,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Bench Lathe

          Machinelist: Bench Lathe


          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column JUNGENTHAL unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3517 · Vertical Turret Lathe - Single Column

          JUNGENTHAL - unbekannt - - unbekannt -

          Technical details
          faceplate diameter 1600 mm︱swing diameter ca. 1800 mm︱turning height ca. 1500 mm︱total power requirement 37 kW︱
            faceplate diameter 1600 mm
            swing diameter ca. 1800 mm
            turning height ca. 1500 mm
            total power requirement 37 kW
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column BERTHIEZ BM 225


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S55000 · Vertical Turret Lathe - Single Column

          BERTHIEZ - BM 225 - - unbekannt -

          Technical details
          faceplate diameter 2250 mm︱swing diameter 4500 mm︱turning height 2000 mm︱turning diameter 3150 mm︱workpiece weight max. 25000 kg︱total power requirement 55 kW︱weight of the machine ca. ca. 32 t︱required space / m︱
            faceplate diameter 2250 mm
            swing diameter 4500 mm
            turning height 2000 mm
            turning diameter 3150 mm
            workpiece weight max. 25000 kg
            total power requirement 55 kW
            weight of the machine ca. ca. 32 t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column HANKOOK VTC 200 E


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8782 · Vertical Turret Lathe - Single Column

          HANKOOK - VTC 200 E - - 2022 - Fanuc 32i-A

          Technical details
          faceplate diameter 2.000 mm︱swing diameter 2.500 mm︱turning height 2.000 mm︱Control Fanuc 32i-A ︱max. Torque 40.403 Nm︱cutting capacity max. 3.000 kgf︱max. workpiece weight 12.000 kg︱table: ︱table diameter 2.000 mm︱table speeds 1,0 - 200 1/min︱power capacity - table 45/55 kW︱C - Axis: ︱resolution 0,001 °︱Working speed 0 - 900 °/min︱max. table speed 2,5 1/min︱turret slide: ︱Shank diameter 32 mm︱spindle cone ISO 7/24 / No.50 ︱Spindlespeed 30 - 3.000 min/-1︱power capacity - Tool Spindle 18,5 / 22 kW︱
          CNC - Vertical Turret Lathe HANKOOK - VTC 200 E - IMMEDIATELY available ex stock DE ! - price delivered, installed Germany / Europe
            faceplate diameter 2.000 mm
            swing diameter 2.500 mm
            turning height 2.000 mm
            Control Fanuc 32i-A
            max. Torque 40.403 Nm
            cutting capacity max. 3.000 kgf
            max. workpiece weight 12.000 kg
            table diameter 2.000 mm
            table speeds 1,0 - 200 1/min
            power capacity - table 45/55 kW
            resolution 0,001 °
            Working speed 0 - 900 °/min
            max. table speed 2,5 1/min
            Shank diameter 32 mm
            spindle cone ISO 7/24 / No.50
            Spindlespeed 30 - 3.000 min/-1
            power capacity - Tool Spindle 18,5 / 22 kW
            Description :
            CNC - Vertical Turret Lathe
            HANKOOK - VTC 200 E

            - IMMEDIATELY available ex stock DE !
            - price delivered, installed Germany / Europe



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column HANKOOK VTB-250E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-3333 · Vertical Turret Lathe - Single Column

          HANKOOK - VTB-250E - - 2021 - Fanuc 32i-B

          Technical details
          faceplate diameter 2.500 mm︱swing diameter 3.000 mm︱turning height max. 2.000 mm︱Control Fanuc 32i-B︱max. torque at faceplate 55100 Nm︱max. cutting force 5.000 kgf︱max. workpiece weight 15.000 kg︱table diameter 2.500 mm︱table speed 1~150 min/-1︱gear steps Auto 2. -step︱spindle cone ISO 7/24 No. 50 ︱tool size 50 mm︱ram cross section 280 x 280 mm︱X-axis travel (sadle horizontal) 1.700 mm︱Z-axis travel (ram vertical) 1.600 mm︱vertical travel of cross rail 1.000 mm︱X-/Z-axis cutting feedrate max. 10.000 mm/min︱X-/Z-axis rapid traverse 10.000 mm/min︱cross rail rapid traverse 300 mm/min︱type of tool holder MAS BT 50
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTB-250E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 12 slots of tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 32i-B - Standard accessories: 4 jaws face plate with 2.500mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark The illustration shows a VTC-250E. However, figures are very similar. VTB has no driven tools and no C-axis.
            faceplate diameter 2.500 mm
            swing diameter 3.000 mm
            turning height max. 2.000 mm
            Control Fanuc 32i-B
            max. torque at faceplate 55100 Nm
            max. cutting force 5.000 kgf
            max. workpiece weight 15.000 kg
            table diameter 2.500 mm
            table speed 1~150 min/-1
            gear steps Auto 2. -step
            spindle cone ISO 7/24 No. 50
            tool size 50 mm
            ram cross section 280 x 280 mm
            X-axis travel (sadle horizontal) 1.700 mm
            Z-axis travel (ram vertical) 1.600 mm
            vertical travel of cross rail 1.000 mm
            X-/Z-axis cutting feedrate max. 10.000 mm/min
            X-/Z-axis rapid traverse 10.000 mm/min
            cross rail rapid traverse 300 mm/min
            type of tool holder MAS BT 50
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTB-250E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 12 slots of tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 32i-B
            - Standard accessories:
            4 jaws face plate with 2.500mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark

            The illustration shows a VTC-250E.
            However, figures are very similar.
            VTB has no driven tools and no C-axis.


        • JS-Werkzeugmaschinen GmbH
        • Weserstrasse 228
        • 32545 Bad Oeynhausen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column HANKOOK VTC-160 E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-2222 · Vertical Turret Lathe - Single Column

          HANKOOK - VTC-160 E - - 2021 - Fanuc 0i-T

          Technical details
          faceplate diameter 1.600 mm︱swing diameter 2.000 mm︱turning height max. 1.400 mm︱Control Fanuc 0i-T︱max. torque at faceplate 23800 Nm︱max. cutting force 3.000 kgf︱max. workpiece weight 10.000 kg︱table diameter 1.600 mm︱table speed 0,7~280 min/-1︱gear steps Auto 2. -step︱min. indx angle 0,001 °︱cutting feedrate 0 ~ 900 °/min︱max. speed 3 min/-1︱spindle cone ISO 7/24 No. 50 ︱tool size 32 x 32 mm︱mill spindel speed (VTC) 30~3.000 min/-1︱max. mill spindle torque (VTC) 235 Nm︱ram cross section 220 x 220 mm︱X-axis travel (sadle horizontal) 1260 mm︱Z-axis travel (ram vertical) 900 mm︱
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTC-160E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 0i-T - Standard accessories: 4 jaws face plate with 1.600mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark
            faceplate diameter 1.600 mm
            swing diameter 2.000 mm
            turning height max. 1.400 mm
            Control Fanuc 0i-T
            max. torque at faceplate 23800 Nm
            max. cutting force 3.000 kgf
            max. workpiece weight 10.000 kg
            table diameter 1.600 mm
            table speed 0,7~280 min/-1
            gear steps Auto 2. -step
            min. indx angle 0,001 °
            cutting feedrate 0 ~ 900 °/min
            max. speed 3 min/-1
            spindle cone ISO 7/24 No. 50
            tool size 32 x 32 mm
            mill spindel speed (VTC) 30~3.000 min/-1
            max. mill spindle torque (VTC) 235 Nm
            ram cross section 220 x 220 mm
            X-axis travel (sadle horizontal) 1260 mm
            Z-axis travel (ram vertical) 900 mm
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTC-160E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 0i-T
            - Standard accessories:
            4 jaws face plate with 1.600mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark


        • JS-Werkzeugmaschinen GmbH
        • Weserstrasse 228
        • 32545 Bad Oeynhausen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column SCHIESS- FRORIEP 14DKE 1250


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03763 · Vertical Turret Lathe - Single Column

          SCHIESS- FRORIEP - 14DKE 1250 - - 2015 - Siemens

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1500 mm︱turning height 1250 mm︱Control Siemens ︱type 840 Dsl ︱tool taper 4 Pos.︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale; it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us.
            faceplate diameter 1250 mm
            swing diameter 1500 mm
            turning height 1250 mm
            Control Siemens
            type 840 Dsl
            tool taper 4 Pos.
            Description :
            The tech. Data are manufacturer or operator information and therefore for us
            not binding. We reserve the right to prior sale; it apply
            only our business
            and conditions of sale.

