,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Bevel Gear Testing Machine

          Machinelist: Bevel Gear Testing Machine


          Bevel Gear Testing Machine

          used Gear cutting machines Bevel Gear Testing Machine OERLIKON T50


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18006 · Bevel Gear Testing Machine

          OERLIKON - T50 - - 2001 -

          Technical details
          max. wheel diameter 400/500 mm︱CNC-Control GE FANUC Series 160i-M ︱pinion diameter - max. 400 mm︱crown gear diamter max. 500 mm︱x-axis +/- 70 mm︱y-axis 200 mm︱z-axis 200 mm︱axis angle 90 Grad︱speeds: R 0 - 3000 / T 0 - 5000 1/min︱rated current 30 kVA︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,5 x 2,3 m︱
          The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks
            max. wheel diameter 400/500 mm
            CNC-Control GE FANUC Series 160i-M
            pinion diameter - max. 400 mm
            crown gear diamter max. 500 mm
            x-axis +/- 70 mm
            y-axis 200 mm
            z-axis 200 mm
            axis angle 90 Grad
            speeds: R 0 - 3000 / T 0 - 5000 1/min
            rated current 30 kVA
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,2 x 2,5 x 2,3 m
            Description :
            The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic
            hard and soft testing of spiral and hypoid bevel gears with an axle angle
            of 90°
            Bevel gear analysis ROTEC T50 GA2
            Color unit company Binks


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Testing Machine GLEASON 513


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-385316 · Bevel Gear Testing Machine

          GLEASON - 513 - - 1975 -

          Technical details
          max. wheel diameter 400 mm︱gear width 0 mm︱module ︱pinion diameter - max. 254 mm︱axial cross angle 90 °︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            max. wheel diameter 400 mm
            pinion diameter - max. 254 mm
            axial cross angle 90 °
            total power requirement 15 kW
            Description :
            G L E A S O N (USA)
            Hypoid Spiral Bevel Gear Running Testing Machine
            Model 513 TESTER, Year 1975, Serial No. 721607

            This machine is very suitable for precision production testing of spiral and
            hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and
            the pinion spindle is horizontal.
            The pinion cone distance can be adjusted while the machine is working in
            order to find the optimal mounting position whereby the gear is "loaded"
            with a preset torque.
            The axial pinion position can be adjusted until the quietest meshing position
            of the traction flank is found. Likewise, the thrust flank can be tested
            during the return run.
            Marking compound is sprayed on both sides of the teeth so the flank contact
            pattern can be seen. Working cycles, as well as the positioning in the
            tooth gap, are automatic. The gear quality can be assessed by recording the
            harmonic frequencies, which are displayed on a separate monitor and which
            can be analyzed with a RHF Control. Machine can be used for soft testing of
            production parts, as well as for mating sets of hardened gears and pinions
            prior to lapping, and for final testing after lapping to select the optimum
            pinion mounting distance. Also ideal for lab work, processing, and quality
            control.

            Max. gear outside diameter, approx. 508 mm
            Max. pinion outside diameter, approx. 254 mm
            Axial cross angle 90 °
            Offset of pinion spindle above/below gear spindle, max. 102 mm
            Diameter of taper hole, pinion spindle 99/95 mm
            Diameter of taper hole, gear spindle 56/55 mm
            Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm
            Speeds of gear spindle, infinitely variable 0 - 1,250 rpm

            Spindle drive, approx. 5 / 7.5 kW
            Total electrical load, approx. 15 kW - 380 V - 50 Hz

            Accessories / Special Features
            * Large display for 1 / 2 / 3 harmonies, display for pinion distance,
            pinion speed, as well of gear torque in kg/torque, etc.
            * Hydraulic workpiece clamping. * Hydraulic slide clamping.
            * Tank for marking compound with mixer and pump, separate.
            * Separate switch cabinet. * Separate hydraulic unit.
            * Lots of spare parts, spare motors, etc.

            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear cutting machines Gear Hobbing Machine - Vertical KOHCHIYAMA TECH SH-55


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20171 · Gear Hobbing Machine - Vertical

          KOHCHIYAMA TECH - SH-55 - - 2014 - FANUC 31i MODEL B

          Technical details
          max. wheel diameter 5500 mm︱gear width 1500 mm︱max. module 32 ︱faceplate diameter 3740 mm︱swing diameter 6200 mm︱turning height 1200 mm︱control FANUC 31i MODEL B1250 mm︱cross rail - adjustment 3000 mm︱turning speeds 3-15 U/min︱spindle turning speed - stepless 15 - 1500 U/min︱workpiece weight 39,4 t︱max. dia. of teeth cutting 5500 mm︱tooth width 550 mm︱module 32 ︱cutter speeds 10 -150 U/min︱milling cutter dia. x width 450 x 110 mm︱milling head axial adjustable 2060 mm︱total power requirement - kW︱weight of the machine ca. - t︱
          Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor
            max. wheel diameter 5500 mm
            gear width 1500 mm
            max. module 32
            faceplate diameter 3740 mm
            swing diameter 6200 mm
            turning height 1200 mm
            control FANUC 31i MODEL B
            1250 mm
            cross rail - adjustment 3000 mm
            turning speeds 3-15 U/min
            spindle turning speed - stepless 15 - 1500 U/min
            workpiece weight 39,4 t
            max. dia. of teeth cutting 5500 mm
            tooth width 550 mm
            module 32
            cutter speeds 10 -150 U/min
            milling cutter dia. x width 450 x 110 mm
            milling head axial adjustable 2060 mm
            total power requirement - kW
            weight of the machine ca. - t
            Description :
            Complex TurnMill & Gear Cutting Machine

            - CNC control FANUC 31i B
            - Turning and Milling Function
            - ATC
            - Angular Milling Head
            - Gear Hobbing (internal and external)
            - Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical LIEBHERR LC 3000 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20040 · Gear Hobbing Machine - Vertical

          LIEBHERR - LC 3000 CNC - - 2009 - Siemens 840D

          Technical details
          max. wheel diameter 3000 mm︱gear width 500 mm︱max. module 25 / 40 ︱spindle turning speed range 250 U/min︱feed speeds max. 4000 mm/min︱faceplate diameter 2000 mm︱table bore diameter 700 mm︱table turning speeds 51 U/min︱power capacity - milling spindle 53 kW︱drive motor for milling spindle - kW︱axial adjustment 1200 mm︱milling head swivable ca. +/- 45 °︱control Siemens 840D ︱total power requirement - kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. - m︱
          - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head 2 machines available
            max. wheel diameter 3000 mm
            gear width 500 mm
            max. module 25 / 40
            spindle turning speed range 250 U/min
            feed speeds max. 4000 mm/min
            faceplate diameter 2000 mm
            table bore diameter 700 mm
            table turning speeds 51 U/min
            power capacity - milling spindle 53 kW
            drive motor for milling spindle - kW
            axial adjustment 1200 mm
            milling head swivable ca. +/- 45 °
            control Siemens 840D
            total power requirement - kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. - m
            Description :
            - CNC Control Siemens 840D
            - Internal Hob Head IFK
            - External Hob Head

            2 machines available


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23258 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 ︱min. module 1 ︱Control Siemens 840 D ︱table load 15 t︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5x4x3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program "Milling in single-part process" - Switching the machine (dry/wet) - Counterholder tip - travelling - - Magnetic roller - Clamping upper part - complete - Clamping device - complete - Special chip separator - Special chip separator - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software Free travelling counterholder - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1,200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task Smallest/largest distance between milling cutter and workpiece axis... 100 / 750 mm Largest axial slide path... 1,000 mm (special design) Largest clampable hob cutter - Ø 450 mm Length... 500 mm Swivelling range of the milling head... + 30/- 45º Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter movement... 450 mm Table diameter... 1,200 mm Table bore - Ø 300 mm Depth... 875 mm Maximum table load approx... 15,000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1,200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm, - Milling head swivelling angle... +A/-A-30/15 degrees, - Hydraulic unit, made by Parker,
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36
            min. module 1
            Control Siemens 840 D
            table load 15 t
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5x4x3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjusting wedges
            - Dialogue program "Milling in single-part process"
            - Switching the machine (dry/wet)
            - Counterholder tip - travelling -
            - Magnetic roller
            - Clamping upper part - complete
            - Clamping device - complete - Special chip separator
            - Special chip separator
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software Free travelling counterholder
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1,200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task

            Smallest/largest distance between milling cutter and workpiece axis... 100 /
            750 mm
            Largest axial slide path... 1,000 mm (special design)

            Largest clampable hob cutter - Ø 450 mm
            Length... 500 mm

            Swivelling range of the milling head... + 30/- 45º
            Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063)

            Largest milling cutter movement... 450 mm
            Table diameter... 1,200 mm

            Table bore - Ø 300 mm
            Depth... 875 mm
            Maximum table load approx... 15,000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1,200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm,
            - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm,
            - Milling head swivelling angle... +A/-A-30/15 degrees,
            - Hydraulic unit, made by Parker,


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23256 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D PowerLine

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 Modul︱min. module 1 ︱Control Siemens 840 D PowerLine︱table diameter 1200 mm︱table load 15 t︱total power requirement kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5 x 4 x 3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjustable wedges - Dialogue program "Milling in single-part process" - Magnetic roller - Special chip separator - Counterholder sleeve - Holder for oscillating pressure bell - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software for free movement of counterholder - Measuring device for P1200 - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1.200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task. - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm - Largest axial slide path... 1.000 mm (special design) - Largest clampable hob cutter - Ø... 450 mm - Length... 500 mm - Swivelling range of the milling head... .+ 30/- 45º - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063) - Largest milling cutter movement... 450 mm - Table diameter . . . . . . . .. .1.200 mm - Table bore - Ø... 300 mm - Depth... 875 mm - Maximum table load approx... 15.000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1.200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm, - Milling head swivelling angle +A/-A: 30/15 degrees, - Hydraulic unit, Parker, - filter, Indusa, type DL2500N Jet, Year of manufacture 2015, max. air capacity 2.500 m³/hour.
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36 Modul
            min. module 1
            Control Siemens 840 D PowerLine
            table diameter 1200 mm
            table load 15 t
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5 x 4 x 3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - Power clamping device
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjustable wedges
            - Dialogue program "Milling in single-part process"
            - Magnetic roller
            - Special chip separator
            - Counterholder sleeve
            - Holder for oscillating pressure bell
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software for free movement of counterholder
            - Measuring device for P1200
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1.200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task.

            - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm
            - Largest axial slide path... 1.000 mm (special design)
            - Largest clampable hob cutter - Ø... 450 mm
            - Length... 500 mm
            - Swivelling range of the milling head... .+ 30/- 45º
            - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063)
            - Largest milling cutter movement... 450 mm
            - Table diameter . . . . . . . .. .1.200 mm
            - Table bore - Ø... 300 mm
            - Depth... 875 mm
            - Maximum table load approx... 15.000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1.200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm,
            - Milling head swivelling angle +A/-A: 30/15 degrees,
            - Hydraulic unit, Parker,
            - filter, Indusa, type DL2500N Jet,
            Year of manufacture 2015, max. air capacity 2.500 m³/hour.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03264 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Simens 840 D PL

          Technical details
          max. wheel diameter 1200 mm︱gear width ca. 800 mm︱max. module 25/35 ︱Control Simens 840 D PL ︱workpiece diameter 1200 mm︱Hobbing approx. 25 mm︱tooth form milling approx. 35 mm︱axial slide travel 1000 mm︱table diameter 1200 mm︱table bore diameter 300 mm︱table load 15000 kg︱total power requirement 110 kW︱weight of the machine ca. 24,5 t︱dimensions of the machine ca. 8,1 x 6,2 x 3,8 m︱
          Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program “Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation
            max. wheel diameter 1200 mm
            gear width ca. 800 mm
            max. module 25/35
            Control Simens 840 D PL
            workpiece diameter 1200 mm
            Hobbing approx. 25 mm
            tooth form milling approx. 35 mm
            axial slide travel 1000 mm
            table diameter 1200 mm
            table bore diameter 300 mm
            table load 15000 kg
            total power requirement 110 kW
            weight of the machine ca. 24,5 t
            dimensions of the machine ca. 8,1 x 6,2 x 3,8 m
            Description :
            Equipment/Accessoires:
            - Motor milling head M3 special speed series
            - Colum - increased 1. 000 mm
            - Clamping device
            - Dialogue program “Milling in single-indexing process”
            - Telephone diagnostic system
            - swivelable counter bearing holder
            - measuring device
            - machine with counter steady
            - documentation



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P2000/2400


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03266 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P2000/2400 - - 2008 - Sinumerik 840 D

          Technical details
          max. wheel diameter 2400 mm︱gear width 600 mm︱max. module 30 ︱Control Sinumerik 840 D ︱workpiece external diameter max. 3400 ︱rim strength max. 500 ︱radial slide travel 1050 mm︱axial slide travel 1600 mm︱swivelling range milling head +- 15 °︱table diameter 1870 mm︱table hole ︱diameter 600 mm︱depth 875 mm︱table load capacity - central/maximum 30000 kg︱workpiece ︱tip circle diameter 440 mm︱root circle dia. min. 310 mm︱cutter width - max. 120 mm︱total power requirement 100 kW︱weight of the machine ca. 37,5 t︱
          machine can be used only for internal gears - dry cutting type Equipment/accessories: - column increased - internal head IKF2 - big clamping table - documentation
            max. wheel diameter 2400 mm
            gear width 600 mm
            max. module 30
            Control Sinumerik 840 D
            workpiece external diameter max. 3400
            rim strength max. 500
            radial slide travel 1050 mm
            axial slide travel 1600 mm
            swivelling range milling head +- 15 °
            table diameter 1870 mm
            diameter 600 mm
            depth 875 mm
            table load capacity - central/ma. 30000 kg
            tip circle diameter 440 mm
            root circle dia. min. 310 mm
            cutter width - max. 120 mm
            total power requirement 100 kW
            weight of the machine ca. 37,5 t
            Description :
            machine can be used only for internal gears - dry cutting type

            Equipment/accessories:
            - column increased
            - internal head IKF2
            - big clamping table
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON PFAUTER P 2800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06195 · Gear Hobbing Machine - Vertical

          GLEASON PFAUTER - P 2800 - - 2007 - Siemens 840 D

          Technical details
          max. wheel diameter 2800 mm︱gear width - mm︱max. module 20/30 ︱min. module ︱Control Siemens 840 D ︱total power requirement 40 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 7 x 4,5 x 4,75 m︱
          The machine has only a few working hours and is like new. - The price of the new machine of this caliber is €2.35 million - With minimal operating hours, the machine is essentially new. - It is one of Gleason's largest machines - It has the possibility of dry or wet milling; and internal and external gearing. - The machine underwent a comprehensive manufacturer's inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our production facility, and you are welcome. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter displacement path: 300 mm SIEMENS path control SINUMERIK 840 D with 5 axes and 1 spindle (basic configuration) as well as electronic gear (EG) and integrated safety functions. MOTOR MILLING HEADS - for INTERNAL gears: I1 Millable nominal module in steel with a strength of around 600 N/mm2 approx. 25mm+ Cutter speed range 25 - 150 min-1 Min./Max. Wheelbase 280/1,820 mm Min. workpiece inner diameter approx. 1,000 mm ++ Max. workpiece ring thickness 240mm ++) Max. workpiece width 470mm ++) - EXTERNAL gears M2 -with the smallest external Ø 950 mm -with the largest external Ø 2800 mm ADDITIONAL DATA Table load capacity max.: 40.000 kg Total power requirement: 40 kW Weight of the machine: approx. 50 t Dimensions of the machine: 7 x 4,5 x 4,75 m
            max. wheel diameter 2800 mm
            gear width - mm
            max. module 20/30
            Control Siemens 840 D
            total power requirement 40 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 7 x 4,5 x 4,75 m
            Description :
            The machine has only a few working hours and is like new.

            - The price of the new machine of this caliber is €2.35 million
            - With minimal operating hours, the machine is essentially new.
            - It is one of Gleason's largest machines
            - It has the possibility of dry or wet milling; and internal and external
            gearing.
            - The machine underwent a comprehensive manufacturer's inspection in July
            2023 and is in impeccable working order.
            - Machine is currently partially assembled to allow potential buyers to
            verify all functionalities. If you wish to see the machine in operation, we
            have two identical machines running in our production facility, and you are
            welcome.


            CNC control Siemens 840 D
            Nominal workpiece diameter: 2800 mm
            Table diameter: 2500 mm
            Pitch wheel diameter: 2,200 mm
            Table bore diameter: 800 mm
            Table bore depth: 875 mm
            Machine nominal module
            Hobbing aprrox. 20 mm gear
            Milling approx.: 30 mm
            Smallest/largest distance between milling cutter and workpiece axis: 600/1,735
            mm
            Largest axial slide path – special design: 1,000 mm
            Largest champable hob diameter: 350 mm
            Largest champable hob length: 375 mm
            Swivel range of the milling head: + 30/- 45o
            cutter arbor cone: HSK-B160 (hollow shank taper according to DIN 69063)
            Largest milling cutter displacement path: 300 mm
            SIEMENS path control SINUMERIK 840 D with 5 axes and 1 spindle (basic
            configuration) as well
            as electronic gear (EG) and integrated safety functions.
            MOTOR MILLING HEADS
            - for INTERNAL gears: I1
            Millable nominal module in steel with a strength of around 600 N/mm2 approx.
            25mm+
            Cutter speed range 25 - 150 min-1
            Min./Max. Wheelbase 280/1,820 mm
            Min. workpiece inner diameter approx. 1,000 mm ++
            Max. workpiece ring thickness 240mm ++)
            Max. workpiece width 470mm ++)
            - EXTERNAL gears M2
            -with the smallest external Ø 950 mm
            -with the largest external Ø 2800 mm
            ADDITIONAL DATA
            Table load capacity max.: 40.000 kg
            Total power requirement: 40 kW
            Weight of the machine: approx. 50 t
            Dimensions of the machine: 7 x 4,5 x 4,75 m



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P 630


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24054 · Gear Hobbing Machine - Vertical

          PFAUTER - P 630 - - 2000 -

          Technical details
          max. wheel diameter 630 mm︱gear width 410 mm︱max. module 8 ︱min. module 1 ︱milling spindle speeds (infinitely variable) 62 - 390 U/min︱max. milling cutter diameter 192 mm︱cutter length max. 258 mm︱table diameter 550 mm︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 3,7 x 2,5 x 2,1 m︱
          Chip conveyor, change gears, arbors, toolings.
            max. wheel diameter 630 mm
            gear width 410 mm
            max. module 8
            min. module 1
            milling spindle speeds (infinite. 62 - 390 U/min
            max. milling cutter diameter 192 mm
            cutter length max. 258 mm
            table diameter 550 mm
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 3,7 x 2,5 x 2,1 m
            Description :
            Chip conveyor, change gears, arbors, toolings.



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical HURTH-MODUL WF 315 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23238 · Gear Hobbing Machine - Vertical

          HURTH-MODUL - WF 315 S - - 1998 - 840C Siemens

          Technical details
          Workpiece dimensions 360 mm︱max. workpiece diameter 360 mm︱module 8 mm︱x-travel 400 mm︱y-travel 240 mm︱z-travel 360 mm︱milling head -swivable +/- 45 °︱diameter of hob max. 175 mm︱milling spindle turning speed range: 75-600 U/min.︱ 40 KVA︱control 840C Siemens︱dimensions of the machine ca. 3,10 x 2,40 x 2,70 m︱weight 9 t︱total power requirement 25 kW︱work piece revolutions zweigänig 0,2-60 U/min︱counter-stay slide 450 mm Verfahrweg︱
          Siemens Sinumerik 880 M - control partial gearbox double threaded, automatic workpiece feeding, conversational programm Video link: https://www.youtube.com/watch?v=GkQs8lfeNYk
            Workpiece dimensions 360 mm
            max. workpiece diameter 360 mm
            module 8 mm
            x-travel 400 mm
            y-travel 240 mm
            z-travel 360 mm
            milling head -swivable +/- 45 °
            diameter of hob max. 175 mm
            milling spindle turning speed ra. 75-600 U/min.
            40 KVA
            control 840C Siemens
            dimensions of the machine ca. 3,10 x 2,40 x 2,70 m
            weight 9 t
            total power requirement 25 kW
            work piece revolutions zweigänig 0,2-60 U/min
            counter-stay slide 450 mm Verfahrweg
            Description :
            Siemens Sinumerik 880 M - control
            partial gearbox double threaded, automatic workpiece feeding, conversational
            programm
            Video link:
            https://www.youtube.com/watch?v=GkQs8lfeNYk


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER PE 1200/1600


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24153 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - PE 1200/1600 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 1600 mm︱gear width 700 mm︱max. module 25 ︱min. module 2 ︱x-axis 875 mm︱z-axis 1000 mm︱control Siemens 840 C︱weight 38 t︱milling arbors HSK-B160 ︱table load 15 to t︱arbor support 900 verfahrbar︱total power requirement 100 kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 7,9 x 7,4 x 4,0 m︱
          Sonderfräskopf M2 - Max Fräserdurchmesser 350 mm - Max Fräserlänge 375 mm - Max Fräserverschiebung 300 mm
            max. wheel diameter 1600 mm
            gear width 700 mm
            max. module 25
            min. module 2
            x-axis 875 mm
            z-axis 1000 mm
            control Siemens 840 C
            weight 38 t
            milling arbors HSK-B160
            table load 15 to t
            arbor support 900 verfahrbar
            total power requirement 100 kW
            weight of the machine ca. 27 t
            dimensions of the machine ca. 7,9 x 7,4 x 4,0 m
            Description :
            Sonderfräskopf M2
            - Max Fräserdurchmesser 350 mm
            - Max Fräserlänge 375 mm
            - Max Fräserverschiebung 300 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical LIEBHERR LC 82


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-685908 · Gear Hobbing Machine - Vertical

          LIEBHERR - LC 82 - - 1995 - SIEMENS 840 C

          Technical details
          max. wheel diameter 80 mm︱gear width 120 mm︱max. module 3 ︱min. module 1 ︱control SIEMENS 840 C ︱total power requirement 30 kW︱weight of the machine ca. 7500 t︱dimensions of the machine ca. m︱
          L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            max. wheel diameter 80 mm
            gear width 120 mm
            max. module 3
            min. module 1
            control SIEMENS 840 C
            total power requirement 30 kW
            weight of the machine ca. 7500 t
            Description :
            L I E B H E R R
            CNC – Controlled Gear Hobbing Machine
            Type LC 82
            Baujahr 1995 Ser.-Nr. 0836
            ______________________________________________________

            Gear-Diam. max. 80 mm
            Module Range 1 - 3
            Helix Angle +/- 45 °

            Distance Table Center to Tool Center 15 – 160 mm
            Hobbing Head Slide stroke vertical 250 mm
            Tangential Travel / Shift Travel of Tool slide 180 mm
            Minimum Number of Teeth 3 (!)
            Hob Size max. Ø x length approx. 90 - 200 mm
            Taper of Hob spindle HSK 50 A

            Workpiece Clamping length (table/Tailstock) 250 mm
            Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev.
            Hob speed steplessly adjustable 0 – 800 rpm

            Hob Spindle Drive 8 kW -
            Total Load approx. 30 kW - 400 V – 50 Hz
            Total weight of Machine approx. 7.500 kg

            Special attachments / accessories:

            • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/
            swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a
            surface especially designed for the gear manufacturing with error display
            function.
            • Automatic and contactless tooth meshing device to adjust the hob into
            workpiece.
            • Automatic Shifting of hob slide.
            • Automatic Workpiece handling system Model SSL for high speed loading and
            unloading of Workpieces, consisting of a steel chain3,, for workpiece
            carriers and 3-fold WP-Gripper for blanks,
            for the machining position and for unloading of finished parts onto the
            steel band.
            Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix
            gear sprocket.
            Clamping of workpiece between centers by a mechanical, cam controlled quill
            in tailstock.
            • complete workarea protection with one sliding door, chip conveyor, small
            coolant device, oil dust
            Absorber, WP Carrier, etc.
            The Machine can be also used for dry cutting.

            Condition : Satisfactory to Good . Machine can be inspected under power here
            in stock.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER PE 150 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19792 · Gear Hobbing Machine - Vertical

          PFAUTER - PE 150 CNC - - 1991/2013 - Fanuc 15M

          Technical details
          max. workpiece diameter 150 mm︱gear width 150 mm︱max. module 3 / 4 ︱min. module -- ︱distance cutter centre - clamping area 10 - 160 mm︱milling slide swivelling -/+ 45 Grad︱table diameter 160 mm︱table bore diameter 63 mm︱diameter of milling arbor 32 mm︱milling spindle turning speeds 150 - 660 U/min︱feed range 1 - 1500 mm/min︱feed range 0,001 - 40 mm/WU︱milling cutter dia. x width 130 x 220 mm︱milling spindle - taper SK 40 ︱dist. cutter spindle - workpiece spindle 10 - 160 mm︱shifting 170 mm︱table rotation speed 1 - 80 U/min︱rapid speed 3000 mm/min︱Control Fanuc 15M ︱total power requirement 50 kVA︱
          2013 retrofitted & equipped with: - CNC control Fanuc 15 M CNC (6 axes controlled), - loading magazine - chip conveyor - counterholder
            max. workpiece diameter 150 mm
            gear width 150 mm
            max. module 3 / 4
            min. module --
            distance cutter centre - clampin. 10 - 160 mm
            milling slide swivelling -/+ 45 Grad
            table diameter 160 mm
            table bore diameter 63 mm
            diameter of milling arbor 32 mm
            milling spindle turning speeds 150 - 660 U/min
            feed range 1 - 1500 mm/min
            feed range 0,001 - 40 mm/WU
            milling cutter dia. x width 130 x 220 mm
            milling spindle - taper SK 40
            dist. cutter spindle - workpiece. 10 - 160 mm
            shifting 170 mm
            table rotation speed 1 - 80 U/min
            rapid speed 3000 mm/min
            Control Fanuc 15M
            total power requirement 50 kVA
            Description :
            2013 retrofitted & equipped with:
            - CNC control Fanuc 15 M CNC (6 axes controlled),
            - loading magazine
            - chip conveyor
            - counterholder




        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON-PFAUTER P 2001/3001 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-12370 · Gear Hobbing Machine - Vertical

          GLEASON-PFAUTER - P 2001/3001 CNC - - 1991/2006 rebuilt - Siemens Sinumerik 3M

          Technical details
          max. wheel diameter 3000 mm︱gear width 1200 mm︱max. module 30/40 ︱min. module 2 ︱table diameter 2500 mm︱table load capacity 400 kN︱hob dia. - max. 450 x 500 mm︱milling spindle speeds 10 - 165 U/min︱hob length max. 500 mm︱tip circle diameter 2050 mm︱tooth helical angle min/max 0 - 45 °︱center distance betw. workpiece-tool min/max. 150 - 1750 mm︱milling slide swivelling 50 Grad︱distance table / counter stay 1050 - 2050 mm︱shifting 300 mm︱workpiece weight 40 t︱table bore diameter 800 mm︱depth of hole 1100 mm︱main drive motor 37 kW︱min. workpiece diameter 290 mm︱
          Gear Hobbing Machine (also ideal for long and large shafts) equipped with: - CNC control Siemens Sinumerik 3 M for 4 axis (A/Y/X/Z) with electronic hand wheel - Automatic work cycles for axial, radial and tangential hobbing, crown/taper hobbing etc. - automatic single part equipment, taper milling, crowned milling, milling in several cuts, milling with indexing, changing feeds during milling, hobbing of the workpiece teeth,deep milling, automatic step-by-step milling shifting (Genaushifting), Diagonal milling - movable control panel - Universal hob head - set of change gears for differential gear (approx. 115pcs) - max workpiece dia with outer steady 2000mm, - tailstock column with tailstockarm, steadyrest support, dia 290 / 625 mm, - chip conveyor - paperband filter - cooling unit - Rexroth hydraulic - arbors (7) - levelling shoes (37) - automatic single indexing device Partially overhauled in 2006, e.g. new ball screw with nut,Table Bearing. Control system and electrics, motors were regularly adapted to the requirements.
            max. wheel diameter 3000 mm
            gear width 1200 mm
            max. module 30/40
            min. module 2
            table diameter 2500 mm
            table load capacity 400 kN
            hob dia. - max. 450 x 500 mm
            milling spindle speeds 10 - 165 U/min
            hob length max. 500 mm
            tip circle diameter 2050 mm
            tooth helical angle min/max 0 - 45 °
            center distance betw. workpiece-. 150 - 1750 mm
            milling slide swivelling 50 Grad
            distance table / counter stay 1050 - 2050 mm
            shifting 300 mm
            workpiece weight 40 t
            table bore diameter 800 mm
            depth of hole 1100 mm
            main drive motor 37 kW
            min. workpiece diameter 290 mm
            Description :
            Gear Hobbing Machine (also ideal for long and large shafts) equipped with:
            - CNC control Siemens Sinumerik 3 M for 4 axis (A/Y/X/Z)
            with electronic hand wheel
            - Automatic work cycles for axial, radial and tangential hobbing, crown/taper
            hobbing etc.
            - automatic single part equipment, taper milling, crowned milling,
            milling in several cuts, milling with indexing, changing feeds during milling,
            hobbing of the workpiece teeth,deep milling,
            automatic step-by-step milling shifting (Genaushifting), Diagonal milling
            - movable control panel
            - Universal hob head
            - set of change gears for differential gear (approx. 115pcs)
            - max workpiece dia with outer steady 2000mm,
            - tailstock column with tailstockarm, steadyrest support, dia 290 / 625 mm,
            - chip conveyor
            - paperband filter
            - cooling unit
            - Rexroth hydraulic
            - arbors (7)
            - levelling shoes (37)
            - automatic single indexing device

            Partially overhauled in 2006, e.g. new ball screw with nut,Table Bearing.
            Control system and electrics, motors were regularly adapted to the requirements.


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P3001 B CNC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03464 · Gear Hobbing Machine - Vertical

          PFAUTER - P3001 B CNC - - 1987 - Siemens

          Technical details
          max. wheel diameter 4400 mm︱gear width 645 mm︱max. module 35 ︱Control Siemens ︱main drive motor 37 kW︱table diameter 2500 mm︱max.helical angle +/- 30 °︱workpiece weight 40000 kg︱total power requirement 142 kVA︱weight of the machine ca. 75 t︱dimensions of the machine ca. m︱
            max. wheel diameter 4400 mm
            gear width 645 mm
            max. module 35
            Control Siemens
            main drive motor 37 kW
            table diameter 2500 mm
            max.helical angle +/- 30 °
            workpiece weight 40000 kg
            total power requirement 142 kVA
            weight of the machine ca. 75 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical WMW-MODUL ZFWZ 400/4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23076 · Gear Hobbing Machine - Vertical

          WMW-MODUL - ZFWZ 400/4 - - 1985 -

          Technical details
          max. wheel diameter 400 mm︱gear width 275 mm︱gear width 275 mm︱max. module 6 ︱weight of the machine ca. 5,3 t︱shifting 100 mm︱dist. cutter spindle - workpiece spindle 40/265 mm︱hob turning speeds 50-400 U/min︱
            max. wheel diameter 400 mm
            gear width 275 mm
            gear width 275 mm
            max. module 6
            weight of the machine ca. 5,3 t
            shifting 100 mm
            dist. cutter spindle - workpiece. 40/265 mm
            hob turning speeds 50-400 U/min


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical HURTH WF 450


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23077 · Gear Hobbing Machine - Vertical

          HURTH - WF 450 - - 1983 -

          Technical details
          max. wheel diameter 450 mm︱gear width 300 mm︱max. module 10 ︱min. module 0,5 ︱hob turning speeds 31 - 450 U/min︱total power requirement 28 kW︱weight of the machine ca. 12,5 t︱dimensions of the machine ca. 6,5 x 4,5 x 3,0 m︱
            max. wheel diameter 450 mm
            gear width 300 mm
            max. module 10
            min. module 0,5
            hob turning speeds 31 - 450 U/min
            total power requirement 28 kW
            weight of the machine ca. 12,5 t
            dimensions of the machine ca. 6,5 x 4,5 x 3,0 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical LIEBHERR L 3002 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06189 · Gear Hobbing Machine - Vertical

          LIEBHERR - L 3002 CNC - - 1982 / 2006 retrofit -

          Technical details
          max. wheel diameter 3000 mm︱gear width 1000 mm︱max. module ︱min. module ︱Control ︱total power requirement 40 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 7 x 4,5 x 4,75 m︱
          The machine was overhauled and modernized in 2006. CNC control: Siemens Sinumerik 840 D Table diameter: 2000 mm Max. wheel diameter: 3000 mm Gear width: 1000 mm Max. module: 24/28 Z axis: 1400 mm Y axis: 450 mm X-axis: 970 mm Max. helix angle: 45 ° Table hole diameter: 600 mm Distance between cutter center and table center: 200 - 2200 mm Hob diameter: 390 mm Maximum length of the cutter: 600 mm Rotary speeds of the hobs: 25 - 150 rpm Table load capacity max. 25000 kg Total power requirement: 40 kW Weight of the machine: 50 t Machine dimensions: 7 x 4.5 x 4.75 m Internal aggregate with the smallest internal fi 980mm and the largest internal fi 2200 driven. With the external head we can have the smallest external fi 950 mm and the largest external fi 2800.
            max. wheel diameter 3000 mm
            gear width 1000 mm
            total power requirement 40 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 7 x 4,5 x 4,75 m
            Description :
            The machine was overhauled and modernized in 2006.

            CNC control: Siemens Sinumerik 840 D

            Table diameter: 2000 mm
            Max. wheel diameter: 3000 mm
            Gear width: 1000 mm
            Max. module: 24/28
            Z axis: 1400 mm
            Y axis: 450 mm
            X-axis: 970 mm
            Max. helix angle: 45 °
            Table hole diameter: 600 mm
            Distance between cutter center and table center: 200 - 2200 mm
            Hob diameter: 390 mm
            Maximum length of the cutter: 600 mm
            Rotary speeds of the hobs: 25 - 150 rpm
            Table load capacity max. 25000 kg
            Total power requirement: 40 kW
            Weight of the machine: 50 t
            Machine dimensions: 7 x 4.5 x 4.75 m

            Internal aggregate with the smallest internal fi 980mm and the largest internal
            fi 2200 driven.
            With the external head we can have the smallest external fi 950 mm and the
            largest
            external fi 2800.



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical WMW-MODUL ZFWZ 250/5


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23059 · Gear Hobbing Machine - Vertical

          WMW-MODUL - ZFWZ 250/5 - - 1982 -

          Technical details
          max. wheel diameter 250 mm︱gear width 275 mm︱max. module 5 ︱table diameter mm︱weight of the machine ca. 5 t︱
            max. wheel diameter 250 mm
            gear width 275 mm
            max. module 5
            weight of the machine ca. 5 t
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical LORENZ F 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-693110 · Gear Hobbing Machine - Vertical

          LORENZ - F 400 - - 1977 -

          Technical details
          max. wheel diameter 400 mm︱gear width 280 mm︱max. module 1 ︱min. module 4 ︱total power requirement 15 kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 400 mm
            gear width 280 mm
            max. module 1
            min. module 4
            total power requirement 15 kW
            weight of the machine ca. 6000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P 900


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-688537 · Gear Hobbing Machine - Vertical

          PFAUTER - P 900 - - 1970 -

          Technical details
          max. wheel diameter 900 mm︱gear width 500 mm︱max. module 1 ︱min. module 10 ︱total power requirement 16 kW︱weight of the machine ca. 8.500 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 900 mm
            gear width 500 mm
            max. module 1
            min. module 10
            total power requirement 16 kW
            weight of the machine ca. 8.500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P 1800


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-597315 · Gear Hobbing Machine - Vertical

          PFAUTER - P 1800 - - 1966 -

          Technical details
          max. wheel diameter 1800 mm︱gear width 735 mm︱max. module 12 ︱min. module 1 ︱total power requirement 30 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. m︱
            max. wheel diameter 1800 mm
            gear width 735 mm
            max. module 12
            min. module 1
            total power requirement 30 kW
            weight of the machine ca. 23 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical SAMPUTENSILI WF 350 (HURTH MODUL)


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0448 · Gear Hobbing Machine - Vertical

          SAMPUTENSILI - WF 350 (HURTH MODUL) - - 12/2001 -

          Technical details
          max. wheel diameter 400 mm︱gear width 300 mm︱max. module 8 ︱min. module 3 ︱total power requirement 55 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 3,15 x 2,5 x 2,75 m︱
          Gear Hobbing Machine - Vertical / Brand: SAMPUTENSILI (Hurth Modul) Type: WF 350 / Year of construction: 2001 The machine can be inspected by appointment under working condition. Condition: Functional / ready for use. New electrical cabinet cooling in February 2024. General information on the high-performance compact machine: Universal use: - Gear hobbing Straight and helical gears Crowned conical toothing Worm gear wheels Multiple toothing Special profiles - Skive hobbing - Mould milling - HSS or carbide milling cutter - Wet or dry processing - Small, medium and large-scale production - Backlash-free twin-screw drive up to 120 rpm TECHNICAL DATA: Workpiece data: - Durchmesser max.: 400 mm - Module max.: 8 mm - Module min.: 3 mm Workspace - Workpiece: Workpiece table: - Diameter: 250 mm - Bore diameter: 150 mm - Depth: 270 mm - Feed rate radial: 40/270 mm - Feed rate axial: 200 - 600 mm Workspace - Tools: - Milling cutter diameter max.: 130/175 mm - Milling cutter length max.: 300 mm - Tangential path: 240 mm - Swivelling angle: +/- 45 degree Motorised milling head: - Spindle power: 14 kW * Backlash-free transmission of the rotary motion from the motor spindle to the milling spindle * Infinitely variable speed control within the ranges * Cutter arbour clamping device (clamping: mechanical, releasing: hydraulic) * Tangential slide guide: hydraulically clamped * Milling head swivelling on roller bearings with automatic clamping * Highly dynamic control with digital interface to the CNC control system * Interference immunity, high synchronisation quality Speeds, feeds, rapid traverses: - Milling speeds: 225 - 1.800 rpm - Workpiece speeds: 0,1 – 30 rpm Feed, rapid traverse: - radial: 0,1 – 5.000 mm/min - axial: 0,1 – 5.000 mm/min - tangential: 0,1 – 2.500 mm/min Electrics, control system: - Milling cutter drive: 18,5 kW - Total power requirement: 55 kVA - CNC path control (5-axis and milling spindle): Sinumerik 840C Machine dimensions: - Length x Width: 3.150 x 2.500 mm - Height: 2.750 mm - Weight net max.: 11.000 - 13.000 kg EQUIPMENT: - CNC path control (5-axis and milling spindle): Sinumerik 840C * Integrated programmable logic controller * Data exchange via interfaces * Remote diagnosis via modem - Emulsion equipment - Dry milling equipment (combination extraction system, chip deflector plates) - Oil mist cutting system for wet machining - Magnetic chip conveyor (width: 250 mm, discharge height: 1.000 mm) - Documentation There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -
            max. wheel diameter 400 mm
            gear width 300 mm
            max. module 8
            min. module 3
            total power requirement 55 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 3,15 x 2,5 x 2,75 m
            Description :
            Gear Hobbing Machine - Vertical / Brand: SAMPUTENSILI (Hurth Modul)
            Type: WF 350 / Year of construction: 2001

            The machine can be inspected by appointment under working condition.

            Condition: Functional / ready for use.

            New electrical cabinet cooling in February 2024.

            General information on the high-performance compact machine:
            Universal use:
            - Gear hobbing
            Straight and helical gears
            Crowned conical toothing
            Worm gear wheels
            Multiple toothing
            Special profiles
            - Skive hobbing
            - Mould milling
            - HSS or carbide milling cutter
            - Wet or dry processing
            - Small, medium and large-scale production

            - Backlash-free twin-screw drive up to 120 rpm

            TECHNICAL DATA:
            Workpiece data:
            - Durchmesser max.: 400 mm
            - Module max.: 8 mm
            - Module min.: 3 mm

            Workspace - Workpiece:
            Workpiece table:
            - Diameter: 250 mm
            - Bore diameter: 150 mm
            - Depth: 270 mm
            - Feed rate radial: 40/270 mm
            - Feed rate axial: 200 - 600 mm

            Workspace - Tools:
            - Milling cutter diameter max.: 130/175 mm
            - Milling cutter length max.: 300 mm
            - Tangential path: 240 mm
            - Swivelling angle: +/- 45 degree

            Motorised milling head:
            - Spindle power: 14 kW
            * Backlash-free transmission of the rotary motion from the motor spindle to
            the milling spindle
            * Infinitely variable speed control within the ranges
            * Cutter arbour clamping device (clamping: mechanical, releasing: hydraulic)
            * Tangential slide guide: hydraulically clamped
            * Milling head swivelling on roller bearings with automatic clamping
            * Highly dynamic control with digital interface to the CNC control system
            * Interference immunity, high synchronisation quality

            Speeds, feeds, rapid traverses:
            - Milling speeds: 225 - 1.800 rpm
            - Workpiece speeds: 0,1 – 30 rpm
            Feed, rapid traverse:
            - radial: 0,1 – 5.000 mm/min
            - axial: 0,1 – 5.000 mm/min
            - tangential: 0,1 – 2.500 mm/min

            Electrics, control system:
            - Milling cutter drive: 18,5 kW
            - Total power requirement: 55 kVA
            - CNC path control (5-axis and milling spindle): Sinumerik 840C

            Machine dimensions:
            - Length x Width: 3.150 x 2.500 mm
            - Height: 2.750 mm
            - Weight net max.: 11.000 - 13.000 kg

            EQUIPMENT:
            - CNC path control (5-axis and milling spindle): Sinumerik 840C
            * Integrated programmable logic controller
            * Data exchange via interfaces
            * Remote diagnosis via modem
            - Emulsion equipment
            - Dry milling equipment (combination extraction system, chip deflector plates)
            - Oil mist cutting system for wet machining
            - Magnetic chip conveyor (width: 250 mm, discharge height: 1.000 mm)
            - Documentation

            There is no guarantee for correctness and completeness of the technical details
            and accessories. - Subject to prior sale -


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer:

          OERLIKON - GLEASON -