Tool for window production

System , ︱Number of tools 1 St.︱Bore 40 mm︱

---

System 78 IV︱Number of tools 14 St.︱Bore 50 mm︱

---

System , ︱Number of tools 1 St.︱Bore 40 mm︱

---

System 68,78,88 IV︱Number of tools 31 St.︱Bore 50 mm︱

---

System , ︱Number of tools 10 St.︱Bore 40 mm︱

---

System , ︱Number of tools 2 Stk.︱Bore 40 mm︱

---

System 78,92 IV︱Number of tools 11 St.︱Bore 50 mm︱

---

System 78,90 IV︱Number of tools 25 St.︱Bore 50 mm︱

---

System Kanefusa, Z4 ︱Number of tools variabel ︱Bore 40 mm︱

---

System 68/78/88 IV︱Number of tools - St.︱Bore 50 mm︱

---

Window tools Oppold IV 68/78/88 wood Window tools Oppold IV 68/78 wood-aluminium ran on Weinig Unicontrol6 with fixed strokes ---------------------------------- (Technical information according to the manufacturer - no guarantee!)

System 68 IV︱Number of tools 29 St.︱Bore 50 mm︱

---

Gold Window Tools IV68 ran on Weinig UC6

System 68/78 IV︱Number of tools 26 St.︱Bore 50 mm︱

---

Oertli window tools IV 68/78 wood IV 68/78 wood-aluminium been in use on Weinig Unicontrol 6 with CNC spindles You are welcome to receive the complete window sections and tool drawings Inquiry

Tenoning spindle 1 0︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus ︱

---

# 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)

Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus ︱

---

Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)

Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱Control CNC, Weinig PC-Nexus ︱

---

Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Window cuts on request! Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)

Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus ︱

---

#2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)

Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱

---

Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)

Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Südtron BT 20 ︱

---

Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)

Tenoning spindle 1 0︱Number of milling agregates 3 St.︱Spindle diameter 50 mm︱

---

Weinig Unicontrol 10-5, built in 1993 Slotted spindle 6 x 100 mm 2 profile spindles length 320 mm, stroke 95 mm Fitting spindle with folding device with return and discharge device Weinig Univar 10 with olive drilling rig, built in 1990 3 spindles each 320 mm long, stroke 95 mm + Fitting milling device Götzinger SFM, built in 2011 -------------------------------- Milling machine for the locking parts in the frame with 4 mm clearance + Drilling corner bearing Includes tools for Weinig Unicontrol: Zuani Tools IV 68/78/90 wood, 68/78 aluminum 4 mm clearance -------------------------------- For sale on behalf of the customer ex location Machines are currently still in use -------------------------------- (Technical information according to the manufacturer - no guarantee!)