sheet width 2020 mm︱plate thickness 2,00 mm ST︱thickness at "Niro-steel" 1.25 mm︱bending angle max. 135 °︱stroke of upper beam 120 mm︱adjustment UW 25.0 mm︱Control CFB 120 ︱voltage 400 V︱total power requirement 2.0 kW︱weight of the machine ca. 1410 kg.︱dimensions of the machine ca. 2930 x 2200 x 1175 mm︱

---

** new condition (!!) ** New price at the time including accessories was approx. 35.000 euros ** Special price on request SCHRÖDER bending beam drive enables high forces and moments Efficiency. This means significantly reduced drive power lower energy consumption, but with increasing speed and Running - dynamics. The upper beam drive designed in the middle enables balanced torque distribution across the entire drive unit. The completely closed drive and guide units almost maintenance and wear-free operation. The regulation of the individual Drive axles are basically with a high quality parameter switchable frequency converter implemented. The CNC graphics control is combined with servo drives, which are optimized by the Power utilization results in a significant increase in speed and power. Furnishing: - SCHRÖDER CNC control CFP 120 * Simple and clear program creation * Enter data via 12" LCD touch screen (swivelable) * Program set consisting of: Sheet thickness in mm or inches Opening width of the upper beam in mm or inches Bend angle Bend angle correction Dimension of the back gauge * Tool library * PLC control program * Tool position memory for each program * max. 99 cycles per bending set * Information aids such as actual value display / error display etc. * EMERGENCY stop button at the front - very high travel speeds of all controlled axes - CNC electro-motorized back gauge, with sheet metal support surface * Sheet metal support surface made of stainless steel (special accessory) - manual bending beam adjustment.. max. 25.0 mm - SCHRÖDER bending tool set - 1x freely movable double foot switch - Connection cable including power plug - Control cabinet installed on the side - 2x transport hooks for hanging the machine - original instruction manual

sheet width 3220 mm︱plate thickness 3,00 mm ST︱thickness at "Niro-steel" 2,00 mm︱daylight opening OW 300 mm︱speed OW 100 mm/sec︱adjustment BW 80,0 mm︱speed BW 120 Grad/sec︱back stop - adjustable k.A. mm︱speed HA 300 mm/sec︱compressed air 6,0 bar︱work height max. 869 mm︱total power requirement 8,8 kW︱voltage 400 V︱weight 5600 kg︱range L-W-H 4575 x 2450 x 1737 mm︱

---

** current new price ~ 220.000 euros ** from a maintenance workshop Furnishing: - Motorized universal folding machine * high-precision mechanics with modern control technology * for single and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - rotating upper beam / as an automatic tool changing system * with 2x tool stations (sharp and goat's foot bending rail) * Reduces set-up and idle times * Saves time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * with touchscreen control panel, swiveling front right * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation * Windows XP operating system * Swivel control, right front - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. - with divided / rear sheet metal support surface, including ball transfer units - Free-moving double foot switch - original instruction manual ** Special accessories included : - 1x 30° upper tool sharpening rail - 1x divided set upper tool goat foot rail - rear side stop (workpiece guide) - rear sheet metal support table made of stainless steel, with ball rollers - Pneumatically lowerable backgauge fingers - CNC motorized lower beam adjustment

sheet width 1020 mm︱plate thickness 3,00 mm︱distance between columns mm︱stroke 120 mm︱total power requirement kW︱weight of the machine ca. 1,010 t︱dimensions of the machine ca. 1,97 x 1,20 x 1,20 m︱

---

• Sharpening rail • Bending rails 10 mm, 25 mm • Goat's foot splint H 50 mm, length 745 mm. segmented • Manual backgauge • POS 400 control • Operation manual

sheet width 3220 mm︱plate thickness 2,00 mm︱daylight opening 160 mm︱adjustment 80,0 mm︱bending angle max. 120 °︱total power requirement 4,0 kW︱weight 3.965 kg︱range L-W-H 4575 x 2450 x 1550 mm︱

---

Furnishing: - Motorized universal folding machine * for single and series production - rotating upper beam / as an automatic tool changing system * Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 * with touch screen control panel * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : * Station 1: 1x pointed rail * Station 2: 1x split goat foot tool - Free-moving double foot switch - Operation manual

sheet width 2030 mm︱plate thickness 4,00 mm︱thickness at "Niro-steel" 2,50 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱

---

** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades