,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
          Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Vögtle Service GmbH   73054 - Eislingen Friedhofstr. 115 Deutschland
          Vögtle Service GmbH

          Friedhofstr. 115



          Contact Trader


            Vögtle Service GmbH
           Friedhofstr. 115
            73054 - Eislingen
            Deutschland
            +49 71 61 99 73- 0
            +49 71 61 99 73- 13
            Thomas.Ruckh@voegtle.de
            www.voegtle.de
            Contact person:

            Haben Sie eine Presse abzugeben? Wir kaufen Ihre gute Gebrauchte. Bitte nehmen Sie Kontakt mit uns auf!




          Machine category


          Abfallschere · Abgratpresse · Abkantpresse - hydraulisch · Abrollmulde-Richtmaschine · Abwickelhaspel · Abwickelhaspel-Richtmaschine · Aufspannplatte · Auswerfer · Bandanlage · Bandbeöler · Differenzwegpresse · Doppeldruckpresse · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Doppelständerziehpresse - Mechanisch · Einsenkpresse · Einständerpresse - Hydraulisch · Einständerziehpresse - Hydraulisch · Exzenterpresse - Einständer · Haspel · Hydroformpresse · Kniegelenkpresse - Einständer · Kniehebelpresse - Einständer · Luftkessel · Nutenstanze · Pneumatische Presse · Richtmaschine · Richtplatte · Richtpresse - Einständer · Schmiedepresse · Spindelpresse · Stanzautomat-Doppelständer · Taumel- und Nietmaschine · Tuschierpresse · Verschiebetisch · Vorschubrichtmaschine · Walzenvorschub · Werkzeugprobierpresse · Werkzeugwechselwagen · Zangenvorschub · Ziehkissen ·