Oil- Fog- Separator

Suction- Tube mm︱Oil- drain- Tube mm︱ ︱

---

LTA BASIC Line 01 COMPACT FILTRATION SYSTEM for cooling lubricant or oil mist - Direct attachment to machine possible - Infinitely variable blower (0 - 10V for 230V version) - Extraction capacity 1200 m3/h 706 cfm - Modularly expandable up to 7,200 m3/h - Low energy consumption thanks to pressure loss-free filter elements and energy-efficient blower - Several filtration stages - Electrostatic filtration principle - Separation efficiency up to 99 - RAL 7035 - Dimensions: (LxWxH): 800 x 625 x 610 mm - Weight: 100 KG Subject to changes and errors in the technical data and information as well as prior sale!

Suction- Tube mm︱Oil- drain- Tube mm︱ ︱

---

- Infinitely variable blower (0-10V for 230V version) - Modularly expandable up to 7,200 m3/h (4,238 cfm) (AC 3061/3062) - Low energy consumption thanks to pressure loss-free filter elements and energy-efficient fans - Several filtration stages for the separation of cooling lubricant mist - Electrosatic or mechanical filtration principle - Universal use for oil & emulsion mist - High-voltage generator pre-programmed with two voltage levels -> oil, emulsion - Direct attachment to machine possible - Opening direction of the service door on the right - Separation efficiency > 99% - Dimensions: (LxWxH): 1130x625x610 mm - Weight: 135 KG Changes and errors in the technical data and information and subject to prior sale!

Suction- Tube 200 mm︱Oil- drain- Tube - mm︱dimensions 900 x 500 x 550 mm︱

---

There are 6 used oil/emulsion mist separators available. Price is for one oil mist separator. 3 x DMG 101600 (dark gray), year of manufacture 2012, motor 0.75 kW, weight 75 kg, dimensions 787 x 490 x 580 mm 2 x DMG 101600 (white), year of manufacture 2012, air volume 600 m³/h, motor 0.5 kW, weight 75 kg, dimensions 900 x 500 x 550 mm 1 x IFS IFMC 1800, year of manufacture 2007, air flow 1800 m³/h, motor 0.75 kW, weight 800 x 495 x 580 mm

Suction- Tube mm︱Oil- drain- Tube mm︱ ︱

---

LTA AC3001 Oil mist extraction system as good as new - Infinitely variable blower (0-10V for 230V version) - Modularly expandable up to 7,200 m3/h (4,238 cfm) (AC 3061/3062) - Low energy consumption thanks to pressure-loss-free filter elements and energy-efficient blowers - Filtration stages for the separation of cooling lubricant mist - Electrosatic filtration principle - Use for oil and emulsion mist - High-voltage generator pre-programmed with two voltage levels - Oil and emulsion - Direct attachment to machine possible - Separation efficiency up to 99 - Dimensions: (LxWxH): 1130x625x610 mm - Weight: 135 KG Changes and errors in the technical data and information as well as prior sale reserved!

dimensions 1,70 x 0,80 x 1,30 m︱weight 200 kg︱volt 220 V︱connected load 0,95 kW︱

---

Suction- Tube . mm︱Oil- drain- Tube . mm︱dimensions . mm︱

---

The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us.

table diameter 800 mm︱table height 220 mm︱weight 430 kg︱

---

table diameter 500 mm︱weight of the machine ca. ca. 0,2 t︱table height / mm︱

---

centre height / mm︱

---

O. 600 mm Weight: 340 kg

table length 800 mm︱table width 800 mm︱table load / t︱

---

Make: Fibrotakt Type: 11.16.7.13.3.72.41.4.0360 Diameter: 800mm + FIBRO control cabinet + Heidenhain up-down counter Type: VRZ 166 + Peiseler hydraulic pump Type:26184 round table: Total length: about 1500mm Total width: approx. 900mm Total height: approx. 320mm Documents: circuit diagram

table diameter 1000 mm︱table load / t︱table height 200 mm︱weight 730 kg︱

---

centre height / mm︱weight 110 kg︱diameter 360 mm︱

---

centre height / mm︱weight 160 kg︱diameter 500 mm︱

---

centre height / mm︱weight 110 kg︱diameter 400 mm︱

---

table diameter 630 mm︱weight of the machine ca. ca, 0,35 t︱table height 220 mm︱

---

table diameter 700 mm︱table load ? t︱table height ? mm︱weight of the machine ca. 300 kg︱dimensions of the machine ca. ? m︱

---

table diameter 180 mm︱height 65 mm︱flange surface 180x180 mm︱drill hole spacing 154 mm︱drive compressed air 5-8 bar︱weight 8,5 kg︱year of construction 2008 - ︱

---

MADER rotary indexing unit size 6 Item No. 246840 Serial no. 8V 216186 RSE-K-6-4-R-P table Ø 180mm height 65mm flange surface 180x180mm drill hole spacing 154mm connection R 1/8" control electro-pneumatic drive compressed air 5-8bar weight 8.5kg unused in original packaging You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

table diameter 200 mm︱table load 85 kg︱table height 125 mm︱Control CNC 220 ︱total power requirement kW︱weight of the machine ca. 85 kg︱dimensions of the machine ca. 1,0x0,8x0,5 m︱

---

weight of the machine ca. 250 kg︱Clamping surface 86x22 cm︱height of the machine 27 cm︱Year of construction 2001 -︱

---

FIBRO NC rotary table 3-fold NC 2.01.0160.0.1.04.02 with 3x NC 2.01.0160.0.1.00.00 Weight 250kg Clamping surface 86x22cm Height 27cm drive shaft diameter 25mm dividing heads flange diameter 140mm spindle shafts diameter 24mm Year of construction 2001 used very good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

table diameter unbkt. mm︱table load unbkt. t︱table height unbtk. mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

table diameter 800 * 600 mm︱table load 0,25 t︱table height - mm︱total power requirement 3 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 1,1 x 0,8 x 0,8 m︱

---

centre height / mm︱total power requirement / kW︱weight of the machine ca. 450 kg︱

---

centre height / mm︱

---

O. 600 mm Weight: 340 kg

centre height / mm︱weight of the machine ca. 240 kg︱

---