,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Hydroforming press

          Machinelist: Hydroforming press


          Hydroforming press

          used Presses Hydroforming press SCHULER SHP 35000-3150/2150


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143056 · Hydroforming press

          SCHULER - SHP 35000-3150/2150 - - 1998 -

          Technical details
          pressure 3500 t︱distance between columns mm︱stroke 900 mm︱Distance table / ram, stroke down 1000 mm︱distance table / ram, stroke up 1900 mm︱table surface area 3150 x 2150 mm︱ram surface 3150 x 2150 mm︱Total Weight of Tool max. 30,0 t︱Weight of Tool Top Part max. 20,0 t︱speed down 400 mm/s︱working speed 0,9 - 9,2 mm/s︱Hydraulic Operating Pressure 280 bar︱oil volume 5500 l︱rated current 760 A︱voltage 400 V︱frequency 50 Hz︱power requirement 425 kW︱weight 231,0 t︱Dimensions (WxDxH) m︱
          Hydroformpress / IHU-Press Total tool weight approx. 30 t upper tool weight approx. 20 t Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price stored in dismantled condition can only be offered in as is where is condition, WITHOUT putting into operation
            pressure 3500 t
            stroke 900 mm
            Distance table / ram, stroke dow. 1000 mm
            distance table / ram, stroke up 1900 mm
            table surface area 3150 x 2150 mm
            ram surface 3150 x 2150 mm
            Total Weight of Tool max. 30,0 t
            Weight of Tool Top Part max. 20,0 t
            speed down 400 mm/s
            working speed 0,9 - 9,2 mm/s
            Hydraulic Operating Pressure 280 bar
            oil volume 5500 l
            rated current 760 A
            voltage 400 V
            frequency 50 Hz
            power requirement 425 kW
            weight 231,0 t
            Description :
            Hydroformpress / IHU-Press
            Total tool weight approx. 30 t
            upper tool weight approx. 20 t

            Attention:
            This machine is a EU re-import!
            If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation
            This work is not part of the offered price
            stored in dismantled condition
            can only be offered in as is where is condition, WITHOUT putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydroforming press GEBR. HAU HE2S


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-050221 · Hydroforming press

          GEBR. HAU - HE2S - - 1975 -

          Technical details
          Total force (nominal) to︱Clamping surface (left-right) mm︱Clamping surface (front-back) mm︱
          2 hydraulic units

          Brpm9ejy32
          Standing oil container with a hydraulic pump immersed in it and a flanged motor as well as 2 control blocks each with connection hoses

          Hydraulic pump:
          Maximum pressure: 55 bar
          Speed: 1500 rpm

          Hydraulic oil content approx .: 100 l
            Description :
            2 hydraulic units



            Brpm9ejy32

            Standing oil container with a hydraulic pump immersed in it and a flanged motor as well as 2 control blocks each with connection hoses



            Hydraulic pump:

            Maximum pressure: 55 bar

            Speed: 1500 rpm



            Hydraulic oil content approx .: 100 l


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydroforming press


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-22882 · Hydroforming press

          - - - -

          Technical details
          Total force (nominal) to︱Clamping surface (left-right) mm︱Clamping surface (front-back) mm︱
          Hydraulic power pack, consisting of oil tank with it integrated drive motor with flange mounted hydraulic pump, as well as about the two valve blocks

          1 valve block make WANDFLUH hydraulic
          Max pressure: 160 bar
          Quantity: 20 l / min

          2. valve block make BOSCH
          Operating pressure: 319 bar
          Gruajvh

          Drive motor: 220/380 V, 1420 rpm, 2.2 kW
          Space: 700 x 620 mm x 1050 mm
          Weight incl. oil (approx. 90 l): 193 kg
            Description :
            Hydraulic power pack, consisting of oil tank with it integrated drive motor with flange mounted hydraulic pump, as well as about the two valve blocks



            1 valve block make WANDFLUH hydraulic

            Max pressure: 160 bar

            Quantity: 20 l / min



            2. valve block make BOSCH

            Operating pressure: 319 bar

            Gruajvh



            Drive motor: 220/380 V, 1420 rpm, 2.2 kW

            Space: 700 x 620 mm x 1050 mm

            Weight incl. oil (approx. 90 l): 193 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydroforming press ROEMHELD


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-140313 · Hydroforming press

          ROEMHELD - - - -

          Technical details
          Total force (nominal) to︱Clamping surface (left-right) mm︱Clamping surface (front-back) mm︱
          Maximum pressure: 250 bar
          Quantity: 1.6 m ³/min
          Ehrqgammi
          Electr. Supply: 380 V, 0.45 kW
          Space: 200 x 250 x 350 mm
            Description :
            Maximum pressure: 250 bar

            Quantity: 1.6 m ³/min

            Ehrqgammi

            Electr. Supply: 380 V, 0.45 kW

            Space: 200 x 250 x 350 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Hydroforming press DAIKIN T-V 38*A3ARX-95


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-W11218 · Hydroforming press

          DAIKIN - T-V 38*A3ARX-95 - - -

          Technical details
          Total force (nominal) to︱Clamping surface (left-right) mm︱Clamping surface (front-back) mm︱
          max. operating pressure: 210 bar
          drive motor: 380 V, 11/13.2 kW
          oil tank: 500 x 900 x 600 mm high
          oil tank capacity: 250 l
          space requirement: 1150 x 700 x 1070 mm high
          Vsmzdu
            Description :
            max. operating pressure: 210 bar

            drive motor: 380 V, 11/13.2 kW

            oil tank: 500 x 900 x 600 mm high

            oil tank capacity: 250 l

            space requirement: 1150 x 700 x 1070 mm high

            Vsmzdu


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used Presses Tryout Press - hydraulic PROFIPRESS 200T M/H-M/C2-1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00609 · Tryout Press - hydraulic

          PROFIPRESS - 200T M/H-M/C2-1500 - - neu / new -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • moveable pressure cylinder, • extended version, • additional manual pump, • CE,
            pressure 200 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • moveable pressure cylinder,
            • extended version,
            • additional manual pump,
            • CE,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160T M/H-M/C2 - 1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00611 · Tryout Press - hydraulic

          PROFIPRESS - 160T M/H-M/C2 - 1500 - - neu / new -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • movable cylinder, • extended version, • additionally with manual pump, • CE signed
            pressure 160 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • movable cylinder,
            • extended version,
            • additionally with manual pump,
            • CE signed


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30M/H-2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010023 · Tryout Press - hydraulic

          PROFIPRESS - 30M/H-2 - - neu -

          Technical details
          pressure 30 t︱stroke 400 mm︱table surface area 700 x 445 mm︱pressing speed 2,6 mm/sec︱feed speeds 9,9 mm/sec︱return speed 12,1 mm/sec︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 30 t
            stroke 400 mm
            table surface area 700 x 445 mm
            pressing speed 2,6 mm/sec
            feed speeds 9,9 mm/sec
            return speed 12,1 mm/sec
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 15H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00608 · Tryout Press - hydraulic

          PROFIPRESS - 15H - - neu -

          Technical details
          pressure 15 t︱stroke 150 mm︱table surface area 500 x 150 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 15 t
            stroke 150 mm
            table surface area 500 x 150 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00617 · Tryout Press - hydraulic

          PROFIPRESS - 30H - - neu -

          Technical details
          pressure 30 t︱stroke 220 mm︱table surface area 560 x 230 mm︱total power requirement / kW︱weight of the machine ca. 0,21 t︱dimensions of the machine ca. 1 x 0,7 x 2 m︱
          • Work shop press with manual pump
            pressure 30 t
            stroke 220 mm
            table surface area 560 x 230 mm
            total power requirement / kW
            weight of the machine ca. 0,21 t
            dimensions of the machine ca. 1 x 0,7 x 2 m
            Description :
            • Work shop press with manual pump


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160TON M/H-M/C 1


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00612 · Tryout Press - hydraulic

          PROFIPRESS - 160TON M/H-M/C 1 - - neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 920 x 560 mm︱feed down 4,8 mm/sec︱feed up 6,4 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,1 m︱
          • Pressure cylinder moveable • Reduction price by fixed cylinder: € 410,-, • Surcharge for 2 speeds: € 600,-
            pressure 160 t
            stroke 400 mm
            table surface area 920 x 560 mm
            feed down 4,8 mm/sec
            feed up 6,4 mm/sec
            total power requirement 4 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,7 x 0,9 x 2,1 m
            Description :
            • Pressure cylinder moveable
            • Reduction price by fixed cylinder: € 410,-,
            • Surcharge for 2 speeds: € 600,-


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic METALLKRAFT WPP 20 BK


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370020 · Tryout Press - hydraulic

          METALLKRAFT - WPP 20 BK - - NEU -

          Technical details
          pressure 20 t︱stroke 160 mm︱table surface area 690 x 950 x 180 mm︱weight of the machine ca. 210 kg︱dimensions of the machine ca. 1010 x 650 x 1750 mm︱
            pressure 20 t
            stroke 160 mm
            table surface area 690 x 950 x 180 mm
            weight of the machine ca. 210 kg
            dimensions of the machine ca. 1010 x 650 x 1750 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030195 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 30 - - Neu -

          Technical details
          30 to︱stroke 400 mm︱column daylight 740 mm︱ 300 mm︱total power requirement 2,2 kW︱weight of the machine ca. 600 kg︱dimensions 1200x800x2100 mm︱
          Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark
            30 to
            stroke 400 mm
            column daylight 740 mm
            300 mm
            total power requirement 2,2 kW
            weight of the machine ca. 600 kg
            dimensions 1200x800x2100 mm
            Description :
            Further information:
            stable welded construction
            Printing cylinder adjustable
            Operation electrically via shift lever / manually via hand lever
            Pressure display by manometer
            Height of material supports adjustable by cylinder
            CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 80


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030078 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 80 - - Neu -

          Technical details
          pressure 80 t︱stroke 400 mm︱column daylight 920 mm︱Frame Width 300 mm︱total power requirement 3,0 kW︱tank capacity 31 l︱ 5,4 mm/s︱ 8,3 mm/s︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1600x580x2550 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark
            pressure 80 t
            stroke 400 mm
            column daylight 920 mm
            Frame Width 300 mm
            total power requirement 3,0 kW
            tank capacity 31 l
            5,4 mm/s
            8,3 mm/s
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1600x580x2550 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via lever / manual over hand lever
            - Pressure gauge via pressure gauge
            - Material supports per cylinder in the height adjustable
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 100


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030075 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 100 - - Neu -

          Technical details
          pressure 100 t︱stroke 400 mm︱table surface area 920 x 560 mm︱dayligth 900 mm︱distance between columns 300 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. 1700 x 900 x 2500 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark
            pressure 100 t
            stroke 400 mm
            table surface area 920 x 560 mm
            dayligth 900 mm
            distance between columns 300 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1000 kg
            dimensions of the machine ca. 1700 x 900 x 2500 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material requirements - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 60 T / M-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370016 · Tryout Press - hydraulic

          RHTC - 60 T / M-2 - - NEU -

          Technical details
          pressure 60 t︱stroke 380 mm︱table surface area Arbeitsbreite 750 mm︱pressure 259 bar︱oil volume 38 dm³︱ajustment speed 2,87 mm/sec︱work speed 9,5 mm/sec︱return speed 12 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 540 kg︱
          Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.
            pressure 60 t
            stroke 380 mm
            table surface area Arbeitsbreite 750 mm
            pressure 259 bar
            oil volume 38 dm³
            ajustment speed 2,87 mm/sec
            work speed 9,5 mm/sec
            return speed 12 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 540 kg
            Description :
            Inner diameter of the cylinder [mm]: 170
            Piston rod diameter [mm]: 75
            Diameter piston crown [mm]: 100

            - Integrated pressure gauge
            - Pressure regulator
            - Hydraulic unit with 2 speeds
            - Working table adjustable in height
            - Joystick to move the piston up / down

            The 60 ton workshop press has a fixed cylinder and a
            height-adjustable work table (motorized). Equipped with
            Pressure regulation, manometer, 2 speeds and a joystick for the
            move the piston up and down. With this joystick you can use the piston precisely
            move, making this hydraulic press perfect for precision jobs
            suitable.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 100 T / M/H-M/C-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370017 · Tryout Press - hydraulic

          RHTC - 100 T / M/H-M/C-2 - - NEU -

          Technical details
          pressure 100 t︱stroke 380 mm︱table surface area Arbeitsbreite 1100 mm︱pressure 258 bar︱oil volume 46 dm³︱ajustment speed 7,54 mm/sec︱work speed 2,47 mm/sec︱return speed 9,06 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 970 kg︱
          Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.
            pressure 100 t
            stroke 380 mm
            table surface area Arbeitsbreite 1100 mm
            pressure 258 bar
            oil volume 46 dm³
            ajustment speed 7,54 mm/sec
            work speed 2,47 mm/sec
            return speed 9,06 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 970 kg
            Description :
            Inner diameter of the cylinder [mm]: 220
            Piston rod diameter [mm]: 90
            Diameter piston crown [mm]: 120

            - Movable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work

            The 100 ton hydraulic press is equipped with a movable cylinder (left-
            right) and a height-adjustable work table. Over and beyond
            it has a pressure regulation, 2 speeds, a joystick and
            a hand pump for precision pressing.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030079 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 120 - - Neu -

          Technical details
          pressure 120 t︱stroke 400 mm︱Frame Width 400 mm︱distance spindle /table max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1300 kg︱dimensions of the machine ca. 1620 x 900 x 2450 mm︱
            pressure 120 t
            stroke 400 mm
            Frame Width 400 mm
            distance spindle /table max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1300 kg
            dimensions of the machine ca. 1620 x 900 x 2450 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 200 ton M/H-M/C-2 D=1300


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370019 · Tryout Press - hydraulic

          RHTC - 200 ton M/H-M/C-2 D=1300 - - NEU -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area Arbeitsbreite 1300 mm︱pressure 243 bar︱oil volume 64 dm³︱ajustment speed 5,73 mm/sec︱work speed 1,84 mm/sec︱return speed 7,08 mm/sec︱total power requirement 3,0 kW︱weight of the machine ca. 1690 kg︱
          Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.
            pressure 200 t
            stroke 400 mm
            table surface area Arbeitsbreite 1300 mm
            pressure 243 bar
            oil volume 64 dm³
            ajustment speed 5,73 mm/sec
            work speed 1,84 mm/sec
            return speed 7,08 mm/sec
            total power requirement 3,0 kW
            weight of the machine ca. 1690 kg
            Description :
            Inner diameter of the cylinder [mm]: 320
            Piston rod diameter [mm]: 140
            Diameter piston crown [mm]: 175

            - adjustable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work
            - with digital display

            This 200 ton hydraulic press is equipped with a movable cylinder (left-
            right), a height-adjustable work table, a pressure regulator, 2
            speeds, a joystick and a hand pump for precision pressing
            fitted.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030139 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 160 - - Neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱Frame Width 350 mm︱column daylight 1.100 mm︱cylinder diameter 120 mm︱work height max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1.400 kg︱dimensions of the machine ca. 1800x1000x2550 mm︱
          Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark
            pressure 160 t
            stroke 400 mm
            Frame Width 350 mm
            column daylight 1.100 mm
            cylinder diameter 120 mm
            work height max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1.400 kg
            dimensions of the machine ca. 1800x1000x2550 mm
            Description :
            Accessories / equipment:
            - stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material supports adjustable in height by cylinder
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030140 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 200 - - NEU -

          Technical details
          pressure 200 t︱stroke 400 mm︱Frame Width 450 mm︱column daylight 1300 mm︱cylinder diameter 170 mm︱work height max. 900 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2600 kg︱dimensions of the machine ca. 2500x1100x2800 mm︱
          Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark
            pressure 200 t
            stroke 400 mm
            Frame Width 450 mm
            column daylight 1300 mm
            cylinder diameter 170 mm
            work height max. 900 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2600 kg
            dimensions of the machine ca. 2500x1100x2800 mm
            Description :
            Accessories / equipment:
            - stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material supports adjustable in height by cylinder
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 60


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030155 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 60 - - Neu -

          Technical details
          60 to︱stroke 400 mm︱column daylight 820 mm︱Frame Width 350 mm︱total power requirement 2,2 kW︱weight of the machine ca. 800 kg︱Overall size 1400x850x2400 mm︱
          Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark
            60 to
            stroke 400 mm
            column daylight 820 mm
            Frame Width 350 mm
            total power requirement 2,2 kW
            weight of the machine ca. 800 kg
            Overall size 1400x850x2400 mm
            Description :
            Further information:
            stable welded construction
            Printing cylinder adjustable
            Operation electrically via shift lever / manually via hand lever
            Pressure display by manometer
            Height of material supports adjustable by cylinder
            CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 30 man.


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030077 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 30 man. - - Neu -

          Technical details
          pressure 30 t︱stroke 170 mm︱column daylight 600 mm︱Frame Width 200 mm︱distance spindle /table max. 700 mm︱weight of the machine ca. 200 kg︱
          Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark
            pressure 30 t
            stroke 170 mm
            column daylight 600 mm
            Frame Width 200 mm
            distance spindle /table max. 700 mm
            weight of the machine ca. 200 kg
            Description :
            Domestic equipments:
            - Stable welded construction
            - manually via hand lever
            - Pressure gauge via pressure gauge
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 180


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030081 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 180 - - Neu -

          Technical details
          pressure 180 t︱stroke 400 mm︱column daylight 1500 mm︱Frame Width 550 mm︱distance spindle /table max. 1000 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2100 kg︱dimensions of the machine ca. 2300x1200x2850 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark
            pressure 180 t
            stroke 400 mm
            column daylight 1500 mm
            Frame Width 550 mm
            distance spindle /table max. 1000 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2100 kg
            dimensions of the machine ca. 2300x1200x2850 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via lever / manual over hand lever
            - Pressure gauge via pressure gauge
            - Material supports per cylinder in the height adjustable
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          DAIKIN - ROEMHELD - GEBR. HAU - - SCHULER -