Plate Shear - Hydraulic

sheet width 3100 mm︱plate thickness 12 mm︱distance between columns 3260 mm︱back stop - adjustable 3 - 1250 mm︱power capacity 37 kW︱voltage 400 V︱weight of the machine ca. ca. 14 t︱dimensions of the machine ca. 4,00 x 4,00 x 2,20 m︱

---

CNC-controlled plate shear www.kefischer.de

sheet width 3200 mm︱plate thickness 6,00 mm︱cutting angle 1° 30 °︱no. of strokes 14 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 13 Stück︱work height max. 800 mm︱Control "EASY-VIEW" ︱oil volume 270 l︱voltage 400 V︱engine output 7.5 kW︱weight 6100 kg︱range L-W-H 4010 x 1610 x 1620 mm︱

---

** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF)

sheet width 3200 mm︱plate thickness 0.5 - 6.0 mm︱cutting angle 1° 30 °︱no. of strokes 14 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 13 Stück︱work height max. 800 mm︱Control "EASY-VIEW" ︱oil volume 270 l︱voltage 400 V︱engine output 7.5 kW︱weight 6100 kg︱range L-W-H 4010 x 1610 x 1620 mm︱

---

** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325321

sheet width 3050 mm︱plate thickness 12,00 mm ST︱plate thickness 8,00 mm VA︱no. of strokes 7 - 14 Hub/min︱down holder 18 Stück︱cutting angle 0.5 - 3.0 °︱work height max. 930 mm︱back stop - adjustable 1000 mm︱Control SP 8 ︱total power requirement 22.5 kW︱weight 8500 kg︱range L-W-H 4180 x 2030 x 2210 mm︱

---

Furnishing: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 * Pre-selection positioning from the backgauge * Digital display of actual value * Electro-hydraulic cutting angle adjustment with digital display * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-motorized back gauge, on ball screws - manual cutting gap adjustment, adjustable from the rear - Finger protection at the front - 1x side stop .. 1.000 mm - Protective device behind the machine - rear sheet metal slide - 1x freely movable foot switch - User manual (PDF)

sheet width 3050 mm︱plate thickness 12.0 mm ST︱plate thickness 8.0 mm VA︱no. of strokes 7 - 14 Hub/min︱down holder 18 Stück︱cutting angle 0.5 - 3.0 °︱work height max. 930 mm︱back stop - adjustable 1000 mm︱Control SP 8 ︱total power requirement 22.5 kW︱weight 8500 kg︱range L-W-H 4180 x 2030 x 2210 mm︱

---

Furnishing: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 * Pre-selection positioning from the backgauge * Digital display of actual value * Electro-hydraulic cutting angle adjustment with digital display * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-motorized back gauge, on ball screws - manual cutting gap adjustment, adjustable from the rear - Finger protection at the front - 1x side stop .. 1.000 mm - Protective device behind the machine - rear sheet metal slide - 1x freely movable foot switch - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325332

sheet width 3050 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱

---

** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale

sheet width 3050 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱

---

** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292

sheet width 3060 mm︱plate thickness 8.0 mm︱thickness at "Niro-steel" 6.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱

---

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329

sheet width 3060 mm︱plate thickness 8,00 mm︱thickness at "Niro-steel" 6,00 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱

---

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration

sheet width 3000 mm︱plate thickness 10 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 9,8 t︱dimensions of the machine ca. 4,15 x 3,55 x 2 m︱

---

Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg

Knife length 3000 mm︱Plate thickness 10 mm︱Machine dimensions (lxwxh) 4.150 x 3.550 x 2.000 mm︱Machine weight 9.800 kg︱

---

sheet width 3060 mm︱plate thickness 8 mm︱rear stop 1000 mm︱weight of the machine ca. 7000 kg︱

---

Equipment/accessories: - Motorized cutting gap adjustment - Elgo control unit P 40 T (retrofitted in 2022) - New FI and rotary control for the backgauge installed in 2022 - Sheet metal holding device - Support extension

sheet width 4040 mm︱plate thickness 5,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 9,20 t︱dimensions of the machine ca. m︱

---

• Angle stop 1700 mm • Support arms according to photo • Backgauge controlled 1000 mm • pneumatic sheet metal holding device • automatic cutting gap adjustment • Small parts switch to the front • Control System 2005 • Rear safety light barrier Dimensions: L 4.8 x W 2.20 (plus support arms) x H 1.75 m

weight of the machine ca. 16 t︱sheet width 3150 mm︱sheet thickness - max. 16 mm︱sheet width - min. 1,6 mm︱voltage 400 V︱range - high tensile 3950x2475x2520 mm︱

---

sheet width 3050 mm︱plate thickness 6 mm︱operating pressure 280 bar︱weight 6500 kg︱

---

sheet width 3100 mm︱plate thickness 4 mm︱cutting angle 1° 30` °︱back stop - adjustable 750 mm︱weight of the machine ca. 3800 kg︱

---

sheet width 3060 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱

---

Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)

sheet width 3060 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱

---

Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)

sheet width 3100 mm︱plate thickness 3,00 mm︱distance between columns mm︱cutting angle 1-3 °︱no.of strokes 18 /min.︱total power requirement kW︱weight of the machine ca. 3,60 t︱dimensions of the machine ca. 3,70 x 2,00 x 1,55 m︱

---

Furnishing • Controlled backgauge 1000mm • SIMATIC OP7 controller • Finger protection • Angle stop 1000mm • Support arm • Manual cutting gap adjustment

sheet width 3000 mm︱plate thickness 10,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 10,00 t︱dimensions of the machine ca. 3,60 x 2,50 x 2,05 m︱

---

• Controlled back gauge 10 - 1000 mm • Angle stop 1600 mm • 3 additional support arms • Automatic cutting gap adjustment • Automatic cutting angle adjustment • Cutting edge lighting • Cutting length limit

sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3100 mm︱back stop - adjustable 750 mm︱cutting angle adjustment 0,5 - 3,0 °︱no. of strokes 9 - 17 Hub/min︱table height over floor 775 mm︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m︱

---

Accessories: electr. back stop, angle front stop, table extensions, spare knives

sheet width 3050 mm︱plate thickness 6 / 4 mm︱distance between columns 3200 mm︱cutting angle adjustment 30´- 2"30´ °︱strokes 25-8 p. min.︱back stop way ca. 600 mm︱throat - mm︱total power requirement 5,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 3,5 x 1,6 x 1,45 m︱Electric 380 Volt ︱Back gauge electric with counter in front 2 Geschwindigkeiten ︱Foot switch ︱Protective railing + photoelectric barrier ︱Pair of blades for change ︱Shadow line lighting ︱cutting angle adjustment ︱Squaring arm withh mm-scale 1300 mm︱Support arms 3 x 1300 mm︱Condition: ready for operation ︱

---

Hydraulic plate shears with cutting angle adjustment and back gauge with 2 speeds. Higher quality knives for stainless steel processing. The cutting performance refers to 380 N/mm² strength. The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².

sheet width 6000 mm︱plate thickness 6 mm︱distance between columns 610 mm︱Control Elgo 87 P2︱total power requirement 15 kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. m︱

---

sheet width 3050 mm︱plate thickness 6,35 mm︱thickness at "Niro-steel" 4,0 mm︱down holder 16 Stück︱table length 575 mm︱Control AMADA ︱cutting angle 40° - 2°20 °︱0 305 bar︱oil volume 100 ltr.︱total power requirement 5,5 kW︱weight of the machine ca. 6150 kg︱range L-W-H 3790 x 2090 x 1860 mm︱

---

** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks