lathe-conventional-electronic

turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱

---

Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH5-B set

turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱

---

Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762