,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Saws

          Machinelist: Saws


          Aluminium Circular Saw

          used Saws Aluminium Circular Saw KALTENBACH SKL 400


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-38638 · Aluminium Circular Saw

          KALTENBACH - SKL 400 - - Unbek. -

          Technical details
          saw blade diameter 400 mm︱cutting diameter 130 mm︱turning speed range 1420 / 2840 U/min︱total power requirement 4,5 kW︱weight of the machine ca. 0,6 t︱dimensions 1,1 x 0,9 x 1,8 m︱
          Semi-automatic aluminum cold circular saw with two speeds.
            saw blade diameter 400 mm
            cutting diameter 130 mm
            turning speed range 1420 / 2840 U/min
            total power requirement 4,5 kW
            weight of the machine ca. 0,6 t
            dimensions 1,1 x 0,9 x 1,8 m
            Description :
            Semi-automatic aluminum cold circular saw with two speeds.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw MEP COBRA 400 sa


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-38670 · Aluminium Circular Saw

          MEP - COBRA 400 sa - - 1995 -

          Technical details
          saw blade diameter 400 mm︱cutting diameter 130 mm︱turning speed range 2800 U/min︱total power requirement kW︱weight of the machine ca. 220 Kg︱dimensions 700 x 600 x 1700 m︱
          Semi-automatic - pneumatic. Stretcher - Footswitch
            saw blade diameter 400 mm
            cutting diameter 130 mm
            turning speed range 2800 U/min
            weight of the machine ca. 220 Kg
            dimensions 700 x 600 x 1700 m
            Description :
            Semi-automatic
            - pneumatic. Stretcher
            - Footswitch


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID Alujet 351


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66912 · Aluminium Circular Saw

          BERG & SCHMID - Alujet 351 - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 100 mm︱capacity 90 degrees: square 100 mm︱capacity 90 degrees: flat 100 x 195 mm︱capacity 45 degrees: round 100 mm︱capacity 45 degrees: square 100 mm︱capacity 45 degrees: square 100 x 135 mm︱saw blade turning speeds 2800 U/min︱total power requirement 1,5 kW︱weight of the machine ca. 250 kg︱dimensions 0,7 x 0,7 x 1,4 m︱
          ATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base
            saw blade diameter 350 mm
            capacity 90 degrees: round 100 mm
            capacity 90 degrees: square 100 mm
            capacity 90 degrees: flat 100 x 195 mm
            capacity 45 degrees: round 100 mm
            capacity 45 degrees: square 100 mm
            capacity 45 degrees: square 100 x 135 mm
            saw blade turning speeds 2800 U/min
            total power requirement 1,5 kW
            weight of the machine ca. 250 kg
            dimensions 0,7 x 0,7 x 1,4 m
            Description :
            ATTENTION: SPECIAL PRICE
            - Miter left/right 45°
            - fixed locking points at the most important miter angles
            - Pneumatic double clamping device
            - Safety engine brake
            - Complete with fog spray device and machine base


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID VELOX 350 PN


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66901 · Aluminium Circular Saw

          BERG & SCHMID - VELOX 350 PN - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 110 mm︱capacity 90 degrees: flat 200x88 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: square 110 mm︱capacity 45 degrees: square 150x80 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,22 t︱dimensions 0,7 x 0,9 x 1,9 m︱
          ATTENTION: SPECIAL PRICE!!! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 110 mm
            capacity 90 degrees: flat 200x88 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: square 110 mm
            capacity 45 degrees: square 150x80 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,22 t
            dimensions 0,7 x 0,9 x 1,9 m
            Description :
            ATTENTION: SPECIAL PRICE!!!
            - Miter left/right 45°
            - head diagonal cuts up to 45° (shifter)
            - Pneumatic double quick clamping device
            Vices close when lowering
            - Ball bearing table
            - Machine base
            - Powerful and powerful
            - High-quality workmanship


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw MEP COBRA 352 SX EVO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66918 · Aluminium Circular Saw

