,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          MS Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled EMCO E 300-2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-160 · Lathe - cycle-controlled

          EMCO - E 300-2000 - - 2000 - FAGOR 8055

          Technical details
          turning diameter 340 mm︱turning length 2000 mm︱control FAGOR 8055 ︱swing diameter 550 mm︱spindle bore 108 mm︱spindle turning speed - stepless 2500 U/min︱power capacity 16.5 kW︱quill stroke 220 mm︱diameter of quill 100 mm︱total power requirement 19 kW︱weight of the machine ca. 4300 kg︱dimensions of the machine ca. 4300 x 1600 x 1800 m︱
          This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders
            turning diameter 340 mm
            turning length 2000 mm
            control FAGOR 8055
            swing diameter 550 mm
            spindle bore 108 mm
            spindle turning speed - stepless 2500 U/min
            power capacity 16.5 kW
            quill stroke 220 mm
            diameter of quill 100 mm
            total power requirement 19 kW
            weight of the machine ca. 4300 kg
            dimensions of the machine ca. 4300 x 1600 x 1800 m
            Description :
            This EMCO E 300x2000 cycle lathe is supplied complete with all accessories.
            Description:
            - Coolant device
            - 1 piece Luenette open 20-145mm
            - 1 piece closed guide 15-185mm
            - 1 piece face plate
            - 1 piece three-jaw chuck
            - 1 piece wedge bar chuck D=400mm
            - Parat 4-fold tool holder
            - Various tool holders
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-131 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2014 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱B-axis (table) +-100 °︱c-axis 360 °︱spindle turning speed range 0 - 15000 U/min︱tool taper ISO SK-40 ︱workpiece weight 250 kg︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 built in 2014: Machine hours 20,939 h Spindle hours 6,731 h Operating hours (machining) 5,042 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            B-axis (table) +-100 °
            c-axis 360 °
            spindle turning speed range 0 - 15000 U/min
            tool taper ISO SK-40
            workpiece weight 250 kg
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 built in 2014:
            Machine hours 20,939 h
            Spindle hours 6,731 h
            Operating hours (machining) 5,042 h
          Datasheet
          Request / Contact
          used  milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-132 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2012 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱tool taper ISO SK-40 ︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table - swivable +/- 100 °︱table rotating 360 °︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱workpiece weight 250 kg︱spindle turning speed range 0-15000 U/min︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 Bj. 2012: Maschinenstunden 19.125 h Spindelstunden 4.954 h Betriebsstunden (zerspanen) 3.483 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            tool taper ISO SK-40
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table - swivable +/- 100 °
            table rotating 360 °
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            workpiece weight 250 kg
            spindle turning speed range 0-15000 U/min
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 Bj. 2012:
            Maschinenstunden 19.125 h
            Spindelstunden 4.954 h
            Betriebsstunden (zerspanen) 3.483 h
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profilo del commerciante: MS Maschinenhandel GmbH

          Contatta Trader



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladi
            Austria
            + 43 547221907 "> + 43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at

          Profilo di Trader

          Gruppo ProdEq - Partner dell'industria.
          Commercio all'ingrosso di macchinari per la lavorazione dei metalli.
           
          Vendiamo e compriamo:
          • macchine utensili
          • macchinari per la produzione di metallo
          • attrezzatura industriale usata
          • completare le piante
          Internazionalità:
          Le nostre rete di vendita internazionale fornisce accesso ai mercati globali delle macchine usate / usate.


          Elenco dei macchinari online:
          Cerca e trova l'attrezzatura e la macchina utensile desiderate (CNC o non CNC) nella nostra directory online. Tutte le macchine in vendita sono pubblicate con informazioni complete.

          Grandi progetti - piccoli progetti:
          Realizziamo aste e liquidazioni e realizziamo le vendite delle vostre attrezzature in eccedenza. Vi preghiamo di contattarci in caso di vendite imminenti di attività in eccedenza. Commerciamo macchine singole così come impianti industriali completi.

          Competenza:
          Indipendentemente se vendi o acquisti macchine o attrezzature usate. Basare la vostra decisione di vendita sulla nostra valutazione e la vostra decisione di acquisto sulla nostra consulenza tecnica.

          Più che di seconda mano:
          Scambiamo anche un portafoglio selezionato di Nuove attrezzature, Basta chiedere a noi.


          Commercio e servizio:
          Richiedi servizi post vendita come smontaggio, revisione, trasporto, importazione ed esportazione e finanziamento.

          Equipaggiamento del macchinario:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Svizzera


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austria


          ProdEq Germany GmbH
          Weberweg 2, 42499 Hückeswagen, Germania


          Post-Venta Carreras SA
          Pol. Ind. Els Plans d'Arau, C / Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Spagna


          Guerrieri srl
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italia


          ProdEq doo Trgovina z industrijskimi stroji
          Opekarniska 4, 2327 Race, Slovenia


          Ufficio di rappresentanza ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Türkei


          Altri uffici di rappresentanza: Messico, Iran
          Per ulteriori informazioni, contattare uno degli uffici ProdEq di cui sopra.




          MS Maschinenhandel GmbH   6532 - Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Österreich
            +43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

            USt.Id.Nr.: ATU 62723057
          Firmenbuchnummer: FN 280087 v
          USt.Id.Nr.: DE 257366940 / Steuernummer: 182 / 123 / 26816
          EORI-Nr.: ATEOS1000012994





          Machine category


          Abkantpresse - hydraulisch · Bandsäge · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Brennschneidemaschine · CNC Dreh- und Fräszentrum · Doppel-Gehrungsäge · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Honmaschine - Innen - Horizontal · Kompressor · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Spritzgiessmaschine bis 5000 KN · Tafelschere - mechanisch · Tuschierpresse · Wasserstrahlschneidanlage · Werkzeug Voreinstellgerät ·