Hardening Furnace
Machinelist: Hardening Furnace
Cleaning unit
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-7233 · Cleaning unit
DIBO - CT80 BT 70 - - 2020 -
Technical details
- Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
- G. FOLMER Industriebedarf
- Mangenbergerstr. 347
- 42655 Solingen
- Deutschland
-
+49 21241071
+49 21241276 -
folmer.maschinen@t-online.de
#2010-592 · Cleaning unit
Vorwerk - Flaechenwaescher - - 2019 -
Technical details
Datasheet
Request / Contact
- Aleman Machines e.K.
- Am Mühlweg 1
- 73466 Lauchheim
- Deutschland
-
+49 (0)7363-6098 20
+49 (0)7363-6098 19 -
info@aleman-machines.com
www.aleman-machines.com
#1120-975 · Cleaning unit
HEIN HESO - Compo 1020 WST - - 2016 -
Technical details
- IMZ Maschinen Vertriebs GmbH
- Marie-Curie-Straße 19
- 73529 Schwäbisch Gmünd
- Deutschland
-
0049 (0) 7171 987130
0049 (0) 7171 9871329 -
info@imz.de
www.imz.de
#1075-6585 · Cleaning unit
DEBUS - DES 119 - - 2013 -
Technical details
swarf cleaner
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S592 · Cleaning unit
HAKO - HAKOMAT B70 CLHM - - 2013 -
Technical details
Datasheet
Request / Contact
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6754 · Cleaning unit
TENNANT - Tennant 7100 - - 2009 (2021) -
Technical details
Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
- Marcels Maschinen AG
- Anthoptstrasse 11
- 8222 Beringen (Schaffhausen)
- Schweiz
-
(0041) 44 872 3400
(0041) 44 872 3403 -
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch
#1065-4963 · Cleaning unit
JETO - EUROCLEAN - - 2000 -
Technical details
Datasheet
Request / Contact
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-LS7007 · Cleaning unit
Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -
Technical details
APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
Hardening Furnace
- Marcels Maschinen AG
- Anthoptstrasse 11
- 8222 Beringen (Schaffhausen)
- Schweiz
-
(0041) 44 872 3400
(0041) 44 872 3403 -
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch
#1065-J608 · Hardening Furnace
SNIJSTAAL FABRICAGE B.V. - B20 - - 1995 -
Technical details
Datasheet
Request / Contact
- Hans Klein Werkzeugmaschinenhandel GmbH
- Im Mühlgut 2-4
- 77815 Bühl
- Deutschland
-
0049 (0) 7223 9617-0
0049 (0) 7223 58512 -
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de
#1052-11240 · Hardening Furnace
HERAEUS - MR 170 - - 1989 -
Technical details
Datasheet
Request / Contact
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-769691 · Hardening Furnace
HERAEUS - KR 260 E - - 1985 -
Technical details
- Kirchgeorg Werkzeugmaschinen
- Frankfurter Straße 141
- 63303 Dreieich-Sprendlingen
- Deutschland
-
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50 -
info@kirchgeorg.de
www.kirchgeorg.de
#1072-20397 · Hardening Furnace
NOLZEN - HS 38 / 23 / 55 - - 1984 -
Technical details
- Serial-No.: 13817
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-02803 · Hardening Furnace
HERAEUS - EFU60/150 - - 1972 -
Technical details
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-097024 · Hardening Furnace
HERAEUS - DKM 5 - - 1965 -
Technical details
Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h External dimensions approx. width x height x depth 1.000 x 1.200 x 2.100 mm Chamber lining internal Schamotte Connected load approx. 9 & 25 kW - 380 V - 50 cycle Weight approx. 1 .500 kg Accessories / Special Features: Preheating chamber and hardening chamber arranged on top of each other with pneumatic doors which are controlled by foot pedal. Separate switching- and control cabinet with temperature display and ampere display, pre-selection of temperature possible. Deposit area on oven (year 1981) size approx. 500 x 600 mm, Step transformator for control of heating elements (protection and reduction of connected load) Various new heating spirals. These ovens are ideal for tool construction, especially for hardening of high cutting speed tools. Condition : both ovens are in good to very good condition Delivery : ex stock – as inspected Payment : net – after completion of contract We would appreciate your order.
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-162924 · Hardening Furnace
HERAEUS - KR 260 - - 1960 -
Technical details
Hardening furnace
- Valk Machines BV
- Kadijk 6
- 8531XD Lemmer
- Niederlande
-
+31 514562904
-
sales@valkmachines.com
www.valkmachines.com