            About Us
            more than 400 own machines in stock
            over 12000 m² storage area, crane capacity 70 t
            more than 10000 articles accessories for your workshop
            You want to sell machines, production lines or your company,
            Then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column SCHIESS-FRORIEP 14 DKE 1250


          • Brodschrangen 3-5
          • 20457 Hamburg
          • Deutschland

          • +49 (0)40 3003936255
            +49 (0)40 3003936249
          • info@maturus.com
            www.maturus.com
          #2055-Soe5 · Vertical Turret Lathe - Single Column

          SCHIESS-FRORIEP - 14 DKE 1250 - - 2015 - Siemens 840 DSL

          Technical details
          swing diameter 1.500 mm mm︱faceplate diameter 1.250 mm mm︱control Siemens 840 DSL ︱tool taper 4 Stk. ︱turning height 1.250 mm mm︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱
            swing diameter 1.500 mm mm
            faceplate diameter 1.250 mm mm
            control Siemens 840 DSL
            tool taper 4 Stk.
            turning height 1.250 mm mm
            total power requirement / kW
            weight of the machine ca. / t
            dimensions of the machine ca. / m


        • Brodschrangen 3-5
        • 20457 Hamburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column PITTLER PV 1250 / 1-1


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19984 · Vertical Turret Lathe - Single Column

          PITTLER - PV 1250 / 1-1 - - 2009 - Siemens 840D

          Technical details
          faceplate diameter 800 mm︱swing diameter 1400 mm︱turning height mm︱turning diameter 1250 mm︱distance spindle head - tool holder 1850 mm︱control Siemens 840D ︱x-axis -455 / +1555 mm︱z-axis 1000 mm︱c-axis 360000 x 0,001 °︱diameter of spindle flange 380 mm︱spindle turning speed range 800 U/min︱spindle motor 2x 52 kW︱b-axis 0-270 °︱y-axis +/- 115 mm︱work piece power kW︱tool taper Capto C8 ︱worktool spindle axis 8000 U/min︱total power requirement 97 kW︱weight of the machine ca. 29 t︱dimensions of the machine ca. 11,5 x 4,2 x 4,5 m︱
          5-axis vertical CNC turning and milling centre - CNC control Siemens 840D - Chuck diameter 800mm - Chip conveyor - Swivel head with turning, milling spindle (with B and Y axis) - Tool changer 32-fold (Capto C8) - Coolant system - Work area flushing - Tool monitoring - Tools
            faceplate diameter 800 mm
            swing diameter 1400 mm
            turning diameter 1250 mm
            distance spindle head - tool hol. 1850 mm
            control Siemens 840D
            x-axis -455 / +1555 mm
            z-axis 1000 mm
            c-axis 360000 x 0,001 °
            diameter of spindle flange 380 mm
            spindle turning speed range 800 U/min
            spindle motor 2x 52 kW
            b-axis 0-270 °
            y-axis +/- 115 mm
            tool taper Capto C8
            worktool spindle axis 8000 U/min
            total power requirement 97 kW
            weight of the machine ca. 29 t
            dimensions of the machine ca. 11,5 x 4,2 x 4,5 m
            Description :
            5-axis vertical CNC turning and milling centre
            - CNC control Siemens 840D
            - Chuck diameter 800mm
            - Chip conveyor
            - Swivel head with turning, milling spindle (with B and Y axis)
            - Tool changer 32-fold (Capto C8)
            - Coolant system
            - Work area flushing
            - Tool monitoring
            - Tools


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2800 / 250 SM F


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03271 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2800 / 250 SM F - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2800 mm︱turning height 1195 mm︱Control Siemens 840 D ︱turning speeds 224 U/min︱x-travel +-1600 mm︱z-travel 1100 mm︱machine table ︱diameter 2500 mm︱workpiece weight 25000 kg︱power capacity 80 kW︱Torque 35900 Nm︱total power requirement kW︱weight of the machine ca. 66,5 t︱dimensions of the machine ca. m︱faceplate diameter mm︱
          Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2800 mm
            turning height 1195 mm
            Control Siemens 840 D
            turning speeds 224 U/min
            x-travel +-1600 mm
            z-travel 1100 mm
            diameter 2500 mm
            workpiece weight 25000 kg
            power capacity 80 kW
            Torque 35900 Nm
            weight of the machine ca. 66,5 t
            Description :
            Dörries 6, Machine no. V-800293


            - Fixed crossbeam, no tool drive

            Ram
            -Cross section of ram: 250 x 250 mm
            -Travel ram: 1100 mm

            Equipment/accessories:
            -Tool changer revolver 4-times in the ram
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 1600/140 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03270 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 1600/140 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 1600 mm︱turning height 1285 mm︱Control Siemens 840 D ︱turning speeds 400 U/min︱x-travel +- 950 mm︱z-travel 1100 mm︱workpiece weight 9000 kg︱power capacity 80 kW︱Torque 19900 Nm︱table diameter 1400 mm︱weight of the machine ca. 42 t︱dimensions of the machine ca. 7600 x 5200 x 5400 mm︱
          Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 1600 mm
            turning height 1285 mm
            Control Siemens 840 D
            turning speeds 400 U/min
            x-travel +- 950 mm
            z-travel 1100 mm
            workpiece weight 9000 kg
            power capacity 80 kW
            Torque 19900 Nm
            table diameter 1400 mm
            weight of the machine ca. 42 t
            dimensions of the machine ca. 7600 x 5200 x 5400 mm
            Description :
            Dörries 7, Machine number V-800294


            Crossbeam:
            -Cross beam travel: 600 mm

            Ram:
            -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm)
            -Ram travel 1100 mm

            Equipment/accessories:
            -Tool magazine
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400/200 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03276 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400/200 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2445 mm︱Control Siemens 840 D ︱feed range 0-18000 mm/min︱table diameter 2000 mm︱max. table load 17000 kg︱total power requirement 100 kW︱weight of the machine ca. 75 t︱dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm︱
          Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2445 mm
            Control Siemens 840 D
            feed range 0-18000 mm/min
            table diameter 2000 mm
            max. table load 17000 kg
            total power requirement 100 kW
            weight of the machine ca. 75 t
            dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm
            Description :
            Dörries 2, machine number V-800289 with hydraulical chuck, without milling
            function


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Crossbeam support travel: ± 1350 mm

            Ram :
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -No driven tools
            -Tool changer/head changer 72 times
            -Hydraulic chuck
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation




        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column ONSAL SC14


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02276 · Vertical Turret Lathe - Single Column

          ONSAL - SC14 - - 2008 - Sinumerik 840 D

          Technical details
          faceplate diameter 1320 mm︱swing diameter 1400 mm︱turning height 800 mm︱workpiece weight 6000 kg︱cross rail adjustment 800 mm︱Tools changer for 12 tools ︱chip conveyor ︱coolant tank ︱Control Sinumerik 840 D︱transmission ratio 3 ︱daylight table - ram 950 mm︱slide adjustment 750 mm︱total power requirement 60 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 7,5x5,5x4,5 m︱
            faceplate diameter 1320 mm
            swing diameter 1400 mm
            turning height 800 mm
            workpiece weight 6000 kg
            cross rail adjustment 800 mm
            Control Sinumerik 840 D
            transmission ratio 3
            daylight table - ram 950 mm
            slide adjustment 750 mm
            total power requirement 60 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 7,5x5,5x4,5 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400 / 220 MC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03272 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400 / 220 MC - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2145 mm︱Control Siemens 840 D ︱turning speeds 250 U/min︱Speed range - c-axis 0,0025 - 3,15 U/min︱Smallest input increment of the c-axis 1/1000 °︱speed steps of main gearbox 2 ︱x-travel +-1350 mm︱z-travel 1500 mm︱Positioning of the crossbar - grid spacing 100 mm︱ 400 mm/min︱power capacity 100 kW︱machine table ︱Torque 35700 Nm︱diameter 2200 mm︱workpiece weight 17000 kg︱Right crossbar support ︱bit feeder section 250 x 250 mm︱Immersion diameter 340 mm︱x-travel +/- 1350 mm︱
          Dörries 1, Machine no. V-800288 Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Cross beam support travel: ± 1350 mm Ram: -Cross section of ram: 250 x 250 mm (minimum immersion diameter: 380 mm) -Travel ram: 1500 mm Equipment/accessories: -Driven tools -Tool changer/head changer 72 - times -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2145 mm
            Control Siemens 840 D
            turning speeds 250 U/min
            Speed range - c-axis 0,0025 - 3,15 U/min
            Smallest input increment of the . 1/1000 °
            speed steps of main gearbox 2
            x-travel +-1350 mm
            z-travel 1500 mm
            Positioning of the crossbar - gr. 100 mm
            400 mm/min
            power capacity 100 kW
            Torque 35700 Nm
            diameter 2200 mm
            workpiece weight 17000 kg
            bit feeder section 250 x 250 mm
            Immersion diameter 340 mm
            x-travel +/- 1350 mm
            Description :
            Dörries 1, Machine no. V-800288


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Cross beam support travel: ± 1350 mm


            Ram:
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter: 380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -Driven tools
            -Tool changer/head changer 72 - times
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column BERTHIEZ TFM 160


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19770 · Vertical Turret Lathe - Single Column

          BERTHIEZ - TFM 160 - - 2006 reb - NUM 1040

          Technical details
          faceplate diameter 1650 mm︱swing diameter 1880 mm︱turning height 1600 mm︱Control NUM 1040 ︱table load 15 t︱table turning speeds 2- 250 U/min︱main drive motor 37 kW︱ram head dimension 200x200 mm︱ram adjustment 800 mm︱total power requirement 55 kW︱weight of the machine ca. - t︱dimensions of the machine ca. 7,5 x 5,5 x 5,1 m︱
          overhauled 2006 equipped with: - CNC control NUM 1040 CNC & manual control unit - tool changer 12-fold Capto C6 - chip conveyor - paper belt filter system - High pressure cooling 350 bar - Ball screw and measuring scale Heidenhain in X and Z axis
            faceplate diameter 1650 mm
            swing diameter 1880 mm
            turning height 1600 mm
            Control NUM 1040
            table load 15 t
            table turning speeds 2- 250 U/min
            main drive motor 37 kW
            ram head dimension 200x200 mm
            ram adjustment 800 mm
            total power requirement 55 kW
            weight of the machine ca. - t
            dimensions of the machine ca. 7,5 x 5,5 x 5,1 m
            Description :
            overhauled 2006
            equipped with:
            - CNC control NUM 1040 CNC & manual control unit
            - tool changer 12-fold Capto C6
            - chip conveyor
            - paper belt filter system
            - High pressure cooling 350 bar
            - Ball screw and measuring scale Heidenhain in X and Z axis


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column HANKOOK VLC 30/70


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1020041 · Vertical Turret Lathe - Single Column

          HANKOOK - VLC 30/70 - - 2004 - FANUC 18i-TB

          Technical details
          faceplate diameter 3.000 mm︱swing diameter 7.000 mm︱turning height 3.000 mm︱Control FANUC 18i-TB ︱total power requirement 60/75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Hankook Type: VLC 30/70 CNC brand: Fanuc CNC model: 18i-TB Year of make: 2004 CNC controlled Jawplate diameter: 3.000 mm ø Maximum turning diameter : 7.000 mm ø Turning height: 3.000 mm X: 2.225 mm Z: 1.600 mm W: 2.000 mm Incl. Spindle for live tools C axis attachment Tool changer: 24 Maximum table load: 30.000 kg Machine weight: 88.500 kg Including tools as in the photos and turntable extensions for turning diameter of 7000 mm ø This machine was overhauled in 2016 In top condition Max. speed C axis: 0 - 0.5 rpm Motor C axis: 9 kW Feeds X / Z: 0.01 - 500 mm / min RPM table: 1-80 rpm
            faceplate diameter 3.000 mm
            swing diameter 7.000 mm
            turning height 3.000 mm
            Control FANUC 18i-TB
            total power requirement 60/75 kW
            Description :
            Hankook
            Type: VLC 30/70
            CNC brand: Fanuc
            CNC model: 18i-TB
            Year of make: 2004
            CNC controlled
            Jawplate diameter: 3.000 mm ø
            Maximum turning diameter : 7.000 mm ø
            Turning height: 3.000 mm
            X: 2.225 mm
            Z: 1.600 mm
            W: 2.000 mm
            Incl. Spindle for live tools
            C axis attachment
            Tool changer: 24
            Maximum table load: 30.000 kg
            Machine weight: 88.500 kg
            Including tools as in the photos and turntable extensions for turning diameter of 7000 mm ø

            This machine was overhauled in 2016
            In top condition

            Max. speed C axis: 0 - 0.5 rpm
            Motor C axis: 9 kW
            Feeds X / Z: 0.01 - 500 mm / min
            RPM table: 1-80 rpm


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          HBM - KAMI - ELMAG - SCHAUBLIN -