,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:
          used Metal Processing Bench Drilling Machine MAXION ECOMAX 14
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION ECOMAX 14
          Bench Drilling Machine

          neu

          bore capacity in steel (diameter) 14 /15 mm
          throat 180 mm
          bore stroke 70 mm
          MAXION - ECOMAX 14
          Bench Drilling Machine
          Request / Contact
          used Metal Processing Bench Drilling Machine MAXION UNIMAX 1 Frequenz
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION UNIMAX 1 Frequenz
          Bench Drilling Machine

          neu

          bore capacity in steel (diameter) 15 / 18 mm
          throat 180 mm
          bore stroke 80 mm
          MAXION - UNIMAX 1 Frequenz
          Bench Drilling Machine
          Request / Contact
          used Metal Processing Bench Drilling Machine MAXION UNIMAX 1 TAP
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION UNIMAX 1 TAP
          Bench Drilling Machine

          neu

          bore capacity in steel (diameter) 15 / 18 mm
          throat 180 mm
          bore stroke 80 mm
          MAXION - UNIMAX 1 TAP
          Bench Drilling Machine
          Request / Contact
          used Metal Processing Bench Drilling Machine MAXION BT 25 ST
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          MAXION BT 25 ST
          Bench Drilling Machine

          1998

          bore capacity in steel (diameter) 25,0 / 30,0 mm
          throat 260 mm
          bore stroke 120 mm
          MAXION - BT 25 ST
          Bench Drilling Machine
          Request / Contact
          used Metal Processing Bench Drilling Machine MAXION BT 18
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          MAXION BT 18
          Bench Drilling Machine

          bore capacity in steel (diameter) 18,0 mm
          bore capacity in cast iron 23,0 mm
          throat 2250 mm
          MAXION - BT 18
          Bench Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION BS 25 ST
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          MAXION BS 25 ST
          Pillar Drilling Machine

          2000

          bore capacity in steel (diameter) 25,0 / 30,0 mm
          throat 260 mm
          bore stroke 120 mm
          MAXION - BS 25 ST
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION UNIMAX 3 TAP
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION UNIMAX 3 TAP
          Pillar Drilling Machine

          -NEU-

          bore capacity in steel 30 mm
          threading cutting capacity: M20
          throat 260 mm
          MAXION - UNIMAX 3 TAP
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION UNIMAX 3
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION UNIMAX 3
          Pillar Drilling Machine

          -NEU-

          bore capacity in steel 30 mm
          threading cutting capacity: M20
          throat 260 mm
          MAXION - UNIMAX 3
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION UNIMAX 4 Basic
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION UNIMAX 4 Basic
          Pillar Drilling Machine

          -NEU-

          bore capacity in steel 40 mm
          threading cutting capacity: M30
          throat 310 mm
          MAXION - UNIMAX 4 Basic
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION UNIMAX 3 AV
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          MAXION UNIMAX 3 AV
          Pillar Drilling Machine

          -NEU-

          bore capacity in steel 30 mm
          threading cutting capacity: M20
          throat 260 mm
          MAXION - UNIMAX 3 AV
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION BS MK 3
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          MAXION BS MK 3
          Pillar Drilling Machine

          Boring power 32.0 mm
          bore capacity in cast iron 35.0 mm
          morse taper MK 3
          MAXION - BS MK 3
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION BS 20
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          MAXION BS 20
          Pillar Drilling Machine

          bore capacity in steel (diameter) 20,0 mm
          bore capacity in cast iron 25,0 mm
          throat 210 mm
          MAXION - BS 20
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Pillar Drilling Machine MAXION BS 35 ST G
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          MAXION BS 35 ST G
          Pillar Drilling Machine

          bore capacity in steel (diameter) 35 mm
          throat 280 mm
          bore stroke 150 mm
          MAXION - BS 35 ST G
          Pillar Drilling Machine
          Request / Contact
          used Metal Processing Plate Bending Machine  - 3 Rolls AKYAPAK 1030 x 70
          Kurt Steiger Werkzeugmaschinen GmbH   Wiesbaden Flachstr. 11 Deutschland

          Kurt Steiger Werkzeugmaschinen GmbH
          AKYAPAK 1030 x 70
          Plate Bending Machine - 3 Rolls

          1998

          sheet width mm
          plate thickness mm
          pre-bending 0
          AKYAPAK - 1030 x 70
          Plate Bending Machine - 3 Rolls
          Request / Contact
          used Metal Processing Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/86
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/86
          Plate Bending Machine - 4 Rolls

          Neu / New

          sheet width 3100 mm
          plate thickness 100 mm
          pre-bending 86
          AKYAPAK - AHS 30/86
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Metal Processing Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/32
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/32
          Plate Bending Machine - 4 Rolls

          Neu / New

          sheet width 3100 mm
          plate thickness 40 mm
          pre-bending 32
          AKYAPAK - AHS 30/32
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Metal Processing Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/40
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/40
          Plate Bending Machine - 4 Rolls

          NEU / NEW

          sheet width 3100 mm
          plate thickness 50 mm
          pre-bending 40 mm
          AKYAPAK - AHS 30/40
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Metal Processing Section Bender AKYAPAK APK 45
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 45
          Section Bender

          NEU

          I - beam section - flat steel 80 x 15 (d600) mm
          I-beam section - upend 60 x 10 (d800) mm
          L-beam 45 x 5 (d600) mm
          AKYAPAK - APK 45
          Section Bender
          Request / Contact
          used Metal Processing Section Bender AKYAPAK APK 61
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 61
          Section Bender

          NEU

          I - beam section - flat steel 80 x 20 (d 1200) mm
          I-beam section - upend 80 x 25 (d 2100) mm
          L-beam 50 x 50 x 6 (d 1000) mm
          AKYAPAK - APK 61
          Section Bender
          Request / Contact
          used Metal Processing Section Bender AKYAPAK APK 81
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 81
          Section Bender

          NEU

          I - beam section - flat steel 120 x 30 (d600) mm
          I-beam section - upend 100 x 20 (d2100) mm
          L-beam 80x80x8 (d2000) mm
          AKYAPAK - APK 81
          Section Bender
          Request / Contact
          used Metal Processing Section Bender AKYAPAK APK 30
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          AKYAPAK APK 30
          Section Bender

          2007

          I - beam section - flat steel 50 x 10 mm
          I-beam section - upend 80 x 15 mm
          I-beam section - upend 80 x 15 mm
          AKYAPAK - APK 30
          Section Bender
          Request / Contact
          used Metal Processing Rotary Welding Table AKYAPAK SRH 1000
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK SRH 1000
          Rotary Welding Table

          Neu

          table diameter 900 mm
          table load 1.000 kg
          Frontal Loading Center (A) 150 mm
          AKYAPAK - SRH 1000
          Rotary Welding Table
          Request / Contact
          used Metal Processing Rotary Welding Table - Round Surface AKYAPAK SRP - 5
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRP - 5
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 1525 mm
          table load 5,0 t
          swivelling range 135° deg.
          AKYAPAK - SRP - 5
          Rotary Welding Table - Round Surface
          Request / Contact
          used Metal Processing Rotary Welding Table - Round Surface AKYAPAK SRH - 7000
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRH - 7000
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 1300 mm
          table load 7,0 t
          swivelling range 0 - 110° deg.
          AKYAPAK - SRH - 7000
          Rotary Welding Table - Round Surface
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          The right used metal processing machines at LagerMaschinen.de
          Used metal processing machines for every occasion

          Metalworking comprises a variety of applications involving the manipulation of metal from large-scale production of metals including lathing milling and cutting to smaller operations such as jewellery working. No matter the application used metal processing machines present an ideal way of obtaining the equipment you need at a price you can afford. Used metal processing machines such as milling machines can be manually operated or using computer numeric control which increases the overall precision of the machine. The type of used metal processing machines you need depends on the applications you use but at LagerMaschinen.de you are sure to find what you’re looking for.

          The right machine for every field of application

          Used metal processing machines can be used in several fields. Companies active in the computer industry can obtain used metal processing machines for circuit board soldering and companies that need to bond different pieces can find the welding machines that they need. If your company is in the business of making the precision parts needed to make other precision machines then used grinding machines can be a great way to expand or refurbish your production lines. Used metal processing machines can also be found for lathing drilling milling and several other uses.

          Used equipment from LagerMaschinen.de

          No matter the type of equipment you will find the used metal processing machines you need at LagerMaschinen.de. With its international network of suppliers this platform can provide you with the used metal processing machines you need at a price you can afford.