          MEP - COBRA 352 SX EVO - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 mm︱capacity 90 degrees: flat 180 x 70 mm︱capacity 45 degrees: round 120 mm︱capacity 45 degrees: square 100 mm︱capacity 45 degrees: square 135 x 60 mm︱saw blade turning speeds 1700 / 3400 U/min︱total power requirement 1,5/2,2 kW︱weight of the machine ca. 0,285 t︱dimensions 1,2 x 1,4 x 1,4 m︱
          Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 105 mm
            capacity 90 degrees: flat 180 x 70 mm
            capacity 45 degrees: round 120 mm
            capacity 45 degrees: square 100 mm
            capacity 45 degrees: square 135 x 60 mm
            saw blade turning speeds 1700 / 3400 U/min
            total power requirement 1,5/2,2 kW
            weight of the machine ca. 0,285 t
            dimensions 1,2 x 1,4 x 1,4 m
            Description :
            Semi-automatic circular saw for sawing solid and aluminum
            Hollow iron materials and light metal alloys with electro-welded
            Carbide toothed washer.
            Machine for miter cuts from 45° right to 45° left. Through the
            Alignment along the vertical is possible
            Sawing operations with the head inclined between 0° and 45° to the left.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw MEP Cobra 352 NC EVO 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66920 · Aluminium Circular Saw

          MEP - Cobra 352 NC EVO 5.0 - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 mm︱capacity 90 degrees: flat 180x70 mm︱capacity 45 degrees: round 120/110 mm︱capacity 45 degrees: square 10/95 mm︱capacity 45 degrees: flat 135x60 mm︱engine 2,5 ︱0 1700 / 3400 U/min︱weight of the machine ca. 600 kg︱dimensions 2,0 x 1,5 x 1,7 m︱
          COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for sawing of aluminum and light metal alloys for the use of HM circular saw blades. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 105 mm
            capacity 90 degrees: flat 180x70 mm
            capacity 45 degrees: round 120/110 mm
            capacity 45 degrees: square 10/95 mm
            capacity 45 degrees: flat 135x60 mm
            engine 2,5
            0 1700 / 3400 U/min
            weight of the machine ca. 600 kg
            dimensions 2,0 x 1,5 x 1,7 m
            Description :
            COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for
            sawing
            of aluminum and light metal alloys for the use of
            HM circular saw blades.

            Machine for miter cuts from 45° right to 45° left. Through the
            Alignment along the vertical is possible
            Sawing operations with the head inclined between 0° and 45° to the left.

            Numerically controlled circular saw machines with the new one specially
            designed by MEP for
            Automatic machines developed, Windows “CE” based control


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID VELOX 350 HA MPS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66902 · Aluminium Circular Saw

          BERG & SCHMID - VELOX 350 HA MPS - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 110 mm︱capacity 90 degrees: flat 200x88 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: square 110 mm︱capacity 45 degrees: square 150x80 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,27 t︱dimensions 1,1 x 0,95 x 1,7 m︱
          - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 110 mm
            capacity 90 degrees: flat 200x88 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: square 110 mm
            capacity 45 degrees: square 150x80 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,27 t
            dimensions 1,1 x 0,95 x 1,7 m
            Description :
            - Hydropneumatic semi-automatic
            - Miter left/right 45°
            - head diagonal cuts up to 45° (shifter)
            - Ball bearing table
            - pneumatic. Double clamping device
            - Machine base with fog spray device
            - Chip extraction socket on the saw blade protective hood


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw MEP COBRA 352 MA


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66917 · Aluminium Circular Saw

          MEP - COBRA 352 MA - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 mm︱capacity 90 degrees: flat 180 x 70 mm︱capacity 45 degrees: round 120 mm︱capacity 45 degrees: square 100 mm︱capacity 45 degrees: square 135 x 60 mm︱saw blade turning speeds 1700 / 3400 U/min︱total power requirement 1,5/2,2 kW︱weight of the machine ca. 0,210 t︱dimensions 0,9 x 1,4 x 1,4 m︱
          Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 105 mm
            capacity 90 degrees: flat 180 x 70 mm
            capacity 45 degrees: round 120 mm
            capacity 45 degrees: square 100 mm
            capacity 45 degrees: square 135 x 60 mm
            saw blade turning speeds 1700 / 3400 U/min
            total power requirement 1,5/2,2 kW
            weight of the machine ca. 0,210 t
            dimensions 0,9 x 1,4 x 1,4 m
            Description :
            Manual circular saw machine for sawing aluminum, miter cuts
            45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the
            Cobra 352 MA (automatic vice) the vices close
            automatically when the saw head is lowered.
            •Roller-bearing rotary table for quick and precise miter adjustment
            •Screw lock to lock the saw head in any angle position
            •Automatic saw blade lubrication
            •Clamping system consisting of two vices
            •Saw head locking in the upper position
            •Adjustable length stop for cuts of the same length
            •Vice opening 180 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw MEP TIGER 402 CNC HR 4.0 (Alu)


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66921 · Aluminium Circular Saw

          MEP - TIGER 402 CNC HR 4.0 (Alu) - - -neu- -

          Technical details
          saw blade diameter 130 mm︱capacity 90 degrees: round 130 mm︱capacity 90 degrees: square 120 mm︱capacity 90 degrees: flat 180 x 100 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: square 100 mm︱capacity 45 degrees: flat 120 x 100 mm︱engine 3,3 / 4,4 KW︱0 1400 / 2800 U/min︱weight of the machine ca. 1060 kg︱dimensions 2,5 x 1,8 x 1,85 m︱
          TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen.
            saw blade diameter 130 mm
            capacity 90 degrees: round 130 mm
            capacity 90 degrees: square 120 mm
            capacity 90 degrees: flat 180 x 100 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: square 100 mm
            capacity 45 degrees: flat 120 x 100 mm
            engine 3,3 / 4,4 KW
            0 1400 / 2800 U/min
            weight of the machine ca. 1060 kg
            dimensions 2,5 x 1,8 x 1,85 m
            Description :
            TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den
            Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis
            60° links auszuführen.



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID VELOX 350 VA MPS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66903 · Aluminium Circular Saw

          BERG & SCHMID - VELOX 350 VA MPS - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 110 mm︱capacity 90 degrees: flat 200x88 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: square 110 mm︱capacity 45 degrees: square 150x80 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,59 t︱dimensions 1,9 x 1,4 x 1,8 m︱
          Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 110 mm
            capacity 90 degrees: flat 200x88 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: square 110 mm
            capacity 45 degrees: square 150x80 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,59 t
            dimensions 1,9 x 1,4 x 1,8 m
            Description :
            Hydropneumatic fully automatic
            · Miter Left/Right
            · Bevel head cuts up to 45° (shifter) a. b.
            · Hydro-pneumatic control of the saw head
            · Pneumatic double clamping device
            · Pneumatic vertical clamping device
            · Electro-pneumatic material feed unit with material hold-down device
            · Vernier for length adjustment
            · Integrated coolant spray device
            · Swarf suction nozzle on the saw blade protective hood
            · Leftover piece length in automatic mode 210 mm
            MPS control:
            · Save cut start/end
            · Display of current consumption, number of pieces, cutting time...
            · Adjustable water cooling
            · Cutting pressure regulator


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID MultiCut 530HA


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66911 · Aluminium Circular Saw

          BERG & SCHMID - MultiCut 530HA - - -neu- -

          Technical details
          saw blade diameter 530 mm︱capacity 90 degrees: round 180 mm︱capacity 90 degrees: square 170 mm︱capacity 90 degrees: flat 380x70 mm︱capacity 45 degrees: round 180 mm︱capacity 45 degrees: square 150 mm︱capacity 45 degrees: square 290x70 mm︱total power requirement 2,2 kW︱weight of the machine ca. 350 t︱dimensions 1,1 x 0,9 x 1,5 m︱
          Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Saw blade optional
            saw blade diameter 530 mm
            capacity 90 degrees: round 180 mm
            capacity 90 degrees: square 170 mm
            capacity 90 degrees: flat 380x70 mm
            capacity 45 degrees: round 180 mm
            capacity 45 degrees: square 150 mm
            capacity 45 degrees: square 290x70 mm
            total power requirement 2,2 kW
            weight of the machine ca. 350 t
            dimensions 1,1 x 0,9 x 1,5 m
            Description :
            Underfloor aluminum circular saw, hydropneumatic semi-automatic.
            · Maintenance unit for pneumatic control
            · Turntable with ball bearings
            · Suction nozzle for chip extraction system
            · 2 pneumatic vertical clamps
            · Rotation range 180°
            · Movable rear material stop = enlargeable cutting area
            · Saw blade feed continuously adjustable
            · Two-hand safety control
            Horizontal vices (option)
            · Mist spray device for cooling emulsion
            · Engine braking
            · Machine base
            · The use of our B & S Coolmatic Plus is mandatory for profile cuts
            necessary
            . Saw blade optional


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw OZMACHINE VEGA-II  400


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66923 · Aluminium Circular Saw

          OZMACHINE - VEGA-II 400 - - -neu- -

          Technical details
          saw blade diameter 400 mm︱capacity 90 degrees: round 130 mm︱capacity 90 degrees: flat 160 x 130 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: flat 110 x 125 mm︱saw blade turning speeds 3000 U/min︱total power requirement 1,75 kW︱weight of the machine ca. 140 kg︱dimensions 1,0 x 0,65 x 1,5 m︱
          Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet
            saw blade diameter 400 mm
            capacity 90 degrees: round 130 mm
            capacity 90 degrees: flat 160 x 130 mm
            capacity 45 degrees: round 110 mm
            capacity 45 degrees: flat 110 x 125 mm
            saw blade turning speeds 3000 U/min
            total power requirement 1,75 kW
            weight of the machine ca. 140 kg
            dimensions 1,0 x 0,65 x 1,5 m
            Description :
            Alu miter saw
            - Miter left/right 45°
            - pneumatic double clamping device
            - with mist spray device
            - with machine base
            - Roller conveyor 3m with material stop
            - Machine feet


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID MultiCut 401 HA


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66910 · Aluminium Circular Saw

          BERG & SCHMID - MultiCut 401 HA - - -neu- -

          Technical details
          saw blade diameter 400 mm︱capacity 90 degrees: round 110 mm︱capacity 90 degrees: square 100 mm︱capacity 90 degrees: flat 200x60 mm︱capacity 45 degrees: round 100 mm︱capacity 45 degrees: square 100 mm︱capacity 45 degrees: square 140x60 mm︱total power requirement 1,5 kW︱weight of the machine ca. 130 t︱dimensions 0,8 x 0,7 x 1,3 m︱
          SPECIAL PRICE!! Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade
            saw blade diameter 400 mm
            capacity 90 degrees: round 110 mm
            capacity 90 degrees: square 100 mm
            capacity 90 degrees: flat 200x60 mm
            capacity 45 degrees: round 100 mm
            capacity 45 degrees: square 100 mm
            capacity 45 degrees: square 140x60 mm
            total power requirement 1,5 kW
            weight of the machine ca. 130 t
            dimensions 0,8 x 0,7 x 1,3 m
            Description :
            SPECIAL PRICE!!
            Underfloor aluminum circular saw, hydropneumatic semi-automatic.
            · Maintenance unit for pneumatic control
            · Turntable with ball bearings
            · Suction nozzle for chip extraction system
            · 2 pneumatic vertical clamps
            · Rotation range 180°
            · Movable rear material stop = enlargeable cutting area
            · Saw blade feed continuously adjustable
            · Two-hand safety control
            Horizontal vices (option)
            · Mist spray device for cooling emulsion
            · Engine braking
            · Machine base
            · The use of our B & S Coolmatic Plus is mandatory for profile cuts
            necessary
            . Optional saw blade


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw OZMACHINE METEOR-I  420


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66922 · Aluminium Circular Saw

          OZMACHINE - METEOR-I 420 - - -neu- -

          Technical details
          saw blade diameter 420 mm︱capacity 90 degrees: round 130 mm︱capacity 90 degrees: flat 160 x 100 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: square 130 x 80 mm︱turning speeds 3000 U/min︱engine output 2,0 kW︱total power requirement 2,0 kW︱weight of the machine ca. 190 Kg︱dimensions 3,0 x 1,0 x 1,3 m︱
          Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet
            saw blade diameter 420 mm
            capacity 90 degrees: round 130 mm
            capacity 90 degrees: flat 160 x 100 mm
            capacity 45 degrees: round 110 mm
            capacity 45 degrees: square 130 x 80 mm
            turning speeds 3000 U/min
            engine output 2,0 kW
            total power requirement 2,0 kW
            weight of the machine ca. 190 Kg
            dimensions 3,0 x 1,0 x 1,3 m
            Description :
            Underfloor aluminum circular saw
            - Hydropneumatic semi-automatic
            - pneum. Workpiece clamping device
            - Roller conveyor with material stop
            - Machine feet


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw BERG & SCHMID VELOX 350 VA CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66904 · Aluminium Circular Saw

          BERG & SCHMID - VELOX 350 VA CNC - - -neu- -

          Technical details
          saw blade diameter 350 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 110 mm︱capacity 90 degrees: flat 200x88 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: square 110 mm︱capacity 45 degrees: square 150x80 mm︱Control ︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,59 t︱dimensions 1,1 x 0,95 x 1,7 m︱
          SPECIAL PRICE!!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry
            saw blade diameter 350 mm
            capacity 90 degrees: round 120 mm
            capacity 90 degrees: square 110 mm
            capacity 90 degrees: flat 200x88 mm
            capacity 45 degrees: round 115 mm
            capacity 45 degrees: square 110 mm
            capacity 45 degrees: square 150x80 mm
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,59 t
            dimensions 1,1 x 0,95 x 1,7 m
            Description :
            SPECIAL PRICE!!!
            Hydropneumatic fully automatic
            · Miter Left/Right
            · Bevel head cuts up to 45° (shifter) a. b.
            · Pneumatic vertical clamping device
            · Vice before and after the saw blade for low-burr cuts
            · Material hold-down roller
            · Integrated coolant spray device
            · Swarf suction nozzle on the saw blade protective hood
            · Single feed 530 mm
            · Section length min. 4 mm max. 9,999 mm
            For profile cuts, the use of our B & S Coolmatic Plus is mandatory
            necessary.

            CNC Control:
            · With button for over 90 different sawing programs with 99 sub-programs
            for length, quantity and angle
            · Automatic feed unit 2,000 mm via ball screw
            Incremental feed with automatic length compensation.
            Adjustable for cutting lengths from 25 - 9,999 mm.
            · Fully hydraulic control of saw frame and clamping devices
            · Pre-selection of 3 different material feed speeds
            · Visualization of the entire workflow with simple data entry


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Aluminium Circular Saw MEP COBRA 400 RPN4


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-38639 · Aluminium Circular Saw

          MEP - COBRA 400 RPN4 - - -

          Technical details
          saw blade diameter 400 mm︱cutting diameter 130 mm︱turning speed range 2800 U/min︱total power requirement kW︱weight of the machine ca. 220 t︱dimensions 700 x 600 x 1700 m︱
            saw blade diameter 400 mm
            cutting diameter 130 mm
            turning speed range 2800 U/min
            weight of the machine ca. 220 t
            dimensions 700 x 600 x 1700 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID SBS 550 VA-I / CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66275 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - SBS 550 VA-I / CNC - - -neu- -

          Technical details
          550 mm︱ 550 mm︱ 550 x 550 mm︱saw band length 5980 x 41 x 1,3 mm︱table height 800 mm︱band speed 20 - 100 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 3,8 t︱dimensions 3,0 x 2,15 x 2,2 m︱
          PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.
            550 mm
            550 mm
            550 x 550 mm
            saw band length 5980 x 41 x 1,3 mm
            table height 800 mm
            band speed 20 - 100 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 3,8 t
            dimensions 3,0 x 2,15 x 2,2 m
            Description :
            PROMOTIONAL PRICE!!!!
            2-column high-performance automatic band saws from the SBS series
            The SBS series impresses with its sophisticated technology, high quality and
            longevity
            and unrivaled, sophisticated standard equipment.
            • Modern SNC 20 control for CNC version
            • Frequency-controlled saw drive
            • Control buttons with pictograms
            • Work light
            • Powered chip brush
            • Hydraulic belt tension
            • Clamping pressure regulation
            • Double vice (before and after the belt)
            • Creep path for positioning
            • Bundle tension prepared electrically and hydraulically
            • Chip conveyor
            The SNC 20 control allows you to enter up to 20 different sawing tasks (length
            and number of pieces) conveniently and easily. When the target dimension is
            entered, the control automatically calculates the saw waste and the number of
            feeds. Additionally, the error code display system provides quick analysis for
            troubleshooting.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP SHARK 230-1 NC HS 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66306 · Band Saw - Automatic - Horizontal

          MEP - SHARK 230-1 NC HS 5.0 - - -neu- -

          Technical details
          230 mm︱ 230 x 230 mm︱saw band length 2950 x 27 x 0,9 mm︱table height mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,2 t︱dimensions m︱
          SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based Controls.SOME FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band
            230 mm
            230 x 230 mm
            saw band length 2950 x 27 x 0,9 mm
            band speed 15 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,2 t
            Description :
            SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw
            with
            semi-automatic function for 0° cuts of mild steel, stainless steel,
            Steel alloys, solid and profile material, with a maximum remaining piece length
            of 60 mm.
            - The cross section is max. 230x230 mm.
            - Numerically controlled band saw machines with the new, specially designed by
            MEP developed for Automatic Windows “CE” based
            Controls.SOME FEATURES:
            - User interface with 7” touch screen display and mechanical buttons
            for the operating functions of the sawing machine, guaranteed reliable
            Operation, simple and intuitive, and real-time control of all
            Cutting parameters.
            - Safety enclosure in accordance with the latest safety regulations
            Machinery Directive EN 13898/2007.
            - New fieldbus communication system with double microprocessor
            Serial connection.
            - Robust cast iron structure (G25) to compensate for vibrations
            Improve machine stability and protect the saw band


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP SHARK 350 NC HS 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66307 · Band Saw - Automatic - Horizontal

          MEP - SHARK 350 NC HS 5.0 - - -neu- -

          Technical details
          355 mm︱ 350 x 350 mm︱saw band length 4640 x 34 x 1,1 mm︱table height mm︱band speed 15 - 115 m/min︱total power requirement 4,0 kW︱weight of the machine ca. 2,8 t︱dimensions 3,1 x 2,2 x 2,2 m︱
          Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters
            355 mm
            350 x 350 mm
            saw band length 4640 x 34 x 1,1 mm
            band speed 15 - 115 m/min
            total power requirement 4,0 kW
            weight of the machine ca. 2,8 t
            dimensions 3,1 x 2,2 x 2,2 m
            Description :
            Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two
            Column construction for 0° cuts on solid material and steel profiles,
            Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard
            equipment
            includes:
            + Powered chip conveyor, can be installed on the right or left of the machine.
            + Clamping pressure regulation of the vices.
            + Feeder with vertical rollers for lateral material support.
            + Numerically controlled band saw machines, which are also operated semi-
            automatically
            can be done with the new MEP 50, especially from MEP for automatic
            Machine developed, Windows “CE” based control.
            + Cutting cycle “clean cut” The feeder pushes the workpiece
            at the back to avoid scoring on the cutting surface when the tape
            moves up again at the end of the cut.
            + Fieldbus communication system with double microprocessor and serial
            Connection.
            + The user interface with 7” touch screen display and mechanical
            Buttons are used to ensure the operating functions of the sawing machine
            reliable, simple and intuitive use, as well as a
            Real-time control of all cutting parameters


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP - VOLLAUTOMAT SHARK 331-1 SPIDER 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66309 · Band Saw - Automatic - Horizontal

          MEP - VOLLAUTOMAT - SHARK 331-1 SPIDER 5.0 - - -Neu- - NC

          Technical details
          cutting diameter 280 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 330 mm︱Control NC ︱capacity 90 degrees: flat 330x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,24 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱
          Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep
            cutting diameter 280 mm
            saw band length 3320 x 27 x 0,9 mm mm
            cutting width 330 mm
            Control NC
            capacity 90 degrees: flat 330x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            band speed 15 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,24 t
            dimensions of the machine ca. 3,3 x 2,83 x 2,23 m
            Description :
            Attention: special price!!!
            •Fully automatic hydraulic band saw
            •Miter cuts up to 60° left possible
            •Saw band length: 3650x27x0.9
            •Single stroke: 600 mm (programmable up to 10m)
            •Simple touchscreen operation.
            •Saw arm made of nodular cast iron - robust and stable
            •Required space 3.4 m²
            •Footprint 1900mm wide x 1800mm deep


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP - VOLLAUTOMAT SHARK 332-1 NC 5.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66310 · Band Saw - Automatic - Horizontal

          MEP - VOLLAUTOMAT - SHARK 332-1 NC 5.0 - - -Neu- - NC

          Technical details
          cutting diameter 300 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 300 mm︱Control NC ︱capacity 90 degrees: flat 330x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱
          Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts
            cutting diameter 300 mm
            saw band length 3320 x 27 x 0,9 mm mm
            cutting width 300 mm
            Control NC
            capacity 90 degrees: flat 330x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: square 250 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            band speed 15 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 3,3 x 2,83 x 2,23 m
            Description :
            Furnishing:
            - fully automatic electro-hydraulic band saw with additional
            semi-automatic, semi-automatic-dynamic and
            manual operation
            - Automatic cycle (cuts from 0° to 60° left)
            - Semi-automatic, semi-automatic-dynamic and
            manual cycle (cuts from 45° right to 60° left)
            - Manual or semi-automatic dynamic cycle to make cuts outside
            of series production can be carried out directly without programming.
            - Numerically controlled band saw machines with the new, especially from MEP
            Windows CE based controller developed for automatic machines.
            - User interface with touch screen display of 7 and mechanical buttons for
            the operating functions of the sawing machine.
            - Stepless regulation of the cutting speed from 15 to 100 m/min
            Frequency converter (inverter).
            - Material feed with stepper motor via ball screw
            - which is mounted on opposite ball bearings; Single stroke 600 mm
            - repeatable to cut to any length.
            - Automatic monitoring of cutting load
            - through a servo valve mounted directly on the cylinder.
            - The coolant pan is installed in the base frame
            - Chip clearing brush.
            - Bimetal saw band for solid and profile material.
            - Tools and instructions for use with a list of spare parts


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEP SHARK 350 CNC HS 4.0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66311 · Band Saw - Automatic - Horizontal

          MEP - SHARK 350 CNC HS 4.0 - - -neu- -

          Technical details
          355 mm︱ 350 x 350 mm︱saw band length 4640 x 34 x 1,1 mm︱band speed 15 - 115 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 2,8 t︱dimensions 3,2 x 2,2 x 2,7 m︱
          Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.
            355 mm
            350 x 350 mm
            saw band length 4640 x 34 x 1,1 mm
            band speed 15 - 115 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 2,8 t
            dimensions 3,2 x 2,2 x 2,7 m
            Description :
            Automatic electromechanical band saw machine in two-column design for 0°
            Cuts on solid material and profiles made of steel, stainless steel and
            Steel alloys up to a maximum of 350x350 mm.

            The standard equipment includes:
            Powered chip conveyor, to be mounted on the right or left of the machine.
            Clamping pressure regulation of the vices.
            Feeder with vertical rollers for lateral material support.
            Sensors for initial material detection.
            Clamping pressure regulation.
            300 programs can be saved.
            The machine is available with a 34 or 41 band - at no extra charge.
            Price on request.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID SBS 460 VA-I / CNC


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66274 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - SBS 460 VA-I / CNC - - -neu- -

          Technical details
          460 mm︱ 460 mm︱ 460 x 460 mm︱saw band length 5450 x 41 x 1,3 mm︱table height 800 mm︱band speed 20 - 100 m/min︱total power requirement 5,5 kW︱weight of the machine ca. 3,2 t︱dimensions 2,675x 2,15 x 2,05 m︱
          PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.
            460 mm
            460 mm
            460 x 460 mm
            saw band length 5450 x 41 x 1,3 mm
            table height 800 mm
            band speed 20 - 100 m/min
            total power requirement 5,5 kW
            weight of the machine ca. 3,2 t
            dimensions 2,675x 2,15 x 2,05 m
            Description :
            PROMOTIONAL PRICE!!!!
            2-column high-performance automatic band saws from the SBS series
            The SBS series impresses with its sophisticated technology, high quality and
            longevity
            and unrivaled, sophisticated standard equipment.
            • Modern SNC 20 control for CNC version
            • Frequency-controlled saw drive
            • Control buttons with pictograms
            • Work light
            • Powered chip brush
            • Hydraulic belt tension
            • Clamping pressure regulation
            • Double vice (before and after the belt)
            • Creep path for positioning
            • Bundle tension prepared electrically and hydraulically
            • Chip conveyor
            The SNC 20 control allows you to enter up to 20 different sawing tasks (length
            and number of pieces) conveniently and easily. When the target dimension is
            entered, the control automatically calculates the saw waste and the number of
            feeds. Additionally, the error code display system provides quick analysis for
            troubleshooting.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal BERG & SCHMID X-Smart 3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-66260 · Band Saw - Automatic - Horizontal

          BERG & SCHMID - X-Smart 3 - - -neu- -

          Technical details
          310 mm︱ 310 mm︱ 340 x 310 mm︱saw band length 3730 x 34 x 1,1 mm︱table height 922 mm︱band speed 15 - 100 m/min︱total power requirement 3,0 kW︱weight of the machine ca. 1,65 t︱dimensions 1950x1755 m︱
          2-column automatic band saw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities • Inclination of the saw frame for maximum service life of the saw band • 2-column structure linearly guided on both sides • Linear guided button for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material • Feed unit via precision ball screw • Double vise before and after the saw band • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full fairing with easy access for maintenance and cleaning • LED work light • Minimum remaining piece length of 50 mm • Waistband tensioning device (option)
            310 mm
            310 mm
            340 x 310 mm
            saw band length 3730 x 34 x 1,1 mm
            table height 922 mm
            band speed 15 - 100 m/min
            total power requirement 3,0 kW
            weight of the machine ca. 1,65 t
            dimensions 1950x1755 m
            Description :
            2-column automatic band saw X-Smart 3
            • Modern CNC control, freely programmable for multiple sawing jobs
            various cutting lengths and quantities
            • Inclination of the saw frame for maximum service life of the saw band
            • 2-column structure linearly guided on both sides
            • Linear guided button for automatic cutting height detection
            • Hydraulic clamping pressure reduction (option) for thin-walled pipes and
            profiles
            • Hydraulic cutting pressure regulation for maximum cutting performance
            • Material feed carriage in bridge construction for optimal performance
            Transport/feed and tension of the saw material
            • Feed unit via precision ball screw
            • Double vise before and after the saw band
            • Electrically driven chip conveyor
            • Cleaning gun for easy cleaning of the system
            • Full fairing with easy access for maintenance and cleaning
            • LED work light
            • Minimum remaining piece length of 50 mm
            • Waistband tensioning device (option)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Saws for every imaginable project at LagerMaschinen
          Saws offer efficiency, accuracy and versatility.

          Saws have stood the text of time as some of the most functional tools for the cutting and shaping of materials. Saws can be used on a huge range of materials and, depending on the type of saw, can offer users extreme efficiency or optimal precision. From handheld equipment to large scale machinery, from manually operated machines to CNC saws, you can find the best selection of saws and more at LagerMaschinen, your online marketplace for used machines.

          Saws are a smart investment for home or business

          Saws are invaluable tools in a wide variety of different fields. The automotive, paper production, furniture manufacturing and construction industries are just a handful of examples of the importance of saws in everyday life. Whether you use manually operated saws for home projects are large-scale equipment for industrial manufacturing, finding good used saws at a reasonable price may seem overwhelming, but visiting the user-friendly platform at LagerMaschinen takes the hassle out of shopping for used machines.

          Used machines at your fingertips at LagerMaschinen

          If you want to save yourself time and money, consider purchasing your next piece of used machinery online at LagerMaschinen. Shopping online for used machines has a number of advantages. Firstly, you can browse for equipment like saws, drills, presses, etc. from the comfort of your home or office, anytime day or night. Secondly, you can sort your results by model, size, price or location, making it easy to find just what you need for any project. Visit LagerMaschinen and see how easy buying online can be.