,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Other Machines

          Machinelist: Other Machines


          Chain Hoist - Electric

          used Other Machines Chain Hoist - Electric ABUS GM2 - 500kg - 2-strängig


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-718005 · Chain Hoist - Electric

          ABUS - GM2 - 500kg - 2-strängig - - NEU -

          Technical details
          weight max. 0,5 t︱stroke 4000 mm︱
          Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.
            weight max. 0,5 t
            stroke 4000 mm
            Description :
            Use as a stationary chain hoist
            painted in color RAL 5017 traffic blue
            Load capacity 500 kg
            Hook path 4000 mm
            Place of operation indoor operation
            Calculation basis FEM 9.901
            Engine group 2m / M5
            Operating voltage 3~50Hz 400V
            Direct control type of control
            Degree of protection IP55
            Lifting, 2-stage (pole-switchable) 1 / 4 m/min
            Lifting power 0.09 / 0.35 kW
            Duty cycle 60% ED
            Circuits 360 c/h

            Standard equipment trolley electrics
            Solo trolley/hoist, ready-to-use, with
            power connector.

            Operation from the hallway using a pendant control
            The pendant control with 2-stage pushbuttons is attached to the chain hoist.
            Make: ABUS
            Length of control cable including pendant control: 3310 mm
            Control line calculation according to hook path

            overload protection
            Mechanical slip clutch as overload protection. The slip clutch is
            preset.
          Datasheet
          Request / Contact
          used Other Machines Chain Hoist - Electric UNICRAFT EKZT 501-1


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6194505 · Chain Hoist - Electric

          UNICRAFT - EKZT 501-1 - - NEU -

          Technical details
          weight max. 0,5 t︱stroke 3000 mm︱total power requirement 0,54 kW︱weight of the machine ca. 18,5 kg︱
            weight max. 0,5 t
            stroke 3000 mm
            total power requirement 0,54 kW
            weight of the machine ca. 18,5 kg
          Datasheet
          Request / Contact
          used Other Machines Chain Hoist - Electric ABUS GM4 - 1000kg - 2-strängig


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-718006 · Chain Hoist - Electric

          ABUS - GM4 - 1000kg - 2-strängig - - NEU -

          Technical details
          weight max. 1,0 t︱stroke 4000 mm︱
          Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.
            weight max. 1,0 t
            stroke 4000 mm
            Description :
            Use as a stationary chain hoist
            Chain hoist type GM 4 1000.5-2, 2 strands
            painted in color RAL 5017 traffic blue
            Load capacity 1 ton
            Hook path 4000 mm
            Place of operation indoor operation
            Calculation basis FEM 9.901
            Engine group 2m / M5
            Operating voltage 3~50Hz 400V
            Direct control type of control
            Degree of protection IP55
            Lifting, 2-stage (pole-changing) 1.3 / 5 m/min
            Lifting power 0.22 / 0.9 kW
            Duty cycle 60% ED
            Circuits 360 c/h

            Standard equipment trolley electrics
            Solo trolley/hoist, ready-to-use, with
            power connector.

            Operation from the hallway using a pendant control
            The pendant control with 2-stage pushbuttons is attached to the chain hoist.
            Make: ABUS
            Length of control cable including pendant control: 3310 mm
            Control line calculation according to hook path

            overload protection
            Mechanical slip clutch as overload protection. The slip clutch is
            preset.
          Datasheet
          Request / Contact
          used Other Machines Chain Hoist - Electric UNICRAFT EKZT 301-1


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6194503 · Chain Hoist - Electric

          UNICRAFT - EKZT 301-1 - - NEU -

          Technical details
          weight max. 0,3 t︱stroke 3000 mm︱total power requirement 0,41 kW︱weight of the machine ca. 14,3 kg︱
            weight max. 0,3 t
            stroke 3000 mm
            total power requirement 0,41 kW
            weight of the machine ca. 14,3 kg
          Datasheet
          Request / Contact
          used Other Machines Chain Hoist - Electric ABUS GM2 - 250kg - 1-strängig


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-718007 · Chain Hoist - Electric

          ABUS - GM2 - 250kg - 1-strängig - - NEU -

          Technical details
          weight max. 0,25 t︱stroke 4000 mm︱
          Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.
            weight max. 0,25 t
            stroke 4000 mm
            Description :
            Use as a stationary chain hoist
            painted in color RAL 5017 traffic blue
            Load capacity 250 kg
            Hook path 4000 mm
            Place of operation indoor operation
            Calculation basis FEM 9.901
            Engine group 2m / M5
            Operating voltage 3~50Hz 400V
            Direct control type of control
            Degree of protection IP55
            Lifting, 2-stage (pole-switchable) 2 / 8 m/min
            Lifting power 0.09 / 0.35 kW
            Duty cycle 60% ED
            Circuits 360 c/h

            Standard equipment trolley electrics
            Solo trolley/hoist, ready-to-use, with
            power connector.

            Operation from the hallway using a pendant control
            The pendant control with 2-stage pushbuttons is attached to the chain hoist.
            Make: ABUS
            Length of control line, including pendant control: 3060 mm
            Control line calculation according to hook path

            overload protection
            Mechanical slip clutch as overload protection. The slip clutch is
            preset.
          Datasheet
          Request / Contact

          Cleaning unit

          used Other Machines Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft
          Datasheet
          Request / Contact
          used Other Machines Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!
          Datasheet
          Request / Contact

          Container

          used Other Machines Container SANDERS Spänebehälter ANTHRAZITGRAU RA


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7237012 · Container

          SANDERS - Spänebehälter ANTHRAZITGRAU RA - - NEU -

          Technical details
          length 1900 mm︱width 810 mm︱height 860 mm︱internal dimension 1,5 x 0,74 x 0,78 m︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1,9 x 0,81 x 0,86 m︱
          For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l
            length 1900 mm
            width 810 mm
            height 860 mm
            internal dimension 1,5 x 0,74 x 0,78 m
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1,9 x 0,81 x 0,86 m
            Description :
            For collecting and disposing of bulk goods and industrial waste

            - Tipping container - forklift attachments for in-house storage of
            Bulk solids
            - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL
            7016 anthracite gray / special paint on request
            - Tilting device with base plates for swivel and fixed castors
            - Drainage device
            - Stable base frame with drive-in pockets
            - Favorable load center
            - Robust sheet steel construction with reinforced edges

            Container volume: approx. 600 l
          Datasheet
          Request / Contact

          fitter s bench

          used Other Machines fitter s bench SANDERS GRÜN RAL 6011


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7237002 · fitter s bench

          SANDERS - GRÜN RAL 6011 - - NEU -

          Technical details
          length 2000 mm︱width 700 mm︱work height max. 900 mm︱dimensions of the machine ca. 2,0 x 0,7 x 0,9 m︱weight 160 kg︱
            length 2000 mm
            width 700 mm
            work height max. 900 mm
            dimensions of the machine ca. 2,0 x 0,7 x 0,9 m
            weight 160 kg
          Datasheet
          Request / Contact
          used Other Machines fitter s bench SANDERS ANTHRAZITGRAU RAL 7016


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7237003 · fitter s bench

          SANDERS - ANTHRAZITGRAU RAL 7016 - - NEU -

          Technical details
          length 2000 mm︱width 700 mm︱work height max. 900 mm︱dimensions of the machine ca. 2,0 x 0,7 x 0,9 m︱weight 160 kg︱
          Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest standards Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Center open compartment Paintwork: RAL 5010 blue, RAL 6011 green RAL 7016 anthracite
            length 2000 mm
            width 700 mm
            work height max. 900 mm
            dimensions of the machine ca. 2,0 x 0,7 x 0,9 m
            weight 160 kg
            Description :
            Workbench - Made in Germany
            Industrial quality, particularly robust and durable design for the highest
            standards
            Expectations!

            Workbench top 45 mm thick made of high-quality multiplex beech
            3 drawers on the left
            Right 1 drawer with 1 large compartment
            Center open compartment

            Paintwork: RAL 5010 blue, RAL 6011 green RAL 7016 anthracite
          Datasheet
          Request / Contact
          used Other Machines fitter s bench SANDERS BLAU RAL 5010


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7237001 · fitter s bench

          SANDERS - BLAU RAL 5010 - - NEU -

          Technical details
          length 2000 mm︱width 700 mm︱work height max. 900 mm︱dimensions of the machine ca. 2,0 x 0,7 x 0,9 m︱
          Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Middle open compartment Painting: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite gray
            length 2000 mm
            width 700 mm
            work height max. 900 mm
            dimensions of the machine ca. 2,0 x 0,7 x 0,9 m
            Description :
            Workbench - Made in Germany
            Industrial quality, particularly robust and durable design for the highest
            Expectations!

            Workbench top 45 mm thick made of high-quality multiplex beech
            3 drawers on the left
            Right 1 drawer with 1 large compartment
            Middle open compartment

            Painting: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite gray
          Datasheet
          Request / Contact

          Fork Lift Truck

          used Other Machines Fork Lift Truck YALE GLP 20 AF / GAS


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3540040 · Fork Lift Truck

          YALE - GLP 20 AF / GAS - - 2003 -

          Technical details
          weight max. in kg 2000 kg︱stroke 3830 mm︱fork length 1200 mm︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. H2425 mm︱
          Load center 500 mm Mast Simplex mast trailer hitch Rubber-mounted steering axle 4-fold super elastic tires
            weight max. in kg 2000 kg
            stroke 3830 mm
            fork length 1200 mm
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. H2425 mm
            Description :
            Load center 500 mm
            Mast Simplex mast
            trailer hitch
            Rubber-mounted steering axle
            4-fold super elastic tires
          Datasheet
          Request / Contact

          Heavy Goods Trailer

          used Other Machines Heavy Goods Trailer AWI PAAV 16t 6000 x 2500mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2540033 · Heavy Goods Trailer

          AWI - PAAV 16t 6000 x 2500mm - - 2022 (NEU) -

          Technical details
          16000 kg︱length 6000 mm︱width 2500 mm︱loading area height 700 mm︱
          Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.
            16000 kg
            length 6000 mm
            width 2500 mm
            loading area height 700 mm
            Description :
            Heavy-duty trailer - industrial trailer - Made in Germany

            - Available immediately from stock

            Frame:
            - Frame made of stable profile steel
            - Platform made of impregnated softwood
            - Protected all around with a steel edge, statically designed
            - 6 lashing rings welded on

            Steering:
            - The steering takes place via 2 axles with Ackermann steering
            - the steering drawbar is removable and can be hooked in on both sides
            - Steering angle approx. 42°
            - all rotating parts are with maintenance-free slide bearings (lubricated for
            life)
            Equipped with ball bearings
            - Towing eye: 40 mm Ø with wear ring
            - Fork support height adjustment for better coupling to the towing vehicle

            Wheels
            - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering
            Ø425mm, total width 300mm and ball bearings.
          Datasheet
          Request / Contact
          used Other Machines Heavy Goods Trailer AWI PAAV 10t 6000x200mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2540032 · Heavy Goods Trailer

          AWI - PAAV 10t 6000x200mm - - 2022 (NEU) -

          Technical details
          10000 kg︱length 6000 mm︱width 2000 mm︱loading area height 650 mm︱
          Heavy-duty trailers - industrial trailers, available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.
            10000 kg
            length 6000 mm
            width 2000 mm
            loading area height 650 mm
            Description :
            Heavy-duty trailers - industrial trailers, available immediately from stock

            Frame:
            - Frame made of stable profile steel
            - Platform made of impregnated softwood
            - Protected all around with a steel edge, statically designed
            - 6 lashing rings welded on

            Steering:
            - The steering takes place via 2 axles with Ackermann steering
            - the steering drawbar is removable and can be hooked in on both sides
            - Steering angle approx. 42°
            - all rotating parts are with maintenance-free slide bearings (lubricated for
            life)
            Equipped with ball bearings
            - Towing eye: 40 mm Ø with wear ring
            - Fork support height adjustment for better coupling to the towing vehicle

            Wheels
            - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering
            Ø415mm, total width 200mm and ball bearings.
          Datasheet
          Request / Contact

          Lift table

          used Other Machines Lift table UNICRAFT SHT 1001 G


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6153100 · Lift table

          UNICRAFT - SHT 1001 G - - NEU -

          Technical details
          table length 1450 mm︱table width 1140 mm︱stroke height 82 / 760 mm︱weight max. in kg 1000 kg︱total power requirement 0,75 kW︱weight of the machine ca. 250 kg︱
            table length 1450 mm
            table width 1140 mm
            stroke height 82 / 760 mm
            weight max. in kg 1000 kg
            total power requirement 0,75 kW
            weight of the machine ca. 250 kg
          Datasheet
          Request / Contact
          used Other Machines Lift table UNICRAFT SHT 1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-945461 · Lift table

          UNICRAFT - SHT 1000 - - NEU -

          Technical details
          table length 1300 mm︱table width 800 mm︱stroke height 190 / 1010 mm︱weight max. in kg 1000 kg︱total power requirement 0,75 kW︱weight of the machine ca. 220 kg︱
            table length 1300 mm
            table width 800 mm
            stroke height 190 / 1010 mm
            weight max. in kg 1000 kg
            total power requirement 0,75 kW
            weight of the machine ca. 220 kg
          Datasheet
          Request / Contact
          used Other Machines Lift table UNICRAFT FHT 500


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6150500 · Lift table

          UNICRAFT - FHT 500 - - NEU -

          Technical details
          table length 855 mm︱table width 500 mm︱stroke height 340 / 900 mm︱weight max. in kg 500 kg︱weight of the machine ca. 87 kg︱
          Sanders-Artnr. 10061751
            table length 855 mm
            table width 500 mm
            stroke height 340 / 900 mm
            weight max. in kg 500 kg
            weight of the machine ca. 87 kg
            Description :
            Sanders-Artnr. 10061751
          Datasheet
          Request / Contact
          used Other Machines Lift table UNICRAFT SHT 2000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-9454615 · Lift table

          UNICRAFT - SHT 2000 - - NEU -

          Technical details
          table length 1300 mm︱table width 800 mm︱stroke height 190 / 1010 mm︱weight max. in kg 2000 kg︱total power requirement 0,75 kW︱weight of the machine ca. 280 kg︱
          Item no.: 6154200 / S94546154200 - Hydraulic compact scissor lift table - For ergonomic work at the optimum working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Infinitely variable lifting and lowering - Sturdy powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Fulfills the safety criteria of EN 1570 - High-pressure cylinder with double safety function
            table length 1300 mm
            table width 800 mm
            stroke height 190 / 1010 mm
            weight max. in kg 2000 kg
            total power requirement 0,75 kW
            weight of the machine ca. 280 kg
            Description :
            Item no.: 6154200 / S94546154200
            - Hydraulic compact scissor lift table
            - For ergonomic work at the optimum working height
            - With closed platform
            - Separate control unit with 3 meter cable, control buttons and emergency stop
            switch
            - Infinitely variable lifting and lowering
            - Sturdy powder-coated steel construction
            - Guaranteed stability
            - Circumferential safety strips
            - Fulfills the safety criteria of EN 1570
            - High-pressure cylinder with double safety function
          Datasheet
          Request / Contact

          Lift truck - electric

          used Other Machines Lift truck - electric SCHEFER EHW 18 Semi ECO


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3540044 · Lift truck - electric

          SCHEFER - EHW 18 Semi ECO - - 2022 -

          Technical details
          weight max. in kg 1800 kg︱fork length 1150 mm︱stroke height 90 - 205 mm︱
            weight max. in kg 1800 kg
            fork length 1150 mm
            stroke height 90 - 205 mm
            Description :

          Datasheet
          Request / Contact

          Sandblasting Machine

          used Other Machines Sandblasting Machine UNICRAFT SSK 3.1


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2500018 · Sandblasting Machine

          UNICRAFT - SSK 3.1 - - NEU -

          Technical details
          through-put width 580 mm︱working heigth 580 mm︱air consumption 400 - 800 l/min︱working pressure 3,4 - 8,0 bar︱suction capacity 17,4 m³/h︱total power requirement 1,2 kW︱weight of the machine ca. 115 kg︱dimensions of the machine ca. 1225 x 935 x 1640 mm︱
          - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collecting container - With compressed air connection on the outside - Glass bead abrasives, corundum abrasives, silicon carbide, plastic Blasting media, etc. can be used Equipment details: - Very large, upward-opening front flap with gas pressure springs for quick access and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without finger trigger - Air flow is controlled via Foot pedal - Four fluorescent tubes (230 volts), in a separate housing with protective screen and exchangeable protective film, including five replacement films - 2 separate switches for suction and cabin lighting - Regulation of the working pressure via pressure regulator with manometer - Cross struts on the feet allow easy transport with the pallet truck
            through-put width 580 mm
            working heigth 580 mm
            air consumption 400 - 800 l/min
            working pressure 3,4 - 8,0 bar
            suction capacity 17,4 m³/h
            total power requirement 1,2 kW
            weight of the machine ca. 115 kg
            dimensions of the machine ca. 1225 x 935 x 1640 mm
            Description :
            - Suitable for various blasting materials, e.g. quartz, glass ball,
            Plastic ball, etc.
            - Ideal for cleaning, derusting or removing paint from all metal parts
            Type, e.g. engine parts, fittings, signs, housings, rims, hinges
            - High-quality latex work gloves are firmly attached to the housing
            - Optimal visibility and occupational safety when machining workpieces because
            of the
            Window with glued protective film
            - Dust-free work due to all-round seals on the cover and door frames
            - Stable storage grid enables workpieces to be placed in the cabin interior
            - With drain opening for changing the blasting material
            - Suction pipe for the blasting material attached to the bottom of the
            collecting container
            - With compressed air connection on the outside
            - Glass bead abrasives, corundum abrasives, silicon carbide, plastic
            Blasting media, etc. can be used

            Equipment details:
            - Very large, upward-opening front flap with gas pressure springs for quick
            access
            and easy loading and unloading
            - Integrated suction system with exchangeable air filter
            - Jet gun without finger trigger - Air flow is controlled via
            Foot pedal
            - Four fluorescent tubes (230 volts), in a separate housing with protective
            screen and
            exchangeable protective film, including five replacement films
            - 2 separate switches for suction and cabin lighting
            - Regulation of the working pressure via pressure regulator with manometer
            - Cross struts on the feet allow easy transport with the pallet truck
          Datasheet
          Request / Contact

          Suction

          used Other Machines Suction TEKA Cartmaster


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2810012 · Suction

          TEKA - Cartmaster - - NEU -

          Technical details
          1860 m³/h︱ Pressung 2.900 Pa︱ 1,1 kW︱filter surface area 10 m²︱ 72 dB(A)︱ 400/50 V/Hz︱ 665 x 1100 x 1495 mm︱ 200 kg︱
          - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media --------------------------------------- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ------------------------ The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.
            1860 m³/h
            Pressung 2.900 Pa
            1,1 kW
            filter surface area 10 m²
            72 dB(A)
            400/50 V/Hz
            665 x 1100 x 1495 mm
            200 kg
            Description :
            - Hose arm 3 m, joints inside
            - Filter cartridge: dust class M
            - Pre-filter: baffle plate
            - Current type: 3Ph+N+PE

            The filter system
            ---------------------------------------
            The mobile filter system of the Cartmaster IFA type is thanks to the automatic
            Cleaning particularly suitable for welding work with unalloyed and
            alloyed steels, galvanized material and aluminum with heavy smoke development.
            It corresponds to the safety requirements for devices
            Welding fume class "W3" (high-alloy steels with alloy components > 30%
            Nickel-based alloy).If used as intended, the system can be used for the
            Recirculation mode used because the requirements for the
            Exceptions according to TRGS 560 are fulfilled. That special
            developed, dirt-dependent cleaning system ensures a good
            cleaning behavior of the filter cartridge, so that an optimal suction
            performance
            is guaranteed throughout the operation. The cleaned particles
            fall into a dust collection drawer from which they can then be disposed of.
            The powerful spiral fan ensures even with saturated
            Filter cartridges for a high volume flow.

            The filter media
            ---------------------------------------
            A baffle serves as a pre-separator for coarse particles.
            The filter cartridge installed below (dust class M, degree of separation > 99%)
            filters the finest smoke and dust particles. The cartridge is factory
            coated which increases the service life.

            The extraction arm
            ------------------------
            The extraction arm can be moved with the 3 internal joints
            Position spring support slightly and is in the set position
            cantilevered. A throttle flap integrated in the extraction hood enables the
            Flow rate setting.
          Datasheet
          Request / Contact
          used Other Machines Suction TEKA filtoo 1,1 kW 1x3 mtr.


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-8366978 · Suction

          TEKA - filtoo 1,1 kW 1x3 mtr. - - NEU -

          Technical details
          2500 m³/h︱ 2500 kPa︱volume capacity 1600 m³/h︱feed volume > 99 %︱ 1,1 kW︱ 72 dB(A)︱ 0,58 x 0,58 x 0,9 m︱ 80 kg︱ 230 V / 50 Hz V︱
          Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.
            2500 m³/h
            2500 kPa
            volume capacity 1600 m³/h
            feed volume > 99 %
            1,1 kW
            72 dB(A)
            0,58 x 0,58 x 0,9 m
            80 kg
            230 V / 50 Hz V
            Description :
            Particle pre-separator: coarse filter, pre-filter
            Main particle separator: main filter
            Gas separator: activated carbon filter

            Hose arm: joints inside

            What is the filtoo?
            The filtoo filter device newly developed by TEKA is a mobile filter system,
            for many tasks in the area of ??filtration of smoke and dust
            and gases can be used. The device was based on DIN EN ISO 15012-1
            (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140)
            for welding smoke class "W3" (degree of separation:> 99.9%). at
            The filtoo is intended to be used for the separation of smoke
            suitable, which by welding separation and joining processes at the
            Machining of unalloyed steels, including high-alloy chrome /
            Nickel steels are released.

            How does the filtoo work?
            The
            Polluted air sucked into the filter system. In a multi-level
            The filter process filters the particles / gases from the air stream and the
            clean air is fed back into the work area.

            Where can the filtoo be used?
            At welding workplaces, in the workshop area, for soldering applications, at
            Restorers and locksmiths.

            What do you get for your money?
            All you get is a completely ready-to-use "plug and play system"
            the recording device must be connected before commissioning.

            How is the filtoo set up?
            The housing is made of a stable sheet steel construction and is inside
            as well as provided with a powder coating on the outside. The filter elements
            are over
            A maintenance hatch is accessible and can therefore be accessed very easily and
            quickly
            can be removed. The system has functional controls.
          Datasheet
          Request / Contact
          used Other Machines Suction NOVUS Airtower FT 20.000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7227 · Suction

          NOVUS - Airtower FT 20.000 - - NEU -

          Technical details
          400 V / 50 Hz< 75 dB(A) ︱power capacity 15 kW︱volume capacity 20.000 m³/h︱weight 1590 kg︱
          Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor
            400 V / 50 Hz
            < 75 dB(A)
            power capacity 15 kW
            volume capacity 20.000 m³/h
            weight 1590 kg
            Description :
            Modular plug & play airtower
            for hall extraction of welding fumes with integrated, soundproofed
            Fan, automatic, differential pressure controlled
            Filter cleaning, system control with color display, particle pre-separation and
            IFA - tested filter cartridges. The system is for a volume flow of
            average 20,000 m³ / h designed

            1st filter stage - main filter:
            Filter area: 222 m²
            Number of filters: 6 pieces
            Dust class according to DIN EN
            60335-2-69: M.
            Degree of separation:> 99.9%
            Cleaning: Jet - Pulse
            Compressed air connection: NW 7.2 mm,
            4-6 bar, oil and water free
            2nd filter stage - fine dust filter.
            Filter area: 65 m²
            Filter class according to ISO 16890: ISO
            ePM1 80%
            3rd filter stage -
            Synthetic fiber mats:
            Filter area: 8 m²
            Filter class according to ISO 16890: ISO
            coarse 60%
            Total filter area: 295 m²
            Dimensions:
            Width filter unit: 2,066 mm
            Depth filter unit: 1,756 mm
            Height of filter unit: 3,643 mm
            Dust container: 200 liters

            Version Sanders incl .:
            - NOVUS efficiency package FT20.000
            - timer
            - NOVUS particle sensor
          Datasheet
          Request / Contact
          used Other Machines Suction TEKA StrongMaster IFA


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2810013 · Suction

          TEKA - StrongMaster IFA - - NEU -

          Technical details
          1860 m³/h︱ Pressung 2.900 Pa︱ 1,1 kW︱filter surface area 10 m²︱ 72 dB(A)︱ 400/50 V/Hz︱ 665 x 820 x 1365 mm︱ 165 kg︱
          mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media --------------------------------------- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ------------------------ The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.
            1860 m³/h
            Pressung 2.900 Pa
            1,1 kW
            filter surface area 10 m²
            72 dB(A)
            400/50 V/Hz
            665 x 820 x 1365 mm
            165 kg
            Description :
            mobile extraction, welding fume extraction
            (manual cleaning by loss of pressure)

            - Hose arm 3 m, joints inside
            - Filter cartridge: dust class M
            - Particle pre-separator: baffle plate
            - Current type: 3Ph+N+PE

            The filter system
            ---------------------------------------
            The mobile filter system of the type StrongMaster IFA is particularly suitable
            for Welding work with unalloyed and alloyed steels, galvanized material and
            Aluminum in case of heavy smoke development. She corresponds to the
            Safety requirements for devices in the welding fume class
            "W3" (high-alloy steels with alloy components > 30%
            nickel-based alloy). When used as intended, the system can be used for
            be used in the recirculation mode, since the requirements for the
            Exceptions according to TRGS 560 are fulfilled. The filter will
            via a maintenance door using a compressed air gun from the clean air side
            cleaned. The cleaned particles fall into a dust collection drawer from the
            they can then be disposed of. The powerful scroll fan
            ensures a high volume flow even with saturated filter cartridges.

            The filter media
            ---------------------------------------
            A baffle serves as a pre-separator for coarse particles.
            The filter cartridge installed below (dust class M, degree of separation > 99%)
            filters the finest smoke and dust particles. The cartridge is factory
            coated which increases the service life.

            The extraction arm
            ------------------------
            The extraction arm can be moved with the 3 internal joints
            Position spring support slightly and is in the set position
            cantilevered. A throttle flap integrated in the extraction hood enables the
            Flow rate setting.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          Investing in used machine accessories saves money
          Finding used machine accessories has never been easier

          You can enhance the performance of your business' equipment by investing in used machines and used machine accessories. If you only need to replace a single part or are just looking to increase efficiency and productivity used machine accessories are the perfect way to save yourself money. You can browse a wide range of used machines and used machine accessories online using LagerMaschinen's user-friendly search function. Find what you need quickly and easily from the comfort of your home or office.

          Find the best used machines and accessories at LagerMaschinen

          At LagerMaschinen you can find a huge selection of used machine accessories for a many different types of equipment. From conveyer belts and clamps to shafts and grinders you can find used machines and used machine accessories to suit both your budget and the needs of your business at LagerMaschinen. Whether you're shopping for replacement parts or just want to boost productivity investing in slightly used parts is a practical and cost efficient option.

          LagerMaschinen: saving you time and money on used machines

          Shopping for equipment and accessories for your business can be a daunting and time consuming process not to mention expensive. At LagerMaschinen you can enjoy a hassle-free shopping experience while getting high quality products at a fraction of the cost of new ones. Search for used machine accessories by location price or modelmake and find the best product for your business' needs. Business owners and home hobbyists alike can easily find affordable used machine accessories at LagerMaschinen.

          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  49779 - Niederlangen Fresenburger Weg 4 Deutschland


          Contact Trader


            Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik
           Fresenburger Weg 4
            49779 - Niederlangen
            Deutschland
            +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
            maschinen@heinz-sanders.de
            www.heinz-sanders.de
            Contact person:
          Frau Christine Fokken +49 (0) 5939 9406 40

           




          Machine category


          · Abkantpresse - hydraulisch · Absaugung · Airless- und Farbspritzgerät · Arbeitsbühne · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Bearbeitungszentrum · Behälterdrehvorrichtung · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbiegemaschine - 3 Walzen · Blechrichtmaschinen · Bohrerschleifmaschine · Brennschneidemaschine · Bügelsäge · CNC Drehmaschine · Container · Doppelgehrungssäge · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine-konventionell-elektronisch · Einständerpresse - Hydraulisch · Entgratmaschine · Fräsmaschine - Universal · Funiermaschine · Gabelhubwagen Hand · Gabelstapler · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Handwerkzeuge · Hubwagen - Elektro · Kaltkreissäge · Kehrmaschine · Kettenzug - elektrisch · Kompressoren · Koordinatenbohrmaschine · Laserschneidmaschine · Lochstanze · Messplatte · Nutenfräsmaschine - Vertikal · Nutenziehmaschine · Papierpresse · Positionierer · Profilstahlschere - Kombiniert · Punktschweißmaschine · Radialbohrmaschine · Reinigungsanlage · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Sandstrahlanlage · Scherenhubtisch · Schraubenkompressor · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißroboter · Schweißtisch · Schwenkbiegemaschine · Schwerlastanhänger · Schwerlastregal · Sicken- und Bördelmaschine · Sonstige Lagertechnik · Spannfutter · Spritzgerät · Stromaggregat · Säge- und Bohranlage · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Transportwagen · Unterstellbock · Vakuum-Lifter · Wasserstrahlschneidanlage · Werkbank · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschrank ·