,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Compressors

          Machinelist: Compressors


          Compressors

          used Workshop equipment Compressors Aircraft AIRPROFI 853/270/10 VKK


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7302 · Compressors

          Aircraft - AIRPROFI 853/270/10 VKK - - 2020 (NEU) -

          Technical details
          5,5 kW︱ 10 bar︱ - l︱ 850 l/min︱ 680 l/min︱container volume 270 l︱ 400 V︱ 1200 x 800 x 1970 mm︱ 204 kg︱
          Stationary piston compressor with refrigeration dryer, fine filter, Condensate conditioner for oil-water separation and automatic condensate drain
            5,5 kW
            10 bar
            - l
            850 l/min
            680 l/min
            container volume 270 l
            400 V
            1200 x 800 x 1970 mm
            204 kg
            Description :
            Stationary piston compressor with refrigeration dryer, fine filter,
            Condensate conditioner for oil-water separation and automatic condensate drain


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors CHICAGO PNEUMATIC CPVR15 + Lufttrockner + Kessel


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1893 · Compressors

          CHICAGO PNEUMATIC - CPVR15 + Lufttrockner + Kessel - - 2014 -

          Technical details
          power capacity 3 kW︱feed pressure 7 bar︱liter capacity / l︱weight 286 kg︱total power requirement / kW︱required space / m︱
            power capacity 3 kW
            feed pressure 7 bar
            liter capacity / l
            weight 286 kg
            total power requirement / kW
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors KAESER Schaltmodul


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06540 · Compressors

          KAESER - Schaltmodul - - 2014 - SAM 8/4

          Technical details
          serial number 2313 ︱control SAM 8/4 ︱rated current 0,7 - 0,35 A ︱frequency 60 Hz︱ 100-240 V
            serial number 2313
            control SAM 8/4
            rated current 0,7 - 0,35 A
            frequency 60 Hz
            100-240 V


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors COMPAIR Schraubenkompressor L 07 - 10A


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1050 · Compressors

          COMPAIR - Schraubenkompressor L 07 - 10A - - 2013 -

          Technical details
          Speed 3000 U/min.︱intake pressure 1,0 bar︱weight 205 kg︱total power requirement 7.5 kW︱
          Phase: 400V Volume rate of flow: 1,06m3 Stage pressures: 10 bar g Suction Pressures: 1,0 bar Full load curennt: 17A Speeds: 3000 U/min. Installed motor capacity: 7,5kW
            Speed 3000 U/min.
            intake pressure 1,0 bar
            weight 205 kg
            total power requirement 7.5 kW
            Description :
            Phase: 400V
            Volume rate of flow: 1,06m3
            Stage pressures: 10 bar g
            Suction Pressures: 1,0 bar
            Full load curennt: 17A
            Speeds: 3000 U/min.
            Installed motor capacity: 7,5kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors COMPAIR Schraubenkompressor L 80-7,5A


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S525 · Compressors

          COMPAIR - Schraubenkompressor L 80-7,5A - - 2009 -

          Technical details
          Speed / U/min.︱intake pressure / bar︱weight / kg︱total power requirement / kW︱
          1 screw compressor + refrigeration dryer + 2x compressed air tank Make: COMPAIR Type: LL80 7,5A Year: 2009 Serial no.: CD1000057200 Control Delcos 3100 Refrigerant dryer, Drypoint RA 500, 2 compressed air tanks, galvanised, capacity 3.000l - Load hours: 79.495
            Speed / U/min.
            intake pressure / bar
            weight / kg
            total power requirement / kW
            Description :
            1 screw compressor + refrigeration dryer + 2x compressed air tank

            Make: COMPAIR
            Type: LL80 7,5A
            Year: 2009
            Serial no.: CD1000057200
            Control Delcos 3100
            Refrigerant dryer, Drypoint RA 500, 2 compressed air tanks, galvanised,
            capacity 3.000l -

            Load hours: 79.495




        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors KAESER SK 18


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2061 · Compressors

          KAESER - SK 18 - - 1989 -

          Technical details
          11 KW︱
            11 KW


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN VCX 100/3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65404 · Compressors

          MICHELIN - VCX 100/3 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 250/350 L/min︱Receiver capacity 100l / 10bar l / bar︱weight of the machine ca. 67 kg.︱Number of cylinders 2 Stk.︱motor 230V / 2,2KW V / KW︱range L-W-H 940 x 430 x 950 mm︱
            feed pressure 8 bar
            Effective free air delivery 250/350 L/min
            Receiver capacity 100l / 10bar l / bar
            weight of the machine ca. 67 kg.
            Number of cylinders 2 Stk.
            motor 230V / 2,2KW V / KW
            range L-W-H 940 x 430 x 950 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN MBN 10


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65402 · Compressors

          MICHELIN - MBN 10 - - -Neu- -

          Technical details
          feed pressure 7 - 9 bar︱Effective free air delivery 230/130 l/min L/min︱Receiver capacity 10 l / bar︱weight of the machine ca. 25 kg.︱Number of cylinders 2 Stk.︱motor 230V / 1,4KW V / KW︱range L-W-H 600 x 310 x 510 mm︱
          Low-noise construction compressor 53 - 60dB
            feed pressure 7 - 9 bar
            Effective free air delivery 230/130 l/min L/min
            Receiver capacity 10 l / bar
            weight of the machine ca. 25 kg.
            Number of cylinders 2 Stk.
            motor 230V / 1,4KW V / KW
            range L-W-H 600 x 310 x 510 mm
            Description :
            Low-noise construction compressor
            53 - 60dB


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors DAEWOO DAAX 500 L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65418 · Compressors

          DAEWOO - DAAX 500 L - - -Neu- -

          Technical details
          Power 7,5 KW︱Receiver 500 L︱feed pressure 14 bar︱liter capacity 995 l︱connected load frequency 400 V︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 2,0 x 0,7 x ,125 m︱
            Power 7,5 KW
            Receiver 500 L
            feed pressure 14 bar
            liter capacity 995 l
            connected load frequency 400 V
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 2,0 x 0,7 x ,125 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HYUNDAI Super Silent 24


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65405 · Compressors

          HYUNDAI - Super Silent 24 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 125/85 L/min︱Receiver capacity 24 / 8 l / bar︱weight of the machine ca. 22,5 kg.︱Number of cylinders 2 Stk.︱motor 230V / 0,75KW V / KW︱range L-W-H 600 x 310 x 510 mm︱
          Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.
            feed pressure 8 bar
            Effective free air delivery 125/85 L/min
            Receiver capacity 24 / 8 l / bar
            weight of the machine ca. 22,5 kg.
            Number of cylinders 2 Stk.
            motor 230V / 0,75KW V / KW
            range L-W-H 600 x 310 x 510 mm
            Description :
            Exhibition machine!!
            This oil-free and compact Hyundai compressor has a low weight and super-quiet
            operation. Very quiet, about 53-60dB !! (Suitable for indoor use)
            Equipped with:
            ? safety valve.
            ? Pressure regulator with pressure gauge and coupling.
            ? Drain valve on the tank.
            ? Humidity separator.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN MVX 50/2


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65406 · Compressors

          MICHELIN - MVX 50/2 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 120/220 L/min︱Receiver capacity 50l / 10bar l / bar︱weight of the machine ca. 24 kg.︱Number of cylinders 1 Stk.︱motor 230V / 1,5KW V / KW︱range L-W-H 1,1 x 0,32 x 24 mm︱
          This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality.
            feed pressure 8 bar
            Effective free air delivery 120/220 L/min
            Receiver capacity 50l / 10bar l / bar
            weight of the machine ca. 24 kg.
            Number of cylinders 1 Stk.
            motor 230V / 1,5KW V / KW
            range L-W-H 1,1 x 0,32 x 24 mm
            Description :
            This compressor comes standard with:
            - Maintenance-free oil-free engine.
            - Safety valve.
            - Reduction valve with pressure gauge and coupling.
            - Drain cock on the tank.
            - Italian compressor of the highest quality.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors UWM 7.5/690/270  400V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65414 · Compressors

          UWM - 7.5/690/270 400V - - -Neu- -

          Technical details
          feed pressure 13 bar︱Effective free air delivery 690 L/min︱Receiver capacity 270l / 16bar l / bar︱weight of the machine ca. 199 kg.︱motor 400V / 5,5KW V / KW︱range L-W-H 1,7 x 0,6 x 1,27 mm︱
          It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379
            feed pressure 13 bar
            Effective free air delivery 690 L/min
            Receiver capacity 270l / 16bar l / bar
            weight of the machine ca. 199 kg.
            motor 400V / 5,5KW V / KW
            range L-W-H 1,7 x 0,6 x 1,27 mm
            Description :
            It is a high pressure version (especially for truck
            service or for heavy work).
            OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta
            circuit). Surcharge: EUR 379


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors UWM UWM 10/870/500


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65415 · Compressors

          UWM - UWM 10/870/500 - - -Neu- -

          Technical details
          Power 7,5 KW︱Receiver 500 L︱weight of the machine ca. 300 kg︱dimensions of the machine ca. 1,7x 0,6 x 1,45 m︱feed pressure 16 bar︱liter capacity 870 l︱
          The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V
            Power 7,5 KW
            Receiver 500 L
            weight of the machine ca. 300 kg
            dimensions of the machine ca. 1,7x 0,6 x 1,45 m
            feed pressure 16 bar
            liter capacity 870 l
            Description :
            The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump.
            Note that this is a high-pressure version (especially for
            trucks or places where higher pressure is required),
            Industry and hard work.
            The starting box is used to obtain a lower starting voltage (around
            to reduce peak voltages.
            The UWM 10/870/500 is available with 400 V


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors UWM 7.5/850/270


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65416 · Compressors

          UWM - 7.5/850/270 - - -Neu- -

          Technical details
          Power 7,5 KW︱Receiver 270 L︱weight of the machine ca. 180 Kg︱dimensions of the machine ca. 1700x600x1270 mm︱feed pressure 10 bar︱liter capacity 850 l/min︱connected load frequency 400 V︱
          The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages.
            Power 7,5 KW
            Receiver 270 L
            weight of the machine ca. 180 Kg
            dimensions of the machine ca. 1700x600x1270 mm
            feed pressure 10 bar
            liter capacity 850 l/min
            connected load frequency 400 V
            Description :
            The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable
            ideal for use at home, in the workshop, in industry
            and for heavy work.
            The starting box is used to obtain a lower starting voltage (around
            to reduce peak voltages.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HBM HBM 10


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65411 · Compressors

          HBM - HBM 10 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 85/120 L/min︱Receiver capacity 10 l / 8 bar l / bar︱weight of the machine ca. 21 kg.︱Number of cylinders 2 Stk.︱motor 230V / 0,75KW V / KW︱range L-W-H 465 x 3800 x 575 mm︱
          Mobile low-noise compressor 53 - 60 DB(A)
            feed pressure 8 bar
            Effective free air delivery 85/120 L/min
            Receiver capacity 10 l / 8 bar l / bar
            weight of the machine ca. 21 kg.
            Number of cylinders 2 Stk.
            motor 230V / 0,75KW V / KW
            range L-W-H 465 x 3800 x 575 mm
            Description :
            Mobile low-noise compressor
            53 - 60 DB(A)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN VCX 200/3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65408 · Compressors

          MICHELIN - VCX 200/3 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 250/350 L/min︱Receiver capacity 200l / 10bar l / bar︱weight of the machine ca. 105 kg.︱Number of cylinders 2 Stk.︱motor 230V / 2,2KW V / KW︱range L-W-H 1140 x 510 x 920 mm︱
            feed pressure 8 bar
            Effective free air delivery 250/350 L/min
            Receiver capacity 200l / 10bar l / bar
            weight of the machine ca. 105 kg.
            Number of cylinders 2 Stk.
            motor 230V / 2,2KW V / KW
            range L-W-H 1140 x 510 x 920 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HBM Dental 30


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65403 · Compressors

          HBM - Dental 30 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 120/85 L/min︱Receiver capacity 30 Liter︱weight of the machine ca. 50 kg.︱Number of cylinders 2 0︱motor 230V / 0,75KW V / KW︱range L-W-H 570 x 640 x 800 mm︱
          Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom.
            feed pressure 8 bar
            Effective free air delivery 120/85 L/min
            Receiver capacity 30 Liter
            weight of the machine ca. 50 kg.
            Number of cylinders 2 0
            motor 230V / 0,75KW V / KW
            range L-W-H 570 x 640 x 800 mm
            Description :
            Quiet professional 30 liter compressor
            Noise level approx. 40 - 45 DB (A)
            This compressor is delivered as standard with:
            Safety valve, pressure reducing valve, pressure gauge, coupling and
            Drain valve at the bottom.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HBM Dental 50


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65410 · Compressors

          HBM - Dental 50 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 200 / 175 L/min︱Receiver capacity 50 Liter︱weight of the machine ca. 77 kg.︱Number of cylinders 4 Stk.︱motor 230V / 1,5KW V / KW︱range L-W-H 580 x 780 x 820 mm︱
          Low-noise professional 50 liter compressor Noise level approx. 40 - 45 DB (A) This compressor comes standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at bottom.
            feed pressure 8 bar
            Effective free air delivery 200 / 175 L/min
            Receiver capacity 50 Liter
            weight of the machine ca. 77 kg.
            Number of cylinders 4 Stk.
            motor 230V / 1,5KW V / KW
            range L-W-H 580 x 780 x 820 mm
            Description :
            Low-noise professional 50 liter compressor
            Noise level approx. 40 - 45 DB (A)
            This compressor comes standard with:
            Safety valve, pressure reducing valve, pressure gauge, coupling and
            Drain valve at bottom.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN MBN 6


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65401 · Compressors

          MICHELIN - MBN 6 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 130 l/min L/min︱Receiver capacity 6 l / bar︱weight of the machine ca. 15 kg.︱Number of cylinders 2 Stk.︱motor 230V / 0,75KW V / KW︱range L-W-H mm︱
          Low-noise compressor with 78dB
            feed pressure 8 bar
            Effective free air delivery 130 l/min L/min
            Receiver capacity 6 l / bar
            weight of the machine ca. 15 kg.
            Number of cylinders 2 Stk.
            motor 230V / 0,75KW V / KW
            Description :
            Low-noise compressor with 78dB


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors BOGE - MATTEI - BEKO


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80467 · Compressors

          BOGE - MATTEI - BEKO - - - -

          Technical details
          1
          Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided.
            1
            Description :
            Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO.
            Upon request single parts can be offered.

            Detailed photos can be provided.


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors BATTENFELD DE 13


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z1023 · Compressors

          BATTENFELD - DE 13 - - -

          Technical details
          Power 5,5 KW︱Receiver 50 L︱weight of the machine ca. 0,450 t︱dimensions of the machine ca. . m︱feed pressure 330 bar︱liter capacity . l︱
            Power 5,5 KW
            Receiver 50 L
            weight of the machine ca. 0,450 t
            dimensions of the machine ca. . m
            feed pressure 330 bar
            liter capacity . l


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Tool trolleys

          used Workshop equipment Tool trolleys WMT WMT 7


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65312 · Tool trolleys

          WMT - WMT 7 - - -neu- -

          Technical details
          range L-W-H 620 x 330 x 700 mm︱weight 28,5 kg︱ 7 St.︱
          Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Complete with an integrated lock lockable tool trolley. Drawer dimensions: 530 x 310mm Drawer height: 5 x 40mm, 1 x 85mm, 1 x 170mm
            range L-W-H 620 x 330 x 700 mm
            weight 28,5 kg
            7 St.
            Description :
            Tool trolley with 7 drawers.
            Tool trolley has two normal and two
            swivel castors with brakes.
            Complete with an integrated lock
            lockable tool trolley.
            Drawer dimensions: 530 x 310mm
            Drawer height: 5 x 40mm, 1 x 85mm, 1 x 170mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Tool trolleys WMT WMT 117


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65336 · Tool trolleys

          WMT - WMT 117 - - -neu- -

          Technical details
          range L-W-H 1250 x 460 x 940 mm︱weight 88 kg︱ 9 St.︱
          Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x sturdy handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball-bearing guides. (Double bearing) All drawers can be opened 100%. Internal dimensions of the upper wide drawer 105 x 40 x 10 cm. Inner dimensions of the upper 6 narrow drawers 49 x 40 x 7 cm. Inner dimensions of the lower 2 narrow drawers 49 x 40 x 23.5 cm.
            range L-W-H 1250 x 460 x 940 mm
            weight 88 kg
            9 St.
            Description :
            Mobile tool trolley, scope of delivery:
            Workbench with wooden worktop
            2 x 125 mm. Heavy duty castors with brakes.
            2 x 125 mm. Heavy fixed roles.
            1 x sturdy handle made of solid steel.
            1 x central locking for all drawers.
            1 x 2 buttons.
            Very nice solid wood panel.
            Solid ball-bearing guides. (Double bearing)
            All drawers can be opened 100%.
            Internal dimensions of the upper wide drawer 105 x 40 x 10 cm.
            Inner dimensions of the upper 6 narrow drawers 49 x 40 x 7 cm.
            Inner dimensions of the lower 2 narrow drawers 49 x 40 x 23.5 cm.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Tool trolleys WMT WMT 117-T blau


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65340 · Tool trolleys

          WMT - WMT 117-T blau - - -neu- -

          Technical details
          range L-W-H 1250 x 535 x 845 mm︱weight 74 kg︱ 1 St.︱
          Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm
            range L-W-H 1250 x 535 x 845 mm
            weight 74 kg
            1 St.
            Description :
            Mobile tool trolley, scope of delivery:
            Workbench with wooden worktop
            2 x 125 mm. Heavy duty castors with brakes.
            2 x 125 mm. Heavy fixed roles.
            1 x robust handle made of solid steel.
            1 x central locking for all drawers.
            1 x 2 buttons.
            Very nice solid wood panel.
            Solid ball bearing guides. (Double bearing)
            The drawer can be opened 100%
            Dimensions of the drawer 108 x 410 x 14 cm.
            Load capacity of the drawer 30Kg.
            Dimensions of the doors 520 x 460mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •