,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Cleaning unit

          Machinelist: Cleaning unit


          Cleaning unit

          used Other attachments Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Vorwerk Flaechenwaescher


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-592 · Cleaning unit

          Vorwerk - Flaechenwaescher - - 2019 -

          Technical details
          total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HEIN HESO Compo 1020 WST


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-975 · Cleaning unit

          HEIN HESO - Compo 1020 WST - - 2016 -

          Technical details
          dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            dimension 3.709 x 1.744 x 1.942 mm
            loading height 1.002 mm
            weight 1.332 kg
            tank capacity 600 l
            through-put width 307 mm


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit DEBUS DES 119


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6585 · Cleaning unit

          DEBUS - DES 119 - - 2013 -

          Technical details
          6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          swarf cleaner
            6,0 m3/min
            rated current 9 A
            total power requirement 2,5 kW
            Description :
            swarf cleaner


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HAKO HAKOMAT B70 CLHM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S592 · Cleaning unit

          HAKO - HAKOMAT B70 CLHM - - 2013 -

          Technical details
          total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit JETO EUROCLEAN


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4963 · Cleaning unit

          JETO - EUROCLEAN - - 2000 -

          Technical details
          temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱
            temperature 80/130 °C
            0 100 kg
            filling capacity 750 l
            basket dimensions 670x480 mm
            number 25
            total power requirement 43 kW
            weight of the machine ca. 890 kg
            dimensions of the machine ca. 185x190x150 cm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Kohlhoff Hygienetechnik Sailer SSR-1


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-LS7007 · Cleaning unit

          Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -

          Technical details
          0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱
          APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
            0 20 l/min
            total power requirement 4 kW
            Description :
            APRON CLEANER
            APRON CLEANER

            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.
            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 5.800 €
          Datasheet
          Request / Contact

          Robot - Handling

          used Other attachments Robot - Handling SCORBOT - ER V plus


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5436 · Robot - Handling

          SCORBOT - ER - V plus - - unbekannt -

          Technical details
          number of controlled axis 5 ︱workpiece weight 1 kg︱throat 610 mm︱total power requirement 0,1 kW︱weight of the machine ca. 0,02 t︱dimensions of the machine ca. - m︱
            number of controlled axis 5
            workpiece weight 1 kg
            throat 610 mm
            total power requirement 0,1 kW
            weight of the machine ca. 0,02 t
            dimensions of the machine ca. - m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA KR 120 R2700


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06047 · Robot - Handling

          KUKA - KR 120 R2700 - - 2019 -

          Technical details
          number of controlled axis - ︱workpiece weight - kg︱throat - mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Mobile robot cell with base frame and aluminum acrylic glass protective cabin - Solid aluminum clamping table for horizontal and vertical clamping - High-precision KUKA robot KR 120 R2700 extra HA with robot manual control panel - Spindle for milling - Control cabinet for KUKA robots - Control cabinet for milling spindle Robot INTERFACE INTERFACE Parallel Safety X11/X13 INTERFACE implementation X51 INTERFACE Ethernet 1xRJ45 X66 INTERFACE reference switch X42 DIGITAL I/O 16/16/4 MCC-30.1S KR C4 Docs & Parts Standard KSS 8.3 KUKA.ProfiNet Controller/Device 3.2 KUKA.SafeOperation 3.2 KUKA.PLC ProConOS4-1.1 ltd KUKA.CNC 2.1 KUKA.DiagnosticSafety 2.1 KUKA.WorkVisual KUKA smartPAD 10 m KUKA smartPAD holder Cable set 7m CON X20 Reference switch assembly 15m straight Robot simulation software OCTOPUZ including the following features: - Create your own robot cells - CAD import of all common systems - Free library of almost all robots and tools on the market - Import CAM paths from Mastercam/Tool Applications/Settings - Interference monitoring/display (singularity, axis limitation, range, collision) - Simulation of several robots - Connect & control digital I/O - Connect & control external axes (linear & rotary) - Unlimited number of axes (limited only by computer hardware) - Runtime calculation based on OCTOPUZ - Export as 3D PDF Postprocessor The following work can also be done with this expansion stage to be done: - welding - milling - Pick and place - Cutting out - Trimming - Ribbons - polishing - Laser cutting, water jet cutting - and much more... OCTOPUZ SolidCAM interface for transferring all relevant data in Octopuz control cabinet and control OPERATOR F5 ETHERCAT DIAGNOSTICS + DISPLAY KEB COMBIVERT F5-H 29KVA IN=42, OA PM=18.5KW AC/DC 3PH 400V KTY GTR7 EA FILTER housing G 500V/33A EN55011-B du/dt 500V/µs Fmax=1600Hz at FSmax=16kHz Tmax=45°C Motor cable: 1 x 50m, leakage current: 25mA BR RESISTANCE 30 OHM 1.2KW 400V / ED = 6% / PP =19KW Connection with clamp with temperature contact Triple module ABM: 90x96x470mm COMBICONTROL C6 HMI LC 7''W HMI CPU type 1/1 GB RAM, integrated micro UPS 7'' touch / aluminum front Windows Embedded Compact 7 + PLC runtime (basic) + COMBIVIS studio HMI runtime (Basic) + COMBIVIS connect runtime (Pro) KEB-IO ETHERCAT DI16 (1ms) / DO 16 (500mA) KEB-IO ETHERCAT SOCKET RAIL 36-pin KEB-IO ETHERCAT BUS COUPLER KEB COMBIVIS studio 6 IDE 1 license for PC USB memory with installation files, activation of the license after Installation specifying the MAC address Minimum system requirements: - 1GB RAM (2GB recommended) - 1 GHz Pentium or similar - 1 GB free hard disk space - Screen resolution 1024 x 768 - Operating system: Windows XP, Windows Vista, Windows 7 (each 32/64 bit) KEB COMBIVIS studio HMI IDE 1 license for PC Minimum system requirements: - 1GB RAM (2GB recommended) - 1 GHz Pentium or similar - 1 GB of free hard disk space - Screen resolution 1024 x 768 - Operating system: Windows XP, Windows Vista, Windows 7 (each 32/64 bit) ADAPTER DSUB9 RJ45, 40cm USB SERIAL CONVERTER The robot machining center has never been used in machining. Will be sold with one year warranty. The price includes the software and the milling spindle. The robot can be offered without the software and the milling spindle. Than we can reduce the price 25.000,- Euro.
            number of controlled axis -
            workpiece weight - kg
            throat - mm
            Description :
            Mobile robot cell with base frame and aluminum acrylic glass protective cabin
            - Solid aluminum clamping table for horizontal and vertical clamping
            - High-precision KUKA robot KR 120 R2700 extra HA with robot manual control
            panel
            - Spindle for milling
            - Control cabinet for KUKA robots
            - Control cabinet for milling spindle

            Robot INTERFACE
            INTERFACE Parallel Safety X11/X13
            INTERFACE implementation X51
            INTERFACE Ethernet 1xRJ45 X66
            INTERFACE reference switch X42
            DIGITAL I/O 16/16/4
            MCC-30.1S
            KR C4 Docs & Parts Standard
            KSS 8.3
            KUKA.ProfiNet Controller/Device 3.2
            KUKA.SafeOperation 3.2
            KUKA.PLC ProConOS4-1.1 ltd
            KUKA.CNC 2.1
            KUKA.DiagnosticSafety 2.1
            KUKA.WorkVisual
            KUKA smartPAD 10 m
            KUKA smartPAD holder
            Cable set 7m CON X20
            Reference switch assembly 15m straight

            Robot simulation software OCTOPUZ
            including the following features:
            - Create your own robot cells
            - CAD import of all common systems
            - Free library of almost all robots and tools on the market
            - Import CAM paths from Mastercam/Tool Applications/Settings
            - Interference monitoring/display (singularity, axis limitation,
            range, collision)
            - Simulation of several robots
            - Connect & control digital I/O
            - Connect & control external axes (linear & rotary)
            - Unlimited number of axes (limited only by computer hardware)
            - Runtime calculation based on OCTOPUZ
            - Export as 3D PDF
            Postprocessor The following work can also be done with this expansion stage
            to be done:
            - welding
            - milling
            - Pick and place
            - Cutting out
            - Trimming
            - Ribbons
            - polishing
            - Laser cutting, water jet cutting
            - and much more...
            OCTOPUZ SolidCAM interface for transferring all relevant data in Octopuz

            control cabinet and control
            OPERATOR F5 ETHERCAT
            DIAGNOSTICS + DISPLAY
            KEB COMBIVERT F5-H
            29KVA IN=42, OA PM=18.5KW
            AC/DC 3PH 400V KTY GTR7
            EA FILTER housing G 500V/33A
            EN55011-B du/dt 500V/µs
            Fmax=1600Hz at FSmax=16kHz Tmax=45°C
            Motor cable: 1 x 50m, leakage current: 25mA
            BR RESISTANCE 30 OHM 1.2KW
            400V / ED = 6% / PP =19KW
            Connection with clamp with temperature contact
            Triple module ABM: 90x96x470mm
            COMBICONTROL C6 HMI LC 7''W
            HMI CPU type 1/1 GB RAM, integrated micro UPS
            7'' touch / aluminum front
            Windows Embedded Compact 7
            + PLC runtime (basic)
            + COMBIVIS studio HMI runtime (Basic)
            + COMBIVIS connect runtime (Pro)
            KEB-IO ETHERCAT
            DI16 (1ms) / DO 16 (500mA)
            KEB-IO ETHERCAT
            SOCKET RAIL 36-pin
            KEB-IO ETHERCAT
            BUS COUPLER
            KEB COMBIVIS studio 6 IDE
            1 license for PC
            USB memory with installation files, activation of the license after
            Installation specifying the MAC address
            Minimum system requirements:
            - 1GB RAM (2GB recommended)
            - 1 GHz Pentium or similar
            - 1 GB free hard disk space
            - Screen resolution 1024 x 768
            - Operating system: Windows XP, Windows Vista, Windows 7 (each 32/64 bit)
            KEB COMBIVIS studio HMI IDE
            1 license for PC
            Minimum system requirements:
            - 1GB RAM (2GB recommended)
            - 1 GHz Pentium or similar
            - 1 GB of free hard disk space
            - Screen resolution 1024 x 768
            - Operating system: Windows XP,
            Windows Vista, Windows 7 (each 32/64 bit)
            ADAPTER DSUB9
            RJ45, 40cm
            USB SERIAL CONVERTER


            The robot machining center has never been used in machining.
            Will be sold with one year warranty.

            The price includes the software and the milling spindle.

            The robot can be offered without the software and the milling spindle.
            Than we can reduce the price 25.000,- Euro.


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA KR 210 R2700 Prime


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-2091 · Robot - Handling

          KUKA - KR 210 R2700 Prime - - 2014 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 210 kg︱throat 2697 mm︱total power requirement kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 210 kg
            throat 2697 mm
            weight of the machine ca. 1,1 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling VEP AUTOMATION SL125-50/30-V/R-H-X-X


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00447 · Robot - Handling

          VEP AUTOMATION - SL125-50/30-V/R-H-X-X - - 2013 - konventionell

          Technical details
          clamping surface 44x50 cm︱flange surface 60x50 cm︱height 18,5 cm︱length with cylinder 84 cm︱year of construction 2013 -︱weight 150 kg︱
          VEP AUTOMATION Linear unit No.2 with sleigh SL125-50/30-V/R-H-X-X Item No. 9903 clamping surface 44x50cm flange surface 60x50cm height 18.5cm length with cylinder 84cm unused year of construction 2013 weight 150kg We have 2 different types in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            clamping surface 44x50 cm
            flange surface 60x50 cm
            height 18,5 cm
            length with cylinder 84 cm
            year of construction 2013 -
            weight 150 kg
            Description :
            VEP AUTOMATION
            Linear unit No.2
            with sleigh
            SL125-50/30-V/R-H-X-X
            Item No. 9903
            clamping surface 44x50cm
            flange surface 60x50cm
            height 18.5cm
            length with cylinder 84cm
            unused
            year of construction 2013
            weight 150kg

            We have 2 different types in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 1.400 €
          Datasheet
          Request / Contact
          used Other attachments Robot - Handling FEE


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3374 · Robot - Handling

          FEE - - - 2010-2014 -

          Technical details
          number of controlled axis - ︱workpiece weight - kg︱throat - mm︱total power requirement - kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            number of controlled axis -
            workpiece weight - kg
            throat - mm
            total power requirement - kW


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3335 · Robot - Handling

          KUKA - VKRC2 - - 2004 -

          Technical details
          number of controlled axis unkt. ︱workpiece weight unbkt kg︱throat unbkt. mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            number of controlled axis unkt.
            workpiece weight unbkt kg
            throat unbkt. mm


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3345 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. 1,43 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm
            weight of the machine ca. 1,43 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3340 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. 1,43 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm
            weight of the machine ca. 1,43 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3342 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. 1,43 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm
            weight of the machine ca. 1,43 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3341 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. 1,43 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm
            weight of the machine ca. 1,43 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3347 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. 1,43 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm
            weight of the machine ca. 1,43 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3343 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA VKRC2 KR180


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3346 · Robot - Handling

          KUKA - VKRC2 KR180 - - 2002 -

          Technical details
          number of controlled axis 6 ︱workpiece weight 180 kg︱throat 2700 mm︱total power requirement kW︱weight of the machine ca. 1,43 t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight 180 kg
            throat 2700 mm
            weight of the machine ca. 1,43 t


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling FANUC Robot S-Model 10


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02872 · Robot - Handling

          FANUC - Robot S-Model 10 - - 1992 - System R-J

          Technical details
          number of controlled axis 6 ︱workpiece weight . kg︱throat . mm︱Control System R-J ︱Number of working hours 38217 h︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            number of controlled axis 6
            workpiece weight . kg
            throat . mm
            Control System R-J
            Number of working hours 38217 h


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA X20 -X30


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3363 · Robot - Handling

          KUKA - X20 -X30 - - -

          Technical details
          number of controlled axis unbkt. ︱workpiece weight unbkt. kg︱throat unbkt. mm︱total power requirement unbkt. kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            number of controlled axis unbkt.
            workpiece weight unbkt. kg
            throat unbkt. mm
            total power requirement unbkt. kW


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Robot - Handling KUKA KR 500-2 ed05


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-741106 · Robot - Handling

          KUKA - KR 500-2 ed05 - - - KUKA VKRC2 edit 2005

          Technical details
          number of controlled axis ︱workpiece weight kg︱throat mm︱Controls KUKA VKRC2 edit 2005
          Technical description : 6-axis Industrial Robot with payload of 500 kgs including electrical cabinet operating panel and cable on 7th axis lienar guiding with 13.3 m travel.
            Controls KUKA VKRC2 edit 2005
            Description :
            Technical description :

            6-axis Industrial Robot with payload of 500 kgs
            including electrical cabinet operating panel and cable
            on 7th axis lienar guiding with 13.3 m travel.




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •