,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Band saw

          Machinelist: Band saw


          Band saw

          used Saws Band saw PANHANS BSB 500


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5327 · Band saw

          PANHANS - BSB 500 - - neu -

          Technical details
          Wheel diameter 500 mm︱Cutting height 330 mm︱cutting width 480 mm︱Motor output 1,5 kW︱Table dimensions 495 x 670 mm︱Table tiltable 45 Grad︱
            Wheel diameter 500 mm
            Cutting height 330 mm
            cutting width 480 mm
            Motor output 1,5 kW
            Table dimensions 495 x 670 mm
            Table tiltable 45 Grad


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band saw PANHANS BSB 600


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6225 · Band saw

          PANHANS - BSB 600 - - neu -

          Technical details
          Wheel diameter 600 mm︱Cutting height 380 mm︱cutting width 570 mm︱Motor output 2,2 kW︱Table dimensions 810 x 590 mm︱table height 905 mm︱voltage 400 V / 50 Hz ︱range L-W-H 1120 x 750 x 2125 mm︱Weight 275 kg︱Dust suction hood 2 x 100 mm︱band speed 1550 m/min︱
            Wheel diameter 600 mm
            Cutting height 380 mm
            cutting width 570 mm
            Motor output 2,2 kW
            Table dimensions 810 x 590 mm
            table height 905 mm
            voltage 400 V / 50 Hz
            range L-W-H 1120 x 750 x 2125 mm
            Weight 275 kg
            Dust suction hood 2 x 100 mm
            band speed 1550 m/min


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Band saw PANHANS BSB 700


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6195 · Band saw

          PANHANS - BSB 700 - - neu -

          Technical details
          Wheel diameter 700 mm︱Cutting height 420 mm︱cutting width 680 mm︱Table dimensions 695 x 990 mm︱Table tiltable 45 Grad︱Dimensions (L/W/H) 1260x840x2270 mm︱machine weight ab. 400 kg︱band speed 1570 m/min︱
          Band saw machine Panhans BSB 700 - Machine stand in a shapely, modern, torsion-free double chamber welded steel construction - Upper and lower door secured by limit switches - upper and lower Panhans band saw blade guide APA II, size. 2- finely planed cast iron table - table top can be swiveled up to 45° - dynamic balanced band saw wheels with vulcanized rubber bandages - Stop ruler can be used to the left of the saw blade, stop profile can be folded over - Blade tension indicator - 1 saw blade 5140 x 25 x 0.7 mm, tooth width 9 mm - mechanical height adjustment of the saw blade guard by hand wheel with locking pinion - Rotary cam switch with star-delta start and emergency stop button Automatic motor brake with main switch and motor protection switch - Wheel diameter: 700mm - Tape speed: 1570 m/min - Voltage: 400 V / 50 Hz - Wheel speed: 715 rpm - Cutting height: 420 mm - Cutting width: 680 mm - Max blade length: 5140 mm - Table size: 990 x 695 mm - Table height: 920 mm - Extraction connection: 2 x 120 mm - Required space: 1260 x 840 x 2270 mm - Weight: 400kg (Technical information according to the manufacturer - without guarantee!)
            Wheel diameter 700 mm
            Cutting height 420 mm
            cutting width 680 mm
            Table dimensions 695 x 990 mm
            Table tiltable 45 Grad
            Dimensions (L/W/H) 1260x840x2270 mm
            machine weight ab. 400 kg
            band speed 1570 m/min
            Description :
            Band saw machine Panhans BSB 700

            - Machine stand in a shapely, modern, torsion-free double chamber
            welded steel construction

            - Upper and lower door secured by limit switches

            - upper and lower Panhans band saw blade guide APA II, size. 2- finely planed
            cast iron table

            - table top can be swiveled up to 45°

            - dynamic balanced band saw wheels with vulcanized rubber bandages

            - Stop ruler can be used to the left of the saw blade, stop profile can be
            folded over

            - Blade tension indicator

            - 1 saw blade 5140 x 25 x 0.7 mm, tooth width 9 mm

            - mechanical height adjustment of the saw blade guard by hand wheel with
            locking pinion

            - Rotary cam switch with star-delta start and emergency stop button
            Automatic motor brake with main switch and motor protection switch

            - Wheel diameter: 700mm

            - Tape speed: 1570 m/min

            - Voltage: 400 V / 50 Hz - Wheel speed: 715 rpm

            - Cutting height: 420 mm

            - Cutting width: 680 mm

            - Max blade length: 5140 mm

            - Table size: 990 x 695 mm

            - Table height: 920 mm

            - Extraction connection: 2 x 120 mm

            - Required space: 1260 x 840 x 2270 mm

            - Weight: 400kg


            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical panel saw

          used Saws Vertical panel saw HOLZ-HER 1205


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-20998 · Vertical panel saw

          HOLZ-HER - 1205 - - unbekannt -

          Technical details
          Cutting length 4300 mm︱Cutting height 1925 mm︱automatic nein ja/nein︱
            Cutting length 4300 mm
            Cutting height 1925 mm
            automatic nein ja/nein


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw ELCON Advance 215


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6777 · Vertical panel saw

          ELCON - Advance 215 - - Neu -

          Technical details
          Cutting length 5300 mm︱Cutting height 0-2.150, 80-2.050 mm︱automatic Option ja/nein︱
          ELCON precision panel saw type ADVANCE 215 Partnership Edition -------------------------------------- Technical description: Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm Cutting length: 5,300mm Cutting depth: 80mm (with clamps: 55mm) Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm. Motor: 5.5 kW, including automatic star-delta start Required air pressure: 6 bar Measurement reading for horizontal saw cuts: -over scale from 0 - 2,070mm -via strip cutting stop from 75 - 500mm Measurement reading for vertical saw cuts: -over scale from 0 - 1,300mm Extraction connection: 1 x 100mm 1 x 120mm Features: -ADVANCE clamping system, consisting of: 2 pneumatic clamps, those on vertical axes are motorized on a ball screw from above move down. The tongs carry plates weighing max. 150 kg - Torsion-free, free-standing machine frame -Round rod guide, vertical and horizontal -pneumatically yielding slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via hand wheel -Strip cutting stop -Manual programming rail with 5 sliding blocks -Pneumatic immersion of the saw unit -25 material support rolls -1 infeed and 1 outfeed roller -pneumatic workpiece clamping device between the support rollers -3 central support elements, folding out pneumatically -Pneumatic saw head locking -Control panel with document holder -Switch unit on the saw unit: start button, stop button -Tool cabinet -Lighting scale for vertical saw cuts Partnership Edition Features: -Digital display for the folding stop -Digital display for the saw unit with incremental function -pneumatically swiveling saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment and activation light -Cutting line laser -------------------------------------- Special price "Partnership Edition" ex works in this version: on request! -------------------------------------- Freight, installation and instruction costs (if the machine is not must be dismantled) - only applies within Germany. unloading and Lateral transport to the installation site is carried out by the customer. Price: EUR 2,750.00 plus statutory VAT -------------------------------------- Options with extra charge: Equipment package II - automatic feed: -Automatic feed with infinitely variable speed from 0-20m/min. -Adjustment of the traverse path to the workpiece size -Touch screen screen -Horizontal section positioning -automatic trimming process Price: EUR 14,990.00 plus statutory VAT Equipment package III (based on package II), consisting of: - Positioning and programmable folding stop - automatic interface positioning saw tree - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up 700mm, the saw tree moves to the interface 2) Price: EUR 9,590.00 plus statutory VAT Cutting length 4,300mm instead of 5,300mm Price: EUR 0.00 plus statutory VAT ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the plate: 225 kg Price: EUR 8,890.00 plus statutory VAT Additional workpiece clamping device Price: EUR 590.00 plus statutory VAT 3 pneumatically usable plate setting buffers with switches on the machine frame Price: EUR 990.00 plus statutory VAT GERONNIMO plate wagon Price: EUR 1,490.00 plus statutory VAT GERONNE terminal, including: cutting optimization, operating instructions, Spare parts list and charger (without machine connection) Price: EUR 590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 5300 mm
            Cutting height 0-2.150, 80-2.050 mm
            automatic Option ja/nein
            Description :
            ELCON precision panel saw type ADVANCE 215 Partnership Edition
            --------------------------------------
            Technical description:
            Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm
            Cutting length: 5,300mm
            Cutting depth: 80mm (with clamps: 55mm)
            Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth
            Saw blade rotation: 5,000 rpm.
            Motor: 5.5 kW, including automatic star-delta start
            Required air pressure: 6 bar
            Measurement reading for horizontal saw cuts:
            -over scale from 0 - 2,070mm
            -via strip cutting stop from 75 - 500mm
            Measurement reading for vertical saw cuts:
            -over scale from 0 - 1,300mm
            Extraction connection: 1 x 100mm 1 x 120mm

            Features:
            -ADVANCE clamping system, consisting of: 2 pneumatic clamps,
            those on vertical axes are motorized on a ball screw from above
            move down. The tongs carry plates weighing
            max. 150 kg
            - Torsion-free, free-standing machine frame
            -Round rod guide, vertical and horizontal
            -pneumatically yielding slatted frame
            -Finely adjustable folding stop with stop extension
            -Fine adjustment for horizontal saw cuts via hand wheel
            -Strip cutting stop
            -Manual programming rail with 5 sliding blocks
            -Pneumatic immersion of the saw unit
            -25 material support rolls
            -1 infeed and 1 outfeed roller
            -pneumatic workpiece clamping device between the support rollers
            -3 central support elements, folding out pneumatically
            -Pneumatic saw head locking
            -Control panel with document holder
            -Switch unit on the saw unit: start button, stop button
            -Tool cabinet
            -Lighting scale for vertical saw cuts

            Partnership Edition Features:
            -Digital display for the folding stop
            -Digital display for the saw unit with incremental function
            -pneumatically swiveling saw unit
            -Scoring system with controlled counter-air nozzle, numerical display for
            scoring
            or groove depth adjustment and activation light
            -Cutting line laser
            --------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            --------------------------------------
            Freight, installation and instruction costs (if the machine is not
            must be dismantled) - only applies within Germany. unloading and
            Lateral transport to the installation site is carried out by the customer.
            Price: EUR 2,750.00 plus statutory VAT
            --------------------------------------
            Options with extra charge:

            Equipment package II - automatic feed:
            -Automatic feed with infinitely variable speed from
            0-20m/min.
            -Adjustment of the traverse path to the workpiece size
            -Touch screen screen
            -Horizontal section positioning
            -automatic trimming process
            Price: EUR 14,990.00 plus statutory VAT

            Equipment package III (based on package II), consisting of:
            - Positioning and programmable folding stop
            - automatic interface positioning saw tree
            - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up
            700mm, the saw tree moves to the interface 2)
            Price: EUR 9,590.00 plus statutory VAT

            Cutting length 4,300mm instead of 5,300mm
            Price: EUR 0.00 plus statutory VAT

            ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the
            plate: 225
            kg
            Price: EUR 8,890.00 plus statutory VAT

            Additional workpiece clamping device
            Price: EUR 590.00 plus statutory VAT

            3 pneumatically usable plate setting buffers with switches on the machine frame
            Price: EUR 990.00 plus statutory VAT

            GERONNIMO plate wagon
            Price: EUR 1,490.00 plus statutory VAT

            GERONNE terminal, including: cutting optimization, operating instructions,
            Spare parts list and charger (without machine connection)
            Price: EUR 590.00 plus statutory VAT
            -----------------------------------------------------
            Technical information according to the manufacturer - without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw ELCON D 215 Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6769 · Vertical panel saw

          ELCON - D 215 Partnership Edition - - Neu -

          Technical details
          Cutting length 4300 mm︱Cutting height 2150 mm︱automatic ,
          ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----------------------------------------------------- Special price "Partnership Edition" ex works in this version: on request! ----------------------------------------------------- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----------------------------------------------------- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 4300 mm
            Cutting height 2150 mm
            automatic ,
            Description :
            ELCON precision panel saw type D 215
            -----------------------------------------------------
            Cutting height: vertical 2,150mm, horizontal 2,100mm
            Cutting length: 4,300mm
            -----------------------------------------------------
            Technical description:

            Cutting depth: max. 60mm
            Saw blade outlet behind the plate: max. 25mm
            Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth
            Saw blade rotation: 5,100 rpm.
            Motor: 4 kW (S 6)

            Measurement reading for:
            horizontal saw cuts: via scale and strip cutting stop
            vertical saw cuts: above scale
            Extraction nozzle: 100 & 80mm
            Required air pressure: 6 bar

            Features:
            -Material support with 1 roll per meter of cutting length, switched on and off
            by foot pedal
            suspendable
            -1 infeed and outfeed roller
            -pneumatically yielding slatted frame
            -Central support, 1 support element per meter of cutting length, individually
            manually
            fold out
            -Scoring system: double cut of the main saw blade
            - Torsion-free, free-standing machine frame
            -Two folding stops for vertical saw cuts (above and
            below the middle support)
            -----------------------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            -----------------------------------------------------

            plus pre-freight, freight, installation and instruction
            (if the machine does not have to be dismantled)
            Applies only within Germany.
            Unloading and cross transport to
            Installation location is determined by the customer.

            Price: EUR 1,900.00 plus statutory VAT
            -----------------------------------------------------
            Options with extra charge:

            Cutting length 5,300mm instead of 4,300mm
            Order number: ELCO0075/O049

            Surcharge: EUR 2,590.00 plus statutory VAT
            -----------------------------------------------------

            Technical information according to the manufacturer - without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw Elcon Multicut


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-20063 · Vertical panel saw

          Elcon - Multicut - - 2022 -

          Technical details
          Cutting length 5.300 mm︱Cutting height 2.100 mm︱automatic nein ja/nein︱
            Cutting length 5.300 mm
            Cutting height 2.100 mm
            automatic nein ja/nein


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw HOLZHER 1215 Super Cut


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-716138 · Vertical panel saw

          HOLZHER - 1215 Super Cut - - 1992 -

          Technical details
          Cutting length 2200 mm︱Cutting height 30 mm︱automatic nein ja/nein︱
            Cutting length 2200 mm
            Cutting height 30 mm
            automatic nein ja/nein


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          HOLZKRAFT / GEWEMA - PANHANS -