,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          SKM Industriemaschinen - Stockist for used machines

          Machinelist:


          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe MAIER ML32 F1 Proline


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1732 · Turning Automatic Lathe - swiss lathe

          MAIER - ML32 F1 Proline - - 2006 - GE FANUC MAIER PRO

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 450 mm︱Control GE FANUC MAIER PRO ︱total power requirement kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,4 x 1,6 x 2,3 m m︱
          Switch-on time: 70,076 hours. Automatic time: 40,135 hours. Counter spindle available (see pictures) Machine was converted for spindle production (see loading magazine), dismantling According to the previous owner, this was easily possible. Machine brings alarms (see pictures)
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 450 mm
            Control GE FANUC MAIER PRO
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2,4 x 1,6 x 2,3 m m
            Description :
            Switch-on time: 70,076 hours.
            Automatic time: 40,135 hours.

            Counter spindle available (see pictures)
            Machine was converted for spindle production (see loading magazine), dismantling
            According to the previous owner, this was easily possible.
            Machine brings alarms (see pictures)
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine HESSAPP DVH 450e


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1745 · Vertical Turning Machine

          HESSAPP - DVH 450e - - 2005 - FANUC 21i-TB

          Technical details
          turning diameter 450 mm︱swing diameter 510 mm︱turning height 450 mm︱Control FANUC 21i-TB ︱total power requirement 40 kW︱weight of the machine ca. 13,5 t︱dimensions of the machine ca. LTH 6,2 x 2,7 x 3,2 m︱
          incl. magazine incl. chip conveyor incl. driven tools
            turning diameter 450 mm
            swing diameter 510 mm
            turning height 450 mm
            Control FANUC 21i-TB
            total power requirement 40 kW
            weight of the machine ca. 13,5 t
            dimensions of the machine ca. LTH 6,2 x 2,7 x 3,2 m
            Description :
            incl. magazine
            incl. chip conveyor
            incl. driven tools
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C ACIERA 23 TR 50/51


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1719 · Drilling and Milling M/C

          ACIERA - 23 TR 50/51 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 28 mm︱x-travel 400 mm︱y-travel 285 mm︱turning speeds 45-4000 U/min︱total power requirement 3,6 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. LBH 2,0 x 1,4 x 2,1 m︱
          - POS+MAT table - ALBRECHT tool quick change system - Vices
            bore capacity in steel (diameter. 28 mm
            x-travel 400 mm
            y-travel 285 mm
            turning speeds 45-4000 U/min
            total power requirement 3,6 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. LBH 2,0 x 1,4 x 2,1 m
            Description :
            - POS+MAT table
            - ALBRECHT tool quick change system
            - Vices
          Datasheet
          Request / Contact

          Cold Circular Saw

          used  Cold Circular Saw Fabris Italy Dico 350


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1743 · Cold Circular Saw

          Fabris Italy - Dico 350 - - 2001 -

          Technical details
          saw blade diameter 350 x 4,0 x 25,4 mm mm︱cutting diameter 120 mm︱weight of the machine ca. 150 kg︱speeds 4400 U/min︱voltage 400 V︱total power requirement 5,5 kW︱dimensions of the machine ca. TBH 1,3 x 1,0 x 1,8 m︱
          • Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel) • Miter cut • Robust commercial and industrial design • Separation area max. 140x90 mm • Cutting disc diameter 350 mm x 4.0 x 25.4 mm • Power machine with (5.5 KW) 5,500 W drive cable, • Includes 3 pieces of cutting discs
            saw blade diameter 350 x 4,0 x 25,4 mm mm
            cutting diameter 120 mm
            weight of the machine ca. 150 kg
            speeds 4400 U/min
            voltage 400 V
            total power requirement 5,5 kW
            dimensions of the machine ca. TBH 1,3 x 1,0 x 1,8 m
            Description :
            • Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel)
            • Miter cut
            • Robust commercial and industrial design
            • Separation area max. 140x90 mm
            • Cutting disc diameter 350 mm x 4.0 x 25.4 mm
            • Power machine with (5.5 KW) 5,500 W drive cable,
            • Includes 3 pieces of cutting discs

          Datasheet
          Request / Contact

          Thread Rolling Machine

          used  Thread Rolling Machine PROFIROLL PW 10e  PRS


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1749 · Thread Rolling Machine

          PROFIROLL - PW 10e PRS - - 2002 - SIEMENS SIMATIC

          Technical details
          pressure 10 t︱max. workpiece diameter 2-50 mm︱threading length mm︱Control SIEMENS SIMATIC ︱total power requirement 12 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. LTH 1,3 x 1,5 x 1,6 m︱
          Roller stroke 80mm smallest/largest center distance d. Rolling spindles 117/197 mm Rolling spindle height above Machine bed 160 mm max. tool diameter 175 mm Mounting diameter of the rolling spindle 54 mm Recording length of the rolling spindle 75 mm Swivel angle of the rolling spindle -/+ 10 degrees Rolling spindle speed (infinitely variable) rpm 10-100 Motor for roller spindle drive 7.5 KW Accessories/equipment - 13 sets of thread rolls in total (2 x set M4x0.7, 2 x set M6x1.00, 3 x set M8x1.00, 5 x set M8x1.25, 1 set M12x1.00) - Work light - Process lubrication - Central lubrication - Foot pedal - technical documentation
            pressure 10 t
            max. workpiece diameter 2-50 mm
            Control SIEMENS SIMATIC
            total power requirement 12 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. LTH 1,3 x 1,5 x 1,6 m
            Description :
            Roller stroke 80mm
            smallest/largest center distance d. Rolling spindles 117/197 mm
            Rolling spindle height above Machine bed 160 mm
            max. tool diameter 175 mm
            Mounting diameter of the rolling spindle 54 mm
            Recording length of the rolling spindle 75 mm
            Swivel angle of the rolling spindle -/+ 10 degrees
            Rolling spindle speed (infinitely variable) rpm 10-100
            Motor for roller spindle drive 7.5 KW

            Accessories/equipment
            - 13 sets of thread rolls in total
            (2 x set M4x0.7, 2 x set M6x1.00, 3 x set M8x1.00, 5 x set M8x1.25, 1 set
            M12x1.00)
            - Work light
            - Process lubrication
            - Central lubrication
            - Foot pedal
            - technical documentation

          Datasheet
          Request / Contact

          Eccentric Press - Double Column

          used  Eccentric Press - Double Column VOLLMER KE 563_30G


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1681 · Eccentric Press - Double Column

          VOLLMER - KE 563_30G - - 2011 - Touch

          Technical details
          press capacity 50 KN︱strokes - infinitely variable max. 100 Hub/min︱table-size 550 x 500 mm︱distance between columns 370 x 320 mm︱height of stroke 30 mm︱Control Touch ︱air pressure - required 6 bar︱voltage 380 V︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 2,55 x 1,00 x 2,10 (2,6) m︱
          Built-in tool 220 x 230 mm height 75 mm + 60 mm
            press capacity 50 KN
            strokes - infinitely variable max. 100 Hub/min
            table-size 550 x 500 mm
            distance between columns 370 x 320 mm
            height of stroke 30 mm
            Control Touch
            air pressure - required 6 bar
            voltage 380 V
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 2,55 x 1,00 x 2,10 (2,6) m
            Description :
            Built-in tool 220 x 230 mm height 75 mm + 60 mm
          Datasheet
          Request / Contact

          coil line

          used  coil line DREHER 1676 AV-RA2 / 2370 B


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1740 · coil line

          DREHER - 1676 AV-RA2 / 2370 B - - 1995 -

          Technical details
          material width 200 mm︱coil weight 1,5 t︱material thickness 0,8 - 4,2 mm︱straightening roll diameter 80 mm︱Number of straightening rolls 7 Pcs.︱
          Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available
            material width 200 mm
            coil weight 1,5 t
            material thickness 0,8 - 4,2 mm
            straightening roll diameter 80 mm
            Number of straightening rolls 7 Pcs.
            Description :
            Coil turner 2370 B
            Load capacity 1.5 ton.
            Bandwidth 300 mm
            Coil inner diameter: 400 - 500 mm
            Arm length per arm: 670 mm
            Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm
            Weight: 760 kg.

            Straightener Dreher 1676 AV-RA2
            Material width: 200 mm
            Material thickness: 08 - 4.2 mm
            Number of straightening rollers: 7
            Number of pull rollers: 4
            Straightening rollers diameter: 80 mm

            Would be down by a running press
            Documents circuit diagrams, operating instructions etc. available
          Datasheet
          Request / Contact

          Flanging and Seam Rolling Machine

          used  Flanging and Seam Rolling Machine BENDMAK SW 125 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1044 · Flanging and Seam Rolling Machine

          BENDMAK - SW 125 man. - - 2018 -

          Technical details
          plate thickness 1,25 mm︱Shank diameter 26 mm︱weight of the machine ca. 50 kg︱
          Sheet thickness: 1.25 mm Roller shaft color: 62 mm Roller center distance: 250 mm Shaft-Ø: 26 Throat Depth: 260 mm Dimensions of the Machine: Length: 600 mm Height: 550 mm Width: 350 mm Weight: about 50 kg incl. standard rolls
            plate thickness 1,25 mm
            Shank diameter 26 mm
            weight of the machine ca. 50 kg
            Description :
            Sheet thickness: 1.25 mm
            Roller shaft color: 62 mm
            Roller center distance: 250 mm
            Shaft-Ø: 26
            Throat Depth: 260 mm

            Dimensions of the Machine:
            Length: 600 mm
            Height: 550 mm
            Width: 350 mm

            Weight: about 50 kg

            incl. standard rolls
          Datasheet
          Request / Contact
          used  Flanging and Seam Rolling Machine SAHINLER IK 0,8 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1041 · Flanging and Seam Rolling Machine

          SAHINLER - IK 0,8 man. - - 2017 -

          Technical details
          plate thickness 0,8 mm︱0 52 mm︱weight of the machine ca. 30 kg︱
          Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard
            plate thickness 0,8 mm
            0 52 mm
            weight of the machine ca. 30 kg
            Description :
            Producer: Sahinler
            Type: IK 0,8
            YOM: new
            Shaft Length: 110 mm
            Bordering Capacity: 0,8 mm
            Roll-Ø: 52 mm
            Throat Depth: 80 mm
            Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm
            Weight: 30 kg


            Additional information:

            • Cast iron heavy duty main frame

            • Forward-backward adjustable sheet support

            • Easy to carry for workshops

            • Forward-backward adjustable bottom shaft

            • Rolls shafts are special steel material

            • 7 set of rolls standard
          Datasheet
          Request / Contact
          used  Flanging and Seam Rolling Machine SAHINLER IK 1,2 man.


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1042 · Flanging and Seam Rolling Machine

          SAHINLER - IK 1,2 man. - - 2017 -

          Technical details
          plate thickness 1,2 mm︱0 62 mm︱weight of the machine ca. 50 kg︱
          Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard
            plate thickness 1,2 mm
            0 62 mm
            weight of the machine ca. 50 kg
            Description :
            Producer: Sahinler
            Type: IK 1,2
            YOM: new
            Shaft Length: 140 mm
            Bordering Capacity: 1,2 mm
            Roll-Ø: 62 mm
            Throat Depth: 100 mm

            Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm
            Weight: 50 kg


            Additional information:

            • Cast iron heavy duty main frame

            • Forward-backward adjustable sheet support

            • Easy to carry for workshops

            • Forward-backward adjustable bottom shaft

            • Rolls shafts are special steel material

            • 7 set of rolls standard
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used  Hydr. pressbrake TECMASCHIN APH630


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1747 · Hydr. pressbrake

          TECMASCHIN - APH630 - - 2021 - E21

          Technical details
          pressure 63 t︱chamfer lenght 3200 mm︱distance between columns 2500 mm︱Control E21 ︱stroke - max. 320 mm︱stroke 120 mm︱throat 250 mm︱back stop - adjustable 500 mm︱total power requirement 5,5 kW︱weight of the machine ca. 4,0 t︱dimensions of the machine ca. LBH 3,20 x 1,30 x 2,21 m︱
          including upper tool including die Bending capacity steel: 2.5 mm to 3,200 mm *Machine may not comply with current UVV guidelines* *We expressly point out that we assume no responsibility for this* *Machine is sold as is*
            pressure 63 t
            chamfer lenght 3200 mm
            distance between columns 2500 mm
            Control E21
            stroke - max. 320 mm
            stroke 120 mm
            throat 250 mm
            back stop - adjustable 500 mm
            total power requirement 5,5 kW
            weight of the machine ca. 4,0 t
            dimensions of the machine ca. LBH 3,20 x 1,30 x 2,21 m
            Description :
            including upper tool
            including die

            Bending capacity steel: 2.5 mm to 3,200 mm

            *Machine may not comply with current UVV guidelines*
            *We expressly point out that we assume no responsibility for this*
            *Machine is sold as is*
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic ATLANTIC / HACO XTSL 3000


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1735 · Plate Shear - Hydraulic

          ATLANTIC / HACO - XTSL 3000 - - 1995 - SC5

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱Control SC5 ︱back stop - adjustable 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. LTH 3,8 x 2,5 x 1,7 m︱
          - motorized backgauge - Electric cutting gap adjustment - electric Cutting angle adjustment - Footswitch - Front support arms 2.60 m. - pneumatic lifting device - Spare knife - Rear area monitoring optical sensor
            sheet width 3050 mm
            plate thickness 6 mm
            Control SC5
            back stop - adjustable 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. LTH 3,8 x 2,5 x 1,7 m
            Description :
            - motorized backgauge
            - Electric cutting gap adjustment
            - electric Cutting angle adjustment
            - Footswitch
            - Front support arms 2.60 m.
            - pneumatic lifting device
            - Spare knife
            - Rear area monitoring optical sensor
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used  Plate Shear - Mechanical OSTAS RGM 1550 x 3


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1144 · Plate Shear - Mechanical

          OSTAS - RGM 1550 x 3 - - 2019 -

          Technical details
          sheet width 1550 mm︱plate thickness 3 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm︱
          Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting
            sheet width 1550 mm
            plate thickness 3 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm
            Description :
            Producer: OSTAS
            Type: RGM 1050 x 3
            YOM: new

            Max. Shearing Length: 1.050 mm
            Shearing Capacity: 3 mm
            Shearing Angle: 2°30'
            Strokes Per Minute: 35 d/d

            Motor Power: 3 kW
            Table Width: 510 mm
            Table Height: 820 mm
            Rear Gauge Distance: 500 mm
            Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm
            Weight: ca. 1.100 kg


            Additional information:

            • Manual backgauge with 500 mm stroke

            • Squaring arm with T-slot, stopper and ruler

            • Foot pedal

            • Front sheet holding arms

            • Cutting line lighting

            • Protection Cages




            optional:

            • Cutting unit counter
            • Motorised backgauge with 500 mm stroke
            • Backgauge with NC control
            • Pneumatic Sheet Support System
            • Optical security bar
            • 0-180° angle cutting
          Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used  Tryout Press - hydraulic HIDROLIKSAN HD 200


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1142 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 200 - - 2021 -

          Technical details
          pressure 200 t︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2300 kg︱dimensions of the machine ca. 2.000 x 1.200 x 2.800 mm︱Control
          Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark
            pressure 200 t
            stroke 400 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2300 kg
            dimensions of the machine ca. 2.000 x 1.200 x 2.800 mm
            Description :
            Producer: HIDROLIKSAN
            YOM: new
            Type: HD 160
            Thrust: 160 ton.
            Stroke: 400 mm
            Throat depth: 480 mm
            Total power requirement: 5,5 kW
            Distance between frames: 1.200 mm
            Cylinder-Ø: 120 mm
            Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm
            Weight: 1.400 kg

            Additional information:
            • solid, welded construction
            • pressure cylinder lateral adjustable
            • operating electrical per switch lever /
            • pressure indication per Manometer
            • material support per cylinder, adjustable in height
            • CE-mark
          Datasheet
          Request / Contact

          Rotary Welding Table

          used  Rotary Welding Table BENDMAK SRP 015


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1061 · Rotary Welding Table

          BENDMAK - SRP 015 - - 2014 -

          Technical details
          table load 150 kg︱weight of the machine ca. 250 kg︱dimensions of the machine ca. 800 x 700 x 950 mm︱
          Exhibit Machine Producer: BENDMAK Type: SRP 015 Load capacity: 150 kg Load center: 100 mm Eccentricity: 100 mm Rotation of the turntable: 360° Strongest inclination: 90° Input Power: 380 V Rotary motor: 0,18 kW tilt motor: 0,25 kW Speed: 1,4 m/min Slew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mm Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm Weight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air cooling
            table load 150 kg
            weight of the machine ca. 250 kg
            dimensions of the machine ca. 800 x 700 x 950 mm
            Description :
            Exhibit Machine

            Producer: BENDMAK
            Type: SRP 015
            Load capacity: 150 kg
            Load center: 100 mm
            Eccentricity: 100 mm
            Rotation of the turntable: 360°
            Strongest inclination: 90°
            Input Power: 380 V
            Rotary motor: 0,18 kW
            tilt motor: 0,25 kW
            Speed: 1,4 m/min
            Slew: 30 sek.
            Table-Ø: 500 mm
            T-Slots: 5-72
            Height in horizontal rotation: 700 mm

            Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm
            Weight: ca. 250 kg
            Earthing: 300 Amp.

            Additional information:
            - adjustable speeds
            - control panel with 5 m cable
            - digital speed indicator on the control panel for monitoring the rotation
            - weld grounding mechanism
            - mechanical angle indicator
            - engine brake with air cooling
          Datasheet
          Request / Contact

          Rotary Welding Table - Round Surface

          used  Rotary Welding Table - Round Surface FRITZ WERNER Schweissdrehvorrichtung


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1060 · Rotary Welding Table - Round Surface

          FRITZ WERNER - Schweissdrehvorrichtung - - unbekannt -

          Technical details
          wheel diameter 900 mm︱depth 900 mm︱width 940 mm︱height 1.050 mm︱
          Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm
            wheel diameter 900 mm
            depth 900 mm
            width 940 mm
            height 1.050 mm
            Description :
            Disc-Ø: 900 mm
            Depth: 900 mm
            Height: 1.050 mm
            Width: 940 mm
          Datasheet
          Request / Contact

          Balancing Machine

          used  Balancing Machine SCHENCK HM 40/HM20 MOBIL


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1731 · Balancing Machine

          SCHENCK - HM 40/HM20 MOBIL - - 2012/ 2021 - CAP920

          Technical details
          workpiece weight 100 - 3.000 kg︱workpiece length 5.000 mm︱diameter 1.260 - 1.600 mm︱Control CAP920 ︱total power requirement 11 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 20" Container m︱
          Mobile balancing system "SCHENCK" for use anywhere in the world The balancing system is permanently installed in a 20" open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through which the container can be connected can be supplied with the required 380V voltage. The system has been approved by Schenck and test protocols are available On the following pages please find the specification for 1 Schenck balancing machine, type HM 40/HM 20 U/BU with measuring unit CAB 920 SmartTouch We like to give you some technical comments to this balancing machine. This machine exists in its basic version of a HM 40 U/BU. Additionally we are offering a special pair of add. pedestals type HM 20 which can be easily exchanged against the HM 40 pedestals. The HM 20 pedestals will enable you to accommodate also small pump rotors into the machine. The advantages are: only one machine base and end and belt drive with one electrical control (space cost-saving) The machine is installed in a open Top 20” Container as a safety enclosure. (space and cost-saving) The HM 40/20 U/BU covers a wide range of rotor types due to rotor weight, dimension and balancing tolerances. This may also require fiexibility in balancing speeds. Therefore we have quoted the machine together with an electrical drive with squirrel cage motor with frequency converter for variable speed. The offered measuring unit CAB 920 is a computerized high-end unit and especially developed to fulfil advanced balancing tasks. Data input is extremely simple through the "Easy Mode" guiding the Operator perfectly. Unbalance visualization is realized by big vector meter displays on a high contrast TFT colour monitor with touch screen function. The integrated Industrial PC runs the unique CAB 920 balancing software and provides access to the balancing Data for direct printouts or via PC network. CAB 920 can be adapted to specific needs by additional software packages. For quick and accurate finding of the angular position of the measured unbalance on the rotor by using the belt-drive the software extension 'angle indexing" is included in the delivery extent of both measuring units. When reaching the correet unbalance angle it will be displayed on the measuring unit. Due to the method of correction (grinding at a [arger surface area) the vector indication is of advantage. Machine mode: HM 40/20 U/BU Year of manufacturing: 2012/2021 Manufacturing number: RPHF02I7 Item Extent of delivery Pair Bearing Pedestals HM 40 Rotor weight for symmetric bad 3000 kg for each bearing pedestal max. 1500 kg Largest rotor diameter above machine bed 1600 mm Distance between bearing centres (belt drive between pedestals) min. 155 mm upward static bearing loads for counter bearing with roller 3000 N Limit value of permanent calibration 710 x 1 0E6 kg/min' 1.1 1 Pair of Roller Bearing lnserts HM 40 adjustable for journal bearing diameters 1.2 1 Pair of Roller Bearing Inserts HM 40 adjustable for journal bearing diameters 1.3 1 Pair Bearing Pedestals HM 20 Rotor weight for symmetric bad for each bearing pedestal max. Largest rotor diameter above machine bed Distance between bearing centres (left drive between pedestals) upward static bearing loads for counter bearing with roller Limit value of permanent calibration 1 Pair of Roller Bearing lnserts adjustable for journal bearing diameters 9-70 mm 1 Pair of Roller Bearing lnserts adjustable for journal bearing diameters 70-140 mm 2 Set of counter bearings (Hold-down bracket) The balancing machine is equipped for safety reasons with one set of counter bearings size HM 40 and one set size HM 20 to absorb upward bearing loads. The counter bearings are hinged and tHting out of the way for easy rotor loading and unboading. Each set is consisting of: - 1 x counter bearing with roh (negative bad bearing for overhanging rotors) - 1 x counter bearing with sliding piece 1.7 2 Axial thrust stops mounted on machine base Two axial thrust stops to be mounted on machine base for babancing big rotors in overhanging position. 2 1 Machine Bed with roller chain and two T-slots for moving the pedestals easily along the machine base bed Iength in total consisting of 5.000 mm 1 x3000mm, 1 x2000mm 3 1 Measuring Unit with: Operating System Windows 10 loT Enterprise 2016 LTSB - Direct data input without keyboard via Touch-Screen-Display - Easy Mode for simplified data input and display of results - Indication of the result via big vectormeter and numerical displays - Workshop tried and tested industrial PC - Easy data export via front side USB - Networking capability - Optimized signal processing for high accuracy via Schenck MMD-digital filter - Intelligent self-diagnostics of the measuring electronics - Modular, service friendly System design - Operation using Windows standard procedures - Measurement of dynamic, static and couple unbalance - Optimised menu functions - Rotorfile Wizard - Possibility to connect drawings or instructions to rotor files - User level administration with individual profiles - Numerous software modules available - mcl. Software 'Tolerance Calculation to [SO 21940-11 - mcl. single, key- and index compensation - mdl. measurement during run-up - Advanced print manager - Log report in pdf format - Archiving in measurement value database in MS-Excel compatible format - User dialog can be selected between English/German Measuring range 100 – 5000 rpm Minimum achievable residual unbalance (Umar) acc. ISO 2953 for each plane per kg rotor weight with belt-drive 0.1 gmm/kg with end-drive 0.5 gmm/kg but for HM 20 pedestals not less than 0.8 gmm but for HM 40 pedestals not less than 4.0 gmm Value refers to the measuring speed of 1000 rpm Unbalance reduction ratio (URR) up to 95% 3.1 1 Indexing manually to exactly transfer the measured unbalance angle to the rotor (manual indexing). 3.2 1 Software "Rotorspecific Calibration" Our optional Rotor Specific Calibration software allows a "fine tuning" of the machine to compensate for balancing tooling whose dynamic stiffness is insufficient. The Rotor Specific Calibration software will improve the ability to transpose the bearing plane measurements to the correction planes (plane separation). Rotor Specific Calibration should be used when a ]arge cross effect is noted between correction planes separated by a small distance. Rotor Specific Calibration is also useful when the result of rotor weight and balance speed approaches or slightly exceeds the weight-speed squared (Wn2) rating of the machine, or when the rotor deforms while balancing (e.g., fan blades with variable pitch). Balancing machines employing offset roller bearings, which significantly affect the stiffness of the support bearing system, will also benefit from the employment of Rotor Specific Calibration. 4 1 End Drive U2 Drive power 7.5 kW Balancing speed 1. gear 60 - 580 rpm Balancing speed 2. gear 110- 1120 rpm Drive shafts Drive Shaft 250 Nm , Drive Shaft 80 Nm 4.1 1 Rotor locking device - end drive 4.2 1 Belt drive BU 4/5 Drive power 7.5 kW Belt driven diameter 20 - 600 mm Balancing speeds based upon 100 mm belt driven diameter: 140- 1460 rpm, 200-2000 rpm, 350 - 3640 rpm 4.3 1 Rotor locking device - belt drive 5 1 Electrical drive and control for variable balancing speed, consisting of: control cabinet prepared for installation of the measuring unit with: - frequency converter for speed setting range 1 : 10 and energetic recovery system - operation devices and contactors
            workpiece weight 100 - 3.000 kg
            workpiece length 5.000 mm
            diameter 1.260 - 1.600 mm
            Control CAP920
            total power requirement 11 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 20" Container m
            Description :
            Mobile balancing system "SCHENCK" for use anywhere in the world

            The balancing system is permanently installed in a 20" open-top container.
            The container is equipped with everything you need for balancing

            • Lighting
            • Metal base plate 12,000 kg as a base plate for accuracy
            • Compressor for working air supply distributed in the container
            • Compressed air connections.
            • A circumferential power strip
            • A tool cabinet equipped with tools
            • A hydraulic lifting device for aligning the container from the outside
            • In addition to a tarpaulin for the roof, the container also comes with
            movable roof segments made of sheet metal.
            • The container has a central plug through which the container can be connected
            can be supplied with the required 380V voltage.

            The system has been approved by Schenck and test protocols are available

            On the following pages please find the specification for
            1 Schenck balancing machine, type HM 40/HM 20
            U/BU with measuring unit CAB 920 SmartTouch

            We like to give you some technical comments to this balancing machine.
            This machine exists in its basic version of a HM 40 U/BU. Additionally we are
            offering a special pair of add. pedestals type HM 20 which can be easily
            exchanged against the HM 40 pedestals. The HM 20 pedestals will enable you to
            accommodate also small pump rotors into the machine.

            The advantages are: only one machine base and end and belt drive with one
            electrical control (space cost-saving)
            The machine is installed in a open Top 20” Container as a safety enclosure.
            (space and cost-saving)

            The HM 40/20 U/BU covers a wide range of rotor types due to rotor weight,
            dimension and balancing tolerances. This may also require fiexibility in
            balancing speeds.

            Therefore we have quoted the machine together with an electrical drive with
            squirrel cage motor with frequency converter for variable speed.

            The offered measuring unit CAB 920 is a computerized high-end unit and
            especially developed to fulfil advanced balancing tasks. Data input is
            extremely simple through the "Easy Mode" guiding the Operator perfectly.
            Unbalance visualization is realized by big vector meter displays on a high
            contrast TFT colour monitor with touch screen function. The integrated
            Industrial PC runs the unique CAB 920 balancing software and provides access to
            the balancing Data for direct printouts or via PC network. CAB 920 can be
            adapted to specific needs by additional software packages.

            For quick and accurate finding of the angular position of the measured
            unbalance on the rotor by using the belt-drive the software extension 'angle
            indexing" is included in the delivery extent of both measuring units. When
            reaching the correet unbalance angle it will be displayed on the measuring unit.

            Due to the method of correction (grinding at a [arger surface area) the vector
            indication is of advantage.

            Machine mode: HM 40/20 U/BU
            Year of manufacturing: 2012/2021
            Manufacturing number: RPHF02I7
            Item Extent of delivery
            Pair Bearing Pedestals HM 40
            Rotor weight for symmetric bad 3000 kg
            for each bearing pedestal max. 1500 kg
            Largest rotor diameter above machine bed 1600 mm
            Distance between bearing centres (belt drive between pedestals) min. 155
            mm
            upward static bearing loads for counter bearing with roller 3000 N
            Limit value of permanent calibration 710 x 1 0E6 kg/min'

            1.1 1 Pair of Roller Bearing lnserts HM 40
            adjustable for journal bearing diameters

            1.2 1 Pair of Roller Bearing Inserts HM 40
            adjustable for journal bearing diameters
            1.3 1 Pair Bearing Pedestals HM 20
            Rotor weight for symmetric bad
            for each bearing pedestal max.
            Largest rotor diameter above machine bed
            Distance between bearing centres (left drive between pedestals)
            upward static bearing loads for counter bearing with roller
            Limit value of permanent calibration

            1 Pair of Roller Bearing lnserts
            adjustable for journal bearing diameters 9-70 mm
            1 Pair of Roller Bearing lnserts
            adjustable for journal bearing diameters 70-140 mm
            2 Set of counter bearings (Hold-down bracket)
            The balancing machine is equipped for safety reasons with one set of counter
            bearings size HM 40 and one set size HM 20 to absorb upward bearing loads. The
            counter bearings are hinged and tHting out of the way for easy rotor loading
            and unboading. Each set is consisting of:
            - 1 x counter bearing with roh (negative bad bearing for overhanging rotors)
            - 1 x counter bearing with sliding piece
            1.7 2 Axial thrust stops mounted on machine base
            Two axial thrust stops to be mounted on machine base for babancing big rotors
            in overhanging position.
            2 1 Machine Bed
            with roller chain and two T-slots for moving the pedestals
            easily along the machine base
            bed Iength in total
            consisting of 5.000 mm
            1 x3000mm, 1 x2000mm

            3 1 Measuring Unit
            with: Operating System Windows 10 loT Enterprise 2016 LTSB
            - Direct data input without keyboard via Touch-Screen-Display
            - Easy Mode for simplified data input and display of results
            - Indication of the result via big vectormeter and numerical displays
            - Workshop tried and tested industrial PC
            - Easy data export via front side USB
            - Networking capability
            - Optimized signal processing for high accuracy via Schenck MMD-digital filter
            - Intelligent self-diagnostics of the measuring electronics
            - Modular, service friendly System design
            - Operation using Windows standard procedures
            - Measurement of dynamic, static and couple unbalance
            - Optimised menu functions
            - Rotorfile Wizard
            - Possibility to connect drawings or instructions to rotor files
            - User level administration with individual profiles
            - Numerous software modules available
            - mcl. Software 'Tolerance Calculation to [SO 21940-11
            - mcl. single, key- and index compensation
            - mdl. measurement during run-up
            - Advanced print manager
            - Log report in pdf format
            - Archiving in measurement value database in MS-Excel compatible format
            - User dialog can be selected between English/German

            Measuring range
            100 – 5000 rpm
            Minimum achievable residual unbalance (Umar)
            acc. ISO 2953 for each plane per kg rotor weight
            with belt-drive 0.1 gmm/kg
            with end-drive 0.5 gmm/kg
            but for HM 20 pedestals not less than 0.8 gmm
            but for HM 40 pedestals not less than 4.0 gmm
            Value refers to the measuring speed of 1000 rpm
            Unbalance reduction ratio (URR) up to 95%

            3.1 1 Indexing manually
            to exactly transfer the measured unbalance angle to the rotor (manual indexing).

            3.2 1 Software "Rotorspecific Calibration"
            Our optional Rotor Specific Calibration software allows a "fine tuning" of the
            machine to compensate for balancing tooling whose dynamic stiffness is
            insufficient. The Rotor Specific Calibration software will improve the ability
            to transpose the bearing plane measurements to the correction planes (plane
            separation). Rotor Specific Calibration should be used when a ]arge cross
            effect is noted between correction planes separated by a small distance.
            Rotor Specific Calibration is also useful when the result of rotor weight and
            balance speed approaches or slightly exceeds the weight-speed squared (Wn2)
            rating of the machine, or when the rotor deforms while balancing (e.g., fan
            blades with variable pitch). Balancing machines employing offset roller
            bearings, which significantly affect the stiffness of the support bearing
            system, will also benefit from the employment of Rotor Specific Calibration.

            4 1 End Drive U2
            Drive power 7.5 kW
            Balancing speed 1. gear 60 - 580 rpm
            Balancing speed 2. gear 110- 1120 rpm
            Drive shafts Drive Shaft 250 Nm , Drive Shaft 80 Nm

            4.1 1 Rotor locking device - end drive

            4.2 1 Belt drive BU 4/5
            Drive power 7.5 kW
            Belt driven diameter 20 - 600 mm
            Balancing speeds based upon 100 mm belt driven diameter:
            140- 1460 rpm, 200-2000 rpm, 350 - 3640 rpm

            4.3 1 Rotor locking device - belt drive
            5 1 Electrical drive and control
            for variable balancing speed, consisting of:
            control cabinet prepared for installation of the measuring unit with:
            - frequency converter for speed setting range 1 : 10 and energetic
            recovery system
            - operation devices and contactors




          Datasheet
          Request / Contact

          Tool taper

          used  Tool taper KOCEL 2755


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1066 · Tool taper

          KOCEL - 2755 - - 2017 -

          Technical details
          width 500 mm︱height 300 mm︱depth 570 mm︱
          CNC-Table Attachment Frame Producer: KOCEL Type: 2755 YOM: new Width: 500 mm Depth: 570 mm Height: 300 mm Weight: ca. 9 kg Number of CNC-tool holder slots: 16 Colour: RAL 5015 blue Additional information: - Patented, innovative universal-plug-in system: - Size adjustment of the tool holder slots as required - So again and again possibility of newly arranged storage of 16 tool holders in this table attachment frame - Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40, HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly plug-in system, inconvenient and inflexible storage of different tool holders are a thing of the past. • The frame is a solid steel-sheet metal construction and was welded firmly No Tool Holders included!
            width 500 mm
            height 300 mm
            depth 570 mm
            Description :
            CNC-Table Attachment Frame

            Producer: KOCEL
            Type: 2755
            YOM: new
            Width: 500 mm
            Depth: 570 mm
            Height: 300 mm
            Weight: ca. 9 kg
            Number of CNC-tool holder slots: 16
            Colour: RAL 5015 blue


            Additional information:

            - Patented, innovative universal-plug-in system:
            - Size adjustment of the tool holder slots as required
            - So again and again possibility of newly arranged storage of 16 tool holders
            in this table attachment frame
            - Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40,
            HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly
            plug-in system, inconvenient and inflexible storage of different tool holders
            are a thing of the past.
            • The frame is a solid steel-sheet metal construction and was welded firmly

            No Tool Holders included!
          Datasheet
          Request / Contact

          Knote hole boring machine

          used  Knote hole boring machine MAKA STV - VZ - 71


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1746 · Knote hole boring machine

          MAKA - STV - VZ - 71 - - 1981 -

          Technical details
          Number of agregats 1 St.︱range L-W-H 1.350 x 1.200 x 1.200 mm︱weight 800 kg︱
            Number of agregats 1 St.
            range L-W-H 1.350 x 1.200 x 1.200 mm
            weight 800 kg
          Datasheet
          Request / Contact

          Suction device

          used  Suction device DIETZ DG 25


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1003 · Suction device

          DIETZ - DG 25 - - unbekannt -

          Technical details
          Dimensions (L/W/H) ca. 700 x 500 x 1.080 mm︱current intensivity 0,73 / 0,42 A︱weight ca. 80 kg︱
            Dimensions (L/W/H) ca. 700 x 500 x 1.080 mm
            current intensivity 0,73 / 0,42 A
            weight ca. 80 kg
          Datasheet
          Request / Contact

          Oven - Gas

          used  Oven - Gas THERMCRAFT 21560-801-00


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1715 · Oven - Gas

          THERMCRAFT - 21560-801-00 - - 1999 -

          Technical details
          0 1200 °C︱internal diameter 210 mm︱internal length of the oven 1000 mm︱total power requirement 25,2 kW︱weight of the machine ca. 0,55 t︱dimensions of the machine ca. BTH 1,3 x 1,6 x 1,8 m︱
          Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2
            0 1200 °C
            internal diameter 210 mm
            internal length of the oven 1000 mm
            total power requirement 25,2 kW
            weight of the machine ca. 0,55 t
            dimensions of the machine ca. BTH 1,3 x 1,6 x 1,8 m
            Description :
            Hochtemperatur ROHROFFEN - Labor
            Split - Tube Furnace
            Kelltool Furnace
            GAS H2 und N2
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profilo del commerciante: SKM Industriemaschinen

          Contatta Trader



            Macchine industriali SKM
           Röntgenstr. 3
            89264 - Corno bianco
            Germania
            + 49 (0) 7309 954 986 0 "> + 49 (0) 7309 954 986 0
            + 49 (0) 7309 954 986 1
            info@skm-maschinen.de
            www.skm-maschinen.de

          Profilo di Trader

          Benvenuti nella società SKM Industrial Machinery

          Con noi puoi fidarti di uno specialista. Siamo il vostro partner competente per macchine utensili usate e nuove. Offriamo la più ampia scelta, dalla semplice trapano da tavolo al complesso centro di tornitura dell'asse 7.

          Che si tratti di attrezzature nuove o usate, interventi di manutenzione, messa in servizio, pezzi di ricambio, organizzazione di smantellamento e trasporto, leasing e finanziamento - con SKM Industrial Machinery scegliete un partner competente e affidabile.

          Presso la nostra sede aziendale e sul nostro sito web è possibile trovare una affidabile tecnologia CNC usata per le proprie esigenze personali, indipendentemente dal fatto che si tratti del più preciso lavoro di foratura, fresatura, piegatura o tornitura. Naturalmente offriamo anche un servizio completo di ricambi per macchinari industriali. Offriamo consulenza indipendente dai fornitori su tutti gli aspetti delle macchine utensili.

          Indipendentemente dal fatto che stiate progettando un nuovo investimento, abbia problemi di produzione attuali o preferiate affidarvi a una macchina CNC usata di alta qualità.

          Macchine industriali SKM
          Röntgenstr. 3
          89264 Weissenhorn
          Germania

          Telefono: + 49 (0) 7309 / 954 986-0
          Fax: + 49 (0) 7309 / 954986-1

          E-mail : info@skm-maschinen.de
          www.skm-maschinen.de




          SKM Industriemaschinen   89264 - Weißenhorn Röntgenstr. 3 Deutschland
          SKM Industriemaschinen

          Röntgenstr. 3



          Contact Trader


            SKM Industriemaschinen
           Röntgenstr. 3
            89264 - Weißenhorn
            Deutschland
            +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
            info@skm-maschinen.de
            www.skm-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Absauggerät · Auswuchtmaschine · Bandanlage · Bohr- und Fräsmaschine · Exzenterpresse - Doppelständer · Gewinderollmaschine · Kaltkreissäge · Langdrehautomat · Ofen - Gas · Rohrbiegemaschine · Schweißdrehtisch · Schweißdrehtisch - rund · Sicken- und Bördelmaschine · Stemmmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Vertikaldrehmaschine · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugschränke ·