A + B Werkzeuge Maschinen Handels GmbH - Stockist for used machines

width of the strips 150 mm︱band length 2000 mm︱band speed 30,0 mm/sek︱grinding width 500 Plantisch mm︱suction capacity 630 m³/h︱total power requirement 3,75 kW︱weight of the machine ca. 100 kg︱range L-W-H 1100 x 550 x 1035 mm︱

---

Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

width of the strips 150 mm︱band length 2000 mm︱band speed 14,5 / 29 m/sec︱grinding width 460 x 150 Plantisch mm︱Dust suction hood 100 mm︱total power requirement 4,0 kW 100% ED︱weight 84,0 kg︱range L-W-H 1.080x520x1000 mm︱

---

** Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

width of the strips 150 mm︱band length 2000 mm︱band speed 29,0 / 14,5 m/sek︱grinding width 460 x 150 Plantisch mm︱Dust suction hood 100 mm︱total power requirement 3,0 kW 100% ED︱weight of the machine ca. 90,0 kg︱range L-W-H 1080 x 440 x 1000 mm︱

---

** Stable belt grinding machine with 3.0 KW motor ** with 2x tape speeds ** Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

width of the strips 300 mm︱band length 2070 mm︱band speed 7,0 m/sec︱engine output 1,5 kW︱surface of working table 750 x 380 mm︱diameter 87,7 Führungsrollen mm︱total power requirement 400 Volt︱weight of the machine ca. 88,0 kg.︱range L-W-H 1050 x 600 x 400 mm︱

---

** MADE IN GERMANY ** Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

width of the strips 150 mm︱band length 2000 mm︱band speed 29,0 m/sek︱grinding width 460 x 150 Plantisch mm︱Dust suction hood 100 mm︱total power requirement 4,0 kW 100% ED︱weight of the machine ca. 84,0 kg︱range L-W-H 1080 x 520 x 1000 mm︱

---

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

width of the strips 75 mm︱band length 2000 mm︱band speed 30,0 mm/sek︱grinding width 500 Plantisch mm︱suction capacity 630 m³/h︱total power requirement 3,75 kW︱weight of the machine ca. 90 kg︱range L-W-H 1100 x 550 x 1035 mm︱

---

Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

width of the strips 75 mm︱band length 2000 mm︱band speed 29,0 m/sek︱grinding width 460 x 75 Plantisch mm︱Dust suction hood 100 mm︱total power requirement 3,0 kW 100% ED︱weight of the machine ca. 66,0 kg︱range L-W-H 1080 x 440 x 1000 mm︱

---

Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

width of the strips 75,0 mm︱band length 2000 mm︱band speed 29,0 / 14,5 m/sek︱grinding width 460 x 75 Plantisch mm︱Dust suction hood 100 mm︱total power requirement 3,0 kW 100% ED︱weight of the machine ca. 72,0 kg︱range L-W-H 1080 x 440 x 1000 mm︱

---

** Stable belt grinding machine with 3.0 KW motor ** with 2x tape speeds ** Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

width of the strips 100 mm︱band length 2000 mm︱band speed 15/30 m/sec︱tube diameter 20 - 76 mm︱angle adjustable from - to 30 - 90 Grad︱Dust suction hood 2 x 75 mm︱motor speeds: 1420 / 2660 Upm.︱face grinding attachment 400 x 100 mm︱total power requirement 2,5 / 3,3 kW︱weight of the machine ca. 148 kg.︱range L-W-H 750 x 1400 x 1200 mm︱

---

Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

grinding width 32 mm︱max. dia. of grinding wheel 250 mm︱grinding wheel size 250 x 32 x 32 mm︱weight 33 kg︱turning speeds 1475 U/min︱engine output 1,5 kW︱voltage 400 V︱range L-W-H 510 x 320 x 360 mm︱

---

scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

wheel diameter 300 mm︱turning speeds 930 / 1430 U/min︱tool taper Ø 40,0 mm︱total power requirement 1,3 / 1,7 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1100 x 600 x 1200 mm︱

---

Universal grinding bench and polishing bench for trade and industry usable, in a very stable construction, designed for continuous operation Description : - heavy / robust polishing machine - 1x polishing/grinding station - pole-changing motor - Machine base - Connection cable + plug (16A)

wheel diameter 250 mm︱grinding wheel size 250 x 25 x 20 mm︱turning speeds 2850 U/min︱voltage 400 V︱total power requirement 2,0 kW︱weight of the machine ca. 28 kg.︱dimensions of the machine ca. 600 x 290 x 300 mm︱

---

Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

grinding length 400 mm︱grinding width 150 mm︱workpiece height 300 mm︱turning speed range - stepless max. 2800 U/min︱work table: 400 x 150 ︱max. dist. between floorpl. and spindle-nose 350 mm︱grinding wheel size 200 mm︱feed Tisch 2,0 - 20,0 m/min︱voltage 380 V︱total power requirement 2,6 kW︱weight of the machine ca. 900 kg︱range L-W-H 1300 x 1200 x 1500 mm︱

---

Furnishing: - compact surface grinding machine - K. JUNG magnetic clamping plate S1 10/25 - Lots of spare grinding wheels - side control panel - K. JUNG sanding dust extraction - additional vice

work piece width 1500 mm︱plate thickness 0,8 - 100 mm︱Brush width 490 mm︱Brush diameter 200 mm︱immersion travel ca. 1.5 - 2.0 mm︱grinding speed 200 - 1200 U/min︱band speed 0,8 - 4.0 m/min︱work height max. 950 mm︱Required air-pressure 5.0 bar︱Air consumption ca. 2.200 L/min︱number of brushing / polishing units 8 Stück︱Control NC Touch ︱voltage 400 V︱total power requirement ca. 40.0 kW︱weight of the machine ca. 6.100 kg.︱dimensions of the machine ca. 3700 x 2750 x 2080 mm︱

---

** Well maintained condition with lots of accessories ** New price including accessories approx. 180.000 euros ** Special price on request Furnishing : - ERNST dry wide belt sanding machine “TYP ATLAS ER ROTOR” * Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen * Control of the entire system * graphically supported color terminal * Adjustment of the immersion depth of the grinding brushes - Coordinate switch for: * continuous feed speed from the conveyor belt * Continuous adjustment of the material thickness - Material conveyor belt with a vacuum track * Perforation with conical countersinks for better adhesion of the workpieces * minimum workpiece size length 80.0 mm / area 200 cm² - Rotor head for even and strong edge rounding * for flat and profiled workpieces * for foiled and galvanized workpieces * removes sharp edges from punching and laser burrs * Rotation around the rotor axis * 8x counter-rotating brush rollers with sanding lamellas - complete machine documentation machine + accessories Special accessories included: - ERNST electro-motive material supply and discharge conveyor belt - WESCO VARIO CELL type 4.16 extraction system including pipe connections * 7.5 kW fan GCM-4540 incl. pre-separator - lots of new replacement grinding brushes * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9238993

saw blade diameter 350 mm︱dimensions of saw-blade 350 x 3.4 x 32 mm︱turning speeds 1700 / 3400 U/min︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 x 105 mm︱capacity 90 degrees: flat 180 x 70 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: square 95 x 95 mm︱capacity 45 degrees: flat 135 x 60 mm︱total power requirement 1.5 / 2.2 kW︱weight of the machine ca. 530 kg.︱range L-W-H 2000 x 1500 x 1700 mm︱

---

** Machine from a workshop for the disabled ** good condition (!!) Furnishing : - fully automatic aluminum circular sawing machine - with input of section length and number of pieces - swiveling control panel, right front - Miter adjustment 45° left/right - pneumatic material clamping (horizontal+vertical) - programmable feed carriage - Micro spray device (oiler) - Machine base, with forklift pockets - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164095 * Machinevideo : https://www.youtube.com/watch?v=XQqvY6g9Y6U

saw blade diameter 380 mm︱cutting diameter 120 mm︱capacity 90 degrees: square 90 x 90 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: square 80 x 80 mm︱turning speeds 2.800 U/min︱voltage 400 V︱compressed air 7,0 bar︱total power requirement 3,0 kW︱weight 220 kg︱

---

* current new price ~ 10.000 euros Furnishing : - Versatile use for aluminum and plastic profiles - Swivel range 0°-45° stepless to the left and right - Detents at 15°, 30° and 45° - Stable, ground, continuous support table - with precisely mounted rotary table - Wear-free and quiet multiple V-belt drive - saw blade - Hydropneumatic saw feed - 2-hand operation - Machine with stand - Pneumatic profile clamping device (2x horizontal, 1x vertical)

saw blade diameter 350 mm︱cutting diameter 115 mm︱capacity 90 degrees: flat 200 x 80 mm︱turning speeds 1700/3400 U/min︱saw-blade dia. 350 x 3,3 x 40 mm︱motor 400 Volt︱total power requirement 1,8/2,6 kW︱weight ca. 600 kg︱range L-W-H 1000 x 850 x 1500 mm︱

---

Furnishing: - semi-automatic ALU circular saw - pneumatic material clamping - continuous adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base * Machine link: https://www.youtube.com/watch?v=k-VA1e8rSJI

saw blade diameter 400 mm︱cutting diameter 135 mm︱capacity 90 degrees: flat 280 x 70 mm︱capacity 90 degrees: square 120 x 120 mm︱capacity 45 degrees: flat 210 x 55 mm︱capacity 45 degrees: square 105 x 105 mm︱turning speeds max. 3000 U/min︱saw-blade dia. 400 x 3,2 x 40 mm︱motor 400 Volt︱total power requirement 4,0 kW︱weight 650 kg︱range L-W-H 910 x 1200 x 1700 mm︱

---

Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

saw blade diameter 350 x Ø 32 mm︱turning speeds 1800 / 3600 U/min︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: flat 200 x 88 mm︱capacity 90 degrees: square 110 x 110 mm︱capacity 45 degrees: round 115 mm︱capacity 45 degrees: flat 150 x 80 mm︱capacity 45 degrees: square 110 x 110 mm︱hole of sawblade 32 mm︱work height max. 865 mm︱clamping head: max. 200 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 225 kg︱range L-W-H 1100 x 920 x 1700 mm︱

---

Furnishing: - Aluminum circular saw machine - 1x HM circular saw blade - Double miter device left + right 45 ° - Head swivel cuts up to 45 ° * Cutting area around 90 ° = 65.0 mm - manual material tension - machine base

saw blade diameter 420 x Ø 40 mm︱cutting diameter 170 mm︱cutting length 410 mm︱dimensions of saw-blade 420x3,2/2,4x40 mm︱turning speeds 3500 U/min︱Dust suction hood 100 mm︱total power requirement 3,0 kW︱weight of the machine ca. 120 kg︱dimensions of the machine ca. 1300 x 800 x 1600 mm︱

---

- Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm ** Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

saw blade diameter 350 x Ø 30/40 mm︱cutting diameter 135 mm︱cutting length 430 mm︱dimensions of saw-blade 350x3,0/2,4x40 mm︱turning speeds 3800 U/min︱Dust suction hood 100 mm︱total power requirement 3,0 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 1300 x 800 x 1600 mm︱

---

- Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm ** Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

saw blade diameter 400 mm︱cutting diameter 130 mm︱capacity 90 degrees: flat 220 x 90 mm︱turning speeds 3200 U/min︱saw-blade dia. 400 x 3,2 x 40 mm︱motor 400 Volt︱total power requirement 3,0 kW︱weight 125 kg︱range L-W-H 700 x 900 x 1500 mm︱

---

Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping

saw blade diameter 350 mm︱cutting diameter 120 mm︱capacity 45 degrees: flat 180 x 50 mm︱capacity 45 degrees: round 116 mm︱capacity 90 degrees: flat 200 x 80 mm︱capacity 45 degrees: square 100 x 100 mm︱capacity 90 degrees: square 105 x 105 mm︱capacity 90 degrees: round 120 mm︱weight of the machine ca. 266 kg︱

---

Furnishing: - Aluminum circular saw with manual clamping device - machine base - without saw blade

saw blade diameter 350 x 32 mm︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 mm︱capacity 90 degrees: flat 180 x 70 mm︱capacity 45 degrees: round 120 mm links︱capacity 45 degrees: round 110 mm rechts︱capacity 45 degrees: square 100 mm links︱capacity 45 degrees: square 95 mm rechts︱capacity 45 degrees: flat 135 x 60 mm︱dimensions of saw-blade 350 x 32 ︱turning speeds 1700 / 3400 U/min︱capacity 45 degrees: round 120 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 210 kg︱dimensions of the machine ca. 1170 x 860 x 1600 mm︱

---

Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base