Crank Press - Double Column

pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱

---

Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱

---

year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables

pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱

---

permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱

---

permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F

pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱

---

permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation

pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱

---

permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F

pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱

---

with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation

pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱

---

with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment

pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱

---

permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation

pressure 2 t︱throat 150 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up mm︱table surface area 310 x 250 mm︱hole in the table mm︱table height over floor mm︱power requirement 2,0 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,2 x 0,8 x 1,7 m︱

---

Single column press - with table base - various press accessories

Press capacity 50 t︱Throat depth 265 mm︱Stroke 250 mm︱Daylight 400 mm︱Table surface area 700 x 450 mm︱Approach speed 32 mm / s︱Working speed 6,3 mm / s︱Return speed 42 mm / s︱Dimensions L x W x H 1290 x 1160 x 2085 mm︱Weight of machine approx. 1,75 t︱

---

pressure 28 t︱throat 225 mm︱stroke 150 mm︱table surface area 325 x 300 mm︱work speed 2 - 9,8 mm/sek︱return speed 12,8 mm/sek︱total power requirement 4 kW︱weight of the machine ca. 650 kg︱dimensions of the machine ca. 1800 x 900 x 2000 mm︱

---

- NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

pressure 160 t︱throat 350 mm︱stroke 140 mm︱dayligth 370 mm︱table surface area 750 x 620 mm︱hole in the table 220 mm︱table height over floor 850 mm︱ram surface 750 x 580 mm︱oil volume 700 l︱feed down 300 mm/sec︱feed up 480 mm/sec︱feed under pressure 58 mm/sec︱total power requirement 60 kW︱weight of the machine ca. 10,8 t︱required space 2,4 x 1,8 x 3,5 m︱

---

permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995

pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front ︱

---

Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²

pressure 25 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume 300 l︱power requirement 5,5 kW︱Weight 5,8 t︱dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm︱

---

permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Pressing force 10 t︱oil pressure max. in the work cylinder 310 bar︱engine output 3 kW︱tracking travel 70 ms 8 mm︱weight 1650 kg︱

---

pressure 30 t︱throat max. 250 mm︱stroke max. 200 mm︱dayligth 475 mm︱table surface area 550 x 500 mm︱weight of the machine ca. 2050 kg︱power stroke 20 mm︱

---

pressure 40 t︱throat 300 mm︱stroke 630 mm︱dayligth 900 mm︱table surface area 620 x 520 mm︱hole in the table 150 mm︱table height over floor 600 mm︱ram surface 150 mm︱total power requirement 15,0 kW︱weight of the machine ca. 4,5 t︱required space 1,0 x 1,9 x 3,0 m︱

---

permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

pressure 40 t︱throat 330 mm︱stroke 250 mm︱dayligth 450 mm︱table surface area 800 x 500 mm︱hole in the table 100 mm︱table height over floor 900 mm︱ram surface 100 mm︱feed down 406 mm/sec︱feed up 393 mm/sec︱feed under pressure 14 mm/sec︱oil volume 350 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,6 t︱required space 1,3 x 2,3 x 3,4 m︱

---

permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse

pressure 10 t︱throat 0 mm︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6500 t︱dimensions of the machine ca. m︱

---

D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)

pressure 63 t︱stroke 160 mm︱throat 280 mm︱dayligth 360 mm︱table surface area 560 x 490 mm︱table height over floor 860 mm︱ram surface 280 x 280 mm︱oil volume l︱power requirement 22,0 kW︱Weight 3,6 t︱dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm︱hole in the table 125 mm︱

---

year of manufacture1980 Modernization of control 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

pressure 2 x 6,3 t︱stroke 307 mm︱throat 180 mm︱dayligth 900 mm︱table surface area 470 x 360 mm︱die cushion capacity t︱die cushion stroke mm︱die cushion area mm︱table height over floor 810 mm︱ram surface 45 mm︱feed down 137 mm/s︱feed up 33 mm/s︱working feed 540 mm/s︱oil volume 140 l︱power requirement 3,0 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm︱

---

permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

pressure 100 t︱throat 320 mm︱stroke 160 mm︱dayligth 480 mm︱table surface area 630 x 550 mm︱hole in the table 200 mm︱table height over floor 860 mm︱ram surface 560 x 450 mm︱oil volume 500 l︱total power requirement 30,5 kW︱weight of the machine ca. 6,4 t︱required space 1,6 x 2,0 x 2,9 m︱

---

year of manufacture 1979 overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

pressure 100 t︱throat 300 mm︱stroke 400 mm︱oil volume 300 l︱diameter of piston 200 mm︱piston speed, rapid traverse 121 mm/s︱piston speed, low pressure 60 mm/s︱piston speed, high pressure 9 mm/s︱piston speed, retracting movement 117 mm/s︱piston rod diameter 140 mm︱table surface area 740 x 580 mm︱table height over floor 900 mm︱ram surface 600 x 500 mm︱quantity of oil 300 l︱total power requirement 11 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 1,0 x 1,76 x 2,52 m︱

---