Erosion machines

table length 600 mm︱table width 400 mm︱x-axis 400 mm︱y-axis 300 mm︱z-axis 350 mm︱workpiece sizes 900 x 630 x 350 mm︱volume 490 L︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- 600 x 400 EROWA UPC 320 - Generator: AGIEVISION 5 MODULO SUPERFINISH - hours 45144h

table length 500 mm︱table width 400 mm︱x-axis 350 mm︱y-axis 250 mm︱z-axis 300 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Dimensions of the extendable tray 800 x 500 x 370 mm. Maximum electrode weight 20 kg. Maximum weight on the pallet 50 kg. 54 electrode changers. EROWA UCP 320 8-fold pallet changer (NOT INCLUDED) ISOPULSE 64 A GENERATOR with PILOT EXPERT 2-3, POWER CONTROL EXPERT, MICRO MACHINING SPAC C-axis with a moment of inertia of 2,000 kg x cm2.

table length 850 mm︱table width 550 mm︱ampere 70 A︱control CNC MITSUBISHI 32bit ︱axis stroke (X,Y,Z) 550 / 850 / 450 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 2,4 x 2,65 x 2,68 m︱

---

Spark Erosion Machine / Cavity Sinking EDM Machine The machine is in a very good condition. Equipment / Eccessories: - Y-travel at electrode change and loading position: 1180 mm - integrated C-axis working head speed adjustable: 10/20 rpm - integrated C-axis / working head measuring resolution: 0.001 mm - load capacity without changer: 50 kg - load capacity with changer: 10 kg - max. head load: 200 kg - max. distance tool carrier plate to work table: 585 cm - min. distance tool carrier plate to work table: 125 mm - working tank: - lifting tank dimensions (W x D x H ): 800 x 1100 x 480 mm - dielectric height programmable/automatic: 440 mm - filter cartridge version: cartridges integrated - electrode changing system / pick-up plate magazine Positions: 20 - electrode weight /single electrode: 15 kg - total changer: 60 kg - generator FP 70 Ampere, multipulse - electrode changer: 20-fold pick-up linear changer - electric hand-operated bottle - C0² fire extinguishing system integrated / dielectric cartridge filter system

table length 500 mm︱table width 250 mm︱ampere 50 A︱x-axis 290 mm︱y-axis 200 mm︱z-axis 300 mm︱total power requirement 6 kW︱weight of the machine ca. 1100 kg︱dimensions of the machine ca. m︱

---

CNC-Controlled Die Sinker

table length 450 mm︱table width 350 mm︱ampere 25 A︱x-travel 300 mm︱y-travel 200 mm︱z-travel 300 mm︱spindle turning speed range 60 U/min︱distance table - lower edge spindle 480 mm︱control HEIDENHAIN ︱total power requirement 7,5 kVA︱weight of the machine ca. 1,4 t︱dimensions of machine L x W x H 1,2 x 1,1 x 2,2 m︱dimensions of switch cabinet 1,1 x 0,6 x 2,0 m︱

---

Accessories: electron. handwheel

table length 1000 mm︱table width 700 mm︱ampere 72 A︱x-axis 500 mm︱y-axis 350 mm︱z-axis 500 mm︱table load 400 kg︱max. size of workpiece LxWxH 1000x700 mm︱total power requirement 9 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,5x1,9x3 m︱

---

Machine is ready for use with accessories see pictures

travel: . ︱x-axis 350 mm︱y-axis 250 mm︱z-axis 340 mm︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

travel: . ︱x-axis 360 mm︱y-axis 250 mm︱z-axis 350 mm︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

table length 430 mm︱table width 300 mm︱x-travel 260 mm︱y-travel 160 mm︱z-travel 300 mm︱weight of the machine ca. 0,5 t︱

---

table length 486 mm︱table width 280 mm︱ampere A︱axis stroke (X,Y,Z) 300 200 300 mm︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱

---

︱table width 700 mm︱ ︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

table-size 800 x 500 mm︱workpiece height +-30º/510 mm︱travel x / y / z 800 x 550 x 510 mm︱workpiece sizes 1300 x 1000 x 510 mm︱workpiece weight 3.000 kg︱wire dia. 0,10-0,33 mm︱

---

-workng hours 13271h

weight 3000 kg︱voltage 3 x 400 V︱output 8,3 kw︱ampere 12 ︱

---

voltage 3 x 400 V︱weight 3600 kg︱output 9 kw︱

---

frequency 50 Hz︱weight 3000 kg︱voltage 3 x 400 V︱output 8,3 kw︱ampere 12 ︱

---

table-size 650 x 450 mm︱workpiece height 219 / 560 mm︱three-axis-real value indicator x,y,z ︱Control MF4 Fuzzylogik ︱x-travel 500 mm︱y-travel 350 mm︱z-travel 350 mm︱table load 1 t︱weight of the machine ca. 4,2 t︱dimensions 2,0 x 1,4 x 2,6 mm︱generator 45 A kW︱

---

travel: . ︱x-axis 350 mm︱y-axis 250 mm︱z-axis 220 mm︱

---

In our opinion, the machine is in good used condition and can be inspectedunder power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 550 mm︱y-travel 350 mm︱z-travel 400 mm︱U-travel 550 mm︱V- travel 350 mm︱volume 1200 L︱material diameter: round 1200x700x400 mm︱workpiece weight 1500 kg︱inclination +/-30°/400 mm °︱thread dia. 0,10-0,33 ︱Bobbin Weight max. 25 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

EDM TIME 21.196 hours.

x-axis 350 mm︱y-axis 250 mm︱z-axis 256 mm︱U-axis +/-70 mm︱V-axis +/-70 mm︱dimension of workpiece 750 x 550 x 256 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

-edm hours 29559h

table length 700 mm︱table width 400 mm︱control fanuc 310 s wa ︱x-axis 520 mm︱y-axis 370 mm︱U-axis +/- 60 mm︱V-axis +/- 60 mm︱Konikangle (100mm) +/- 30 °︱z-axis 410 mm︱max. workpiece sizes 600 x 420 mm︱max. workpiece height 400 mm︱max. workpiece weight 400 kg︱rapid traverse 0,9 m/min︱interval size of the actuator 0,001 mm︱wire dia. 0,1 - 0,30 mm︱wire speed 0 - 15 m/min︱wire clamping 200 - 2.500 g︱total power requirement ~ 14 kVA︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 3,2 x 2,5 x 2,1 m︱

---

Wire Eroding Machine MATRA-FANUC - RoboCut Alpha 0B - automatic wire threading

travel -x axis 800 mm︱travel -y axis 500 mm︱workpiece sizes 1.300 x 1000 x 510 U/min︱ampere 60 A︱workpiece weight 3.000 kg︱Control CNC VISION 5 ︱z-axis 525 mm︱U-axis 800 mm︱V-axis 500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

-Max. Taper 30º/500 mm. -Height 525mm. -Generator VERTEX de 60 Amp. -hours: 37287h

table length 500 mm︱table width 350 mm︱ampere 65 A︱Control AGIEVISION 5 CNC ︱total power requirement 20 kW︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. m︱

---

A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

x-travel 350 mm︱y-travel 250 mm︱z-travel 256 mm︱max. size of workpiece 750 x 550 x 250 mm︱U-axis +/- 70 mm︱V-axis +/- 70 mm︱rapid traverse X/Y/Z axis 1,5 / 1,5 / 0,6 m/min︱rapid traverse U/V-axis 0,6 m/min︱max. concentricity 30° / 100 mm ︱control AGIEVISION ︱wire dia. 0,1 - 0,33 mm︱speed of wire 60 - 300 mm/sec︱wire retraction halbautomatisch ︱total power requirement 9,1 kVA︱weight of the machine ca. 3,6 t︱dimensions 2,21 x 2,21 x 2,22 m︱

---

table length 650 mm︱table width 450 mm︱ampere 45 A︱x-axis 500 mm︱y-axis 350 mm︱z-axis 350 mm︱control Multiform 4 Fuzzylogik ︱workpiece height max. 560 mm︱max. workpiece weight 1000 kg︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2 x 1,4 x 2,6 m︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***