,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Bench Lathe

          Machinelist: Bench Lathe


          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used Lathes CNC Lathe - Inclined Bed Type HAAS SL 30


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03588 · CNC Lathe - Inclined Bed Type

          HAAS - SL 30 - - 2018 - Haas

          Technical details
          turning diameter 762 mm︱turning length 864 mm︱control Haas ︱chucking diameter 254 mm︱hollow 76 mm︱swing diameter 762 mm︱turning speeds 3400 U/min︱output 407 Nm︱Power 22 KW︱Tool changer 12 VDI 40 ︱transmission ratio 2 ︱hydraulic tailstock ︱total power requirement kW︱weight of the machine ca. 7.3 T t︱dimensions of the machine ca. 3.3 X 2 X 1.9 H m︱
          with manual guide (HAAS control) WIT C AXIS AND LIVE TOOLS CHIP CONVOYER TAILSTOCK
            turning diameter 762 mm
            turning length 864 mm
            control Haas
            chucking diameter 254 mm
            hollow 76 mm
            swing diameter 762 mm
            turning speeds 3400 U/min
            output 407 Nm
            Power 22 KW
            Tool changer 12 VDI 40
            transmission ratio 2
            weight of the machine ca. 7.3 T t
            dimensions of the machine ca. 3.3 X 2 X 1.9 H m
            Description :
            with manual guide (HAAS control)
            WIT C AXIS AND LIVE TOOLS
            CHIP CONVOYER TAILSTOCK


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type TSUGAMI MO8 DE


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03932 · CNC Lathe - Inclined Bed Type

          TSUGAMI - MO8 DE - - 2017 - FANUC Oi TD

          Technical details
          turning diameter 260 mm︱turning length 400 mm︱control FANUC Oi TD ︱Spindle Bore: 66 mm︱turning speed range - spindle 4500 U/min︱feed range - turret / stepless 1 - 12000 mm/min︱rapid traverse 24/27 m/min︱ 1 Stück︱ 12 Stationen︱tool taper Direktaufnahme ︱total power requirement 30 kW︱weight of the machine ca. 5.6 t︱dimensions of the machine ca. 2500 C 1850 X 1750 mm︱ JAJAJAJAJA
          CNC FANUC C AXIS AND MOOWING TOOLS VERY NICE tailstol chip convoyeur turret 12 positions
            turning diameter 260 mm
            turning length 400 mm
            control FANUC Oi TD
            Spindle Bore: 66 mm
            turning speed range - spindle 4500 U/min
            feed range - turret / stepless 1 - 12000 mm/min
            rapid traverse 24/27 m/min
            1 Stück
            12 Stationen
            tool taper Direktaufnahme
            total power requirement 30 kW
            weight of the machine ca. 5.6 t
            dimensions of the machine ca. 2500 C 1850 X 1750 mm
            JA
            JA
            JA
            JA
            JA
            Description :
            CNC FANUC C AXIS AND MOOWING TOOLS VERY NICE
            tailstol
            chip convoyeur
            turret 12 positions


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type LEADWELL F 1


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03996 · CNC Lathe - Inclined Bed Type

          LEADWELL - F 1 - - 2016 - FANUC O I TC

          Technical details
          turning diameter 440 mm︱turning length 420 mm︱control FANUC O I TC ︱travel -x axis 140 mm︱ 460 mm︱Spindle Bore: 62 mm︱Number of Turrets: 1 Stück︱no. of tools in turret 1 12 Stück︱ 4000 U/min︱power capacity 11 kW︱spindle nose A2-5 ︱feed range 1 - 15000 mm/min︱rapid traverse 30 m/min︱
          CNC FANUC OI TB 2 AXIS WITH CHUCK AND TAILSTOCK
            turning diameter 440 mm
            turning length 420 mm
            control FANUC O I TC
            travel -x axis 140 mm
            460 mm
            Spindle Bore: 62 mm
            Number of Turrets: 1 Stück
            no. of tools in turret 1 12 Stück
            4000 U/min
            power capacity 11 kW
            spindle nose A2-5
            feed range 1 - 15000 mm/min
            rapid traverse 30 m/min
            Description :
            CNC FANUC OI TB
            2 AXIS
            WITH CHUCK AND TAILSTOCK


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type WAGNER WDC 480


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03885 · CNC Lathe - Inclined Bed Type

          WAGNER - WDC 480 - - 2014 - SIEMENS 828 D

          Technical details
          turning diameter 295 mm︱turning length 1250 mm︱control SIEMENS 828 D ︱max. swing diameter 460 mm︱spindle head KK6 DIN 55026 ︱bar material dia. 52 mm︱turning speed range 3500 U/min︱spindle drive 7 kW︱Torque 151 Nm︱tool diameter 32 mm︱rapid traverse 30/15 m/min︱total power requirement 18 kW︱weight of the machine ca. 3.4 t︱dimensions of the machine ca. 2,5 x 1,7 x 1,8 m︱power chuck 210 mm
          CNC SIEMENS 828 D TURRET VDI 30 with REITSTOCK CHIP CONVOYER
            turning diameter 295 mm
            turning length 1250 mm
            control SIEMENS 828 D
            max. swing diameter 460 mm
            spindle head KK6 DIN 55026
            bar material dia. 52 mm
            turning speed range 3500 U/min
            spindle drive 7 kW
            Torque 151 Nm
            tool diameter 32 mm
            rapid traverse 30/15 m/min
            total power requirement 18 kW
            weight of the machine ca. 3.4 t
            dimensions of the machine ca. 2,5 x 1,7 x 1,8 m
            Description :
            CNC SIEMENS 828 D
            TURRET VDI 30
            with REITSTOCK
            CHIP CONVOYER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type DMG MORI NLX 2500 / 700


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03786 · CNC Lathe - Inclined Bed Type

          DMG MORI - NLX 2500 / 700 - - 2014 - CELOS

          Technical details
          turning diameter max. 356 mm︱turning length max. 705 mm︱control CELOS ︱greates pass round over bed 920 mm︱ 742 mm︱ 330 mm︱ 4.000 min/-1︱ 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱ 80 mm︱ ( - ) mm︱chucking diameter 250 mm︱ ︱x-travel 260 mm︱z-travel 795 mm︱ 30 / 10 / 30 m/min︱
          CNC - Turning LATHE 2 AXIS DMG MORI - NLX 2500 / 700 WITH TAILSTOC 3JAW CHUCK CHIP CONVOYER
            turning diameter max. 356 mm
            turning length max. 705 mm
            control CELOS
            greates pass round over bed 920 mm
            742 mm
            330 mm
            4.000 min/-1
            18,5 / 15 kW
            spindle nose JIS A-8
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            80 mm
            ( - ) mm
            chucking diameter 250 mm
            x-travel 260 mm
            z-travel 795 mm
            30 / 10 / 30 m/min
            Description :
            CNC - Turning LATHE 2 AXIS
            DMG MORI - NLX 2500 / 700
            WITH TAILSTOC
            3JAW CHUCK
            CHIP CONVOYER




        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type HEMBRUG Mikroturn Twin Spindle


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8239 · CNC Lathe - Inclined Bed Type

          HEMBRUG - Mikroturn Twin Spindle - - 2013 - Siemens 840D

          Technical details
          turning diameter 100 mm︱turning length siehe Datenblatt mm︱control Siemens 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Almost new machine Ultra precision hard lathe for hardened workpieces up to 70 HRC Hydrostatic spindles Direct-drive axles in X and Z !!! Hydrostatic guideways -2 spindle 10.000 rpm 8.000 rpm -Sauter tool turret 6 tools "fixed" / 6 tools driven axial/radial machining with Benz tool systems (engraving, drilling, milling) -Hainbuch clamping system -Schaublin clamping system -jaw chuck -tool measuring system / probe for component measurement -Preparation for automation cell -Chip conveyor -suction system -cooling unit -Fire extinguishing system for applications with oil-KSS Translated with www.DeepL.com/Translator (free version)
            turning diameter 100 mm
            turning length siehe Datenblatt mm
            control Siemens 840D
            Description :
            Almost new machine

            Ultra precision hard lathe
            for hardened workpieces up to 70 HRC

            Hydrostatic spindles
            Direct-drive axles in X and Z !!!
            Hydrostatic guideways

            -2 spindle 10.000 rpm 8.000 rpm
            -Sauter tool turret 6 tools "fixed" / 6 tools driven
            axial/radial machining with Benz tool systems (engraving, drilling, milling)
            -Hainbuch clamping system
            -Schaublin clamping system
            -jaw chuck
            -tool measuring system / probe for component measurement
            -Preparation for automation cell
            -Chip conveyor
            -suction system
            -cooling unit
            -Fire extinguishing system for applications with oil-KSS


            Translated with www.DeepL.com/Translator (free version)


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type WEMAS Turn 210-52


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032983 · CNC Lathe - Inclined Bed Type

          WEMAS - Turn 210-52 - - 2013 - Fanuc Oi-TD

          Technical details
          turning diameter 303 mm︱turning length 334 mm︱control Fanuc Oi-TD ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Fanuc Oi-TD CNC control 12-fold turret head (VDI 30 taper) collet chuck device C-axis driven tools tailstock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328 mm max. Drehdurchmesser / max. turning diameter 303 mm max. Drehlänge / max. turning lenght 334 mm Planweg (x) / cross way (x) 181 mm Längsweg (z) / longitudinal way (z) 390 mm max. Stangendurchmesser / max bar diameter 52 mm Drehzahlbereich / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 30,30 m/min Antriebsleistung Spindel / drive capacity spindle 9/11 kW Gewicht der Maschine ca. / weight 3000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 303 mm
            turning length 334 mm
            control Fanuc Oi-TD
            Description :
            Fanuc Oi-TD CNC control
            12-fold turret head (VDI 30 taper)
            collet chuck device
            C-axis
            driven tools
            tailstock
            coolant device
            chip conveyor

            Technische Daten / technical details:
            max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm
            max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328
            mm
            max. Drehdurchmesser / max. turning diameter 303 mm
            max. Drehlänge / max. turning lenght 334 mm
            Planweg (x) / cross way (x) 181 mm
            Längsweg (z) / longitudinal way (z) 390 mm
            max. Stangendurchmesser / max bar diameter 52 mm
            Drehzahlbereich / spindle speed 4500 UpM /rpm
            Werkzeugrevolver / turret head 12 fach /holes
            Eilgang x,z / rapid feed x,z 30,30 m/min
            Antriebsleistung Spindel / drive capacity spindle 9/11 kW
            Gewicht der Maschine ca. / weight 3000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type CMZ TX 66 QUATRO


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03970 · CNC Lathe - Inclined Bed Type

          CMZ - TX 66 QUATRO - - 2012 - FANUC 31 I TB

          Technical details
          turning diameter 270 mm︱turning length 640 mm︱control FANUC 31 I TB ︱swing diameter over bed slide 270 mm︱spindle turning speed - stepless 4000 U/min︱spindle bore 66 mm︱power capacity 15 kW︱total power requirement 20 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3, x 2.2 x 2 m︱Manual Guide ︱Powered Tooling ︱12 - tool turret ︱C - axis 0.001° ︱part catcher with ejector ︱Chip-conveyor
          NICE MACHINE 6 AXIS WITH SUP SPINDEL 2 TURRET 2 X C AXIS Y AXIS LIVE TOOLS WITH LNS BAR FEEDER AND CONVOYER SOMME LIVE TOOLS
            turning diameter 270 mm
            turning length 640 mm
            control FANUC 31 I TB
            swing diameter over bed slide 270 mm
            spindle turning speed - stepless 4000 U/min
            spindle bore 66 mm
            power capacity 15 kW
            total power requirement 20 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3, x 2.2 x 2 m
            Description :
            NICE MACHINE 6 AXIS
            WITH SUP SPINDEL
            2 TURRET
            2 X C AXIS
            Y AXIS LIVE TOOLS
            WITH LNS BAR FEEDER
            AND CONVOYER
            SOMME LIVE TOOLS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type MAZAK QT Smart 200M


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032921 · CNC Lathe - Inclined Bed Type

          MAZAK - QT Smart 200M - - 2012 - Mazatrol Smart

          Technical details
          turning diameter 350 mm︱turning length 532 mm︱control Mazatrol Smart ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 350 mm
            turning length 532 mm
            control Mazatrol Smart
            Description :
            Mazatrol Smart CNC control
            3-jaw chuck
            C-axis
            driven tools
            12-fold revolver
            Tool Eye
            tail stock
            coolant device
            chip conveyor

            Technische Daten / technical details:
            max. Umlaufdurchmesser / max. swing diameter 660 mm
            max. Drehdurchmesser/ max. turning diameter 350 mm
            max. Drehlänge / max. turning length 532 mm
            Planweg (x) / cross way (x) 225 mm
            Längsweg (z) / longitudinal way (z) 560 mm
            Drehzahlbereich / spindle speed 5000 UpM /rpm
            Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm
            Werkzeugrevolver / turret head 12 fach /holes
            Eilgang X/Z / rapid feed X/Z 30/33 m/min
            Antriebsleistung Spindel / drive capacity spindle 15 kW
            Gewicht der Maschine ca. / weight 4500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type MT CUT T20MC


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032971 · CNC Lathe - Inclined Bed Type

          MT CUT - T20MC - - 2011 - Sinumerik

          Technical details
          turning diameter 196 mm︱turning length 444 mm︱control Sinumerik ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Sinumerik 828D 12-fold revolver driven tools C-axis 3-jaw chuck chip conveyor tail stock coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 470 mm max. Drehdurchmesser / max. turning diameter 196 mm max. Drehlänge / max. turning lenght 444 mm X-Weg / X-travel 161 mm Z-Weg / Z-travel 520 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 30 m/min Eilgang Z / rapid feed Z 30 m/min. Gewicht der Maschine ca. / weight ca. 3950 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 196 mm
            turning length 444 mm
            control Sinumerik
            Description :
            CNC control Sinumerik 828D
            12-fold revolver
            driven tools
            C-axis
            3-jaw chuck
            chip conveyor
            tail stock
            coolant device

            Technische Daten / technical details:
            Umlaufdurchmesser über Bett / rotary diameter over bed 470 mm
            max. Drehdurchmesser / max. turning diameter 196 mm
            max. Drehlänge / max. turning lenght 444 mm
            X-Weg / X-travel 161 mm
            Z-Weg / Z-travel 520 mm
            Drehzahl / spindle speed 4500 UpM /rpm
            Werkzeugrevolver / turret head 12 fach /holes
            Eilgang X / rapid feed X 30 m/min
            Eilgang Z / rapid feed Z 30 m/min.
            Gewicht der Maschine ca. / weight ca. 3950 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type SPINNER TC 600-65MCY


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032996 · CNC Lathe - Inclined Bed Type

          SPINNER - TC 600-65MCY - - 2011 - Sinumerik 840D sl

          Technical details
          turning diameter 400 mm︱turning length 650 mm︱control Sinumerik 840D sl ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Sinumerik 840D sl CNC Steuerung 3 Backenfutter angetriebene Werkzeuge Sinumerik 840D sl CNC control 3-jaw chuck driven tools c-axis Y-axis 16-fold revolver (VDI30) tail stock chip conveyor coolant device Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 400 mm Drehlänge / turning length 650 mm X-Achse / X-axis 275 mm Z-Achse / Z-axis 700 mm Y-Ache / Y-axis +50/ -40 mm Spindelbohrung / spindle hole 65 mm Drehzahl Spindel / spindle speed 4000 UpM / rpm Drehzahl angetr. Werkzeuge / speed of driven tools 5000 UpM / rpm Anzahl der Revolverplätze / numbers of tool places 16 Antriebsleistung Spindel 100/40%ED / drive capacity spindle 100/40%ED 14/18 kW Gewicht ca. / weight ca. 5800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 400 mm
            turning length 650 mm
            control Sinumerik 840D sl
            Description :
            Sinumerik 840D sl CNC Steuerung
            3 Backenfutter
            angetriebene Werkzeuge
            Sinumerik 840D sl CNC control
            3-jaw chuck
            driven tools
            c-axis
            Y-axis
            16-fold revolver (VDI30)
            tail stock
            chip conveyor
            coolant device

            Technische Daten: / technical details
            max. Drehdurchmesser / max. turning diameter 400 mm
            Drehlänge / turning length 650 mm
            X-Achse / X-axis 275 mm
            Z-Achse / Z-axis 700 mm
            Y-Ache / Y-axis +50/ -40 mm
            Spindelbohrung / spindle hole 65 mm
            Drehzahl Spindel / spindle speed 4000 UpM / rpm
            Drehzahl angetr. Werkzeuge / speed of driven tools 5000 UpM / rpm
            Anzahl der Revolverplätze / numbers of tool places 16
            Antriebsleistung Spindel 100/40%ED / drive capacity spindle 100/40%ED 14/18
            kW
            Gewicht ca. / weight ca. 5800 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type LEADWELL T 8 SM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03577 · CNC Lathe - Inclined Bed Type

          LEADWELL - T 8 SM - - 2010 - FANUC 18 ITB

          Technical details
          turning diameter 330 mm︱turning length 500 mm︱control FANUC 18 ITB ︱travel -x axis 160 mm︱ 510 mm︱Spindle Bore: 65 mm︱Number of Turrets: 1 Stück︱no. of tools in turret 1 12 Stück︱ 5000 U/min︱power capacity 11 kW︱spindle nose ASA 8 ︱feed range 1 - 15000 mm/min︱rapid traverse 25 m/min︱
          CNC FANUC 18 ITB Chip convoyer + SUP SPINDEL LIVE TOOLS C AXIS PAR CATCHER TOOL EYES
            turning diameter 330 mm
            turning length 500 mm
            control FANUC 18 ITB
            travel -x axis 160 mm
            510 mm
            Spindle Bore: 65 mm
            Number of Turrets: 1 Stück
            no. of tools in turret 1 12 Stück
            5000 U/min
            power capacity 11 kW
            spindle nose ASA 8
            feed range 1 - 15000 mm/min
            rapid traverse 25 m/min
            Description :
            CNC FANUC 18 ITB
            Chip convoyer + SUP SPINDEL
            LIVE TOOLS C AXIS PAR CATCHER TOOL EYES


