Bandsaw - Horizontal

cutting diameter 280 mm︱capacity 90 degrees: flat 380 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱

---

Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

cutting diameter 330 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: square 320 x 320 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱

---

Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3320 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱

---

Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 485 kg︱dimensions of the machine ca. 1700 x 1000 x 1800 mm︱

---

Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO

Sawing capacity round 160 mm︱Sawing capacity square 160 mm︱Sawing capacity rectangular 160 x 200 mm︱Sawing Angle 45/60 Grad︱cutting speed 33/66 m/min︱total power requirement 1,9 kW︱weight of the machine ca. 310 t︱required space 1,1 x 0,8 x 1,5 m︱

---

cutting diameter 250 mm︱saw band length 2950x27x0,9 mm︱table height mm︱band speed 36/72 m/min︱total power requirement 1,8 kW︱weight of the machine ca. 440 kg︱dimensions of the machine ca. m︱

---

Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

cutting diameter 250 mm︱saw band length 2950 x 27 x 0,9 mm︱table height ca. 800 mm︱band speed 36/72 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,37 t︱dimensions of the machine ca. m︱

---

MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 485 kg︱dimensions of the machine ca. 1700 x 1000 x 1800 mm︱

---

Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

cutting diameter 300 mm︱saw band length 3320 x 27 x 0,9 mm︱table height mm︱band speed 40/80 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 670 kg︱dimensions of the machine ca. m︱

---

How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱turning speed range: 36 / 72 m/min︱dimensions of saw-band 2950 x 25,4 x 0,9 mm︱weight of the machine ca. 0,4 t︱Dimensions (LxWxH) 1,5 x 0,9 x 1,5 ︱

---

Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!