,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01245 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3000 - - 1997 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3100 mm︱back stop - adjustable 750 mm︱cutting angle adjustment 0,5 - 3,0 °︱no. of strokes 9 - 17 Hub/min︱table height over floor 775 mm︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m︱
          Accessories: electr. back stop, angle front stop, table extensions, spare knives
            sheet width 3050 mm
            plate thickness 6 mm
            distance between columns 3100 mm
            back stop - adjustable 750 mm
            cutting angle adjustment 0,5 - 3,0 °
            no. of strokes 9 - 17 Hub/min
            table height over floor 775 mm
            total power requirement 7,5 kW
            weight of the machine ca. 4,5 t
            dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m
            Description :
            Accessories: electr. back stop, angle front stop, table extensions,
            spare knives


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325333 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3000 - - 1993 - konv.

          Technical details
          sheet width 3050 mm︱plate thickness 6,0 mm︱cutting angle 0,5 - 3,0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable max. 750 mm︱Control konv. ︱engine output 10,0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325333
            sheet width 3050 mm
            plate thickness 6,0 mm
            cutting angle 0,5 - 3,0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable max. 750 mm
            Control konv.
            engine output 10,0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            Furnishing:
            - electro-hydraulic / slide-guided sheet metal shears
            - front control panel, left - easy to use
            - with electro-hydraulic cutting angle adjustment
            - with manual cutting gap adjustment, from the rear
            - electro-motorized back gauge 10-750 mm
            - with analogue position display + handwheel for fine adjustment
            - 1x extra long, robust side stop .. 3,000 mm
            - 1x extra long, robust support arm
            - 1x freely movable foot switch
            - front finger/encroachment protection
            - 2x EMERGENCY stop buttons at the front
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325333


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC XTS 3000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325328 · Plate Shear - Hydraulic

          ATLANTIC - XTS 3000 - - 1992 - SC7p

          Technical details
          sheet width 3050 mm︱plate thickness 6.0 mm︱cutting angle 0.5 - 3.0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable 750 mm︱Control SC7p ︱engine output 10.0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          ** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328
            sheet width 3050 mm
            plate thickness 6.0 mm
            cutting angle 0.5 - 3.0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable 750 mm
            Control SC7p
            engine output 10.0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            ** from a maintenance workshop
            ** well maintained condition - checked annually (!!)

            Furnishing:
            - electro-hydraulic sheet metal shears - "backdrop-guided"
            - ATLANTIC NC control unit - model "SC7p"
            * Target / actual information about the motorized back gauge
            * Manual positioning possible via handwheel
            * Digital display for backgauge position
            * electro-hydraulic cutting angle adjustment
            * Adjustable retraction from the back gauge before the start of the cut
            * Front left control unit
            - electro-motorized back gauge 10-750 mm
            - manual cutting gap adjustment, from the rear
            - 1x front side stop, with mm scale
            - 3x front support arms
            - 1x freely movable foot switch
            - Finger protection at the front
            - EMERGENCY stop button at the front
            - rear sheet metal slides
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC XTS 3000


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94161 · Plate Shear - Hydraulic

          ATLANTIC - XTS 3000 - - 1992 - SC7p

          Technical details
          sheet width 3050 mm︱plate thickness 6,00 mm︱cutting angle 0.5 - 3.0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable 750 mm︱Control SC7p ︱engine output 10.0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          ** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF)
            sheet width 3050 mm
            plate thickness 6,00 mm
            cutting angle 0.5 - 3.0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable 750 mm
            Control SC7p
            engine output 10.0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            ** from a maintenance workshop
            ** well maintained condition - checked annually (!!)

            Furnishing:
            - electro-hydraulic sheet metal shears - "backdrop-guided"
            - ATLANTIC NC control unit - model "SC7p"
            * Target / actual information about the motorized back gauge
            * Manual positioning possible via handwheel
            * Digital display for backgauge position
            * electro-hydraulic cutting angle adjustment
            * Adjustable retraction from the back gauge before the start of the cut
            * Front left control unit
            - electro-motorized back gauge 10-750 mm
            - manual cutting gap adjustment, from the rear
            - 1x front side stop, with mm scale
            - 3x front support arms
            - 1x freely movable foot switch
            - Finger protection at the front
            - EMERGENCY stop button at the front
            - rear sheet metal slides
            - User manual (PDF)



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3006


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92286 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3006 - - 1990 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3460 mm︱table height 800 mm︱0 220 bar︱cutting angle adjustment 0,5x3 °︱down holder 18 ︱back stop - adjustable 750 mm︱front stop - adjustable 1000 mm︱main drive 7,5 kW︱oil volume 300 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,7x2,0x1,8 m︱
          cutting angle adjustment manually blade gap adjustment manually angle stop
            sheet width 3050 mm
            plate thickness 6 mm
            distance between columns 3460 mm
            table height 800 mm
            0 220 bar
            cutting angle adjustment 0,5x3 °
            down holder 18
            back stop - adjustable 750 mm
            front stop - adjustable 1000 mm
            main drive 7,5 kW
            oil volume 300 l
            total power requirement 7,5 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,7x2,0x1,8 m
            Description :
            cutting angle adjustment manually
            blade gap adjustment manually
            angle stop


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3012


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01248 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3012 - - 1990 -

          Technical details
          sheet width 3050 mm︱plate thickness 12 mm︱distance between columns 3100 mm︱table height over floor 900 mm︱cutting angle adjustment 0,5 - 3 °︱no. of strokes 6 - 13 Hub/min︱back stop - adjustable 1000 mm︱down holder 18 St︱oil volume 350 l︱total power requirement 22,5 kW︱weight of the machine ca. 8 t︱dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m︱
          Accessories: electr. back gauge, spare knives
            sheet width 3050 mm
            plate thickness 12 mm
            distance between columns 3100 mm
            table height over floor 900 mm
            cutting angle adjustment 0,5 - 3 °
            no. of strokes 6 - 13 Hub/min
            back stop - adjustable 1000 mm
            down holder 18 St
            oil volume 350 l
            total power requirement 22,5 kW
            weight of the machine ca. 8 t
            dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m
            Description :
            Accessories: electr. back gauge, spare knives


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3012


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325234 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3012 - - 1987 -

          Technical details
          sheet width 3050 mm︱plate thickness 12,0 mm ST︱plate thickness 8,0 mm VA︱no. of strokes 7 - 14 Hub/min︱down holder 18 Stück︱cutting angle 0,5 - 3,0 °︱work height max. 930 mm︱back stop - adjustable 1000 mm︱Number of working hours 18.822 h︱total power requirement 22,5 kW︱weight 8.500 kg︱range L-W-H 4180 x 2030 x 2210 mm︱
          Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge * with analogue display * Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325234
            sheet width 3050 mm
            plate thickness 12,0 mm ST
            plate thickness 8,0 mm VA
            no. of strokes 7 - 14 Hub/min
            down holder 18 Stück
            cutting angle 0,5 - 3,0 °
            work height max. 930 mm
            back stop - adjustable 1000 mm
            Number of working hours 18.822 h
            total power requirement 22,5 kW
            weight 8.500 kg
            range L-W-H 4180 x 2030 x 2210 mm
            Description :
            Furnishing:
            - Robust hydraulic, link-guided guillotine shears
            - Electro-motor backgauge
            * with analogue display
            * Fine adjustment via hand wheel, front left
            - Control panel, front left
            - manual cutting gap adjustment, from behind
            - electro-hydraulic cutting angle adjustment
            - Front finger protection
            - Stable front support table
            - 1x side stop with T-slot and millimeter scale
            - 3x support arms
            - 1x free moving footswitch
            - User manual (PDF)

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325234


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Hydraulic Plate Shear from LagerMaschinen.de
          Hydraulic plate shear from LagerMaschinen - a good choice

          When purchasing a hydraulic plate shear it’s important to gauge the precision of the machine. Luckily LagerMaschinen's experts are well-versed in machine calibration and precision gears. The hydraulic plate shear used for slicing large boards among many different materials absolutely exacts precision for its various tasks. By purchasing your used machine namely a hydraulic plate shear from LagerMaschinen you ensure 100% quality as well as safety. LagerMaschinen's custom installation service will provide your staff with all needed information. Get started today!

          LagerMaschinen.de's hydraulic plate shear

          By buying your used hydraulic plate shear from LagerMaschinen.de you ensure not only a wiser financial decision for your small business but you also increase your professional network. Using the LagerMaschinen platform you can interact with sellers of every machine available including the hydraulic plate shear thereby obtaining their advice or guidance most often in your geographical area. Your hydraulic plate shear from LagerMaschinen is therefore not only an investment in your business but possibly an investment in your professional network.

          Hydraulic plate shear - built to last

          The hydraulic plate shear especially when bought used needs special care. By interacting with both LagerMaschinen.de's sellers and with LagerMaschinen experts themselves you gain knowledge as well as a new business contact along the way. Additionally take advantage of LagerMaschinens.de's delivery and installation service including a demonstration of your new - but used - machine. By purchasing your hydraulic plate shear through LagerMaschinen you'll simply add to the list of clients who love this service. Join today and start searching for the perfect machine.