,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Boring mills - Machining Centers - Drilling machines

          Machinelist: Boring mills / Machining Centers / Drilling machines


          Jig Boring Machine

          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine DECKEL LK


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023166 · Jig Boring Machine

          DECKEL - LK - - unbekannt -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱
          In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 3 identical machines available (see photos). ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 400 mm
            y-travel 250 mm
            Description :
            In our opinion, the machine is in good used condition and can be inspected
            under power by appointment.

            There are 3 identical machines available (see photos).

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as Subject
            to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact

          Machining Center - Horizontal

          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal GROB BZ 530


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023031 · Machining Center - Horizontal

          GROB - BZ 530 - - 2003 - Siemens 840D

          Technical details
          x-travel 630 mm︱y-travel 970 mm︱z-travel 630 mm︱Control Siemens 840D ︱main spindle: ︱Number of boring spindles 2 St.︱turning speed range - main spindle 15000 min/-1︱tool magazin: ︱number of tool places 61 Pos.︱tool taper HSK 63 A ︱max. tool diameter 130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱feeds: ︱weight of the machine ca. 25,0 t︱
          In our opinion, the machines are in good used condition condition and can be inspected under power by appointment. Optionally, an extensive spare parts package can also be purchased, which includes, for example, the following spare parts: - Linear guides - Linear carriage - Camp - Tool changer gripper - Table with 4th axis ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 630 mm
            y-travel 970 mm
            z-travel 630 mm
            Control Siemens 840D
            Number of boring spindles 2 St.
            turning speed range - main spind. 15000 min/-1
            number of tool places 61 Pos.
            tool taper HSK 63 A
            max. tool diameter 130 mm
            max. tool length 300 mm
            max. tool weight 8 kg
            weight of the machine ca. 25,0 t
            Description :
            In our opinion, the machines are in good used condition
            condition and can be inspected under power by appointment.

            Optionally, an extensive spare parts package can also be purchased, which
            includes, for example, the following spare parts:
            - Linear guides
            - Linear carriage
            - Camp
            - Tool changer gripper
            - Table with 4th axis

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact

          Machining Center - Universal

          used Boring mills / Machining Centers / Drilling machines Machining Center - Universal MIKRON HSM 400 U


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202236 · Machining Center - Universal

          MIKRON - HSM 400 U - - 2004 - Heidenhain iTNC 530

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱z-travel 350 mm︱Control Heidenhain iTNC 530 ︱main spindle: ︱max. turning speeds 42.000 min/-1︱drive capacity - main spindle 10 / 13 kW︱max. torque 4,25 Nm︱rotary table: ︱table diameter 156 mm︱max. table load 25 kg︱tool changer: ︱number of tool places 30 Pos.︱tool taper HSK 40 ︱max. tool diameter 80 mm︱max. tool length 210 mm︱max. tool weight 1,5 kg︱change-time chip to chip 8 sec︱change-time tool to tool 5 sec︱rotating range 360 °︱
          In our opinion, the machine is in very good condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 400 mm
            y-travel 250 mm
            z-travel 350 mm
            Control Heidenhain iTNC 530
            max. turning speeds 42.000 min/-1
            drive capacity - main spindle 10 / 13 kW
            max. torque 4,25 Nm
            table diameter 156 mm
            max. table load 25 kg
            number of tool places 30 Pos.
            tool taper HSK 40
            max. tool diameter 80 mm
            max. tool length 210 mm
            max. tool weight 1,5 kg
            change-time chip to chip 8 sec
            change-time tool to tool 5 sec
            rotating range 360 °
            Description :
            In our opinion, the machine is in very good condition
            and can be inspected under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Universal GROB BZ500


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023257 · Machining Center - Universal

          GROB - BZ500 - - 1999 - Siemens 840 D

          Technical details
          x-travel 630 mm︱y-travel 630 mm︱z-travel 500 mm︱Control Siemens 840 D ︱tool taper HSK 63 A ︱weight of the machine ca. 15,0 t︱
          In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Five-axis - Single spindle design/horizontal There are 9 identical machines available. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 630 mm
            y-travel 630 mm
            z-travel 500 mm
            Control Siemens 840 D
            tool taper HSK 63 A
            weight of the machine ca. 15,0 t
            Description :
            In our opinion, the machines are in good used condition
            Condition and can be viewed under power by appointment.

            Technical features:
            - Five-axis
            - Single spindle design/horizontal

            There are 9 identical machines available.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Universal SW-SCHWäBISCHE WERKZEUGMASCH. BA 400-2


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024014 · Machining Center - Universal

