,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          lathe-conventional-electronic

          Machinelist: lathe-conventional-electronic


          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207347 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - 1x collet chuck including collets (inserts)
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including insert
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207348 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348 * Machinevideo : https://www.youtube.com/watch?v=I6HJZ_d3wIo
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including inserts
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348

            * Machinevideo :
            https://www.youtube.com/watch?v=I6HJZ_d3wIo


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207349 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - 1x collet chuck including collets (inserts)
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including insert
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207350 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350 * Machinevideo : https://www.youtube.com/watch?v=ba6oQf-zdhs
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including inserts
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350

            * Machinevideo :
            https://www.youtube.com/watch?v=ba6oQf-zdhs


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203008 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 45 - 1800 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 3,3 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Revolving steady rest - passage diam. max. 65 mm - coolant device - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - slip clutch - Revolver stop with fine adjustment - Thread clock - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - Operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 45 - 1800 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 3,3 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck DK11-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Revolving steady rest - passage diam. max. 65 mm
            - coolant device
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - slip clutch
            - Revolver stop with fine adjustment
            - Thread clock
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 560-2000 PRO


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203115 · lathe-conventional-electronic

          BERNARDO - TITAN 560-2000 PRO - - -

          Technical details
          turning length 2000 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25 - 1500 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 180 mm︱quill: 5 MK︱spindle bore 105 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 2720 kg.︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Chip back wall - operating tool
            turning length 2000 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25 - 1500 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 180 mm
            quill: 5 MK
            spindle bore 105 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 2720 kg.
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - First filling with Shell Tellus 46
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - slip clutch
            - LED machine light
            - change gears
            - reducing sleeve
            - Chip back wall
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER PRO 360


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203096 · lathe-conventional-electronic

          BERNARDO - MASTER PRO 360 - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52,0 mm︱turning speeds 70 - 2.000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 3 MK︱quill travel 100 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1825 x 750 x 1600 mm︱
          scope of delivery : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            swing diameter over bed slide 220 mm
            turning dia. in gap 502 mm
            spindle bore 52,0 mm
            turning speeds 70 - 2.000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 3 MK
            quill travel 100 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1825 x 750 x 1600 mm
            Description :
            scope of delivery :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 60 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 280 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER 380-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203117 · lathe-conventional-electronic

          BERNARDO - MASTER 380-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 380 mm︱turning dia. in gap 490 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1920 x 800 x 1660 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool Special accessories included in the price: - 3-axis digital display
            turning length 1000 mm
            turning diameter 380 mm
            turning dia. in gap 490 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1920 x 800 x 1660 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 50 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool

            Special accessories included in the price:
            - 3-axis digital display


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 660-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203100 · lathe-conventional-electronic

          BERNARDO - TITAN 660-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 660 mm︱turning dia. in gap 900 mm︱turning diameter over slide 460 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3.300 kg.︱dimensions 4.630 x 1.200 x 1.529 mm︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool
            turning length 3000 mm
            turning diameter 660 mm
            turning dia. in gap 900 mm
            turning diameter over slide 460 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3.300 kg.
            dimensions 4.630 x 1.200 x 1.529 mm
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - slip clutch
            - Rapid traverse lengthways and flat
            - LED machine light
            - 3-jaw steel chuck PO3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - change gears
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO Standard 165 V-D


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203140 · lathe-conventional-electronic

          BERNARDO - Standard 165 V-D - - -

          Technical details
          turning length 1000 mm︱turning diameter 350 mm︱turning dia. in gap 450 mm︱spindle bore 40,0 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4︱taper in tailstock 3 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 529 kg.︱range L-W-H 1730x700x1340 mm︱
          Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool
            turning length 1000 mm
            turning diameter 350 mm
            turning dia. in gap 450 mm
            spindle bore 40,0 mm
            turning speeds 70 - 2000 U/min
            bed width 180 mm
            spindle taper 55029 D 1-4
            taper in tailstock 3 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 529 kg.
            range L-W-H 1730x700x1340 mm
            Description :
            Scope of delivery:
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-160 mm / D4
            - Face plate 200 mm / D4, according to DIN 55029
            - Fixed bezel - passage diam. max. 60 mm
            - Live steady rest - passage diam. max. 60 mm
            - clamping disc 250 mm
            - Quadruple steel holder
            - Shaft fixing device
            - Protective device at steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - coolant device
            - Pull-out chip tray
            - Frequency converter
            - Foot pedal with brake function according to CE
            - bulkhead
            - Thread clock
            - LED machine light
            - Digital speed display
            - reducing sleeve
            - change gears
            - 2 center points
            - underframe
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER 180-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203120 · lathe-conventional-electronic

          BERNARDO - MASTER 180-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱turning dia. in gap 480 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 540 kg.︱range L-W-H 1920 x 750 x 1600 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - underframe - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            turning dia. in gap 480 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 540 kg.
            range L-W-H 1920 x 750 x 1600 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 50 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - underframe
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 800-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203147 · lathe-conventional-electronic

          BERNARDO - TITAN 800-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 800 mm︱turning dia. in gap 1000 mm︱turning diameter over slide 540 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3820 kg.︱dimensions 4800 x 1320 x 1580 mm︱
          Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light - Change gears - Reducing sleeve - chip rear wall - Operating tool
            turning length 3000 mm
            turning diameter 800 mm
            turning dia. in gap 1000 mm
            turning diameter over slide 540 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3820 kg.
            dimensions 4800 x 1320 x 1580 mm
            Description :
            Scope of delivery
            - 3-axis digital display ES-12 V with LCD display
            - Cable routing via energy chain
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disc 500 mm
            - Fixed bezel - Passage diam. 180mm max
            - Revolving bezel - passage diam. 100mm max
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First fill with Shell Tellus 46
            - Rapid traverse longitudinal and face
            - slip clutch
            - Cooling device
            - Quick change steel holder with 4 inserts
            - Protective device for quick-change tool holder
            - LED machine light
            - Change gears
            - Reducing sleeve
            - chip rear wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203099 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Vario Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw steel chuck PO3-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Live steady rest - passage diam. max. 65 mm
            - Foot pedal with brake function according to CE
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - Revolver stop with fine adjustment
            - Frequency converter
            - First filling with Shell Tellus 46
            - coolant device
            - slip clutch
            - Thread clock
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 660 - 2000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203006 · lathe-conventional-electronic

          BERNARDO - TITAN 660 - 2000 - - -

          Technical details
          turning length 2000 mm︱centre height 330 mm︱swing diameter over bed slide 660 mm︱swing diameter over slide rest 460 mm︱turning dia. in gap 900 mm︱spindle bore 105 mm︱turning speeds 25 - 1600 U/min︱bed width 400 mm︱spindle taper 55029 D 1-8︱taper in tailstock 5 MK︱quill travel 235 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2900 kg.︱range L-W-H 3630 x 1200 x 1520 mm︱
          Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool
            turning length 2000 mm
            centre height 330 mm
            swing diameter over bed slide 660 mm
            swing diameter over slide rest 460 mm
            turning dia. in gap 900 mm
            spindle bore 105 mm
            turning speeds 25 - 1600 U/min
            bed width 400 mm
            spindle taper 55029 D 1-8
            taper in tailstock 5 MK
            quill travel 235 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2900 kg.
            range L-W-H 3630 x 1200 x 1520 mm
            Description :
            Scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - Slip clutch
            - Rapid traverse longitudinally and flatly
            - LED machine light
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disk 450 mm
            - Fixed bezel - Passage diam. max. 180 mm
            - Revolving bezel - Passage diam. max. 120mm
            - 2 centering points
            - Motor with magnetic brake according to CE standards
            - Foot pedal with braking function according to CE
            - Initial filling with Shell Tellus 46
            - Coolant device
            - Quick-change tool holder with 4 inserts
            - Protective device for quick-change tool holder
            - Interchangeable wheels
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1500 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203151 · lathe-conventional-electronic

          BERNARDO - SMART 410-1500 Vario Digital - - -

          Technical details
          turning length 1500 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1400 kg.︱range L-W-H 2530 x 1000 x 1450 mm︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool
            turning length 1500 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1400 kg.
            range L-W-H 2530 x 1000 x 1450 mm
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw steel chuck PO3-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Live steady rest - passage diam. max. 65 mm
            - Foot pedal with brake function according to CE
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - Revolver stop with fine adjustment
            - Frequency converter
            - First filling with Shell Tellus 46
            - coolant device
            - slip clutch
            - Thread clock
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 560-1500 PRO


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203010 · lathe-conventional-electronic

          BERNARDO - TITAN 560-1500 PRO - - -

          Technical details
          turning length 1500 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25 - 1600 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 180 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱quill: 5 MK︱weight of the machine ca. 2.370 kg.︱range L-W-H 2.840 x 1.150 x 1.460 mm︱
          Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Chip back wall - operating tool
            turning length 1500 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25 - 1600 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 180 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            quill: 5 MK
            weight of the machine ca. 2.370 kg.
            range L-W-H 2.840 x 1.150 x 1.460 mm
            Description :
            Scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - First filling with Shell Tellus 46
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - slip clutch
            - LED machine light
            - change gears
            - reducing sleeve
            - Chip back wall
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO GOLIATH 660-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203152 · lathe-conventional-electronic

          BERNARDO - GOLIATH 660-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 660 mm︱turning dia. in gap 870 mm︱turning diameter over slide 420 mm︱turning speeds 36 - 1600 U/min︱quill: 5 MK︱quill travel 150 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3990 kg.︱dimensions 4500 x 1280 x 1650 mm︱
          - Versatile applications in general mechanical engineering, production, individual production - The machine bed, cast in one piece, is extremely torsion-resistant and+ low-vibration, which is an essential requirement for accurate turning is fulfilled - Modern main spindle bearing with precision angular contact ball bearings - Central, handy circuit for feeds and threads, with control and pull spindle - Serially with rapid traverse longitudinal and plan to reduce non-productive times - The gears are oversized, hardened and precision ground - The removable bridge allows the machining of workpieces with large diameter - sliding tailstock for taper turning, hand wheel with adjustable Fine scaling (0.02 mm) - Electromechanical foot brake to reduce idle times - Best machining performance even when facing scope of delivery - slip clutch - Rapid traverse longitudinal and face - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 630 mm - Fixed bezel - Passage diam. 250mm max - Revolving bezel - passage diam. 110mm max - 1 center / 1 live center - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - Reducing sleeve - chip rear wall - Operating tool
            turning length 3000 mm
            turning diameter 660 mm
            turning dia. in gap 870 mm
            turning diameter over slide 420 mm
            turning speeds 36 - 1600 U/min
            quill: 5 MK
            quill travel 150 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3990 kg.
            dimensions 4500 x 1280 x 1650 mm
            Description :
            - Versatile applications in general mechanical engineering, production,
            individual production
            - The machine bed, cast in one piece, is extremely torsion-resistant and+
            low-vibration, which is an essential requirement for accurate turning
            is fulfilled
            - Modern main spindle bearing with precision angular contact ball bearings
            - Central, handy circuit for feeds and threads, with control and
            pull spindle
            - Serially with rapid traverse longitudinal and plan to reduce
            non-productive times
            - The gears are oversized, hardened and precision ground
            - The removable bridge allows the machining of workpieces with
            large diameter
            - sliding tailstock for taper turning, hand wheel with adjustable
            Fine scaling (0.02 mm)
            - Electromechanical foot brake to reduce idle times
            - Best machining performance even when facing

            scope of delivery
            - slip clutch
            - Rapid traverse longitudinal and face
            - LED machine light
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disc 630 mm
            - Fixed bezel - Passage diam. 250mm max
            - Revolving bezel - passage diam. 110mm max
            - 1 center / 1 live center
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First fill with Shell Tellus 46
            - Cooling device
            - Quick change steel holder with 4 inserts
            - Protective device for quick-change tool holder
            - Reducing sleeve
            - chip rear wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SOLID 460-1500 DIGI PRO


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203159 · lathe-conventional-electronic

          BERNARDO - SOLID 460-1500 DIGI PRO - - -

          Technical details
          turning length 1500 mm︱turning diameter 460 mm︱swing diameter over bed slide 270 mm︱turning dia. in gap 690 mm︱spindle bore 80,0 mm︱turning speeds 25 - 1700 U/min︱bed width 300 mm︱spindle taper DIN 55029 D 1-8︱taper in tailstock 4 MK︱quill travel 130 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1845 kg.︱range L-W-H 2750 x 1080 x 1600 mm︱
          Description: The Solid 460 Pro universal lathe was specifically designed to be economical Manufacture of individual workpieces and small series with high precision designed. Even the basic equipment includes all the important ones Accessories, which make this machine universally applicable. Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed bezel - Passage diam. max. 150mm - Revolving bezel - Passage diam. max. 110mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Slip clutch - Rapid traverse longitudinally and flatly - Interchangeable wheels - 2 centering points - reducing sleeve - Thread clock - LED machine light - Chip back wall - Operating tool
            turning length 1500 mm
            turning diameter 460 mm
            swing diameter over bed slide 270 mm
            turning dia. in gap 690 mm
            spindle bore 80,0 mm
            turning speeds 25 - 1700 U/min
            bed width 300 mm
            spindle taper DIN 55029 D 1-8
            taper in tailstock 4 MK
            quill travel 130 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1845 kg.
            range L-W-H 2750 x 1080 x 1600 mm
            Description :
            Description:
            The Solid 460 Pro universal lathe was specifically designed to be economical
            Manufacture of individual workpieces and small series with high precision
            designed. Even the basic equipment includes all the important ones
            Accessories, which make this machine universally applicable.

            Scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-250 mm / D8
            - Clamping disk 450 mm
            - Coolant device
            - Initial filling with Shell Tellus 46
            - Fixed bezel - Passage diam. max. 150mm
            - Revolving bezel - Passage diam. max. 110mm
            - Quick-change tool holder with 4 inserts
            - Protective device for quick-change tool holder
            - Motor with magnetic brake according to CE standards
            - Foot pedal with braking function according to CE
            - Slip clutch
            - Rapid traverse longitudinally and flatly
            - Interchangeable wheels
            - 2 centering points
            - reducing sleeve
            - Thread clock
            - LED machine light
            - Chip back wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER 400-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203119 · lathe-conventional-electronic

          BERNARDO - MASTER 400-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 400 mm︱turning dia. in gap 560 mm︱spindle bore 52,0 mm︱turning speeds 45 - 2.000 U/min︱bed width 210 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 100 mm︱total power requirement 2,0 / 2,4 kW︱weight of the machine ca. 810 kg.︱range L-W-H 1.890x800x1.600 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 90 mm - Live steady rest - passage diam. max. 70 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - operating tool
            turning length 1000 mm
            turning diameter 400 mm
            turning dia. in gap 560 mm
            spindle bore 52,0 mm
            turning speeds 45 - 2.000 U/min
            bed width 210 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 100 mm
            total power requirement 2,0 / 2,4 kW
            weight of the machine ca. 810 kg.
            range L-W-H 1.890x800x1.600 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 90 mm
            - Live steady rest - passage diam. max. 70 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 560-1500 PRO VARIO


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203158 · lathe-conventional-electronic

          BERNARDO - TITAN 560-1500 PRO VARIO - - -

          Technical details
          turning length 1500 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25-220/220-1500 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 185 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱quill: 5 MK︱weight of the machine ca. 2420 kg.︱range L-W-H 2840 x 1150 x 1610 mm︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 120mm max - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - First fill with Shell Tellus 46 - Clamping disc 450 mm - 2 center points - Frequency converter - Digital speed display - slip clutch - Rapid traverse longitudinal and face - Cooling device - Quick change steel holder with 4 inserts - Change gears - Reducing sleeve - chip rear wall - Operating tool
            turning length 1500 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25-220/220-1500 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 185 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            quill: 5 MK
            weight of the machine ca. 2420 kg.
            range L-W-H 2840 x 1150 x 1610 mm
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - Fixed bezel - Passage diam. 180mm max
            - Revolving bezel - passage diam. 120mm max
            - Foot pedal with brake function according to CE
            - Protective device for quick-change tool holder
            - LED machine light
            - First fill with Shell Tellus 46
            - Clamping disc 450 mm
            - 2 center points
            - Frequency converter
            - Digital speed display
            - slip clutch
            - Rapid traverse longitudinal and face
            - Cooling device
            - Quick change steel holder with 4 inserts
            - Change gears
            - Reducing sleeve
            - chip rear wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Discover the versatility of a conventional electronic lathe
          The conventional electronic lathe has stood the test of time

          For centuries the lathe has been one of the most functional tools in the shaping of various materials. From clay to metal lathes have stood the test of time in terms of their reliability and practicality. In this day and age a conventional electronic lathe is an extremely versatile tool for both a home workshop and a large factory. Its ability to work on a wide range of materials and its cost-to-production ratio make it a perennial favourite.

          Versatility at your fingertips with an electronic lathe

          A conventional electronic lathe is a smart investment. Whether you're a hobbyist or an industrial professional the benefits of a conventional electronic lathe are clear. Lathes are relatively easy to operate and offer high productivity at a low cost. The advantage of a conventional electronic lathe is that it requires almost no man power and still produces high quality products. If you're in the market for a lathe or any other machining equipment check out LagerMaschinen.

          LagerMaschinen: offering you convenience and cost-efficiency

          In times like these time and money are things that few can afford to waste. If you're looking to save both try shopping for used machinery online. Whether for home or business you'll find a vast array of used machinery at LagerMaschinen. Buying used machinery doesn't mean sacrificing quality because at LagerMaschinen you can find lightly used machines like a conventional electronic lathe at a price you can afford! Make the smart business choice and visit LagerMaschinen.