Pneumatic Press
Machinelist: Pneumatic Press
Pneumatic Press
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-06403 · Pneumatic Press
MEIER WERKE - A3 - - unbekannt -
Technical details
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-113132 · Pneumatic Press
BURGER - DO 5 - - ? - konventionell
Technical details
permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with adjustable table, foot operation can be offered with or without putting into operation
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-063138 · Pneumatic Press
BURGER - DO 3 - - ? - konventionell
Technical details
permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) press force at minimum stroke length approx. 1,5 t stroke rate at minimum stroke length up to approx. 80 /min stroke rate at minimum stroke length up to approx. 60 /min hole in table approx. 45 mm can be offered with or without putting into operation
- G. FOLMER Industriebedarf
- Mangenbergerstr. 347
- 42655 Solingen
- Deutschland
-
+49 21241071
+49 21241276 -
folmer.maschinen@t-online.de
Datasheet
Request / Contact
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-233011 · Pneumatic Press
TOX - MAG 030.202.A.001 (CE) - - 2005 - Siemens S 7
Technical details
permitted for manual loading according to the CE-norm Gesamthub 190 mm / Krafthub 10 mm Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection Universal underframe UUM 1-200.031 Adjustable working height Total stroke 190 mm / power stroke 10 mm
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-69531 · Pneumatic Press
BERG & SCHMID - PND 85/S - - - neu - -
Technical details
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-69530 · Pneumatic Press
BERG & SCHMID - PND 45/S - - - neu - -
Technical details
Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings
Single Column Press - Hydraulic
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-41230 · Single Column Press - Hydraulic
HANNIFIN - F20-21N - - unbek. -
Technical details
Single column press - with table base - various press accessories
- Pressen HAAS GmbH
- Kreuzsteig 6
- 72479 Straßberg
- Deutschland
-
+49 7574 59 97 59
+49 7574 92 17 24 -
info@pressen-haas.de
www.pressen-haas.de
#2053-0358 · Single Column Press - Hydraulic
PROFI PRESS - PPCM - 50 - - 2022 -
Technical details
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-7346 · Single Column Press - Hydraulic
RHTC - PPC 28 - - 2021 (NEU) -
Technical details
- NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-103044 · Single Column Press - Hydraulic
NEFF - CHS 160 (UVV) - - 2020 - Siemens S7-1500F
Technical details
permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-12318 · Single Column Press - Hydraulic
OMERA - OPI-25C - - 2001 -
Technical details
Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²
Datasheet
Request / Contact
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-233012 · Single Column Press - Hydraulic
EXNER - EEX 25 (UVV) - - 2000 - Siemens S 5
Technical details
permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
- Matthias Ehlers Werkzeugmaschinen
- Nikolaus-Otto-Straße 19 + 21
- 22946 Trittau
- Deutschland
-
+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14 -
anfrage@ehlers-wzm.de
www.ehlers-wzm.de
#2033-2024018 · Single Column Press - Hydraulic
DUNKES - HZT 10 - - 2000 -
Technical details
Datasheet
Request / Contact
- Ambold Pressen GmbH
- Sommeritzer Straße 43
- 04626 Schmölln
- Deutschland
-
+49 (0)3449183314
+49 (0)3449123492 -
info@ambold-pressen.de
www.ambold-pressen.de
#1010-994 · Single Column Press - Hydraulic
TOX-Pressotechnik - PC 30.96 - - 1998 CE -
Technical details
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-173063 · Single Column Press - Hydraulic
DUNKES - HZ 40 (CE) - - 1997 - konventionell
Technical details
permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-173057 · Single Column Press - Hydraulic
NEFF - EP-S 40 (CE) - - 1996 - Siemens S 5
Technical details
permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-62047 · Single Column Press - Hydraulic
DUNKES - HD 10 - - 1993 -
Technical details
D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-143024 · Single Column Press - Hydraulic
MUELLER - CD 63.11.32 (UVV) - - 1993 - Siemens S 7
Technical details
year of manufacture1980 Modernization of control 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-233004 · Single Column Press - Hydraulic
DUNKES - HZ 6,3 (UVV) - - 1993 - konventionell
Technical details
permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-133037 · Single Column Press - Hydraulic
MUELLER - CD 100.11.30 (UVV) - - 1993 - konventionell
Technical details
year of manufacture 1979 overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request
- Ambold Pressen GmbH
- Sommeritzer Straße 43
- 04626 Schmölln
- Deutschland
-
+49 (0)3449183314
+49 (0)3449123492 -
info@ambold-pressen.de
www.ambold-pressen.de
#1010-985 · Single Column Press - Hydraulic
STENHOJ - 100 TE - - 1993 -
Technical details
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-495012 · Single Column Press - Hydraulic
DUNKES - HZS 75 - - 1992 -
Technical details
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-PE333 · Single Column Press - Hydraulic
Eisele - HPS 120 - - 1992 -
Technical details
Pneumatic
TOP Manufacturer:
BURGER - BERG & SCHMID - TOX - MEIER WERKE - REXROTH -