          SW-SCHWäBISCHE WERKZEUGMASCH. - BA 400-2 - - 1999 - Siemens 840C

          Technical details
          x-travel 400 mm︱y-travel 450 mm︱z-travel 400 mm︱control Siemens 840C ︱main spindle: ︱number of spindles 2 Stück︱turning speed range - main spindle 50 - 12.500 min/-1︱torque 2 x 80 Nm︱drive capacity - main spindle 2 x 23,5 kW︱tool changer: ︱number of tool places 2 x 30 Pos.︱tool taper HSK 63 A ︱max. tool diameter 75 mm︱max. tool length 275 mm︱max. tool weight 10 kg︱change-time chip to chip ca. 4,5 sec︱feeds: ︱feed speeds 1 - 40.000 mm/min︱total power requirement 68 kW︱weight of the machine ca. 13,8 t︱
          In our opinion, the machine is in very good condition used Condition and can be viewed under power by appointment. There are 5 identical machines available ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 400 mm
            y-travel 450 mm
            z-travel 400 mm
            control Siemens 840C
            number of spindles 2 Stück
            turning speed range - main spind. 50 - 12.500 min/-1
            torque 2 x 80 Nm
            drive capacity - main spindle 2 x 23,5 kW
            number of tool places 2 x 30 Pos.
            tool taper HSK 63 A
            max. tool diameter 75 mm
            max. tool length 275 mm
            max. tool weight 10 kg
            change-time chip to chip ca. 4,5 sec
            feed speeds 1 - 40.000 mm/min
            total power requirement 68 kW
            weight of the machine ca. 13,8 t
            Description :
            In our opinion, the machine is in very good condition
            used
            Condition and can be viewed under power by appointment.

            There are 5 identical machines available

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine HYUNDAI WIA KBN-135


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024019 · Table Type Boring and Milling Machine

          HYUNDAI - WIA KBN-135 - - 2011 - Fanuc 31i Model A

          Technical details
          x-travel 3.000 mm︱y-travel 2.000 mm︱z-travel 1.600 mm︱control Fanuc 31i Model A ︱main spindle: ︱w-axis 700 mm︱turning speeds 2.000 U/min︱spindle drive 22 kW︱spindle diameter 135 mm︱tool changer: ︱tool taper SK 50 ︱number of tool places 60 Pos.︱max. tool diameter 125 mm︱max. tool length 600 mm︱max. tool weight 20 kg︱change-time tool to tool 30 sec︱change-time chip to chip 70 sec︱work table: ︱table surface area 2.000 x 1.800 mm︱max. table load 10.000 kg︱
          In our opinion, the machine is in very good condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 3.000 mm
            y-travel 2.000 mm
            z-travel 1.600 mm
            control Fanuc 31i Model A
            w-axis 700 mm
            turning speeds 2.000 U/min
            spindle drive 22 kW
            spindle diameter 135 mm
            tool taper SK 50
            number of tool places 60 Pos.
            max. tool diameter 125 mm
            max. tool length 600 mm
            max. tool weight 20 kg
            change-time tool to tool 30 sec
            change-time chip to chip 70 sec
            table surface area 2.000 x 1.800 mm
            max. table load 10.000 kg
            Description :
            In our opinion, the machine is in very good condition and can be viewed under
            power
            by appointment.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***



        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A machining centre adds versatility to your business
          Machining Centre: a versatile tool for your metalworking needs

          Machining centres are multi-functional tools in the maching of solid materials usually metals. They are distinguished from other forms of cutting by the fact that the machining centre itself moves as opposed to the work piece. Machining centres also known as milling machines come in a variety of sizes from small models for home workspaces to large industrial models for factories. Find your next used machining centre at LagerMaschinen your source for quality used equipment.

          Enhance your business' efficiency with a machining centre

          The term 'machining centre' can be further subdivided into specific types of centres namely horizontal and vertical based on the orientation of the spindle. A vertical machining centre is usually best suited projects where intricacy and precision are required while horizontal machining centres offer operators a higher rate of production and output. Whether you're shopping as a hobbyist or a business owner you can find the right used machining centre for you from wide selection available at LagerMaschinen.

          Experiences the advantages of shopping at LagerMaschinen

          Buying used machinery online is a practical solution to time and budgetary concerns. When you browse LagerMaschinen's easy-to-use site you'll quickly see the many advantages to shopping for used equipment online. You can search from the comfort of your home or office sort your results by price location or model and best of all the wide selection of products available guarantees you'll find the perfect machining centre for your home or business. Save time and money at LagerMaschinen.


          Boring mills / machining centres / boring machines
          Find the best boring machines for your needs

          The term 'boring machines' includes a wide range of equipment used to create holes in a variety of different materials. Boring machines can come in large range of sizes as well. Small boring machines are perfect for wood workers or home hobbyists, while larger equipment is suited to industrial settings. Lathes, machining centres and boring mills all fall under the umbrella of boring machines. For the best selection of used boring machines, check out the best online machinery marketplace, LagerMaschinen.

          Which type of used machines is right for you?

          Boring mills and machining centres are amongst the most popular boring machines. They can be subdivided into two main categories based on the orientation of the boring bar. Boring mills and machining centres are known for their precision cutting techniques and are perennial industry favourites. Purchasing boring mills or machining centres doesn't have to cost your business a fortune. By investing in used machines online, you can get the quality you demand without breaking your budget.

          LagerMaschinen: the easiest way to find used machines online

          In today's economy, time and money are two of the most valuable assets we have. Making the most of both is advantageous for both businesses and individuals. If you're in the market for industrial machinery or even small-scale equipment for your home workshop or factory, why not consider investing in used machines. Shopping for used machines online at LagerMaschinen takes the hassle out of the browsing process. Find boring machines presses and drills quickly and easily using LagerMaschinen.