,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 1500


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04076 · Lathe - cycle-controlled

          MONFORTS - KNC 5 1500 - - 2000 - SYSTEM EURO TURN

          Technical details
          turning diameter 500 mm︱turning length 1500 mm︱control MONFORTS CONTROL ︱control SYSTEM EURO TURN ︱turning diameter over bed slide 290 mm︱spindle bore 70 mm︱spindle turning speed range 3 - 2800 U/min︱spindle power 15 kW︱max. torque on the spindle 1530 Nm︱spindle head DIN 55027 Gr. 8 ︱feed power X/Z axis 11300 N︱rapid travel - longitudinal/face 10 / 5 m/min︱bed width 360 mm︱travel of cross-slide 265 mm︱upper slide travel 140 mm︱turning tool - shaft cross cut 32 x 25 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 160 mm︱tailstock taper MT 5 ︱total power requirement kW︱
          Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
            turning diameter 500 mm
            turning length 1500 mm
            control MONFORTS CONTROL
            control SYSTEM EURO TURN
            turning diameter over bed slide 290 mm
            spindle bore 70 mm
            spindle turning speed range 3 - 2800 U/min
            spindle power 15 kW
            max. torque on the spindle 1530 Nm
            spindle head DIN 55027 Gr. 8
            feed power X/Z axis 11300 N
            rapid travel - longitudinal/face 10 / 5 m/min
            bed width 360 mm
            travel of cross-slide 265 mm
            upper slide travel 140 mm
            turning tool - shaft cross cut 32 x 25 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 160 mm
            tailstock taper MT 5
            Description :
            Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT,
            coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled EMCO E 300-2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-160 · Lathe - cycle-controlled

          EMCO - E 300-2000 - - 2000 - FAGOR 8055

          Technical details
          turning diameter 340 mm︱turning length 2000 mm︱control FAGOR 8055 ︱swing diameter 550 mm︱spindle bore 108 mm︱spindle turning speed - stepless 2500 U/min︱power capacity 16.5 kW︱quill stroke 220 mm︱diameter of quill 100 mm︱total power requirement 19 kW︱weight of the machine ca. 4300 kg︱dimensions of the machine ca. 4300 x 1600 x 1800 m︱
          This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders
            turning diameter 340 mm
            turning length 2000 mm
            control FAGOR 8055
            swing diameter 550 mm
            spindle bore 108 mm
            spindle turning speed - stepless 2500 U/min
            power capacity 16.5 kW
            quill stroke 220 mm
            diameter of quill 100 mm
            total power requirement 19 kW
            weight of the machine ca. 4300 kg
            dimensions of the machine ca. 4300 x 1600 x 1800 m
            Description :
            This EMCO E 300x2000 cycle lathe is supplied complete with all accessories.
            Description:
            - Coolant device
            - 1 piece Luenette open 20-145mm
            - 1 piece closed guide 15-185mm
            - 1 piece face plate
            - 1 piece three-jaw chuck
            - 1 piece wedge bar chuck D=400mm
            - Parat 4-fold tool holder
            - Various tool holders


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VOJUS Turntec 63


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02244 · Lathe - cycle-controlled

          VOJUS - Turntec 63 - - 1999 - SIEMENS 840 D

          Technical details
          turning diameter 630 mm︱turning length 3000 mm︱control SIEMENS 840 D ︱spindle bore 110 mm︱spindle turning speed - stepless 2500 U/min︱rapid travel - longitudinal/face 10/5 m/min︱range L-W-H 3000 x 1800 x 1790 mm︱turning diameter over slide rest 420 mm︱total power requirement 26 kW︱weight of the machine ca. 4,5 t︱
          * CNC-control HEIDENHAIN TURN PLUS * tool holder VDI 40 8 POSITION TURRET * 1 steadies * cooling
            turning diameter 630 mm
            turning length 3000 mm
            control SIEMENS 840 D
            spindle bore 110 mm
            spindle turning speed - stepless 2500 U/min
            rapid travel - longitudinal/face 10/5 m/min
            range L-W-H 3000 x 1800 x 1790 mm
            turning diameter over slide rest 420 mm
            total power requirement 26 kW
            weight of the machine ca. 4,5 t
            Description :
            * CNC-control HEIDENHAIN TURN PLUS
            * tool holder VDI 40 8 POSITION TURRET
            * 1 steadies

            * cooling


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF 520


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-791318 · Lathe - cycle-controlled

          GILDEMEISTER - NEF 520 - - 1999 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 1150 mm︱turning length 1040 mm︱Control ︱total power requirement 12 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱
            turning diameter over bed 500 mm
            turning diameter over slide rest 1150 mm
            turning length 1040 mm
            total power requirement 12 kW
            weight of the machine ca. 3 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E35


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4911 · Lathe - cycle-controlled

          WEILER - E35 - - 1999 - WEILER

          Technical details
          control WEILER ︱turning diameter over bed 410 mm︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 200 mm︱spindle bore 54 mm︱spindle taper ISO 55027/6 ︱spindle turning speed - stepless 4-3000 U/min︱tailstock quill taper MT 4 ︱diameter of quill 65 mm︱quill stroke 120 mm︱feed - longitudinal/cross 0-20 mm/min︱rapid traverse longitudinal and cross 10/5 m/min︱spindle drive 9/13 kW︱dimensions of machine 2300x1200x1800 mm︱weight 2.0 t︱
            control WEILER
            turning diameter over bed 410 mm
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 200 mm
            spindle bore 54 mm
            spindle taper ISO 55027/6
            spindle turning speed - stepless 4-3000 U/min
            tailstock quill taper MT 4
            diameter of quill 65 mm
            quill stroke 120 mm
            feed - longitudinal/cross 0-20 mm/min
            rapid traverse longitudinal and . 10/5 m/min
            spindle drive 9/13 kW
            dimensions of machine 2300x1200x1800 mm
            weight 2.0 t


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GEMINIS CNC 5 Plus 1000/3000


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-20020 · Lathe - cycle-controlled

          GEMINIS - CNC 5 Plus 1000/3000 - - 1999 - Fagor 8050

          Technical details
          turning diameter 1000 mm︱turning length 3000 mm︱control Fagor 8050 ︱turn - diameter over facing slide 680 mm︱workpiece weight 6,5 t︱spindle turning speed range max 1400 U/min︱spindle bore 104 mm︱weight of the machine ca. 9,1 t︱dimensions of the machine ca. 7,7 x 2,7 m︱
          Face plate ø1000mm Face plate ø500mm Three-jaw chuck ø500mm Lynette max ø430mm Speed in 4 steps 0-175 rpm 0-350 rpm 0-700 rpm 0-4500 rpm
            turning diameter 1000 mm
            turning length 3000 mm
            control Fagor 8050
            turn - diameter over facing slid. 680 mm
            workpiece weight 6,5 t
            spindle turning speed range max 1400 U/min
            spindle bore 104 mm
            weight of the machine ca. 9,1 t
            dimensions of the machine ca. 7,7 x 2,7 m
            Description :
            Face plate ø1000mm
            Face plate ø500mm
            Three-jaw chuck ø500mm
            Lynette max ø430mm

            Speed in 4 steps
            0-175 rpm
            0-350 rpm
            0-700 rpm
            0-4500 rpm


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 1000 x 3000


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5271 · Lathe - cycle-controlled

          SEIGER - SLZ 1000 x 3000 - - 1999 - Siemens

          Technical details
          turning diameter 1000 mm︱turning length 3000 mm︱control Siemens ︱total power requirement 46 kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. - m︱
            turning diameter 1000 mm
            turning length 3000 mm
            control Siemens
            total power requirement 46 kW
            weight of the machine ca. 22 t
            dimensions of the machine ca. - m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 - 1000 / SIEMENS


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20337 · Lathe - cycle-controlled

          MONFORTS - KNC 5 - 1000 / SIEMENS - - 1999 - Sinumerik 810 D SIEMENS

          Technical details
          centre height 255 mm︱centre distance 1080 mm︱turning diameter over bed 500 mm︱turning diameter over slide 290 mm︱turning length 1000 mm︱spindle taper KK 8 DIN 55027︱control Sinumerik 810 D SIEMENS︱bed width 360 mm︱spindle bore 70 mm︱turning speed range 2 - 2800 U/min︱rapid travel - longitudinal/face 10 / 5 m/min︱quick change toolholder MULTIFIX Typ B / CAPTO︱drive capacity - spindle motor 11,0 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 80 mm︱quill stroke 160 mm︱coolant ︱voltage 400 V︱total power requirement 16,0 kVA︱weight of the machine ca. 3,0 t︱
          - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp
            centre height 255 mm
            centre distance 1080 mm
            turning diameter over bed 500 mm
            turning diameter over slide 290 mm
            turning length 1000 mm
            spindle taper KK 8 DIN 55027
            control Sinumerik 810 D SIEMENS
            bed width 360 mm
            spindle bore 70 mm
            turning speed range 2 - 2800 U/min
            rapid travel - longitudinal/face 10 / 5 m/min
            quick change toolholder MULTIFIX Typ B / CAPTO
            drive capacity - spindle motor 11,0 kW
            taper in tailstock-quill MK 5
            dia. of quill 80 mm
            quill stroke 160 mm
            voltage 400 V
            total power requirement 16,0 kVA
            weight of the machine ca. 3,0 t
            Description :
            - Serial-No.: 346 / 03
            - control: SIEMENS Sinumerik 810 D
            - quick change tool holder MULTIFIX
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE MAXICA HC 725


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03863 · Lathe - cycle-controlled

          CAZENEUVE - MAXICA HC 725 - - 1998 - SOMAB PL + S5 + -SOMAB

          Technical details
          turning diameter 725 mm︱turning length 4000 mm︱control SOMAB PL + S5 + -SOMAB︱turning dia. over face-slide 670 mm︱turning diameter over cross slideways 390 mm︱main drive motor 16 kW︱spindle turning speed range 2500 U/min︱spindle passage 82 mm︱chucking diameter 315 mm︱taper in tailstock MT 5 ︱total power requirement 30 kW︱weight of the machine ca. 5 t︱
          Machine in WORKING CONDITION with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size WITH SREADY
            turning diameter 725 mm
            turning length 4000 mm
            control SOMAB PL + S5 + -SOMAB
            turning dia. over face-slide 670 mm
            turning diameter over cross slid. 390 mm
            main drive motor 16 kW
            spindle turning speed range 2500 U/min
            spindle passage 82 mm
            chucking diameter 315 mm
            taper in tailstock MT 5
            total power requirement 30 kW
            weight of the machine ca. 5 t
            Description :
            Machine in WORKING CONDITION
            with NUM-SOMAB PL+S cycle control
            with MULTIFIX rapif tool holder size
            WITH SREADY


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 6-2000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03580 · Lathe - cycle-controlled

          MONFORTS - KNC 6-2000 - - 1998 - MTC K

          Technical details
          turning diameter 650 mm︱turning length 2000 mm︱control MTC K ︱turning diameter over slide rest 360 mm︱turning speeds 1800 U/min︱3-jaw chuck 315 mm︱Holder Multifix ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            turning diameter 650 mm
            turning length 2000 mm
            control MTC K
            turning diameter over slide rest 360 mm
            turning speeds 1800 U/min
            3-jaw chuck 315 mm
            Description :
            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E30


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4949 · Lathe - cycle-controlled

          WEILER - E30 - - 1998 -

          Technical details
          Control: Manufacture WEILER ︱turning dia. over bed 330 mm︱centre height 165 mm︱centre distance 770 mm︱turning dia. over face-slide 160 mm︱spindle bore 42 mm︱spindle taper 55027/5 ︱spindle turning speed - stepless 1-4500 U/min︱tailstock quill taper MT 3 ︱dia. of quill 50 mm︱quill stroke 110 mm︱feed - longitudinal/cross 0.001-20 mm/min︱rapid traverse longitudinal 10 m/min︱rapid traverse cross 5 m/min︱spindle drive 9/11 kW︱dimensions of the machine ca. 1800x1200x1700 mmxmmxmm︱weight 1300 kg︱3-jaw-chuck diameter 160 mm︱make FORKKARDT ︱quick change tool holder: MULTIFIX
            Control: Manufacture WEILER
            turning dia. over bed 330 mm
            centre height 165 mm
            centre distance 770 mm
            turning dia. over face-slide 160 mm
            spindle bore 42 mm
            spindle taper 55027/5
            spindle turning speed - stepless 1-4500 U/min
            tailstock quill taper MT 3
            dia. of quill 50 mm
            quill stroke 110 mm
            feed - longitudinal/cross 0.001-20 mm/min
            rapid traverse longitudinal 10 m/min
            rapid traverse cross 5 m/min
            spindle drive 9/11 kW
            dimensions of the machine ca. 1800x1200x1700 mmxmmxmm
            weight 1300 kg
            3-jaw-chuck diameter 160 mm
            make FORKKARDT
            quick change tool holder: MULTIFIX


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 70 /2x2000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15885 · Lathe - cycle-controlled

          WEILER - E 70 /2x2000 - - 1997/2018 - Siemens Sinumerik 805

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control Siemens Sinumerik 805 ︱turning diameter over slide 430 mm︱bed width 480 mm︱engine output 27/22 kW︱spindle head DIN 55027 Gr. 11︱spindle bore 106 mm︱speeds 1 - 1800 U/min︱Power 28 KW︱current capacity 42 kVA︱workpiece weight max. 3800 kg︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 4,0 x 2,0 x 1,9 m︱
          2018 Check of the Main Gear Box and change of parts like Bearing, Gears etc CNC control Siemens Sinumerik 805 - 1 Steady 400mm - 1 chuck 400mm - Coolant Tank
            turning diameter 720 mm
            turning length 2000 mm
            control Siemens Sinumerik 805
            turning diameter over slide 430 mm
            bed width 480 mm
            engine output 27/22 kW
            spindle head DIN 55027 Gr. 11
            spindle bore 106 mm
            speeds 1 - 1800 U/min
            Power 28 KW
            current capacity 42 kVA
            workpiece weight max. 3800 kg
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 4,0 x 2,0 x 1,9 m
            Description :
            2018 Check of the Main Gear Box and change of parts like Bearing, Gears etc
            CNC control Siemens Sinumerik 805
            - 1 Steady 400mm
            - 1 chuck 400mm
            - Coolant Tank


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF PLUS 500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02788 · Lathe - cycle-controlled

          GILDEMEISTER - NEF PLUS 500 - - 1997 - MANUAL PLUS

          Technical details
          control MANUAL PLUS ︱turning diameter 500 mm︱turning diameter over slide 290 mm︱turning length 1500 mm︱cross movement 250 mm︱chucking diameter max. 260 mm︱spindle turning speed - gearbox stage 1 80 - 250 1/min.︱spindle turning speed - gearbox stage 2 20 - 710 1/min.︱spindle turning speed - gearbox stage 3 80 - 2800 1/min.︱spindle motor 11 kW︱ max. 1050 Nm︱spindle head DIN 55027 - Size 8 ︱spindle bore 70 mm︱ Metrisch 80 ︱spindle diameter in front bearing 100 mm︱feeding force longitudinal / facing 10 / 5 Kn︱feed 5 m/min︱rapid travel - longitudinal/face 8 / 6 m/min︱tool holder Multifix C ︱tailstock quill diameter 80 mm︱
          Grundig Manual Plus control
            control MANUAL PLUS
            turning diameter 500 mm
            turning diameter over slide 290 mm
            turning length 1500 mm
            cross movement 250 mm
            chucking diameter max. 260 mm
            spindle turning speed - gearbox . 80 - 250 1/min.
            spindle turning speed - gearbox . 20 - 710 1/min.
            spindle turning speed - gearbox . 80 - 2800 1/min.
            spindle motor 11 kW
            max. 1050 Nm
            spindle head DIN 55027 - Size 8
            spindle bore 70 mm
            Metrisch 80
            spindle diameter in front bearin. 100 mm
            feeding force longitudinal / fac. 10 / 5 Kn
            feed 5 m/min
            rapid travel - longitudinal/face 8 / 6 m/min
            tool holder Multifix C
            tailstock quill diameter 80 mm
            Description :
            Grundig Manual Plus control


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON alfpha 550


          • IproMac e.K.
          • Ennertsweg 38 b
          • 58675 Hemer
          • Deutschland

          • +49 (0) 170 27 32 014
          • w.schneegass@ipromac.de
            www.ipromac.de
          #2075-1012 · Lathe - cycle-controlled

          HARRISON - alfpha 550 - - 1997 - Fanuc

          Technical details
          turning diameter 554 mm︱turning length 1000 mm︱control Fanuc ︱total power requirement 11 kW︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 2,6 x 1,6 x 1,8 m︱
          HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel
            turning diameter 554 mm
            turning length 1000 mm
            control Fanuc
            total power requirement 11 kW
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 2,6 x 1,6 x 1,8 m
            Description :
            HARRISON alpha 550 cycle lathe, used

            Controller: Fanuc
            Turning diameter: 554 mm
            Turning length: 1,000 mm
            Spindle passage: 90 mm
            Spindle:
            Speed (max.): 1,800 rpm
            Speed levels: 9
            Power: 11kW
            Spindle passage (approx.): 90 mm
            Workpiece clamping: 3-jaw chuck, ø315 mm

            Tool carrier:
            Technology: quick-change holder on cross slide
            Travel in X: 310 mm
            Tailstock:
            Technology: Manual tailstock
            Quill ø: 95 mm
            Stroke: 145mm
            Taper: MK 6

            Equipment/accessories:
            Chip management: chip tray
            Coolant management: KSS pump
            Shaft Machining: Fixed Bezel


        • IproMac e.K.
        • Ennertsweg 38 b
        • 58675 Hemer
        • Deutschland

        • 7.900 €
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E70/2


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10002 · Lathe - cycle-controlled

          WEILER - E70/2 - - 1997 - Siemens 805

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control Siemens 805 ︱greates pass round over bed 720 mm︱bed width 480 mm︱spindle diameter in front bearing 150 mm︱spindle bore 106 mm︱swing diameter over face slide 430 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 720 mm
            turning length 2000 mm
            control Siemens 805
            greates pass round over bed 720 mm
            bed width 480 mm
            spindle diameter in front bearin. 150 mm
            spindle bore 106 mm
            swing diameter over face slide 430 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF Plus 710


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-52766 · Lathe - cycle-controlled

          GILDEMEISTER - NEF Plus 710 - - 1996 - Manual Plus 3110 Heidenhain

          Technical details
          turning diameter over bed 710 mm︱turning dia. over face-slide 420 mm︱turning length 2000 mm︱control Manual Plus 3110 Heidenhain︱spindle bore 92 mm︱main spindle speeds: 16 - 1800 U/min︱cross movement 385 mm︱spindle head DIN 55027 - Size 11 ︱spindle diameter in front bearing 140 mm︱power capacity at 100 % load 22,00 kW︱ 2750 Nm︱feed x/z-axis 1 - 5000 mm/min︱rapid traverse X-axis 6,00 m/min︱rapid traverse Z-axis 8,00 m/min︱tailstock quill taper MT 5 ︱quill stroke 210 mm︱diameter of quill 110 mm︱total power requirement 40,00 kW︱weight of the machine ca. 5,60 t︱dimensions of the machine ca. 5,00 x 3,00 x H2,50 m︱
            turning diameter over bed 710 mm
            turning dia. over face-slide 420 mm
            turning length 2000 mm
            control Manual Plus 3110 Heidenhain
            spindle bore 92 mm
            main spindle speeds: 16 - 1800 U/min
            cross movement 385 mm
            spindle head DIN 55027 - Size 11
            spindle diameter in front bearin. 140 mm
            power capacity at 100 % load 22,00 kW
            2750 Nm
            feed x/z-axis 1 - 5000 mm/min
            rapid traverse X-axis 6,00 m/min
            rapid traverse Z-axis 8,00 m/min
            tailstock quill taper MT 5
            quill stroke 210 mm
            diameter of quill 110 mm
            total power requirement 40,00 kW
            weight of the machine ca. 5,60 t
            dimensions of the machine ca. 5,00 x 3,00 x H2,50 m
            Description :



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER     E35


          • INDUBA GmbH
          • Tuttlinger Straße 51
          • 78628 Rottweil
          • Deutschland

          • 0741 21787
            0741 13562
          • info@induba.de
            www.induba.de
          #2002-10020 · Lathe - cycle-controlled

          WEILER - E35 - - 1996 -

          Technical details
          turning diameter mm︱turning length mm︱control


        • INDUBA GmbH
        • Tuttlinger Straße 51
        • 78628 Rottweil
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB UNIMAB 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-695990 · Lathe - cycle-controlled

          SOMAB - UNIMAB 400 - - 1996 - NUM Type 1062 T

          Technical details
          turning diameter 400 mm︱turning length 915 mm︱control NUM Type 1062 T ︱total power requirement 12,5 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱
            turning diameter 400 mm
            turning length 915 mm
            control NUM Type 1062 T
            total power requirement 12,5 kW
            weight of the machine ca. 5500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DUS 560x1500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-106 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560x1500 - - 1996 - SIEMENS 810D

          Technical details
          turning diameter 560 mm︱turning length 1500 mm︱control SIEMENS 810D ︱taper in tailstock-quill MK 5 ︱turning speeds 2500 U/min︱spindle bore 62 mm︱total power requirement 19 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,8 x 1,8 x 1,9 m︱
          This BOEHRINGER DUS 560 is in very good condition
            turning diameter 560 mm
            turning length 1500 mm
            control SIEMENS 810D
            taper in tailstock-quill MK 5
            turning speeds 2500 U/min
            spindle bore 62 mm
            total power requirement 19 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,8 x 1,8 x 1,9 m
            Description :
            This BOEHRINGER DUS 560 is in very good condition


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled COMEV CM 350 x 4000


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7003 · Lathe - cycle-controlled

          COMEV - CM 350 x 4000 - - 1995 - Pico Auto Memory

          Technical details
          turning diameter 700 mm︱turning length 4000 mm︱control Pico Auto Memory ︱centre height 350 mm︱turning diameter over slide 480 mm︱spindle passage 80 mm︱tailstock quill taper MT MK5 ︱turning speeds 1500 U/min︱total power requirement 12,5 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 5,6x1,6x2,25 m︱
          Tailstock MK 5 Quick change steel holder Cycle control Pico Auto Memory steady Röhm 315 wedge bar chuck coolant device various steel holders
            turning diameter 700 mm
            turning length 4000 mm
            control Pico Auto Memory
            centre height 350 mm
            turning diameter over slide 480 mm
            spindle passage 80 mm
            tailstock quill taper MT MK5
            turning speeds 1500 U/min
            total power requirement 12,5 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 5,6x1,6x2,25 m
            Description :
            Tailstock MK 5
            Quick change steel holder
            Cycle control Pico Auto Memory
            steady
            Röhm 315 wedge bar chuck
            coolant device
            various steel holders


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DUS 560 x 1250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18395 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560 x 1250 - - 1995 - Sinumerik 805 Siemens

          Technical details
          turning diameter 570 mm︱turning length 1250 mm︱control Sinumerik 805 Siemens︱clamping length ca 1200 mm︱greates pass round over bed 570 mm︱swing diameter over face slide 365 mm︱turning speed range - main spindle 3 - 2.500 min/-1︱power capacity - main spindel 15 / 19 kW︱spindle bore 62 mm︱spindle head DIN 55027 No. 8︱diameter of quill 80 mm︱taper of center MK 5 ︱quill stroke 190 mm︱total power requirement 40 kVA︱weight of the machine ca. 5,6 t︱
          Lathe cycle controled - SIEMENS Sinumerik 805 / Simeodrive 611 - 4-Jaw Chuck, Handwheel, Covering - Chip Tray & coolant - adjustable feet - approx 20 tool holders 2021 Electrics/controls check by Boehringer
            turning diameter 570 mm
            turning length 1250 mm
            control Sinumerik 805 Siemens
            clamping length ca 1200 mm
            greates pass round over bed 570 mm
            swing diameter over face slide 365 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            power capacity - main spindel 15 / 19 kW
            spindle bore 62 mm
            spindle head DIN 55027 No. 8
            diameter of quill 80 mm
            taper of center MK 5
            quill stroke 190 mm
            total power requirement 40 kVA
            weight of the machine ca. 5,6 t
            Description :
            Lathe cycle controled
            - SIEMENS Sinumerik 805 / Simeodrive 611
            - 4-Jaw Chuck, Handwheel, Covering
            - Chip Tray & coolant
            - adjustable feet
            - approx 20 tool holders
            2021 Electrics/controls check by Boehringer


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BÖHRINGER DUS 560


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06565 · Lathe - cycle-controlled

          BÖHRINGER - DUS 560 - - 1995 -

          Technical details
          serial number 1022 2243-03 ︱centre distance 1500 mm︱ 560mm ︱weight of the machine ca. 3 t︱
            serial number 1022 2243-03
            centre distance 1500 mm
            560mm
            weight of the machine ca. 3 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB TRANSMAB 300


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00209 · Lathe - cycle-controlled

          SOMAB - TRANSMAB 300 - - 1991 - NUM 720 NUM 720

          Technical details
          turning diameter 300 mm︱turning length 500 mm︱control NUM 720 NUM 720︱turning dia. over face-slide 240 mm︱turning diameter over cross slideways 160 mm︱main drive motor 12 kW︱spindle turning speed range 5000 U/min︱spindle passage 52 mm︱chucking diameter 200 mm︱taper in tailstock MT 3 ︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,3 x 1,9 x 1,8 m︱coolant YES
          Machine in inclined bed execution TURRET REVOLVER 8 POSITIONS VDI 20 CNC CONTROL NUM 720 T LOT OFF ACCESSOIRIS
            turning diameter 300 mm
            turning length 500 mm
            control NUM 720 NUM 720
            turning dia. over face-slide 240 mm
            turning diameter over cross slid. 160 mm
            main drive motor 12 kW
            spindle turning speed range 5000 U/min
            spindle passage 52 mm
            chucking diameter 200 mm
            taper in tailstock MT 3
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,3 x 1,9 x 1,8 m
            coolant YES
            Description :
            Machine in inclined bed execution
            TURRET REVOLVER 8 POSITIONS VDI 20
            CNC CONTROL NUM 720 T
            LOT OFF ACCESSOIRIS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB UNIMAB 400


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00208 · Lathe - cycle-controlled

          SOMAB - UNIMAB 400 - - 1990 - SOMAB PL + S NUM-SOMAB

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control SOMAB PL + S NUM-SOMAB︱turning dia. over face-slide 235 mm︱turning diameter over cross slideways 220 mm︱main drive motor 12 kW︱spindle turning speed range 2 - 3000 U/min︱spindle passage 52 mm︱chucking diameter 210 mm︱taper in tailstock MT 4 ︱total power requirement 15 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,3 x 1,9 x 1,8 m︱coolant JA
          Machine in inclined bed execution with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size B
            turning diameter 400 mm
            turning length 1000 mm
            control SOMAB PL + S NUM-SOMAB
            turning dia. over face-slide 235 mm
            turning diameter over cross slid. 220 mm
            main drive motor 12 kW
            spindle turning speed range 2 - 3000 U/min
            spindle passage 52 mm
            chucking diameter 210 mm
            taper in tailstock MT 4
            total power requirement 15 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,3 x 1,9 x 1,8 m
            coolant JA
            Description :
            Machine in inclined bed execution
            with NUM-SOMAB PL+S cycle control
            with MULTIFIX rapif tool holder size B


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •