Franz Teutenberg GmbH & Co KG - Stockist for used machines
Machinelist:
Tube Drawing Machine
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403524R · Tube Drawing Machine
Haginger - 250/3 - - 1981/2006 -
Technical details
Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min pre-tube 12.5 meter Drawing length: max.15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.
Pointing machine
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403783 · Pointing machine
KROLLMANN - FM-H-4 - - 2000 -
Technical details
POINTING - MILLING MACHINE FOR BARS Fabr.: Krollmann Type: FM H4 year: 2000 Pointing Milling machine with 4 pieces hard-metal turn-over plates working range: round + profile + square: 80 (100) to 25 mm Ø Milling drive: 380 / 420 V. 18,5 kW, 50 Hz, 1465 rpm Machine consists of: - pointing milling machine with oil mist exhauster with hydraulical clamping and pusher device - hydraulic control unit - cooling medium tank with chip box - command desk - electrical cabinet with air condition, SIEMENS S 7-300 control
Wire Drawing Machine
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-103523 · Wire Drawing Machine
HERBORN - HG 10 - - 1971 -
Technical details
Vertical Wire Drawing Machine Drawing Machine Construction: Herborn Type: HG 10 Year: 1971 (renovated in 2006) Working range: max. 16 mm Ø working with steel max. 26 mm Ø working with copper (produced last round and square) drawing force: 10 tons drum diabmeter: 700 mm drawing speed: max. 100 m/min frequency controlled Main motor: 380-420V, 50Hz, 75kW complete electrics 2006 with Siemens S7 control
Folding tag pointer
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-103419 · Folding tag pointer
KROLLMANN - HRA 30/20-3 - - 1981 -
Technical details
Hydraulic tube-pointing press with notching device Constr. Krollmann Type. HRA 30 / 20-3 Year. 1981 The pointing press is for the production of drawing-out devices of tubes Max. Outside Ø of the tube 30 mm Pressure force. 00 kN at 250 bar Tool length. 250 mm Hydraulic drive. 5.5kW, 1500 rev / min Operating voltage. 500V AC, 50Hz Total weight of the system. about 1.6 tons.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-103418 · Folding tag pointer
KROLLMANN - HRA 30/20-3 - - 1981 -
Technical details
Hydraulic tube-pointing press with notching device Fabr. Krollmann Type. HRA 30 / 20-3 Year. 1981 The pointing press is for the production of drawing-out devices of tubes Max. Outside Ø of the tube 30 mm Pressure force. 00 kN at 250 bar Tool length. 250 mm Hydraulic drive. 5.5kW, 1500 rev / min Operating voltage. 500V AC, 50Hz Total weight of the system. about 1.6 tons.
Draw bench
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403524 · Draw bench
Haginger - 250/3 - - 1981/2006 -
Technical details
Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min Pre-tube 12.5 meter Drawing length: max. 15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.
Pointer
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403780 · Pointer
KROLLMANN - Flachanwalzen - - ca. 1978 -
Technical details
Pointing roller for flat material Fabr. Krollmann max.material thickness 24 mm Usable width 3 times 170 mm with two scissors Main drive 400V, 11 kW, 50 Hz
Profilo del commerciante: Franz Teutenberg GmbH & Co KG
Contatta Trader
Sul canale settentrionale 34-36
47877 - Villich
Germania
02154 95790 "> 02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Profilo di Trader
Franz Teutenberg-Maschinen GmbH & Co KG
La nostra azienda Franz Teutenberg GmbH & Co KG è stata fondata nel 1966 e da allora è specializzata nel commercio di macchine usate e impianti per laminatoi, semifinitori e trafilerie che lavorano su filo, barre, lamiera e lamiera, nastri e tubi.
Disponiamo di più di macchine speciali 100 su una superficie di circa 3.000 mq.
Siamo in grado di offrirvi macchine nuove o poco usate che sono state vendute dai loro precedenti proprietari a causa di misure di riorganizzazione o di proprietà di falliti. Disponiamo inoltre di vecchi macchinari e impianti di produzione per scopi speciali che possono ancora offrire molti anni di servizio, consentendo così di ottenere un notevole risparmio in termini di spese in conto capitale.
Inoltre, offriamo anche la mediazione:
- di nuove macchine
- di revisione delle macchine
- di riparazione o ammodernamento di macchine.
Indirizzo
Franz Teutenberg GmbH & Co KG
Sul canale settentrionale 34-36
D-47877 Willich
(Aeroporto di Düsseldorf)
Come trovarci
Potete raggiungerci tramite A 52 in direzione di Düsseldorf come segue: Esci a Willich Schiefbahn, a sinistra. Fino al prossimo semaforo, giusto. Segui la strada principale, 2. Strada a sinistra (= Am Nordkanal).
Potete raggiungerci via A 52 verso Mönchengladbach come segue: Esci da Willich Schiefbahn, a destra. Fino al prossimo semaforo, giusto. Segui la strada principale, 2. Strada a sinistra (= Am Nordkanal).
Am Nordkanal 34-36
Contact Trader
Am Nordkanal 34-36
47877 - Willich
Deutschland
02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Contact person: