Coiler

sheet width 250 mm︱coil weight 2,5 t︱coil internal dia. 450 - 530 mm︱sheet thickness - max. 4 mm︱coil outside dia. 1400 mm︱total power requirement kW︱weight of the machine ca. 1000 kg︱Overall size 1,95 x 1,95 x 1,7 mm︱

---

coil weight 2 x 0,15 t︱clamping range 265 - 485 mm︱band width 200 mm︱Thickness of sanding paper 0,1 - 4 mm︱total power requirement 0,25 kW︱weight of the machine ca. 180 kg︱dimensions of the machine ca. 1,2 x 0,9 x 1,2 m︱

---

- motorized double-turn coiler - newly painted

sheet width 300 mm︱coil weight 0,5 t︱coil internal dia. 480-530 mm︱coil outside dia. 1200 mm︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. BxTxH 1200x1200x1500 mm︱

---

material width 410 mm︱coil weight 2,0 t︱material thickness mm︱coil internal diameter 380 - 520 mm︱coil external diameter 1400 mm︱material cross-cut mm²︱no. of straightening rolls ︱straightening roll diameter mm︱number of draw-in rolls ︱roll diameter mm︱speed m/min︱power requirement kW︱weight of straightening machine 1,15 t︱dimensions straightener (WxDxH) 1,7 x 1,1 x 2,2 mm︱weight of decoiler 0,7 t︱dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm︱

---

Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device with infinitely variable drive, hydraulic threading device 235 D mit stufenlos regelbarem Antrieb material thickness up to approx. 6,0 mm roll diameter approx. 160 mm

sheet width 300 mm︱coil weight 1,5 t︱coil internal dia. 400 - 500 mm︱ je Arm 670 mm︱total power requirement kW︱weight of the machine ca. 760 kg︱dimensions of the machine ca. T 1,23 x B 1,7 x H 1,1 m︱

---

Coil weight 2 x 500 kg︱Material width 300 mm︱Coil exterior diameter 1200 mm︱Expansion range 350 - 610 mm︱Weight of machine approx. 2,2 t︱

---

sheet width 150 mm︱coil weight 80 kg︱coil external diameter 650 mm︱ 1000 mm︱ diameter of the mandrel 230 - 445 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

sheet width 300 mm︱coil weight 2x 500 kg︱coil internal dia. Ø 300-540 mm︱coil outside dia. Ø 1000 mm︱

---

sheet width mm︱coil weight t︱coil internal dia. mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

Load capacity approx .: 800 kg
largest ring outer Ø: 1000 mm
smallest inner ring Ø: 300 mm
Largest inner ring Ø adjustable by hand up to: 500 mm
B8xa0jqo
Material height up to: 450 mm

sheet width mm︱coil weight t︱coil internal dia. mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

carrying force: 2500 kg
tape width: 5 - 110 mm
tape exterior-Ø: Teller-Ø 1600 mm
engine: 4 kW
000rf9rq
space needed: 2300 x 2400 x 2050 mm
weight: ca. 2000 kg

sheet width 300 mm︱coil weight 1 t︱coil internal dia. 350-450 mm︱weight of the machine ca. 1 t︱dimensions of the machine ca. BxTxH 1500x1500x1800 mm︱

---

sheet width 300 mm︱coil weight 1 t︱coil internal dia. 350-450 mm︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. BxTxH 1500x1500x1800 mm︱

---

sheet width mm︱coil weight t︱coil internal dia. mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

Capacity (estimated) approx.: 1.5 t
Fork length: 1100 mm
Adjustable fork width: 470-750 mm
Max lifting height: 1000 mm
Uoci0
Suspension: 2 rollers on the support arms.
1 steering wheel under the lifting scaffold
Hydraulic drive: 380 V, 1,1 kW

sheet width mm︱coil weight t︱coil internal dia. mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

carrying force: ca. 50 kg
tape width: bis ca. 50 mm
tape exterior-Ø: 750 mm
engine: 400 V, 390 Upm, 0,25 kW
space needed: 850 x 600 x 1350 mm
weight: ca. 100 kg
2o2brj2rj

sheet width 620 mm︱coil weight - t︱coil internal dia. 280 mm︱coil external diameter 1720 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

sheet width 320 mm︱coil weight 1,5 t︱coil internal dia. mm︱coil outside dia. 1250 mm︱ diameter of the mandrel 370/430 mm︱Mandrel height 1000 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

sheet width 125 mm︱coil weight 2x 0,8 t︱coil internal dia. 300-500 mm︱coil outside dia. 1200 mm︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. BxTxH 2000x2000x1800 mm︱

---

Coil weight 2 x 2 t︱Material width 310 mm︱Coil exterior diameter 1300 mm︱Expansion range 380 - 460 mm︱Weight of machine approx. 2,5 t︱

---

pressure 70 t︱chamfer lenght 2600 mm︱distance between columns 2750 mm︱stroke 60 mm︱total power requirement kW︱weight of the machine ca. 4,3 t︱dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m︱

---

Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

pressure 185 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱throat 500 mm︱ 300 mm︱dayligth 500 mm︱work height max. 950 mm︱working feed 0-10 mm/sec︱return speed 140 mm/sec︱engine output 18,5 kW︱control DELEM DA-66T ︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 4000x2600x3400 mm︱

---

pressure 200 t︱chamfer lenght 3060 mm︱stroke 350 mm︱arm length 500 mm︱engine output 18,5 kW︱

---

pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱control CYBELEC VisiTouch ︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱

---

Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate

pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱throat 410 mm︱table width 60 mm︱table height 870 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 200 mm/sec︱return speed 160 mm/sec︱ 1000 mm︱ 160 mm︱engine output 15 kW︱quantity of oil 180 l︱Control CYBELEC VisiTouch 19-2D ︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 4100x1800x2700 mm︱

---

pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱

---