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type DOOSAN DAEWOO  PUMA 240 M


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03878 · CNC Lathe - Inclined Bed Type

          DOOSAN DAEWOO - PUMA 240 M - - 2010 - FANUC 21 TB

          Technical details
          turning diameter 510 mm︱turning length 500 mm︱control FANUC 21 TB ︱swing diameter over bed slide 390 mm︱spindle turning speed - stepless 4500 U/min︱spindle bore 65 mm︱power capacity 15 kW︱total power requirement 27 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,7 x 1,6 x 1,7 m︱Powered Tooling ︱12 - tool turret ︱C - axis 0.001° ︱part catcher with ejector ︱3-jaw chuck
          CNC FANUC 21 WITH C AXIS LIVE TOOLS CHUCK TAILSTOK AND CHIP CONVOYER
            turning diameter 510 mm
            turning length 500 mm
            control FANUC 21 TB
            swing diameter over bed slide 390 mm
            spindle turning speed - stepless 4500 U/min
            spindle bore 65 mm
            power capacity 15 kW
            total power requirement 27 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,7 x 1,6 x 1,7 m
            Description :
            CNC FANUC 21
            WITH C AXIS LIVE TOOLS CHUCK TAILSTOK
            AND CHIP CONVOYER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type GILDEMEISTER CTX 310 eco


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04008 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - CTX 310 eco - - 2009 - FANUC, 0i-TC

          Technical details
          turning diameter 200 mm︱turning length 400 mm︱control FANUC, 0i-TC ︱swing diameter 330 mm︱spindle bore 68 mm︱x-travel 160 mm︱z-travel 450 mm︱spindle turning speed range 5000 U/min︱C-axis resolution 0,001 °︱tool turret 1 x 12 Pos︱number of driven tool stations 6 ︱tool taper VDI 30 ︱speed of driven tools 4500 U/min︱total power requirement 16,5 kW︱weight of the machine ca. 3,2 t︱dimensions of machine L x W x H 3,0 x 1,46 x 2,10 m︱
          Accessories: hydr. 3-jaw chuck 200 mmø, chip conveyor, coolant
            turning diameter 200 mm
            turning length 400 mm
            control FANUC, 0i-TC
            swing diameter 330 mm
            spindle bore 68 mm
            x-travel 160 mm
            z-travel 450 mm
            spindle turning speed range 5000 U/min
            C-axis resolution 0,001 °
            tool turret 1 x 12 Pos
            number of driven tool stations 6
            tool taper VDI 30
            speed of driven tools 4500 U/min
            total power requirement 16,5 kW
            weight of the machine ca. 3,2 t
            dimensions of machine L x W x H 3,0 x 1,46 x 2,10 m
            Description :
            Accessories: hydr. 3-jaw chuck 200 mmø, chip conveyor, coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe - Inclined Bed Type GILDEMEISTER CTX 510


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03998 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - CTX 510 - - 2009 - fanuc 32 i

          Technical details
          turning diameter 465 mm︱turning length 1150 mm︱control fanuc 32 i ︱greates pass round over bed 680 mm︱swing diameter over face slide 565 mm︱turning speed range 3500 1/min︱Torque max. 750 Nm︱rapid travel range X 30 / Z 25 m/min︱spindle 42 / 31 kW︱turret head 12 pos. VDI 40 SAUTER︱spindle bore 90 mm︱total power requirement 65 kVA︱weight of the machine ca. 8.1 t︱dimensions of the machine ca. m︱
          NICE MACHINE 2 AXIS FANUC 32 3-jaw-chuck chipconveyor, TAILSTOCK accessories: 12 pcs tools,
            turning diameter 465 mm
            turning length 1150 mm
            control fanuc 32 i
            greates pass round over bed 680 mm
            swing diameter over face slide 565 mm
            turning speed range 3500 1/min
            Torque max. 750 Nm
            rapid travel range X 30 / Z 25 m/min
            spindle 42 / 31 kW
            turret head 12 pos. VDI 40 SAUTER
            spindle bore 90 mm
            total power requirement 65 kVA
            weight of the machine ca. 8.1 t
            Description :
            NICE MACHINE 2 AXIS
            FANUC 32
            3-jaw-chuck
            chipconveyor,
            TAILSTOCK

            accessories: 12 pcs tools,



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          KAMI - HBM - ELMAG - SCHAUBLIN -