Chain Hoist - Manual
Machinelist: Chain Hoist - Manual
Chain Hoist - Manual
- Walter Kames GmbH
- Dillenburger Weg 34
- 40229 Düsseldorf
- Deutschland
-
+49 211 215066 0
+49 211 215067 -
info@kames.de
www.kames.de
#1004-00462 · Chain Hoist - Manual
YALE - VS Plus - - 2008 -
Technical details
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00389 · Chain Hoist - Manual
KETTENSTERN - C - X678 - - - konventionell
Technical details
chain sprocket 2-parts for plug-in chain X678 Division 153.2mm 4 teeth Width 300mm tip circle 405mm Material: steel Item no. 0506.25.51 (alt. 5-014.307) Mat.No. 150615821 Teeth induction hardened Drive for conveyor with double keyway 36mm unused Weight 80kg Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
Cleaning unit
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-7233 · Cleaning unit
DIBO - CT80 BT 70 - - 2020 -
Technical details
- Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
- G. FOLMER Industriebedarf
- Mangenbergerstr. 347
- 42655 Solingen
- Deutschland
-
+49 21241071
+49 21241276 -
folmer.maschinen@t-online.de
#2010-592 · Cleaning unit
Vorwerk - Flaechenwaescher - - 2019 -
Technical details
Datasheet
Request / Contact
- Aleman Machines e.K.
- Am Mühlweg 1
- 73466 Lauchheim
- Deutschland
-
+49 (0)7363-6098 20
+49 (0)7363-6098 19 -
info@aleman-machines.com
www.aleman-machines.com
#1120-975 · Cleaning unit
HEIN HESO - Compo 1020 WST - - 2016 -
Technical details
- IMZ Maschinen Vertriebs GmbH
- Marie-Curie-Straße 19
- 73529 Schwäbisch Gmünd
- Deutschland
-
0049 (0) 7171 987130
0049 (0) 7171 9871329 -
info@imz.de
www.imz.de
#1075-6585 · Cleaning unit
DEBUS - DES 119 - - 2013 -
Technical details
swarf cleaner
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S592 · Cleaning unit
HAKO - HAKOMAT B70 CLHM - - 2013 -
Technical details
Datasheet
Request / Contact
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6754 · Cleaning unit
TENNANT - Tennant 7100 - - 2009 (2021) -
Technical details
Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
- Marcels Maschinen AG
- Anthoptstrasse 11
- 8222 Beringen (Schaffhausen)
- Schweiz
-
(0041) 44 872 3400
(0041) 44 872 3403 -
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch
#1065-4963 · Cleaning unit
JETO - EUROCLEAN - - 2000 -
Technical details
Datasheet
Request / Contact
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-LS7007 · Cleaning unit
Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -
Technical details
APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
TOP Manufacturer:
KETTENSTERN - YALE -