,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center INDEX IT 600


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02959 · CNC Turning- and Milling Center

          INDEX - IT 600 - - 2014 - Fanuc 32i-B

          Technical details
          turning diameter 65 mm︱turning length 150 mm︱control Fanuc 32i-B ︱Number of working hours 11028 h︱chuck diameter 250 mm︱turning speeds 4000 U/min︱turret (x-stations) 14 VDI 30︱Number of axles 3 (X-Y-Z) St.︱turret (x-stations) 7 VDI 30︱Number of axles 2 (X-Z) St.︱c-axis 0,001 °︱y-Axis min./max. +/-75 mm︱chip conveyor Knoll 400 S-1/335 Bj. 2013︱total power requirement 18,5 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 4,7 x 1,72 x 2,16 m︱Handling system FMB Unirobot M-10iA 12-7P Bj. 2017︱driven tools 7 Rev.1 Stationen︱
          CNC universal lathe INDEX IT600, year of manufacture 2014 - The following accessories would be supplied: o 2-jaw chuck Schunk ROTA 2B 200 o approx. 40 sets of clamping jaws o Approx. 45 tool holders (1x driven), but without cutting tool holder/ cutting tool o Compact handling system FMB unirobot M-10iA-12-7P o 12x 7 pallets each for various blanks Option: It would be ideal if the buyer could machine forged blanks for us in the future. We cannot define an article list in advance, but the machine utilisation would be approx. 10% of the annual capacity. Previously used for machine loading with forged blanks in the moulds Angle, cross and T-piece. Can also be used for saw cuts. However, this does not require pallets, grippers and clamping devices are available.
            turning diameter 65 mm
            turning length 150 mm
            control Fanuc 32i-B
            Number of working hours 11028 h
            chuck diameter 250 mm
            turning speeds 4000 U/min
            turret (x-stations) 14 VDI 30
            Number of axles 3 (X-Y-Z) St.
            turret (x-stations) 7 VDI 30
            Number of axles 2 (X-Z) St.
            c-axis 0,001 °
            y-Axis min./max. +/-75 mm
            chip conveyor Knoll 400 S-1/335 Bj. 2013
            total power requirement 18,5 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 4,7 x 1,72 x 2,16 m
            Handling system FMB Unirobot M-10iA 12-7P Bj. 2017
            driven tools 7 Rev.1 Stationen
            Description :
            CNC universal lathe INDEX IT600, year of manufacture 2014

            - The following accessories would be supplied:
            o 2-jaw chuck Schunk ROTA 2B 200
            o approx. 40 sets of clamping jaws
            o Approx. 45 tool holders (1x driven), but without cutting tool holder/
            cutting tool
            o Compact handling system FMB unirobot M-10iA-12-7P
            o 12x 7 pallets each for various blanks

            Option:
            It would be ideal if the buyer could machine forged blanks for us in the future.
            We cannot define an article list in advance, but the machine utilisation would
            be approx. 10% of the annual capacity.

            Previously used for machine loading with forged blanks in the moulds
            Angle, cross and T-piece.
            Can also be used for saw cuts. However, this does not require
            pallets, grippers and clamping devices are available.



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center BENZINGER DoLittle B3


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02910 · CNC Turning- and Milling Center

          BENZINGER - DoLittle B3 - - 2011 - Sinumerik 828 D

          Technical details
          turning diameter 16 mm︱turning length 145 mm︱control Sinumerik 828 D ︱number of spindle speeds 15000 ︱gripping station 16 ︱spindle speed: 15000 ︱load magazine ILS-MUK Breuninger Irco︱high-pressure pump Knoll ︱total power requirement 15 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm︱
          Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011 - Dolittle B3 main and counter spindle with linear tool structure Tool stations: Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop) Counter spindle 11 tools (2 blocks of 5 and 6 tools) Driven tools via the swivelling axis 6 tools There are 10 tool blocks in total. Technical data - Traverse path X1 axis 320mm - Traverse path Z1 axis 145mm - Traverse path Z2 axis 90mm - Traverse path Y-axis 80mm - 2x C-axis - Rapid traverse speeds X/Y/Z 30 m/min - Water-cooled motor spindle 16 mm, 15,000 1/min - BENZINGER linear tool carrier system - Swivelling NC axis with 6 driven tools Accessories: Knoll high-pressure pump Hydra cooling system Suction channel Tool holder, collets 10 tool blocks
            turning diameter 16 mm
            turning length 145 mm
            control Sinumerik 828 D
            number of spindle speeds 15000
            gripping station 16
            spindle speed: 15000
            load magazine ILS-MUK Breuninger Irco
            high-pressure pump Knoll
            total power requirement 15 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm
            Description :
            Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011

            - Dolittle B3 main and counter spindle with linear tool structure

            Tool stations:
            Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop)
            Counter spindle 11 tools (2 blocks of 5 and 6 tools)
            Driven tools via the swivelling axis 6 tools

            There are 10 tool blocks in total.

            Technical data
            - Traverse path X1 axis 320mm
            - Traverse path Z1 axis 145mm
            - Traverse path Z2 axis 90mm
            - Traverse path Y-axis 80mm
            - 2x C-axis
            - Rapid traverse speeds X/Y/Z 30 m/min
            - Water-cooled motor spindle 16 mm, 15,000 1/min
            - BENZINGER linear tool carrier system
            - Swivelling NC axis with 6 driven tools

            Accessories:
            Knoll high-pressure pump
            Hydra cooling system
            Suction channel
            Tool holder, collets
            10 tool blocks



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center Traub TNK 36


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02927 · CNC Turning- and Milling Center

          Traub - TNK 36 - - 2005 - Traub TX 8i

          Technical details
          turning diameter 36 mm︱turning length 100 mm︱control Traub TX 8i ︱turning speeds 6300 U/min︱c-axis 0,001 ︱turret (x-stations) 12 angetrieben︱turning speeds 6000 U/min︱x-axis 370 mm︱z-axis 250 mm︱y-axis +/- 20 mm︱gripping station 36 mm︱turning speeds 6300 U/min︱c-axis 0,001 0︱collet unit 2x Hainbuch HSP/GSP SK 6970 ZW/G︱load magazine FMB turbo 5-42 ︱chip conveyor ja / yes kW︱Number of working hours 28095 h︱length in total 8,3 m︱length in width 2 m︱total power requirement 33 kW︱
          CNC automatic lathe Traub TNK 36, year 2005, with bar feeder FMB turbo 5-42 This turning-milling centre is in a very good condition and equipped with 2x Y- axes and driven tools on 3 tool carriers. Tool carrier 1 = turret 12-fold driven, Y-axis +/-20mm Tool carrier 2 = front attachment 5 stations (4 driven) Tool carrier 3 = rear station 5 stations (4 driven)Y-axis +/-50mm Knoll chip conveyor (hinged belt). Cooling lubricant device with main pump for turret. and 30 bar high pressure pump for front and rear attachment. Resy cooling lubricant cleaning system flow filter approx. 25 micron. FMB bar feeder turbo 5-42 for 3m bar length, plus 15 + 25 + 36mm channels and loading bars. Accessories for TNK 36: for turret 25 fixed tool holders 10 driven tool holders for front+rear: 16 fixed tool holders 6 driven tool holders Clamping devices for HSP/GSP: 50 Hainbuch expansion chucks SK 6970 ZW/G
            turning diameter 36 mm
            turning length 100 mm
            control Traub TX 8i
            turning speeds 6300 U/min
            c-axis 0,001
            turret (x-stations) 12 angetrieben
            turning speeds 6000 U/min
            x-axis 370 mm
            z-axis 250 mm
            y-axis +/- 20 mm
            gripping station 36 mm
            turning speeds 6300 U/min
            c-axis 0,001 0
            collet unit 2x Hainbuch HSP/GSP SK 6970 ZW/G
            load magazine FMB turbo 5-42
            chip conveyor ja / yes kW
            Number of working hours 28095 h
            length in total 8,3 m
            length in width 2 m
            total power requirement 33 kW
            Description :
            CNC automatic lathe Traub TNK 36, year 2005, with bar feeder FMB turbo 5-42
            This turning-milling centre is in a very good condition and equipped with 2x Y-
            axes
            and driven tools on 3 tool carriers.
            Tool carrier 1 = turret 12-fold driven, Y-axis +/-20mm
            Tool carrier 2 = front attachment 5 stations (4 driven)
            Tool carrier 3 = rear station 5 stations (4 driven)Y-axis +/-50mm

            Knoll chip conveyor (hinged belt).
            Cooling lubricant device with main pump for turret.
            and 30 bar high pressure pump for front and rear attachment.
            Resy cooling lubricant cleaning system flow filter approx. 25 micron.
            FMB bar feeder turbo 5-42 for 3m bar length,
            plus 15 + 25 + 36mm channels and loading bars.

            Accessories for TNK 36:

            for turret
            25 fixed tool holders
            10 driven tool holders
            for front+rear:
            16 fixed tool holders
            6 driven tool holders
            Clamping devices for HSP/GSP: 50 Hainbuch expansion chucks SK 6970 ZW/G




        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.