,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake AMADA Astro 100 NT HDS-1030


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7037 · Hydr. pressbrake

          AMADA - Astro 100 NT HDS-1030 - - 2004 - AMADA AMNC II-PC

          Technical details
          pressure 100 t︱chamfer lenght 3000 mm︱distance between columns 2700 mm︱Control AMADA AMNC II-PC ︱throat 415 mm︱stroke 200 mm︱dayligth 500 mm︱adjustment of the rear stops 600 mm︱table width 60 mm︱number of controlled axis 7 ︱ajustment speed 200 mm/sec︱bending speed 20 mm/sec︱total power requirement 5,3 kW︱weight of the machine ca. 6,7 t︱dimensions of the machine ca. m︱
          Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper "Medium" and "Large" -Combi gripper (suction/gripping) for vertical loading -Device for vertical loading of up to 120 parts Technical data see PDF attachment. Operating hours: 73000 h Miscellaneous: -Installation briefing of the entire cell -Safety equipment according to CE: safety fences with electrically interlocked doors -Transformer for the entire cell -External software AP-100 and ASTRO-CAM -DELL PC -Wila punch clamping (New Standard Clamping I) incl. hydraulic unit -2.loading station for parts up to max. 500x500mm -Side stop for loading table, manually adjustable -2500mm floor travelling track for the ASTRO-MP 20 handling robot -CCD camera system for checking the position of the blank -Conveyor belt 4000x700mm, height 750mm for finished parts -Modification of the safety device - integration of the conveyor belt and glass Glass instead of fence on the front of the system -PC for external programming -4 x grippers: IG 0725, ZG 0725, IF 0725, TF 3025 Machine is in very good condition. The technical data has been compiled to the best of our knowledge, for which we cannot accept any liability.
            pressure 100 t
            chamfer lenght 3000 mm
            distance between columns 2700 mm
            Control AMADA AMNC II-PC
            throat 415 mm
            stroke 200 mm
            dayligth 500 mm
            adjustment of the rear stops 600 mm
            table width 60 mm
            number of controlled axis 7
            ajustment speed 200 mm/sec
            bending speed 20 mm/sec
            total power requirement 5,3 kW
            weight of the machine ca. 6,7 t
            Description :
            Includes:
            -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm
            -Status indicator light
            -5-axis backgauge with stop sensor system

            Folding robot: ASTRO-100 NT
            Includes:
            -Standard gripper
            -Reposition gripper on the upper press beam
            -Regripping support for large workpieces - pneumatically driven
            Technical data see PDF attachment.

            Handling robot: ASTRO-MP20
            Includes:
            -Loading table with spreading magnets
            -Vacuum gripper "Medium" and "Large"
            -Combi gripper (suction/gripping) for vertical loading
            -Device for vertical loading of up to 120 parts
            Technical data see PDF attachment.

            Operating hours: 73000 h

            Miscellaneous:
            -Installation briefing of the entire cell
            -Safety equipment according to CE: safety fences with electrically interlocked
            doors
            -Transformer for the entire cell
            -External software AP-100 and ASTRO-CAM
            -DELL PC
            -Wila punch clamping (New Standard Clamping I) incl. hydraulic unit
            -2.loading station for parts up to max. 500x500mm
            -Side stop for loading table, manually adjustable
            -2500mm floor travelling track for the ASTRO-MP 20 handling robot
            -CCD camera system for checking the position of the blank
            -Conveyor belt 4000x700mm, height 750mm for finished parts
            -Modification of the safety device - integration of the conveyor belt and glass
            Glass instead of fence on the front of the system
            -PC for external programming
            -4 x grippers: IG 0725, ZG 0725, IF 0725, TF 3025

            Machine is in very good condition.

            The technical data has been compiled to the best of our knowledge,
            for which we cannot accept any liability.




        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HÄMMERLE BM 200-3100


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6939 · Hydr. pressbrake

          HÄMMERLE - BM 200-3100 - - 1997 - Infinitron

          Technical details
          pressure 2000 kN︱chamfer lenght 3100 mm︱distance between columns 3240 mm︱Control Infinitron ︱ram stroke 400 mm︱work height max. 1104 mm︱throat 250 mm︱table width 160 mm︱pre-running speed 160 mm/s︱working feed 1-10 mm/sec︱return speed 160 mm/sec︱tank capacity 550 l︱total power requirement 28 kW︱weight of the machine ca. 16,6 t︱dimensions of the machine ca. 4,4x2,7x3,4 m︱
          CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide Current Video of the machine: https://youtu.be/kY_r29IbaQs
            pressure 2000 kN
            chamfer lenght 3100 mm
            distance between columns 3240 mm
            Control Infinitron
            ram stroke 400 mm
            work height max. 1104 mm
            throat 250 mm
            table width 160 mm
            pre-running speed 160 mm/s
            working feed 1-10 mm/sec
            return speed 160 mm/sec
            tank capacity 550 l
            total power requirement 28 kW
            weight of the machine ca. 16,6 t
            dimensions of the machine ca. 4,4x2,7x3,4 m
            Description :
            CNC control Infinitron
            Hydro cushion MHK 1-30
            Three-point die holder DH 1-30
            Stop system A2 with a travel range of 600 mm
            Adjustment of the stop slide along the stop bar by separate
            controlled Z-axes
            Sheet metal support system H 2
            Adjustment of the individual sheet metal support brackets through separately
            controlled W-axes
            Bracket SK 10 with lifting aid 0-45 ° with linear guide

            Current Video of the machine: https://youtu.be/kY_r29IbaQs


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.