,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          coil line

          Machinelist: coil line


          coil line

          used Sheet metal working / shaeres / bending coil line 1SCHLEICHER/GSW


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-531 · coil line

          1SCHLEICHER/GSW - - - unbekannt -

          Technical details
          material width 300 mm︱coil weight 3 t︱material thickness 2 - 4 mm︱
          CNC roll feed, Make GSW, Type WVE 400/160 - weight 50/80 kg Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW
            material width 300 mm
            coil weight 3 t
            material thickness 2 - 4 mm
            Description :
            CNC roll feed, Make GSW, Type WVE 400/160
            - weight 50/80 kg

            Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160
            - band width 300 mm
            - band thickness 2 – 4 mm
            - cross cut 1200 mm²
            - voltage 220/380 V 50 Hz
            - total power requirement 3,1 kW

            coiler with press roll, Make Schleicher, Type H-3
            - Coil weight 3 t
            - Band width 400 mm
            - voltage 220/380 V 50 Hz
            - total power requirement 3,92 kW



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line GSW SHR 5000 / VCRL 650


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103046 · coil line

          GSW - SHR 5000 / VCRL 650 - - 2000 - konventionell

          Technical details
          material width 600 mm︱coil weight 5,0 t︱material thickness - 5,0 mm︱coil internal diameter 360 - 660 mm︱coil external diameter 1500 mm︱no. of straightening rolls 9 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱material cross-cut 1600 mm²︱power requirement kW︱weight of feeeder-straightener 2,5 t︱weight of decoiler 1,5 t︱dimensions feeder-straightener (WxDxH) 1,7 x 1,7 x 2,6 mm︱dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm︱
          Feeder-straightening machine VCRL 650 (year of manufacture1994 / overhauled 2001) with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting Decoiler SHR 5000 (year of manufacture 2000) with hydraulic expansion, snubber roll
            material width 600 mm
            coil weight 5,0 t
            material thickness - 5,0 mm
            coil internal diameter 360 - 660 mm
            coil external diameter 1500 mm
            no. of straightening rolls 9
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            material cross-cut 1600 mm²
            weight of feeeder-straightener 2,5 t
            weight of decoiler 1,5 t
            dimensions feeder-straightener (. 1,7 x 1,7 x 2,6 mm
            dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm
            Description :
            Feeder-straightening machine VCRL 650
            (year of manufacture1994 / overhauled 2001)
            with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting
            Decoiler SHR 5000 (year of manufacture 2000)
            with hydraulic expansion, snubber roll


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 2352 B-FPS / SC 12-FQ


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083096 · coil line

          DREHER - 2352 B-FPS / SC 12-FQ - - 1997 - Siemens S 5

          Technical details
          material width 300 mm︱coil weight 2 x 1,25 t︱material thickness 0,4 - 1,2 mm︱coil internal diameter 320 - 420 mm︱coil external diameter 1300 mm︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱number of draw-in rolls 2 ︱roll diameter 30 mm︱speed 3 - 30 m/min︱feed length 0 - 9999,9 mm︱power requirement 3,0 + 2,5 kW︱weight of decoiler 0,7 t︱dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm︱weight of straightening machine 0,45 t︱dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm︱weight of the feeder 0,4 t︱dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm︱
          Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls
            material width 300 mm
            coil weight 2 x 1,25 t
            material thickness 0,4 - 1,2 mm
            coil internal diameter 320 - 420 mm
            coil external diameter 1300 mm
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            number of draw-in rolls 2
            roll diameter 30 mm
            speed 3 - 30 m/min
            feed length 0 - 9999,9 mm
            power requirement 3,0 + 2,5 kW
            weight of decoiler 0,7 t
            dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm
            weight of straightening machine 0,45 t
            dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm
            weight of the feeder 0,4 t
            dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm
            Description :
            Universal straightening machine SC 12-FQ
            with infinitely variable drive
            double decoiler 2352 B-FPS
            WITHOUT drive, with hydraulic expansion, pneumatic lag brake
            electronic roll feed WAV-RDS-2Z, modell 1082 B
            with AC-Servomotor, pneumatic intermediate lifting of the rolls


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line HENSEL BRMS 4/500/10  /  BSH 3-500  /


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-194014V · coil line

          HENSEL - BRMS 4/500/10 / BSH 3-500 / - - 1996 - konventionell

          Technical details
          material width 500 mm︱coil weight 2,5 t︱material thickness 0,2 - 3,0 mm︱coil internal diameter 480 - 530 mm︱coil external diameter 1300 mm︱material cross-cut 1000 mm²︱no. of straightening rolls 10 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱roll diameter 120 mm︱Material thickness feeder 0,2 - 5,0 mm︱material cross-cut feeder 1000 mm²︱roll diameter 100 mm︱speed 20 m/min︱power requirement 4,0 + 1,1 kW︱weight of straightening machine 2,3 t︱dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm︱weight of decoiler 0,95 t︱dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm︱weight feeder t︱
          Straightening machine HENSEL BRMS 4/500/10 with infinitely variable drive Decoiler HENSEL BSH 3-500 mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll Electronic roll feed HENSEL EVX 500 with hydraulic intermediate lifting of the rolls Material thickness of feeder approx. 0,2 - 5,0 mm with coil loop control via light guard
            material width 500 mm
            coil weight 2,5 t
            material thickness 0,2 - 3,0 mm
            coil internal diameter 480 - 530 mm
            coil external diameter 1300 mm
            material cross-cut 1000 mm²
            no. of straightening rolls 10
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            roll diameter 120 mm
            Material thickness feeder 0,2 - 5,0 mm
            material cross-cut feeder 1000 mm²
            roll diameter 100 mm
            speed 20 m/min
            power requirement 4,0 + 1,1 kW
            weight of straightening machine 2,3 t
            dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm
            weight of decoiler 0,95 t
            dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm
            Description :
            Straightening machine
            HENSEL BRMS 4/500/10
            with infinitely variable drive
            Decoiler
            HENSEL BSH 3-500
            mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll
            Electronic roll feed
            HENSEL EVX 500
            with hydraulic intermediate lifting of the rolls
            Material thickness of feeder approx. 0,2 - 5,0 mm
            with coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 AV-RA2 / 2370 B


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1740 · coil line

          DREHER - 1676 AV-RA2 / 2370 B - - 1995 -

          Technical details
          material width 200 mm︱coil weight 1,5 t︱material thickness 0,8 - 4,2 mm︱straightening roll diameter 80 mm︱Number of straightening rolls 7 Pcs.︱
          Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available
            material width 200 mm
            coil weight 1,5 t
            material thickness 0,8 - 4,2 mm
            straightening roll diameter 80 mm
            Number of straightening rolls 7 Pcs.
            Description :
            Coil turner 2370 B
            Load capacity 1.5 ton.
            Bandwidth 300 mm
            Coil inner diameter: 400 - 500 mm
            Arm length per arm: 670 mm
            Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm
            Weight: 760 kg.

            Straightener Dreher 1676 AV-RA2
            Material width: 200 mm
            Material thickness: 08 - 4.2 mm
            Number of straightening rollers: 7
            Number of pull rollers: 4
            Straightening rollers diameter: 80 mm

            Would be down by a running press
            Documents circuit diagrams, operating instructions etc. available


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line KOHLER / WEINGARTEN 50.650/9-7500.1 / WEP 65


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233027 · coil line

          KOHLER / WEINGARTEN - 50.650/9-7500.1 / WEP 65 - - 1995 - konventionell

          Technical details
          material width 650 mm︱coil weight 7,5 t︱material thickness 0,6 - 4,0 mm︱coil internal diameter 460 - 530 (630) mm︱coil external diameter 1300 mm︱material cross-cut 1300 mm²︱no. of straightening rolls 9 ︱straightening roll diameter 60 mm︱number of draw-in rolls ︱roll diameter mm︱speed 1 - 30 m/min︱power requirement 30,0 kW︱weight of straightening machine t︱dimensions straightener (WxDxH) mm︱weight of decoiler t︱dimensions decoiler (WxDxH) mm︱weight feeder t︱dimensions feeder (WxDxH) m︱
          Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard
            material width 650 mm
            coil weight 7,5 t
            material thickness 0,6 - 4,0 mm
            coil internal diameter 460 - 530 (630) mm
            coil external diameter 1300 mm
            material cross-cut 1300 mm²
            no. of straightening rolls 9
            straightening roll diameter 60 mm
            speed 1 - 30 m/min
            power requirement 30,0 kW
            Description :
            Straightening machine KOHLER 50.650/9
            with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette
            Decoiler KOHLER 7500.1
            with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table
            Servo roll feed WEINGARTEN WEP 65
            coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line NORMATIC DY 500 X3000


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163021A · coil line

          NORMATIC - DY 500 X3000 - - 1994 - konventionell

          Technical details
          material width 500 mm︱coil weight 3,0 t︱material thickness 0,2 - 2,5 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1400 mm︱no. of straightening rolls 9 ︱straightening roll diameter 40 mm︱number of inlet and outlet rolls 4 ︱material cross-cut 1200 mm²︱speed 1,5 - 30 m/min︱Power capacity kW︱dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m︱weight decoiler 1,1 t︱dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m︱weight straightener 3,0 t︱
          Straightening machine RYD 40 x 500 hydraulic inlet guide Decoiler DY 500 x 3000 with hydraulic expansion, hydraulic coil lifting device elektronic roll feed AESL 500-2,8 can be offered without or with putting into operation in given condition
            material width 500 mm
            coil weight 3,0 t
            material thickness 0,2 - 2,5 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1400 mm
            no. of straightening rolls 9
            straightening roll diameter 40 mm
            number of inlet and outlet rolls 4
            material cross-cut 1200 mm²
            speed 1,5 - 30 m/min
            dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m
            weight decoiler 1,1 t
            dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m
            weight straightener 3,0 t
            Description :
            Straightening machine RYD 40 x 500
            hydraulic inlet guide
            Decoiler DY 500 x 3000
            with hydraulic expansion, hydraulic coil lifting device
            elektronic roll feed AESL 500-2,8
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line AMTEC PBS 24/24


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729197 · coil line

          AMTEC - PBS 24/24 - - 1994 -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - total power consumption 30 kW︱ - mains voltage 500 V︱ - mains frequency 50 Hz︱
          Technical description : This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks. The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed. The effluence rate of the spray valves for top and bottom side can be adjusted individually. A heating device facilitates the processing with high viscosity lubricants. - Year of Manufacture: December 1994 - Max. Blank length: 1800mm - Max. Blank width: 2500mm - Medium emulsion, oil, grease
            - total power consumption 30 kW
            - mains voltage 500 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks.
            The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed.
            The effluence rate of the spray valves for top and bottom side can be adjusted individually.
            A heating device facilitates the processing with high viscosity lubricants.

            - Year of Manufacture: December 1994
            - Max. Blank length: 1800mm
            - Max. Blank width: 2500mm
            - Medium emulsion, oil, grease




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 E/RDS  /  2380 FM-FPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183063A · coil line

          DREHER - 1676 E/RDS / 2380 FM-FPS - - 1994 - konventionell

          Technical details
          material width 650 mm︱coil weight 3,5 t︱material thickness 0,8 - 3,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 80 mm︱number of inlet rolls 4 ︱coil internal diameter 460 - 530 mm︱coil external diameter 1400 mm︱weight straightener 1,0 t︱weight decoiler 0,9 t︱dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m︱dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m︱
          Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic
            material width 650 mm
            coil weight 3,5 t
            material thickness 0,8 - 3,0 mm
            no. of straightening rolls 7
            straightening roll diameter 80 mm
            number of inlet rolls 4
            coil internal diameter 460 - 530 mm
            coil external diameter 1400 mm
            weight straightener 1,0 t
            weight decoiler 0,9 t
            dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m
            dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m
            Description :
            Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4
            with infinitely variable drive
            Decoiler DREHER 2380 FM-FPS Modell 891/5
            motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll
            coil loop control Ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line TEAP AMDC150+RM


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15596 · coil line

          TEAP - AMDC150+RM - - 1993 -

          Technical details
          material width 350 mm︱coil weight 2x 1 t︱material thickness 3 mm︱coil internal dia. 480-530 mm︱coil outside dia. 1400 mm︱
            material width 350 mm
            coil weight 2x 1 t
            material thickness 3 mm
            coil internal dia. 480-530 mm
            coil outside dia. 1400 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DIMECO 1676 EV / 2382 FFPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133013 · coil line

          DIMECO - 1676 EV / 2382 FFPS - - 1990 - konventionell

          Technical details
          material width coil line 600 mm︱coil weight 2 x 3,5 t︱coil internal diameter 460 - 530 mm︱coil external diameter 1500 mm︱material thickness coil line 0,5 - 3,0 mm︱no. of straightening rolls 7 ︱no. of rolls at in- and outlet 4 ︱roll diameter 80 mm︱feed length 0 - 500 mm︱power requirement 10,0 kW︱weight 10,0 t︱dimensions of the coil line 8,8 x 4,0 x 2,55 m︱
          Straightening machine Dimeco, 1676 EV with inlet table andpre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden can only be offered without putting into operation - video at seller's site before dismantling available
            material width coil line 600 mm
            coil weight 2 x 3,5 t
            coil internal diameter 460 - 530 mm
            coil external diameter 1500 mm
            material thickness coil line 0,5 - 3,0 mm
            no. of straightening rolls 7
            no. of rolls at in- and outlet 4
            roll diameter 80 mm
            feed length 0 - 500 mm
            power requirement 10,0 kW
            weight 10,0 t
            dimensions of the coil line 8,8 x 4,0 x 2,55 m
            Description :
            Straightening machine Dimeco, 1676 EV
            with inlet table andpre-shaping roll, hydraulic loading bridge
            Double decoiler Dimeco 2382 FFPS
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device
            elektronic roll feed Microfeed
            kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden
            can only be offered without putting into operation - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHLEICHER


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03639 · coil line

          SCHLEICHER - - - -

          Technical details
          material width 1200 mm︱coil weight 10 t︱material thickness 8 mm︱internal diameter 500 mm︱coil outside dia. 1300 mm︱coil Schleicher ︱straightening device Schleicher ︱feed motor Schleicher ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            material width 1200 mm
            coil weight 10 t
            material thickness 8 mm
            internal diameter 500 mm
            coil outside dia. 1300 mm
            coil Schleicher
            straightening device Schleicher
            feed motor Schleicher


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHARF WESTFALIA


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739033 · coil line

          SCHARF WESTFALIA - - - -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 2050 mm︱ - rotation 360 °︱ - - rotation speed 1.3 /min︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱ - mains frequency 50 Hz︱
          Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 2050 mm
            - rotation 360 °
            - - rotation speed 1.3 /min
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            Blank Pallet Turnover Device / Blank Handlling (needs retrofit)




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021082 · Hydr. pressbrake

          BAYKAL - APHS 41200 - - NEU - DELEM DA 66T

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 160 mm/s︱ 10 mm/s︱return speed 110 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 14500 kg︱dimensions 4830 x 2240 x 2890 mm︱
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            160 mm/s
            10 mm/s
            return speed 110 mm/sec
            1000 mm
            160 mm
            machine weight ab. 14500 kg
            dimensions 4830 x 2240 x 2890 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 41240


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021083 · Hydr. pressbrake

          BAYKAL - APHS 41240 - - NEU - DELEM DA 66T

          Technical details
          pressure 240 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱ 410 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 100 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 16000 kg︱dimensions 4900 x 1550 x 2600 mm︱
            pressure 240 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            410 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 100 mm/sec
            1000 mm
            160 mm
            machine weight ab. 16000 kg
            dimensions 4900 x 1550 x 2600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021067 · Hydr. pressbrake

          BAYKAL - APHS 31120 - - NEU - DELEM DA 66T

          Technical details
          pressure 120 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 870 mm︱dayligth 540 mm︱piston stroke 260 mm︱ 160 mm/s︱ 10 mm/s︱return speed 130 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 9000 kg︱dimensions 3820 x 1800 x 2550 mm︱
            pressure 120 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 870 mm
            dayligth 540 mm
            piston stroke 260 mm
            160 mm/s
            10 mm/s
            return speed 130 mm/sec
            1000 mm
            160 mm
            machine weight ab. 9000 kg
            dimensions 3820 x 1800 x 2550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LAG GHT 185-3000


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020902 · Hydr. pressbrake

          LAG - GHT 185-3000 - - NEU - DELEM DA-66T

          Technical details
          pressure 185 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱throat 500 mm︱ 300 mm︱dayligth 500 mm︱work height max. 950 mm︱working feed 0-10 mm/sec︱return speed 140 mm/sec︱engine output 18,5 kW︱control DELEM DA-66T ︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 4000x2600x3400 mm︱
            pressure 185 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            throat 500 mm
            300 mm
            dayligth 500 mm
            work height max. 950 mm
            working feed 0-10 mm/sec
            return speed 140 mm/sec
            engine output 18,5 kW
            control DELEM DA-66T
            weight of the machine ca. 15000 kg
            dimensions of the machine ca. 4000x2600x3400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31300


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021080 · Hydr. pressbrake

          BAYKAL - APHS 31300 - - NEU - DELEM DA 66T

          Technical details
          pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱Control DELEM DA 66T ︱table width 90 mm︱table height over floor 880 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 130 mm/s︱ 10 mm/s︱return speed 120 mm/sec︱ 1000 mm︱ 160 mm︱machine weight ab. 15500 kg︱dimensions 3820 x 2890 x 3150 mm︱
            pressure 300 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            Control DELEM DA 66T
            table width 90 mm
            table height over floor 880 mm
            dayligth 530 mm
            piston stroke 260 mm
            130 mm/s
            10 mm/s
            return speed 120 mm/sec
            1000 mm
            160 mm
            machine weight ab. 15500 kg
            dimensions 3820 x 2890 x 3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 26090


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021065 · Hydr. pressbrake

          BAYKAL - APHS 26090 - - NEU - DELEM DA 66T

          Technical details
          pressure 90 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱Control DELEM DA 66T ︱table width 60 mm︱table height over floor 860 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 150 mm/s︱ 10 mm/s︱return speed 130 mm/s︱ 1000 mm︱machine weight ab. 7100 kg︱dimensions 3320 x 2220 x 2600 mm︱
            pressure 90 t
            chamfer lenght 2600 mm
            distance between columns 2050 mm
            Control DELEM DA 66T
            table width 60 mm
            table height over floor 860 mm
            dayligth 530 mm
            piston stroke 260 mm
            150 mm/s
            10 mm/s
            return speed 130 mm/s
            1000 mm
            machine weight ab. 7100 kg
            dimensions 3320 x 2220 x 2600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA GBP PLUS 30220


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020952 · Hydr. pressbrake

          FARINA - GBP PLUS 30220 - - Neu - CYBELEC VisiTouch 19 2D

          Technical details
          pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱
            pressure 220 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            Control CYBELEC VisiTouch 19 2D
            dayligth 525 mm
            stroke 275 mm
            feed down 150 mm/sec
            feed bending 0-10 mm/sec
            feed up 120 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 15.600 kg
            dimensions of the machine ca. 4250x2000x3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 30200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021135 · Hydr. pressbrake

          FARINA - BSA PLUS 30200 - - NEU -

          Technical details
          pressure 200 t︱chamfer lenght 3000 mm︱distance between columns mm︱throat mm︱distance between table / ram mm︱stroke mm︱feed down mm/sec︱feed bending mm/sec︱feed up mm/sec︱engine output kW︱weight of the machine ca. kg︱
            pressure 200 t
            chamfer lenght 3000 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021056 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU -

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 40320


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021137 · Hydr. pressbrake

          FARINA - BSA PLUS 40320 - - NEU -

          Technical details
          pressure 320 t︱chamfer lenght 4000 mm︱stroke 350 mm︱arm length 400 mm︱
            pressure 320 t
            chamfer lenght 4000 mm
            stroke 350 mm
            arm length 400 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021049 · Hydr. pressbrake

          BAYKAL - APHS 31160 - - NEU - CYBELEC VisiTouch 19-2D

          Technical details
          pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱throat 410 mm︱table width 60 mm︱table height 870 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 200 mm/sec︱return speed 160 mm/sec︱ 1000 mm︱ 160 mm︱engine output 15 kW︱quantity of oil 180 l︱Control CYBELEC VisiTouch 19-2D ︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 4100x1800x2700 mm︱
            pressure 160 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            throat 410 mm
            table width 60 mm
            table height 870 mm
            dayligth 530 mm
            piston stroke 260 mm
            200 mm/sec
            return speed 160 mm/sec
            1000 mm
            160 mm
            engine output 15 kW
            quantity of oil 180 l
            Control CYBELEC VisiTouch 19-2D
            weight of the machine ca. 10.000 kg
            dimensions of the machine ca. 4100x1800x2700 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •