer

          Technical details
          pressure 125 t︱plate thickness 2 mm︱no. of strokes 100-1000 Hub/min︱Control Bruderer ︱total power requirement 50 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. ca. B 3 x L 6 x H2,9 m︱
            pressure 125 t
            plate thickness 2 mm
            no. of strokes 100-1000 Hub/min
            Control Bruderer
            total power requirement 50 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. ca. B 3 x L 6 x H2,9 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Stamping press Blanking Press - Double Column NISSHINBO HIQ-1250


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5638 · Blanking Press - Double Column

          NISSHINBO - HIQ-1250 - - 1999 -

          Technical details
          pressure - t︱plate thickness - mm︱no. of strokes - Hub/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure - t
            plate thickness - mm
            no. of strokes - Hub/min


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Stamping press Blanking Press - Double Column DIEFFENBACHER 320 x 1400


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-50015 · Blanking Press - Double Column

          DIEFFENBACHER - 320 x 1400 - - 1973 -

          Technical details
          pressure 320 t︱table-size 1400 x 1000 mm︱stroke 450 mm︱dayligth 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 2,7 x 1,4 x 5,3 m︱
          Oil pressure max.: 260 bar Compressed air supply: 6-8 bar
            pressure 320 t
            table-size 1400 x 1000 mm
            stroke 450 mm
            dayligth 800 mm
            dimensions of the machine ca. 2,7 x 1,4 x 5,3 m
            Description :
            Oil pressure max.: 260 bar
            Compressed air supply: 6-8 bar


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Blanking Press - Double Column AMINO MLSP 16W -04


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20228 · Blanking Press - Double Column

          AMINO - MLSP 16W -04 - - 12/2016 - Power Motion (FANUC)

          Technical details
          pressure 1600 t︱stroke 900 mm︱no. of strokes - Hub/min︱control Power Motion (FANUC) ︱main drive 170 x 4 pcs kW︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          Mechanical Link Servo Press A proprietary link mechanism designed for real-world production demands The unique link structures produces big power output from small power input. Amino link structure minimizes inertial energy, and enables optimum responsiveness. Enable a free-sliding motion as the main feature of a servo press with a simpler mechanism. Variable speed, positional control As the slide stroke is adjustable, the minimum necessary stroke can be used. Overload output can be set to suit the die, to avoid overloading the die. Speed can be set to reduce die contact noise, prolonging the die's lifetime and minimizing sound pollution. The motor is idled during pressurizing phase to minimize energy requirements during pressurizing at bottom dead center. Optional parameters allow this to be used as a trial press. Speed can be adjustable in response to the slide position. equipped with: - Control: Power Motion (FANUC) - Stroke Length: 900 mm - Slide Adjustment Range: 700 mm - Die Height: 1300 ~ 600 mm - Slide Table Area: 4500 x 2400 mm - Bolster Table Area: 4500 x 2400 mm - Side Opening: 2585 x 1500 mm -
            pressure 1600 t
            stroke 900 mm
            no. of strokes - Hub/min
            control Power Motion (FANUC)
            main drive 170 x 4 pcs kW
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            Mechanical Link Servo Press

            A proprietary link mechanism designed for real-world production demands
            The unique link structures produces big power output from small power input.
            Amino link structure minimizes inertial energy, and enables optimum
            responsiveness.
            Enable a free-sliding motion as the main feature of a servo press with a
            simpler mechanism.
            Variable speed, positional control

            As the slide stroke is adjustable, the minimum necessary stroke can be used.
            Overload output can be set to suit the die, to avoid overloading the die.
            Speed can be set to reduce die contact noise, prolonging the die's lifetime and
            minimizing sound pollution.
            The motor is idled during pressurizing phase to minimize energy requirements
            during pressurizing at bottom dead center.
            Optional parameters allow this to be used as a trial press.
            Speed can be adjustable in response to the slide position.

            equipped with:
            - Control: Power Motion (FANUC)
            - Stroke Length: 900 mm
            - Slide Adjustment Range: 700 mm
            - Die Height: 1300 ~ 600 mm
            - Slide Table Area: 4500 x 2400 mm
            - Bolster Table Area: 4500 x 2400 mm
            - Side Opening: 2585 x 1500 mm
            -



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact

          Blanking Press - Single Column

          used Stamping press Blanking Press - Single Column BAIER 45 A


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-989 · Blanking Press - Single Column

          BAIER - 45 A - - 1990 -

          Technical details
          no. of strokes 165 Hub/min︱pressure 3 t︱weight of the machine ca. 3 t︱
            no. of strokes 165 Hub/min
            pressure 3 t
            weight of the machine ca. 3 t


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact

          Fine Blanking Press

          used Stamping press Fine Blanking Press FEINTOOL HFA 320


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8 · Fine Blanking Press

          FEINTOOL - HFA 320 - - 1987 -

          Technical details
          pressure 320 t︱plate thickness 0 mm︱no. of strokes 80 Hub/min︱pressing capacity total 320 t︱stroke 30 - 80 mm︱table surface area unten: 630 x 740 mm︱table surface area oben: 630 x 630 mm︱Control ︱total power requirement 60 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW
            pressure 320 t
            no. of strokes 80 Hub/min
            pressing capacity total 320 t
            stroke 30 - 80 mm
            table surface area unten: 630 x 740 mm
            table surface area oben: 630 x 630 mm
            total power requirement 60 kW
            Description :
            This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019
            and is in new condition with new CE mark

            MAIN RAM
            total force (nominal) 320 to
            stroke min. 30 mm
            stroke 80 mm

            V-RING
            nominal force 160 to
            stroke 30 mm

            COUNTER RAM
            nominal force 80 to
            stroke 30 mm

            TOOL DIMENSIONS
            lower table - width 630 mm
            lower table - depth 740 mm
            upper table - width 630 mm
            upper table - depth 630 mm
            daylight max. 320 mm

            ELECTRICAL SPECIFICATIONS
            total power consumption 60 kW



        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Fine Blanking Press FEINTOOL-OSTERWALDE GKP-FS-25


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00881 · Fine Blanking Press

          FEINTOOL-OSTERWALDE - GKP-FS-25 - - 1979 -

          Technical details
          pressure 25 t︱plate thickness 4 mm︱no. of strokes 60-160 Hub/min︱total power requirement 9 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            pressure 25 t
            plate thickness 4 mm
            no. of strokes 60-160 Hub/min
            total power requirement 9 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact

          Hydraulic steelworker

          used Stamping press Hydraulic steelworker LVD Alpha 1012 Strippit


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3234 · Hydraulic steelworker

          LVD - Alpha 1012 Strippit - - 2003 - Cadman CNC

          Technical details
          punching pressure 16 t︱plate thickness 8 mm︱plate length max. 1250 mm︱sheet width - max. 1000 mm︱engine output 13 kW︱control Cadman CNC ︱voltage 400 V︱weight of the machine ca. 8,3 t︱dimensions of the machine ca. 3600 x 2300 x 2000 m︱
            punching pressure 16 t
            plate thickness 8 mm
            plate length max. 1250 mm
            sheet width - max. 1000 mm
            engine output 13 kW
            control Cadman CNC
            voltage 400 V
            weight of the machine ca. 8,3 t
            dimensions of the machine ca. 3600 x 2300 x 2000 m


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PUMA 80 SD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-563 · Hydraulic steelworker

          GEKA - PUMA 80 SD - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien23100 €︱ 473.55 €︱ 80 to︱ 750 mm︱ 40x14 mm︱ 40 1/min︱ 9 kW︱ 1700 mm︱ 1300 mm︱ 2050 mm︱ 1715 kg︱
          hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            23100 €
            473.55 €
            80 to
            750 mm
            40x14 mm
            40 1/min
            9 kW
            1700 mm
            1300 mm
            2050 mm
            1715 kg
            Description :
            hydraulic drive
            table with gauge
            user manual in GERMAN and ENGLISH

            CNC options on request

            We have a big stock of punches and dies for immediate dispatch

            WE HAVE MORE THAN 700 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PP-50 G


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-569 · Hydraulic steelworker

          GEKA - PP-50 G - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien8200 €︱ 169.74 €︱ 50 to︱ 130 mm︱ 13/27 mm︱ 23 1/min︱ 3 kW︱ 1100 mm︱ 900 mm︱ 1550 mm︱ 355 kg︱
          portable, hydraulic punching machine table with gauge foot pedal user manual in German or English
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            8200 €
            169.74 €
            50 to
            130 mm
            13/27 mm
            23 1/min
            3 kW
            1100 mm
            900 mm
            1550 mm
            355 kg
            Description :
            portable, hydraulic punching machine
            table with gauge
            foot pedal
            user manual in German or English


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PAXY 1000 x 500 CNC Stanzmasch


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-571 · Hydraulic steelworker

          GEKA - PAXY 1000 x 500 CNC Stanzmasch - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufSpanien110 to︱ 4-30 mm︱
          punching unit with hydraulic stripper hydraulic material clamps X- und Y- axis on ballscrews,each with servo motor CNC control Omron Flash memory Touchscreen OPTIONAL EQUIPMENT: TRIPLE PUNCHING UNIT: 31/31/31 MM € 4.500,- central punch: 100 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/20 mm lateral punches 75 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/18 mm TRIPLE PUNCHING UNIT: 31/40/31 MM € 5.100,- central punch: 100 % of punching force max. Dm. 40 mm max. thickness 20 mm max. Dm./thickness 40/20 mm lateral punches 60 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness: 31/15 mm triple punching unit with marking station: punching capacity as above max. thickness 20 mm marking force 700 kN max. 10 characters, interchangeable dimensions of characters 10 x 7 mm MODEL 31/31/31 € 9.300,- MODEL 31/40/31 € 9.900,- CNC CONTROL GEKA PROPC € 5.300,- bigger display dxf Import visualstion of product DRILLING UNIT UP TO 40 MMon request All capacities based on steel 450 N/² max. length of sheet "X" axis: 1000 mm max. width of sheet "Y" axis: 500 mm Max. hole diameter: 40 mm diameter/thickness: 40/20 or 28/28 mm max. traverse speed per axis: 24 m/min max. combined traverse speed: 34 m/min positioning tolerance: 0,2 mm repeatability: 0,1 mm
            neu
            ca. 12 - 14 Wochen ab Auf
            Spanien
            110 to
            4-30 mm
            Description :
            punching unit with hydraulic stripper
            hydraulic material clamps
            X- und Y- axis on ballscrews,each with servo motor
            CNC control Omron
            Flash memory
            Touchscreen

            OPTIONAL EQUIPMENT:

            TRIPLE PUNCHING UNIT:

            31/31/31 MM

            4.500,-

            central punch:
            100 % of punching force
            max. Dm. 31 mm
            max. thickness 20 mm
            max. Dm./thickness 31/20 mm
            lateral punches
            75 % of punching force
            max. Dm. 31 mm
            max. thickness 20 mm
            max. Dm./thickness 31/18 mm

            TRIPLE PUNCHING UNIT:

            31/40/31 MM

            5.100,-

            central punch:
            100 % of punching force
            max. Dm. 40 mm
            max. thickness 20 mm
            max. Dm./thickness 40/20 mm
            lateral punches
            60 % of punching force
            max. Dm. 31 mm
            max. thickness 20 mm
            max. Dm./thickness: 31/15 mm

            triple punching unit with
            marking station:

            punching capacity as above
            max. thickness 20 mm
            marking force 700 kN
            max. 10 characters, interchangeable
            dimensions of characters 10 x 7 mm

            MODEL 31/31/31

            9.300,-

            MODEL 31/40/31

            9.900,-

            CNC CONTROL GEKA PROPC

            5.300,-

            bigger display
            dxf Import
            visualstion of product

            DRILLING UNIT UP TO 40 MMon request All capacities based on steel 450 N/²

            max. length of sheet "X" axis:
            1000 mm

            max. width of sheet "Y" axis:
            500 mm

            Max. hole diameter:
            40 mm

            diameter/thickness:
            40/20 or 28/28 mm

            max. traverse speed per axis:
            24 m/min

            max. combined traverse speed:
            34 m/min

            positioning tolerance:
            0,2 mm

            repeatability:
            0,1 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PUMA 80 S


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-561 · Hydraulic steelworker

          GEKA - PUMA 80 S - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien16900 €︱ 346.45 €︱ 80 to︱ 510 mm︱ 40x14 mm︱ 40 1/min︱ 9 kW︱ 1700 mm︱ 1300 mm︱ 2050 mm︱ 1715 kg︱
          hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            16900 €
            346.45 €
            80 to
            510 mm
            40x14 mm
            40 1/min
            9 kW
            1700 mm
            1300 mm
            2050 mm
            1715 kg
            Description :
            hydraulic drive
            table with gauge
            user manual in GERMAN and ENGLISH

            CNC options on request

            We have a big stock of punches and dies for immediate dispatch

            WE HAVE MORE THAN 700 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PUMA 110 S


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-565 · Hydraulic steelworker

          GEKA - PUMA 110 S - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien20800 €︱ 426.4 €︱ 110 to︱ 500 mm︱ 40x20 mm︱ 28 1/min︱ 9 kW︱ 2080 mm︱ 1300 mm︱ 2050 mm︱ 3150 kg︱
          hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            20800 €
            426.4 €
            110 to
            500 mm
            40x20 mm
            28 1/min
            9 kW
            2080 mm
            1300 mm
            2050 mm
            3150 kg
            Description :
            hydraulic drive
            table with gauge
            user manual in GERMAN and ENGLISH

            CNC options on request

            We have a big stock of punches and dies for immediate dispatch

            WE HAVE MORE THAN 700 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PUMA 55 SD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-559 · Hydraulic steelworker

          GEKA - PUMA 55 SD - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien16100 €︱ 330.05 €︱ 55 to︱ 750 mm︱ 40x10 mm︱ 37 1/min︱ 5 kW︱ 1930 mm︱ 1200 mm︱ 1800 mm︱ 1885 kg︱
          hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES!
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            16100 €
            330.05 €
            55 to
            750 mm
            40x10 mm
            37 1/min
            5 kW
            1930 mm
            1200 mm
            1800 mm
            1885 kg
            Description :
            hydr. drive
            Support table with stop
            Operating instructions in GERMAN and ENGLISH

            CNC options on request

            We have an extensive stock of punches and dies at your immediate disposal.

            WE HAVE MORE THAN 700 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Stamping press Hydraulic steelworker GEKA PUMA 55 S


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-111 · Hydraulic steelworker

          GEKA - PUMA 55 S - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien11900 €︱ 243.95 €︱ 155 to︱ 500 mm︱ 40 x 10 mm︱ 37 1/min︱ 5 kW︱ 1550 mm︱ 1200 mm︱ 1950 mm︱ 1150 kg︱
          hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            11900 €
            243.95 €
            1
            55 to
            500 mm
            40 x 10 mm
            37 1/min
            5 kW
            1550 mm
            1200 mm
            1950 mm
            1150 kg
            Description :
            hydraulic drive
            table with gauge
            user manual in GERMAN and ENGLISH

            CNC options on request

            We have a big stock of punches and dies for immediate dispatch

            WE HAVE MORE THAN 700 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Notching Press

          used Stamping press Notching Press SCHULER N 8 N


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-243003 · Notching Press

          SCHULER - N 8 N - - 2000 - CNC / Notchmaster

          Technical details
          pressure 8 t︱throat 350 mm︱stroke 9,5 mm︱no. of strokes 180 - 1300 /min︱distance table/ram, max. stroke up, adjustment up 214 mm︱table surface area 400 x 220 mm︱Table height above floor 980 mm︱ram surface 190 x 170 mm︱ram adjustment 25 mm︱diameter of blanks 900 mm︱no. of flutes 1 - 999 ︱material thickness 2,0 mm︱distance between mid parts spindle and mid ram 35/65 - 450 mm︱lift stroke 42 mm︱punch stroke 3 mm︱power requirement 40,0 kW︱Weight 6,1 kg︱dimensions of the machine (WxDxH) 2,6 x 1,3 x 2,2 m︱
          with infinitely variable drive, pneumatic clutch-brake combination (make Ortlinghaus), manual ram adjustment, pneumatic blank clamping, intermittent control II, ram lifting device for lift stroke, automatic stripping device, circular oil lubrication, noise enclosure with movable safety guard, Notchmaster control with process visualization via screen/display slide conveyor (make Neuhäuser, type 2.090-0, yom 1996) Distance between mid parts spindle and mid ram approx. 35/65 - 450 mm lift stroke approx. 42 mm punch stroke approx. 3 mm
            pressure 8 t
            throat 350 mm
            stroke 9,5 mm
            no. of strokes 180 - 1300 /min
            distance table/ram, max. stroke . 214 mm
            table surface area 400 x 220 mm
            Table height above floor 980 mm
            ram surface 190 x 170 mm
            ram adjustment 25 mm
            diameter of blanks 900 mm
            no. of flutes 1 - 999
            material thickness 2,0 mm
            distance between mid parts spind. 35/65 - 450 mm
            lift stroke 42 mm
            punch stroke 3 mm
            power requirement 40,0 kW
            Weight 6,1 kg
            dimensions of the machine (WxDxH. 2,6 x 1,3 x 2,2 m
            Description :
            with infinitely variable drive, pneumatic clutch-brake combination (make Ortlinghaus), manual ram adjustment, pneumatic blank clamping, intermittent control II, ram lifting device for lift stroke, automatic stripping device, circular oil lubrication, noise enclosure with movable safety guard, Notchmaster control with process visualization via screen/display
            slide conveyor (make Neuhäuser, type 2.090-0, yom 1996)
            Distance between mid parts spindle and mid ram approx. 35/65 - 450 mm
            lift stroke approx. 42 mm
            punch stroke approx. 3 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Your next stamping press is waiting at LagerMaschinen
          Ideal stamping presses for your unique business needs

          Stamping is one of several popular methods for shaping materials in the metalworking industry. Stamping machines operate by shaping metals around a bending die. A stamping press can be mechanically or hydraulically operated. The former offers operators a much faster rate of production and is ideal for situations where high levels of output are required, while the latter is favoured when a constant force is required while pressing. No matter which stamping press is right for you, youll find a wide variety of used machines at LagerMaschinen.

          Find the perfect used machines for your workplace at LagerMaschinen

          Stamping presses are invaluable in a wide variety of industrial metalworking sectors. From the production of automotive parts to the crafting of everyday household items, a stamping press is an efficient and effective metal forging process. Typically, a stamping press has an electronically controlled system which feeds materials into the press, meaning very little manpower is required for high levels of production. Shop conveniently online for your next stamping press by visiting LagerMaschinen.

          The easiest way to find used machines is at LagerMaschinen

          Shopping online for used machines offers potential buyers a number of advantages. You can browse comfortably from your home or office at your leisure. You can sort your results by size, model, location or price, allowing you to find the best stamping press, band saw, grinding machine, etc. for your business needs. LagerMaschinen has taken the hassle out of the used machine buying experience by offering users an easy-to-use online marketplace for the best used machines in Europe.