,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled UNITECH UT 560


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3666 · Lathe - cycle-controlled

          UNITECH - UT 560 - - 2014 - Siemens Sinumerik 828 D

          Technical details
          greates pass round over bed 560 mm︱turning length 1500 mm︱control Siemens Sinumerik 828 D ︱swing diameter over slide rest 390 mm︱spindle speed: 2400 Upm︱bed width 345 mm︱spindle bore 80 mm︱diameter of quill 75 mm︱quill stroke 200 mm︱tailstock quill taper MT 5 ︱3-jaw chuck Schunk Rota S 315 ︱3-jaw-chuck diameter 315 mm︱main drive 14 kW︱weight of the machine ca. 2900 kg︱dimensions of the machine ca. m︱
          removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto
            greates pass round over bed 560 mm
            turning length 1500 mm
            control Siemens Sinumerik 828 D
            swing diameter over slide rest 390 mm
            spindle speed: 2400 Upm
            bed width 345 mm
            spindle bore 80 mm
            diameter of quill 75 mm
            quill stroke 200 mm
            tailstock quill taper MT 5
            3-jaw chuck Schunk Rota S 315
            3-jaw-chuck diameter 315 mm
            main drive 14 kW
            weight of the machine ca. 2900 kg
            Description :
            removeable bed bridge

            user interface control: Shopturn

            hydraulical tailstock quill adjustment

            key bar chuck Schunk Rota S+ 2.0 315-92

            quick change tool holder Choromant Capto






        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO Smart turn 8 225


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03977 · Lathe - cycle-controlled

          PINACHO - Smart turn 8 225 - - 2013 - FAGOR TC 8055

          Technical details
          turning diameter 450 mm︱turning length 1500 mm︱control FAGOR TC 8055︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2.29X1 X 1.2 m︱
          TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make the ST-225 an authentic leader in its category.
            turning diameter 450 mm
            turning length 1500 mm
            control FAGOR TC 8055
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2.29X1 X 1.2 m
            Description :
            TEACH IN CNC LATHE
            Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate
            machine up to 450 mm in swing over bed, 1500 mm in distance between centers and
            65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL.
            The available power up to 15 kW in addition to the high rotary speed and low
            vibrations provided by the servomotor and headstock design make the ST-225 an
            authentic leader in its category.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE OPTIMAX 360


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4829 · Lathe - cycle-controlled

          CAZENEUVE - OPTIMAX 360 - - 2013 - SIEMENS

          Technical details
          turning diameter 380 mm︱turning length 700 mm︱control SIEMENS ︱spindle turning speed - stepless 2500 U/min︱tailstock quill taper MT 4 ︱weight 1.5 t︱dimensions of the machine ca. 2000x1400x1820 mmxmmxmm︱
            turning diameter 380 mm
            turning length 700 mm
            control SIEMENS
            spindle turning speed - stepless 2500 U/min
            tailstock quill taper MT 4
            weight 1.5 t
            dimensions of the machine ca. 2000x1400x1820 mmxmmxmm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WAGNER WDE 500


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20401 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2010 - Sinumerik

          Technical details
          centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱
          - Serial-No. G01262 - Control: Sinumerik 802 C
            centre height 250 mm
            centre distance 1500 mm
            turning diameter over bed 500 mm
            turning diameter over slide 280 mm
            turning length 1500 mm
            spindle taper D8
            control Sinumerik
            bed width 390 mm
            spindle bore 82 mm
            turning speed range 45-2000 U/min
            rapid travel - longitudinal/face 8/4 m/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder System Multifix
            drive capacity - spindle motor 6,5 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            coolant 3,0
            voltage 400 V
            total power requirement 24 kVA
            Description :
            - Serial-No. G01262
            - Control: Sinumerik 802 C


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 620E


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032992 · Lathe - cycle-controlled

          SEIGER - SLZ 620E - - 2010 - Sinumerik 840D SL

          Technical details
          turning diameter 660 mm︱centre distance 3000 mm︱control Sinumerik 840D SL ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning length mm︱
          Sinumerik 840D SL control 3-jaw chuck diameter 315mm 4-fold Parat tool holder device steady rest 12mm – 150mm steady rest 120mm – 270mm tail stock chip conveyor coolant device Technische Daten / technical details: Spitzenweite / center to center 3000 mm Umlufdurchmesser über Bett / rotary diameter over bed 660 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm Spindelbohrung / spindle hole 93 mm Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm Eilgang X, Z / rapid feed X, Z 8/10 m/min Reitstockaufnahme / tail stock taper MK6 Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30 kW Gewicht der Maschine ca. / weight ca. 6300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 660 mm
            centre distance 3000 mm
            control Sinumerik 840D SL
            Description :
            Sinumerik 840D SL control
            3-jaw chuck diameter 315mm
            4-fold Parat tool holder device
            steady rest 12mm – 150mm
            steady rest 120mm – 270mm
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 3000 mm
            Umlufdurchmesser über Bett / rotary diameter over bed 660 mm
            Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm
            Spindelbohrung / spindle hole 93 mm
            Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm
            Eilgang X, Z / rapid feed X, Z 8/10 m/min
            Reitstockaufnahme / tail stock taper MK6
            Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30
            kW
            Gewicht der Maschine ca. / weight ca. 6300 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 1200 x 6000


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23228 · Lathe - cycle-controlled

          SEIGER - SLZ 1200 x 6000 - - 2009 - Heidenhain

          Technical details
          turning diameter 1250 mm︱turning length 6000 mm︱control Heidenhain ︱spindle bore 130 mm︱0 5-710 U/min︱transmission ratio 2 ︱workpiece weight 7000 kg︱total power requirement 37/52 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 12x4x2 m︱
          2 Technical data 2.1 Mechanics Working range centre distance: 6000 mm Circulation diameter over bed track: 1250 mm Circulation diameter over facing slide: 850 mm Displacement of the facing slide: 680 mm Bed width: 750 mm Turning tool cross-section (height x width) 40x40 mm Turning spindle Spindle head according to DIN 55027 - size 11 Spindle diameter in front bearing: 190 mm Spindle bore: 130 mm Main drive AC drive power 100% / 60% ED - KW 37 / 52 Max. torque at the spindle approx. 9000 Nm Speed range: 5 - 710 min(-1) Feed drive AC X-feed force 100% ED - 30000 N Z feed force 100% ED - 20000 N X rapid traverse m/min 6 Y rapid traverse m/min 3 Tailstock Quill diameter: 160 mm Quill stroke: 315 mm Quill holder (inner taper) MK 6 Fixed steady rest Clearance (max.) (option): 450 mm Impulse lubrication Flow rate: |/min 0.1 Pump pressure: 30 bar Tank capacity: 2 dm³ Recirculating lubrication Flow rate: |/min 5 Pump pressure: 0.4 bar Tank capacity: 40 dm³
            turning diameter 1250 mm
            turning length 6000 mm
            control Heidenhain
            spindle bore 130 mm
            0 5-710 U/min
            transmission ratio 2
            workpiece weight 7000 kg
            total power requirement 37/52 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 12x4x2 m
            Description :
            2 Technical data
            2.1 Mechanics

            Working range centre distance: 6000 mm
            Circulation diameter over bed track: 1250 mm
            Circulation diameter over facing slide: 850 mm
            Displacement of the facing slide: 680 mm
            Bed width: 750 mm

            Turning tool cross-section (height x width) 40x40 mm

            Turning spindle Spindle head according to DIN 55027 - size 11
            Spindle diameter in front bearing: 190 mm
            Spindle bore: 130 mm

            Main drive AC drive power 100% / 60% ED - KW 37 / 52
            Max. torque at the spindle approx. 9000 Nm
            Speed range: 5 - 710 min(-1)

            Feed drive AC

            X-feed force 100% ED - 30000 N
            Z feed force 100% ED - 20000 N
            X rapid traverse m/min 6
            Y rapid traverse m/min 3

            Tailstock

            Quill diameter: 160 mm
            Quill stroke: 315 mm
            Quill holder (inner taper) MK 6

            Fixed steady rest Clearance (max.) (option): 450 mm

            Impulse lubrication
            Flow rate: |/min 0.1
            Pump pressure: 30 bar
            Tank capacity: 2 dm³

            Recirculating lubrication
            Flow rate: |/min 5
            Pump pressure: 0.4 bar
            Tank capacity: 40 dm³


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VDF BOEHRINGER DUS 630 TI


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03777 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 630 TI - - 2007 - HEINDENHAIN MANUEL PLUS 411

          Technical details
          swing diameter max. 640 mm︱turning length max. 3.000 mm︱control HEINDENHAIN MANUEL PLUS 411︱swing diameter over face slide 435 mm︱radial face slide travel 345 mm︱centre height 280 mm︱bed width 360 mm︱Main spindle: ︱turning speed range - main spindle 3 - 2.500 min/-1︱power capacity - main spindel 19 / 15 kW︱max. Torque 2500 Nm︱transmission ratio 2 ︱spindle nose DIN 55027 / 8 ︱spindle bearing diameter 100 mm︱max. bar capacity 95 mm︱usable bar diameter 80 mm︱chucking diameter 415 mm︱turret: ︱number of toolpositions PARRAT 4 FACH pos.4︱tool taper DIN 69880 / 32 X 25
          Lathe - cycle controled VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007 CNC HEIDENHAIN MANUEL PLUS 411
            swing diameter max. 640 mm
            turning length max. 3.000 mm
            control HEINDENHAIN MANUEL PLUS 411
            swing diameter over face slide 435 mm
            radial face slide travel 345 mm
            centre height 280 mm
            bed width 360 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            power capacity - main spindel 19 / 15 kW
            max. Torque 2500 Nm
            transmission ratio 2
            spindle nose DIN 55027 / 8
            spindle bearing diameter 100 mm
            max. bar capacity 95 mm
            usable bar diameter 80 mm
            chucking diameter 415 mm
            number of toolpositions PARRAT 4 FACH pos.4
            tool taper DIN 69880 / 32 X 25
            Description :
            Lathe - cycle controled
            VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007
            CNC HEIDENHAIN MANUEL PLUS 411


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN-DMT CD 402


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J668 · Lathe - cycle-controlled

          KERN-DMT - CD 402 - - 2007 - SIEMENS 840D SL Shopturn

          Technical details
          control SIEMENS 840D SL Shopturn ︱turning dia. over bed 400 mm︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 230 mm︱spindle bore 64 mm︱bar capacity 52 mm︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2800x1650x1750 mm︱
            control SIEMENS 840D SL Shopturn
            turning dia. over bed 400 mm
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 230 mm
            spindle bore 64 mm
            bar capacity 52 mm
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2800x1650x1750 mm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ800 / 1500


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20957 · Lathe - cycle-controlled

          SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱
          gearbox must be checked!! machine without tailstock! -without tools -without jaws
            turning diameter 800 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 810 Dpl
            workpiece weight flying clamped 750
            workpiece weight with one steady 2200 kg
            swing diameter over face slide 540 mm
            power capacity 20/28 kW
            spindle bore 83 mm
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5x2,8x2 m
            Description :
            gearbox must be checked!!
            machine without tailstock!
            -without tools
            -without jaws


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 70 x 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024038 · Lathe - cycle-controlled

          WEILER - E 70 x 2000 - - 2006 -

          Technical details
          greates pass round over bed 720 mm︱swing over plan sled 430 mm︱centre height 360 mm︱turning length 2.000 mm︱bed width 480 mm︱adjustment of the upper slide 140 mm︱main spindle: ︱turning speeds 1.800 U/min︱Drive power 60/100% ED 37,5 / 30 kW︱spindle bore 106 mm︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. The machine will be available from July 2024. Technical features: - Three-jaw chuck - Ready steel holder - DFX data import - Coolant device ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            greates pass round over bed 720 mm
            swing over plan sled 430 mm
            centre height 360 mm
            turning length 2.000 mm
            bed width 480 mm
            adjustment of the upper slide 140 mm
            turning speeds 1.800 U/min
            Drive power 60/100% ED 37,5 / 30 kW
            spindle bore 106 mm
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            The machine will be available from July 2024.

            Technical features:
            - Three-jaw chuck
            - Ready steel holder
            - DFX data import
            - Coolant device

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB OPTIMAB 450


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03940 · Lathe - cycle-controlled

          SOMAB - OPTIMAB 450 - - 2005 - SOMAB PL + S NUM 1060

          Technical details
          turning diameter 400 mm︱turning length 1100 mm︱control SOMAB PL + S NUM 1060︱turning dia. over face-slide 350 mm︱turning diameter over cross slideways 320 mm︱main drive motor 12 kW︱spindle turning speed range 4500 U/min︱spindle passage 73 mm︱chucking diameter 250 mm︱taper in tailstock MT 4 ︱total power requirement 23 kW︱weight of the machine ca. 5 t︱
          Machine in inclined bed execution with NUM-SOMAB PL+S3 cycle control with 12 POSTES TURRET
            turning diameter 400 mm
            turning length 1100 mm
            control SOMAB PL + S NUM 1060
            turning dia. over face-slide 350 mm
            turning diameter over cross slid. 320 mm
            main drive motor 12 kW
            spindle turning speed range 4500 U/min
            spindle passage 73 mm
            chucking diameter 250 mm
            taper in tailstock MT 4
            total power requirement 23 kW
            weight of the machine ca. 5 t
            Description :
            Machine in inclined bed execution
            with NUM-SOMAB PL+S3 cycle control
            with 12 POSTES TURRET


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN CD 400 M


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4844 · Lathe - cycle-controlled

          KERN - CD 400 M - - 2004 -

          Technical details
          Control: Manufacture Fanuc ︱type Quick Turn mm︱turning dia. over bed 400 mm︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 230 mm︱turning dia. in gap 460 mm︱spindle bore 60 mm︱spindle taper: DIN 55027 / Gr.6 ︱spindle turning speed - stepless 1-3000 U/min︱tailstock quill taper MT 4 ︱diameter of quill 60 mm︱quill stroke 120 mm︱total power requirement 11 kW︱weight of the machine ca. 1.6 t︱dimensions of the machine ca. 275 x 140 x 155 cm x cm x cm︱Quick-change toolholder Multifix B ︱Number of toolholders 6 ︱3-jaw chuck: diameter 200 mm︱Collet chuck F48
            Control: Manufacture Fanuc
            type Quick Turn mm
            turning dia. over bed 400 mm
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 230 mm
            turning dia. in gap 460 mm
            spindle bore 60 mm
            spindle taper: DIN 55027 / Gr.6
            spindle turning speed - stepless 1-3000 U/min
            tailstock quill taper MT 4
            diameter of quill 60 mm
            quill stroke 120 mm
            total power requirement 11 kW
            weight of the machine ca. 1.6 t
            dimensions of the machine ca. 275 x 140 x 155 cm x cm x cm
            Quick-change toolholder Multifix B
            Number of toolholders 6
            3-jaw chuck: diameter 200 mm
            Collet chuck F48


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled POREBA TBA 63 x 2000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17734 · Lathe - cycle-controlled

          POREBA - TBA 63 x 2000 - - 2004 - Fanuc PowerMate

          Technical details
          turning diameter 630 mm︱turning length 2000 mm︱control Fanuc PowerMate ︱turning diameter over slide 370 mm︱current capacity 30 kVA︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 4,0 x 2,0 x 1,9 m︱
          Cycle Controlled Lathe with: CNC control Fanuc PowerMate/QuickTurn - 1 Steady 370mm - 1 steady 160mm - 1 Röhm chuck 400mm - Chip Tray with Coolant Pump - Tool Holder, Accessories
            turning diameter 630 mm
            turning length 2000 mm
            control Fanuc PowerMate
            turning diameter over slide 370 mm
            current capacity 30 kVA
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 4,0 x 2,0 x 1,9 m
            Description :
            Cycle Controlled Lathe with:
            CNC control Fanuc PowerMate/QuickTurn
            - 1 Steady 370mm
            - 1 steady 160mm
            - 1 Röhm chuck 400mm
            - Chip Tray with Coolant Pump
            - Tool Holder, Accessories


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E110


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032976 · Lathe - cycle-controlled

          WEILER - E110 - - 2004 - Weiler D2

          Technical details
          centre distance 4500 mm︱swing diameter max. over bed cover 1100 mm︱swing diameter over face slide 730 mm︱control Weiler D2 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning diameter mm︱turning length mm︱
          Weiler D2 control 3-jaw chuck Röhm diameter 630mm Parat tool holder device Boring trestle steady rest 100-300mm steady rest 300-600mm tail stock chip conveyor coolant device Technische Daten / technical details: Spitzenweite / center to center 4500 mm Umlauf-Ø über Bett / turning Ø over bed 1100 mm Umlauf-Ø über Schlitten / turning Ø over sledge 730 mm Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-1120 UpM /rpm Spindelbohrung / spindle hole 128 mm Eilgang Z /X / rapid feed Z /X 7/3,5 m/min. Reitstockaufnahme / tail stock taper MK6 Antriebsleistung Spindel / drive capacity spindle 45/37 kW Gewicht der Maschine ca. / weight ca. 11500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            centre distance 4500 mm
            swing diameter max. over bed cov. 1100 mm
            swing diameter over face slide 730 mm
            control Weiler D2
            Description :
            Weiler D2 control
            3-jaw chuck Röhm diameter 630mm
            Parat tool holder device
            Boring trestle
            steady rest 100-300mm
            steady rest 300-600mm
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 4500 mm
            Umlauf-Ø über Bett / turning Ø over bed 1100 mm
            Umlauf-Ø über Schlitten / turning Ø over sledge 730 mm
            Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-1120 UpM /rpm
            Spindelbohrung / spindle hole 128 mm
            Eilgang Z /X / rapid feed Z /X 7/3,5 m/min.
            Reitstockaufnahme / tail stock taper MK6
            Antriebsleistung Spindel / drive capacity spindle 45/37 kW
            Gewicht der Maschine ca. / weight ca. 11500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF 320 K


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02894 · Lathe - cycle-controlled

          GILDEMEISTER - NEF 320 K - - 2003 - Siemens

          Technical details
          turning diameter 320 mm︱turning length 750 mm︱control Siemens ︱type 810DL CCUO︱turning diameter over slide rest 150 mm︱cross movement 185 mm︱spindle passage 52 mm︱turning speeds 14-3550 U/min︱transmission ratio 2 ︱quill stroke 120 mm︱rapid traverse 6 m/min︱main drive motor 7 kW︱3-jaw-chuck diameter 200 mm︱total power requirement 10 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,6x1,44x1,44 m︱
          8950 turning hours
            turning diameter 320 mm
            turning length 750 mm
            control Siemens
            type 810DL CCUO
            turning diameter over slide rest 150 mm
            cross movement 185 mm
            spindle passage 52 mm
            turning speeds 14-3550 U/min
            transmission ratio 2
            quill stroke 120 mm
            rapid traverse 6 m/min
            main drive motor 7 kW
            3-jaw-chuck diameter 200 mm
            total power requirement 10 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,6x1,44x1,44 m
            Description :
            8950 turning hours


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 6 x 3000


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-51210 · Lathe - cycle-controlled

          MONFORTS - KNC 6 x 3000 - - 2003 - Monforts EuroTurn

          Technical details
          turning diameter 290 mm︱turning length 3000 mm︱swing dia. 650 mm︱swing diameter over face slide 350 mm︱spindle bore diameter 71 mm︱number of controlled axis 2 ︱control Monforts EuroTurn ︱turning speed range 2- 1800 U/min︱rapid speed 10/5 m/min︱tail stock MK 6 ︱number of tapers in turret head Multifix C ︱bed width 550 mm︱power requirement 21/15 kW︱max. torque on the spindle 3320 Nm︱dimensions m︱weight of the machine ca. 6,5 t︱
          Used Teach in lathe in good condition Zubehör: - 3 jaw chuck - Multifix C with Capto quick change tool - coolant system - steady - chip conveyor - 4 mech. gear steps (2- 225/ 4- 450/ 8- 900/ 16- 1800 rpm) - electric break main motor
            turning diameter 290 mm
            turning length 3000 mm
            swing dia. 650 mm
            swing diameter over face slide 350 mm
            spindle bore diameter 71 mm
            number of controlled axis 2
            control Monforts EuroTurn
            turning speed range 2- 1800 U/min
            rapid speed 10/5 m/min
            tail stock MK 6
            number of tapers in turret head Multifix C
            bed width 550 mm
            power requirement 21/15 kW
            max. torque on the spindle 3320 Nm
            weight of the machine ca. 6,5 t
            Description :
            Used Teach in lathe in good condition

            Zubehör:
            - 3 jaw chuck
            - Multifix C with Capto quick change tool
            - coolant system
            - steady
            - chip conveyor
            - 4 mech. gear steps (2- 225/ 4- 450/ 8- 900/ 16- 1800 rpm)
            - electric break main motor


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled OMG CNA 325 x 1500


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04078 · Lathe - cycle-controlled

          OMG - CNA 325 x 1500 - - 2001 - SIEMENS SINUMERIK 820 D

          Technical details
          turning diameter 640 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 820 D ︱turning diameter over slide 420 mm︱spindle bore 65 mm︱centre height 320 mm︱centre distance 1500 mm︱bed width 440 mm︱spindle drive 17 kW︱max. torque on the spindle max. 162 Nm︱rapid travel - longitudinal/face 10 / 5 m/min︱feed power 10000 / 9500 N︱tailstock quill diameter 100 mm︱tailstock quill stroke 240 mm︱tailstock taper MT 5 ︱total power requirement 25 kW︱weight of the machine ca. 5,5 t︱
          Accessories: 3-jaw chuck 310 mmø, various tool holders for turret, running center, coolant
            turning diameter 640 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 820 D
            turning diameter over slide 420 mm
            spindle bore 65 mm
            centre height 320 mm
            centre distance 1500 mm
            bed width 440 mm
            spindle drive 17 kW
            max. torque on the spindle max. 162 Nm
            rapid travel - longitudinal/face 10 / 5 m/min
            feed power 10000 / 9500 N
            tailstock quill diameter 100 mm
            tailstock quill stroke 240 mm
            tailstock taper MT 5
            total power requirement 25 kW
            weight of the machine ca. 5,5 t
            Description :
            Accessories: 3-jaw chuck 310 mmø, various tool holders for turret,
            running center, coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 1000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04072 · Lathe - cycle-controlled

          MONFORTS - KNC 5 1000 - - 2001 - SYSTEM MTC-K

          Technical details
          turning diameter 500 mm︱turning length 1000 mm︱control MONFORTS CONTROL ︱control SYSTEM MTC-K ︱turning diameter over bed slide 290 mm︱spindle bore 70 mm︱spindle turning speed range 3 - 2800 U/min︱spindle power 15 kW︱max. torque on the spindle 1530 Nm︱spindle head DIN 55027 Gr. 8 ︱feed power X/Z axis 11300 N︱rapid travel - longitudinal/face 10 / 5 m/min︱bed width 360 mm︱travel of cross-slide 265 mm︱upper slide travel 140 mm︱turning tool - shaft cross cut 32 x 25 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 160 mm︱tailstock taper MT 5 ︱total power requirement kW︱
          Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
            turning diameter 500 mm
            turning length 1000 mm
            control MONFORTS CONTROL
            control SYSTEM MTC-K
            turning diameter over bed slide 290 mm
            spindle bore 70 mm
            spindle turning speed range 3 - 2800 U/min
            spindle power 15 kW
            max. torque on the spindle 1530 Nm
            spindle head DIN 55027 Gr. 8
            feed power X/Z axis 11300 N
            rapid travel - longitudinal/face 10 / 5 m/min
            bed width 360 mm
            travel of cross-slide 265 mm
            upper slide travel 140 mm
            turning tool - shaft cross cut 32 x 25 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 160 mm
            tailstock taper MT 5
            Description :
            Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT,
            coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO SM/200


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1116 · Lathe - cycle-controlled

          PINACHO - SM/200 - - 2001 - Fanuc

          Technical details
          turning diameter 420 mm︱turning length 1200 mm︱control Fanuc ︱bore diameter 60 mm︱
            turning diameter 420 mm
            turning length 1200 mm
            control Fanuc
            bore diameter 60 mm
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MAS MT 32 NC


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4932 · Lathe - cycle-controlled

          MAS - MT 32 NC - - 2001 - HEIDENHAIN MANUAL PLUS M

          Technical details
          control HEIDENHAIN MANUAL PLUS M ︱turning diameter over bed 320 mm︱centre height 160 mm︱centre distance 800 mm︱turning dia. over face-slide 150 mm︱spindle bore 50 mm︱spindle taper DIN 55027/B6 ︱spindle turning speed - stepless 0-4000 U/min︱total power requirement 7 kW︱dimensions of the machine ca. 400x160x190 cm︱weight of the machine ca. 2.2 t︱
            control HEIDENHAIN MANUAL PLUS M
            turning diameter over bed 320 mm
            centre height 160 mm
            centre distance 800 mm
            turning dia. over face-slide 150 mm
            spindle bore 50 mm
            spindle taper DIN 55027/B6
            spindle turning speed - stepless 0-4000 U/min
            total power requirement 7 kW
            dimensions of the machine ca. 400x160x190 cm
            weight of the machine ca. 2.2 t


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO Mustang 200


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5197 · Lathe - cycle-controlled

          PINACHO - Mustang 200 - - 2001 - Fagor 8055

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control Fagor 8055 ︱total power requirement 11 kW︱weight of the machine ca. 2,2 t︱dimensions of the machine ca. 3,5 x 2 x 2 m︱
            turning diameter 400 mm
            turning length 1000 mm
            control Fagor 8055
            total power requirement 11 kW
            weight of the machine ca. 2,2 t
            dimensions of the machine ca. 3,5 x 2 x 2 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled FAT TUR 560


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03911 · Lathe - cycle-controlled

          FAT - TUR 560 - - 2000 - Siemens 810D

          Technical details
          turning diameter 560 mm︱turning length 1000 mm︱center height over bed 560 mm︱swing diameter over face slide 300 mm︱spindle bore 105 mm︱spindle speeds: 2 Stufen 2 - 2500 U/min︱tool taper REVOLVER VDI 40 ︱control Siemens 810D ︱total power requirement 18,5 kW︱weight of the machine ca. 4 t︱
          Equipment: swarf protector automatic cooling device RS 232 interface 3-jaw chuck diameter 315mm automatic lubrication system art-Documentation TURRET 8 POSITION VDI 40
            turning diameter 560 mm
            turning length 1000 mm
            center height over bed 560 mm
            swing diameter over face slide 300 mm
            spindle bore 105 mm
            spindle speeds: 2 Stufen 2 - 2500 U/min
            tool taper REVOLVER VDI 40
            control Siemens 810D
            total power requirement 18,5 kW
            weight of the machine ca. 4 t
            Description :
            Equipment:
            swarf protector
            automatic cooling device
            RS 232 interface
            3-jaw chuck diameter 315mm
            automatic lubrication system
            art-Documentation
            TURRET 8 POSITION VDI 40


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled AJAX APOLLO 200


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04070 · Lathe - cycle-controlled

          AJAX - APOLLO 200 - - 2000 - CNC 8055/B-T

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control FAGOR ︱control CNC 8055/B-T ︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 210 mm︱bed width 300 mm︱spindle bore 65 mm︱spindle turning speed range 0 - 3000 U/min︱transmission ratio 2 ︱feeds - longitudinal 0 - 10.000 mm/min︱feeds - cross 0 - 10.000 mm/min︱rapid travel - longitudinal/face 15 m/min︱tailstock quill diameter 68 mm︱tailstock quill stroke 155 mm︱tailstock taper MT 4 ︱total power requirement 8 kW︱weight of the machine ca. t︱dimensions 3,1 x 1,9 x 1,78 m︱
          Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant
            turning diameter 400 mm
            turning length 1000 mm
            control FAGOR
            control CNC 8055/B-T
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 210 mm
            bed width 300 mm
            spindle bore 65 mm
            spindle turning speed range 0 - 3000 U/min
            transmission ratio 2
            feeds - longitudinal 0 - 10.000 mm/min
            feeds - cross 0 - 10.000 mm/min
            rapid travel - longitudinal/face 15 m/min
            tailstock quill diameter 68 mm
            tailstock quill stroke 155 mm
            tailstock taper MT 4
            total power requirement 8 kW
            dimensions 3,1 x 1,9 x 1,78 m
            Description :
            Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts,
            coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE OPTICA 360


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03634 · Lathe - cycle-controlled

          CAZENEUVE - OPTICA 360 - - 2000 - CNC NUM NUM

          Technical details
          turning diameter 380 mm︱turning length 750 mm︱control CNC NUM NUM︱turning dia. over face-slide 200 mm︱turning diameter over cross slideways 280 mm︱main drive motor 11 kW︱spindle turning speed range 2 - 3000 U/min︱spindle passage 54 mm︱chucking diameter 160 mm︱taper in tailstock MT 4 ︱total power requirement 14 kW︱weight of the machine ca. 2 t︱
          NICE MACHINE WITH SIEMENS PANEL FOR CYCLES TURNING
            turning diameter 380 mm
            turning length 750 mm
            control CNC NUM NUM
            turning dia. over face-slide 200 mm
            turning diameter over cross slid. 280 mm
            main drive motor 11 kW
            spindle turning speed range 2 - 3000 U/min
            spindle passage 54 mm
            chucking diameter 160 mm
            taper in tailstock MT 4
            total power requirement 14 kW
            weight of the machine ca. 2 t
            Description :
            NICE MACHINE WITH SIEMENS PANEL FOR CYCLES TURNING


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Cycle controlled Lathe from LagerMaschinen
          Cycle controlled Lathe from LagerMaschinen

          In the world of business and production management the cycle controlled lathe draws from several other instruments. Lathes are used in modern and classical carpentry as well as modern electrical and metal pipe work. As with any machine it's important to seek advice from top consultants when purchasing such an item. LagerMaschinen's wide selection of the the cycle controlled lathe will certainly make your choices easier. Please visit the website today to get started on LagerMaschinen.

          LagerMaschinen provides everything you need.

          LagerMaschinen's wide array of services offers its clients many opportunities. For instance you can have your new-but-used used machine correctly installed and connected - both electrically and within the entire computer network - so you can get back to production and production management. With a cycle controlled lathe from LagerMaschinen you'll also have free access to senders and machine experts and be able to ask advice as well as ensure the quality of your machine. LagerMaschinen's wide network in the machining industry means you'll be able to find the exact machine you need around the corner or at least know when you can 'give it a spin'. The cycle controlled lathe from LagerMaschinen - log on today.

          A used machine gets you where you want to be.

          The cycle controlled lathe from LagerMaschinen will certainly increase your bottom line - whether working in the plastics industry or in metalworks a cycle controlled lathe from LagerMaschinen can raise revenue annually and within the short term. Take advantage of LagerMaschinen's various add-ons such as customized delivery and installation. LagerMaschinen.de's cycle controlled lathe - start looking today.