Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          FLECKENSTEIN Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SEIGER SLZ 1200


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1503 · Lathe - cycle-controlled

          SEIGER - SLZ 1200 - - 1999-2022 - SINUMERIK 840 D

          Technical details
          turning diameter 1.200 mm︱turning length 3.000 mm︱control SINUMERIK 840 D ︱working area ︱greates pass round over bed mm︱swing diameter over face slide mm︱cross movement. (x-axis) mm︱centre distance mm︱bed width mm︱feed drives kW︱feed Z-axis mm/min︱feed X-axis mm/min︱Feed force Z-axis kN︱Feed force Z-axis kN︱main spindle ︱spindle head mounting ︱spindle bore mm︱Spindle Ø in front bearing mm︱max. speed min-1︱max. torque Nm︱
          Accessories 1 pc. Manual clamping chuck Ø 630 mm SCHUNK ROTA S 1 pc. tool holder for boring bars with max. Ø 100 mm 2 pc. steady’s Ø area 100-800 mm coolant equipment 2 gear steps for main spindle chip conveyor with coolant tank The machine will be oberhauled with following scope of service: - dismantling of machine - cleaning all pieces - review of reusability - renew the two ballscrews, replace defective parts - geometrical overhaul of X and Z guide (re-grinding of guides, renewal of sliding coatings) - repainting machine (roller painting) with 2 components DD varnish (machine varnish) - assembly of the machine with put into operation for demonstration in our warehouse Kleinostheim
            turning diameter 1.200 mm
            turning length 3.000 mm
            control SINUMERIK 840 D
            Description :
            Accessories
            1 pc. Manual clamping chuck Ø 630 mm SCHUNK ROTA S
            1 pc. tool holder for boring bars with max. Ø 100 mm
            2 pc. steady’s Ø area 100-800 mm
            coolant equipment
            2 gear steps for main spindle
            chip conveyor with coolant tank

            The machine will be oberhauled with following scope of service:
            - dismantling of machine
            - cleaning all pieces
            - review of reusability
            - renew the two ballscrews, replace defective parts
            - geometrical overhaul of X and Z guide (re-grinding of guides, renewal of
            sliding coatings)
            - repainting machine (roller painting) with 2 components DD varnish (machine
            varnish)
            - assembly of the machine with put into operation for demonstration in our
            warehouse Kleinostheim



          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DANOBAT VTC-2800


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1631 · Vertical Turret Lathe - Single Column

          DANOBAT - VTC-2800 - - 2010 - SINUMERIK 840 D

          Technical details
          faceplate diameter 2.800 mm︱swing diameter 3.000 mm︱turning height 2.000 mm︱control SINUMERIK 840 D ︱mac. high under RAM 2.200 mm︱travel crossbar 1.200 mm 6 x 200 mm ︱travel RAM (Z-axis) 1.500 mm︱travel X-axis 4.960m mm︱ - ︱power capacity at 100 % load 55 kW︱faceplate diameter 2.400 mm︱max. speed 200 min-1︱max. workpiece weight 25.000 kg︱max. torque 39.000 Nm︱Number of gear stages 2 ︱Inner Ø of the front bearing 1.028,7 mm︱Measuring system in table direkt ︱c-axis - ︱max. torque 51.500 Nm︱speed area 0,02 - 2 min-1︱
          Equipment and accessories Faceplate drive, power 55 kW CNC control SINUMERIK 840D all drives in digital servo technology make SIEMENS, SIMODRIVE 611 digital linear measuring systems in X- and Z-axis, lock ventilated Coolant system incl. belt filter system and magnetic separator, tank volume 2,000 liters, two pumps with separate circuits High pressure pump 40l/min, low pressure pump 100l/min Outlet at RAM via shower rim and internal coolant supply line 1 piece tool and head magazine Chip conveyor with separate coolant tank 450l and feed pump Central hydraulic unit C-axis by means of swing-in servo motor and backlash-free reduction gear, acting directly on the gear rim Vertically adjustable cross beam - 1,200 mm (6 x 200 mm - hydraulically clamped and mechanically locked) Open top enclosure with manually operated doors 1 piece face plate Ø 2.400 mm axial milling head SK 50, 3.000 min-1, automatically changeable, grinding function Radial milling head 90° SK 50, 3.000 min-1, automatically interchangeable Tool holder 40x40 for standard tools Electronic handwheel SIEMENS 3-D measuring probe Machine light in the working area
            faceplate diameter 2.800 mm
            swing diameter 3.000 mm
            turning height 2.000 mm
            control SINUMERIK 840 D
            mac. high under RAM 2.200 mm
            travel crossbar 1.200 mm 6 x 200 mm
            travel RAM (Z-axis) 1.500 mm
            travel X-axis 4.960m mm
            -
            power capacity at 100 % load 55 kW
            faceplate diameter 2.400 mm
            max. speed 200 min-1
            max. workpiece weight 25.000 kg
            max. torque 39.000 Nm
            Number of gear stages 2
            Inner Ø of the front bearing 1.028,7 mm
            Measuring system in table direkt
            c-axis -
            max. torque 51.500 Nm
            speed area 0,02 - 2 min-1
            Description :
            Equipment and accessories
            Faceplate drive, power 55 kW
            CNC control SINUMERIK 840D
            all drives in digital servo technology make SIEMENS, SIMODRIVE 611 digital
            linear measuring systems in X- and Z-axis, lock ventilated
            Coolant system incl. belt filter system and magnetic separator, tank volume
            2,000 liters,
            two pumps with separate circuits
            High pressure pump 40l/min,
            low pressure pump 100l/min
            Outlet at RAM via shower rim and internal coolant supply line
            1 piece tool and head magazine
            Chip conveyor with separate coolant tank 450l and feed pump
            Central hydraulic unit
            C-axis by means of swing-in servo motor and backlash-free reduction gear,
            acting directly on the gear rim
            Vertically adjustable cross beam - 1,200 mm (6 x 200 mm - hydraulically clamped
            and mechanically locked)
            Open top enclosure with manually operated doors
            1 piece face plate Ø 2.400 mm
            axial milling head SK 50, 3.000 min-1, automatically changeable, grinding
            function
            Radial milling head 90° SK 50, 3.000 min-1, automatically interchangeable
            Tool holder 40x40 for standard tools
            Electronic handwheel SIEMENS
            3-D measuring probe
            Machine light in the working area

          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C Castel GREEN 1T4


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1622 · Drilling and Milling M/C

          Castel - GREEN 1T4 - - 1997 -

          Technical details
          bore capacity in steel (diameter) 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱
          Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
            bore capacity in steel (diameter. 110 mm
            x-travel 2.100 mm
            y-travel 1.500 mm
            z-travel 1.000 mm
            w-travel 500
            control HEIDENHAIN TNC 430
            Working Spindle -
            boring quill diameter 110 mm
            spindle taper DIN 69871 ISO 50
            spindle power 22 kW
            transmission ratio 2
            turning speed range 2.000 U/min
            clamping table -
            max. workpiece weight 4.000 kg
            surface area 1.100 x 1.300 mm
            feed range X-, Y-, Z- axis 0 – 10.000 mm/min
            feed range W-axis 0 - 10.000 mm/min
            rapid motion - x-axis 10.000 mm/min
            Description :
            Equipment.
            • CNC-control HEIDENHAIN 430
            • support bearing
            • manual milling head
            • coolant tank with pump


          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine UNION TC 130


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1610 · Table Type Boring and Milling Machine

          UNION - TC 130 - - 2004-2022 - HEIDENHAIN iTNC 530

          Technical details
          spindle diameter 130 mm︱x-travel 2.500 mm︱y-travel 2.000 mm︱z-travel 1.500 mm︱w-travel 750 ︱control HEIDENHAIN iTNC 530 ︱bore capacity in steel (diameter) 130 mm︱B-axis rotary movement table 360 Grad︱b-axis, positioning accuracy 360.000 x 0,001 °︱Machining unit - ︱fixed spindle nosing, length 370 mm︱fixed spindle nosing, diameter 280 mm︱lowest position above table surface 0 mm︱Tool holder (short taper according to DIN 69871) ISO 50 ︱drive power S1 (100%) 37/51 kW︱max. torque at the spindle 2.415 Nm︱Drive power S1 (100%) / S2 (30min) 5- 3.000 min-1︱1st gear stage 5 - 782 min-1︱2nd gear stage 783 - 3.000 min-1︱Nc rotary table -
          Scope of retrofit and supply • CNC drilling and milling machine with spindle Ø 130mm in horizontal execution • tool magazine with 40 places and automatic tool changer – fully overhauled • 3 pcs. chip conveyor • Ball screws and bearings in X, Y, Z and W axis - NEW • Guide rails and roller shoes in X, Y, Z and W axis – NEW • Spindle and quill bearings - NEW • Tool clamping unit – fully overhauled by the manufacturer • Measuring systems cleaned, checked and partially replaced by new components • Machine completely checked mechanically and electrically • Largely new cables • Energy guiding chains - NEW • Telescopic covers – fully refurbished • Bellows in the vertical axis - NEW • New machine coating in two-layer structure with oil-resistant and abrasion-resistant two-component paints • Swamp pump Additional scope of delivery possible in EU upon request • Delivery free to your factory • Geometrical set-up, installation and commissioning • Laser measurement with compensation of the measuring systems • New working chamber enclosure, individually manufactured • New coolant system with filter unit for internal and external cooling 20/8 bar
            spindle diameter 130 mm
            x-travel 2.500 mm
            y-travel 2.000 mm
            z-travel 1.500 mm
            w-travel 750
            control HEIDENHAIN iTNC 530
            bore capacity in steel (diameter. 130 mm
            B-axis rotary movement table 360 Grad
            b-axis, positioning accuracy 360.000 x 0,001 °
            Machining unit -
            fixed spindle nosing, length 370 mm
            fixed spindle nosing, diameter 280 mm
            Tool holder (short taper accordi. ISO 50
            drive power S1 (100%) 37/51 kW
            max. torque at the spindle 2.415 Nm
            Drive power S1 (100%) / S2 (30mi. 5- 3.000 min-1
            1st gear stage 5 - 782 min-1
            2nd gear stage 783 - 3.000 min-1
            Nc rotary table -
            Description :
            Scope of retrofit and supply
            • CNC drilling and milling machine with spindle Ø 130mm in horizontal
            execution
            • tool magazine with 40 places and automatic tool changer – fully overhauled
            • 3 pcs. chip conveyor
            • Ball screws and bearings in X, Y, Z and W axis - NEW
            • Guide rails and roller shoes in X, Y, Z and W axis – NEW
            • Spindle and quill bearings - NEW
            • Tool clamping unit – fully overhauled by the manufacturer
            • Measuring systems cleaned, checked and partially replaced by new components
            • Machine completely checked mechanically and electrically
            • Largely new cables
            • Energy guiding chains - NEW
            • Telescopic covers – fully refurbished
            • Bellows in the vertical axis - NEW
            • New machine coating in two-layer structure with oil-resistant and
            abrasion-resistant two-component paints
            • Swamp pump


            Additional scope of delivery possible in EU upon request
            • Delivery free to your factory
            • Geometrical set-up, installation and commissioning
            • Laser measurement with compensation of the measuring systems
            • New working chamber enclosure, individually manufactured
            • New coolant system with filter unit for internal and external cooling 20/8
            bar

          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine UNION TC 110


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1612 · Table Type Boring and Milling Machine

          UNION - TC 110 - - 2002 - 2022 - HEIDENHAIN iTNC 530

          Technical details
          spindle diameter 110 mm︱x-travel 2.000 mm︱y-travel 1.600 mm︱z-travel 1.500 mm︱w-travel 550 ︱Control HEIDENHAIN iTNC 530 ︱B-axis rotary movement table 360 Grad︱b-axis, positioning accuracy 360.000 x 0,001 °︱Machining unit - ︱fixed spindle nosing, length 300 mm︱fixed spindle nosing, diameter 260 mm︱lowest position above table surface 0 mm︱Tool holder (short taper according to DIN 69871) SK 50 ︱drive power S1 (100%) 22/27 kW︱max. torque at the spindle 2.012 Nm︱Drive power S1 (100%) / S2 (30min) 5- 3.000 min-1︱Nc rotary table - ︱surface area 1.600 x 1.250 mm︱center hole in table 100 mm H6 ︱max. load (max.150mm except table m.) 6.000 kg︱
          Scope of retrofit • Ball screws in X, Y, Z and W axis, incl. new bearings - NEW • Linear guides and roller shoes in X, Y, Z and W axis - NEW • Tool changer and magazine overhauled • Bearings for spindle and quill - NEW • CNC control HEIDENHAIN iTNC 530 -NEW from our stock- • Tool clamping unit make OTT overhauled by manufacturer • Measuring systems cleaned, checked and partially replaced by new components • Machine completely checked mechanically and electrically • Largely new cables, especially in the energy chains • Energy chains - NEW • Telescopic covers overhauled • Bellows in the vertical axis – NEW • Machine painting with oil-resistant and abrasion-resistant two-component paint - NEW • 2 pcs. lubrication units - NEW • 2 pcs. High pressure units make HAWE – NEW • Oil-cooling device make HYDAC for main-gearbox - NEW • All mechanical and electrical components have been checked and renewed if necessary Options for extra charge • Machine enclosure, custom made – NEW - • Coolant system for internal & external cooling 20 / 8 bar -NEW- • Delivery, installation with start-up
            spindle diameter 110 mm
            x-travel 2.000 mm
            y-travel 1.600 mm
            z-travel 1.500 mm
            w-travel 550
            Control HEIDENHAIN iTNC 530
            B-axis rotary movement table 360 Grad
            b-axis, positioning accuracy 360.000 x 0,001 °
            Machining unit -
            fixed spindle nosing, length 300 mm
            fixed spindle nosing, diameter 260 mm
            Tool holder (short taper accordi. SK 50
            drive power S1 (100%) 22/27 kW
            max. torque at the spindle 2.012 Nm
            Drive power S1 (100%) / S2 (30mi. 5- 3.000 min-1
            Nc rotary table -
            surface area 1.600 x 1.250 mm
            center hole in table 100 mm H6
            max. load (max.150mm except tabl. 6.000 kg
            Description :
            Scope of retrofit
            • Ball screws in X, Y, Z and W axis, incl. new bearings - NEW
            • Linear guides and roller shoes in X, Y, Z and W axis - NEW
            • Tool changer and magazine overhauled
            • Bearings for spindle and quill - NEW
            • CNC control HEIDENHAIN iTNC 530 -NEW from our stock-
            • Tool clamping unit make OTT overhauled by manufacturer
            • Measuring systems cleaned, checked and partially replaced by new components
            • Machine completely checked mechanically and electrically
            • Largely new cables, especially in the energy chains
            • Energy chains - NEW
            • Telescopic covers overhauled
            • Bellows in the vertical axis – NEW
            • Machine painting with oil-resistant and abrasion-resistant two-component
            paint - NEW
            • 2 pcs. lubrication units - NEW
            • 2 pcs. High pressure units make HAWE – NEW
            • Oil-cooling device make HYDAC for main-gearbox - NEW
            • All mechanical and electrical components have been checked and renewed if
            necessary

            Options for extra charge
            • Machine enclosure, custom made – NEW -
            • Coolant system for internal & external cooling 20 / 8 bar -NEW-
            • Delivery, installation with start-up


          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine Castel GREEN 1T4


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-16220 · Table Type Boring and Milling Machine

          Castel - GREEN 1T4 - - 1997 - HEIDENHAIN TNC 430

          Technical details
          spindle diameter 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱
          Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
            spindle diameter 110 mm
            x-travel 2.100 mm
            y-travel 1.500 mm
            z-travel 1.000 mm
            w-travel 500
            control HEIDENHAIN TNC 430
            Working Spindle -
            boring quill diameter 110 mm
            spindle taper DIN 69871 ISO 50
            spindle power 22 kW
            transmission ratio 2
            turning speed range 2.000 U/min
            clamping table -
            max. workpiece weight 4.000 kg
            surface area 1.100 x 1.300 mm
            feed range X-, Y-, Z- axis 0 – 10.000 mm/min
            feed range W-axis 0 - 10.000 mm/min
            rapid motion - x-axis 10.000 mm/min
            Description :
            Equipment.
            • CNC-control HEIDENHAIN 430
            • support bearing
            • manual milling head
            • coolant tank with pump


          Datasheet
          Request / Contact

          Bed Type Milling Machine - Horizontal

          used  Bed Type Milling Machine - Horizontal SORALUCE TA 35


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1634 · Bed Type Milling Machine - Horizontal

          SORALUCE - TA 35 - - 2012 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 3.500 mm︱y-travel 1.250 mm︱z-travel 1.200 mm︱Control HEIDENHAIN iTNC 530 ︱clamping table - ︱surface area 3.700 x 1.000 mm︱max. workpiece weight 2.500 kg/m²︱Width of t-slots 7x 4 mm H12 ︱Distance between t-slots 140 mm︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 10.000 mm/min︱rapid in X/Y/Z 25.000 mm/min︱max. feed force 10.000 kN︱Universal Milling Head - ︱Swiveling area front/back level 2,5/2,5 ° 144/144 Pos ︱capacity at 100% load 32 kW︱Speed range, stepless 15 - 4.000 min-1︱Tool bore SK 50 – DIN 69871-AD ︱automatic tool changer ATC - ︱Tool places 20 Plätze︱
          Ausstattung / Zubehör • Universal-Fräskopf, Positionierung über Hirth-Verzahnung, Diagonal- und Vertikalebene 2,5° *Kopf wurde in 2022 vom Hersteller überholt* • Spindeldrehzahl max. 3.000 min-1 • Achsantriebe über Präzisions-Kugelgewindetriebe und digitale Servomotoren • CNC-Steuerung HEIDENHAIN iTNC 530 • Elektronisches Handrad HEIDENHAIN HR 410 • Schwenkbares Bedienpult zur Maschinenbedienung vor oder hinter der Maschine • Automatischer Werkzeugwechsler mit 20 Magazinplätzen • Kühlmitteltank mit 500l Fassungsvermögen, Papierbandfilteranlage und zwei Kühlmittelkreisläufen • 50 l/min bei 5bar für externe Kühlung • 20 l/min bei 15 bar für die Innenkühlung • Späneförderer im Arbeitsraum, Auswurf rechts, Höhe ca. 1.000mm • Präzisions-Kugelumlaufspindeln in allen Achsen • Teleskopische Stahlabdeckung der X-Achse • Vertikale Führung unten mit Stahlvorhang abgedeckt • Arbeitsraumverkleidung an den Seiten geschlossen. • Die manuellen Schiebetüren an der Vorderseite der Maschine können über die gesamte Länge des Spanntisches geöffnet werden. • Hydrauliksystem • Ölkühler • Beleuchtung des Arbeitsbereichs • Lackierung RAL 7035 lichtgrau / RAL 5011 stahlblau
            x-travel 3.500 mm
            y-travel 1.250 mm
            z-travel 1.200 mm
            Control HEIDENHAIN iTNC 530
            clamping table -
            surface area 3.700 x 1.000 mm
            max. workpiece weight 2.500 kg/m²
            Width of t-slots 7x 4 mm H12
            Distance between t-slots 140 mm
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 10.000 mm/min
            rapid in X/Y/Z 25.000 mm/min
            max. feed force 10.000 kN
            Universal Milling Head -
            Swiveling area front/back level 2,5/2,5 ° 144/144 Pos
            capacity at 100% load 32 kW
            Speed range, stepless 15 - 4.000 min-1
            Tool bore SK 50 – DIN 69871-AD
            automatic tool changer ATC -
            Tool places 20 Plätze
            Description :
            Ausstattung / Zubehör
            • Universal-Fräskopf, Positionierung über Hirth-Verzahnung, Diagonal- und
            Vertikalebene 2,5°
            *Kopf wurde in 2022 vom Hersteller überholt*
            • Spindeldrehzahl max. 3.000 min-1
            • Achsantriebe über Präzisions-Kugelgewindetriebe und digitale Servomotoren
            • CNC-Steuerung HEIDENHAIN iTNC 530
            • Elektronisches Handrad HEIDENHAIN HR 410
            • Schwenkbares Bedienpult zur Maschinenbedienung vor oder hinter der Maschine
            • Automatischer Werkzeugwechsler mit 20 Magazinplätzen
            • Kühlmitteltank mit 500l Fassungsvermögen, Papierbandfilteranlage und zwei
            Kühlmittelkreisläufen
            • 50 l/min bei 5bar für externe Kühlung
            • 20 l/min bei 15 bar für die Innenkühlung
            • Späneförderer im Arbeitsraum, Auswurf rechts, Höhe ca. 1.000mm
            • Präzisions-Kugelumlaufspindeln in allen Achsen
            • Teleskopische Stahlabdeckung der X-Achse
            • Vertikale Führung unten mit Stahlvorhang abgedeckt
            • Arbeitsraumverkleidung an den Seiten geschlossen.
            • Die manuellen Schiebetüren an der Vorderseite der Maschine können über die
            gesamte Länge des Spanntisches geöffnet werden.
            • Hydrauliksystem
            • Ölkühler
            • Beleuchtung des Arbeitsbereichs
            • Lackierung RAL 7035 lichtgrau / RAL 5011 stahlblau

          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Horizontal SORALUCE TA 35


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1635 · Bed Type Milling Machine - Horizontal

          SORALUCE - TA 35 - - 2007 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 3.500 mm︱y-travel 1.250 mm︱z-travel 1.000 mm︱Control HEIDENHAIN iTNC 530 ︱clamping table - ︱surface area 3.700 x 850 mm︱max. workpiece weight 2.500 kg/m²︱Width of t-slots 24 mm H12 ︱Distance between t-slots 140 mm︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 10.000 mm/min︱rapid in X/Y/Z 25.000 mm/min︱max. feed force 10.000 kN︱Universal Milling Head - ︱Swiveling area front/back level 2,5/2,5 ° 144/144 Pos ︱capacity at 100% load 32 kW︱Speed range, stepless 15 - 4.000 min-1︱Tool bore SK 50 nach ISO 7388/1 ︱automatic tool changer ATC - ︱Tool places 20 Plätze︱
          Equipment & Accessories • Universal milling head, positioning via Hirth coupling, diagonal level 2.5°, vertical level 2.5° • Spindle speed max. 3.000 min-1 • Axis drives by means of precision ball screws and digital servo motors • CNC control HEIDENHAIN iTNC 530 • Electronic handwheel HEIDENHAIN HR 410 • Swiveling operating panel for machine operation in front or back of the machine • Automatic tool changer with 20 magazine positions • Coolant tank with 150l capacity, 50 l/min at 3bar for external cooling • Chip conveyor in the working area, ejection right, height ca. 1.000mm • Precision ball screws in all axes • Telescopic steel cover of the X-axis, refurbished • Vertical guide covered at the bottom with steel curtain, NEW • Working area enclosure closed on the sides. • The manual sliding doors at the front of the machine can be opened along the entire length of the clamping table. • hydraulic system • work area lighting • Painting RAL 7035 light grey / RAL 5011 steel blue
            x-travel 3.500 mm
            y-travel 1.250 mm
            z-travel 1.000 mm
            Control HEIDENHAIN iTNC 530
            clamping table -
            surface area 3.700 x 850 mm
            max. workpiece weight 2.500 kg/m²
            Width of t-slots 24 mm H12
            Distance between t-slots 140 mm
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 10.000 mm/min
            rapid in X/Y/Z 25.000 mm/min
            max. feed force 10.000 kN
            Universal Milling Head -
            Swiveling area front/back level 2,5/2,5 ° 144/144 Pos
            capacity at 100% load 32 kW
            Speed range, stepless 15 - 4.000 min-1
            Tool bore SK 50 nach ISO 7388/1
            automatic tool changer ATC -
            Tool places 20 Plätze
            Description :
            Equipment & Accessories
            • Universal milling head, positioning via Hirth coupling, diagonal level
            2.5°, vertical level 2.5°
            • Spindle speed max. 3.000 min-1
            • Axis drives by means of precision ball screws and digital servo motors
            • CNC control HEIDENHAIN iTNC 530
            • Electronic handwheel HEIDENHAIN HR 410
            • Swiveling operating panel for machine operation in front or back of the
            machine
            • Automatic tool changer with 20 magazine positions
            • Coolant tank with 150l capacity, 50 l/min at 3bar for external cooling
            • Chip conveyor in the working area, ejection right, height ca. 1.000mm
            • Precision ball screws in all axes
            • Telescopic steel cover of the X-axis, refurbished
            • Vertical guide covered at the bottom with steel curtain, NEW
            • Working area enclosure closed on the sides.
            • The manual sliding doors at the front of the machine can be opened along
            the entire length of the clamping table.
            • hydraulic system
            • work area lighting
            • Painting RAL 7035 light grey / RAL 5011 steel blue

          Datasheet
          Request / Contact

          Double Column Milling M/C - Gantry Type

          used  Double Column Milling M/C - Gantry Type TRIMILL VF3016


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1620 · Double Column Milling M/C - Gantry Type

          TRIMILL - VF3016 - - 2017 - HEIDENHAIN iTNC530 HSCI

          Technical details
          x-travel 3.000 mm︱y-travel 1.600 mm︱z-travel 1.200 mm︱control HEIDENHAIN iTNC530 HSCI ︱B-axis (swivelling head) +/- 100 °︱C-axis (milling head rotation axis) +/- 240 °︱feed and rapid traverse : ︱rapid feed Y,X,Z 40.000 m/min︱Rapid traverse B- and C-Axis 50 rpm︱Accelerations (X, Y and Z) 4 m/s²︱Machine table: : ︱Clamping surface 3.500 x 1.750 mm︱T-slots 27 x 22 mm H12 ︱T-slot - distance 125 mm︱max. workpiece load 7.000 kg/m2︱Max. distance table to spindle nose 1.356 mm︱2-Axis Fork Milling Head T21C ︱turning speed range: 10- 24.000 min-1︱Drive power (S1/S6): 42/50 KW︱Torque (S1/S6): 67/84 Nm︱
          Equipment / Accessories • 5-axis vertical portal milling machine in Gantry design. • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63 • Manually operated textile roof • Tool changer chain 50-fold, change orientation vertical • 3D probe for workpiece measurement • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process. Alarm triggering, feed rate reduction or machine stop are carried out via the control system • HEIDENHAIN HR550 handwheel (wireless) • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS) • TRIMILL Kinematics - application for rotary axes • TRIMILL Teleservice - remote support • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm • Hydraulic power unit • 1 lubrication unit for the machine • 1 lubrication unit for the milling spindle • 1 cooling unit for cooling the milling head • 1 cooling unit for cooling the axis motors • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm program hours on the machine: approx. 8.000h
            x-travel 3.000 mm
            y-travel 1.600 mm
            z-travel 1.200 mm
            control HEIDENHAIN iTNC530 HSCI
            B-axis (swivelling head) +/- 100 °
            C-axis (milling head rotation ax. +/- 240 °
            feed and rapid traverse :
            rapid feed Y,X,Z 40.000 m/min
            Rapid traverse B- and C-Axis 50 rpm
            Accelerations (X, Y and Z) 4 m/s²
            Machine table: :
            Clamping surface 3.500 x 1.750 mm
            T-slots 27 x 22 mm H12
            T-slot - distance 125 mm
            max. workpiece load 7.000 kg/m2
            Max. distance table to spindle n. 1.356 mm
            turning speed range: 10- 24.000 min-1
            Drive power (S1/S6): 42/50 KW
            Torque (S1/S6): 67/84 Nm
            Description :
            Equipment / Accessories
            • 5-axis vertical portal milling machine in Gantry design.
            • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63
            • Manually operated textile roof
            • Tool changer chain 50-fold, change orientation vertical
            • 3D probe for workpiece measurement
            • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process.
            Alarm triggering, feed rate reduction or machine stop are carried out via the control system
            • HEIDENHAIN HR550 handwheel (wireless)
            • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used
            • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS)
            • TRIMILL Kinematics - application for rotary axes
            • TRIMILL Teleservice - remote support
            • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm
            • Hydraulic power unit
            • 1 lubrication unit for the machine
            • 1 lubrication unit for the milling spindle
            • 1 cooling unit for cooling the milling head
            • 1 cooling unit for cooling the axis motors
            • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h
            • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm

            program hours on the machine: approx. 8.000h

          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal HERMLE C40 U


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-16360 · milling machining centers - universal

          HERMLE - C40 U - - 2003 - HEIDENHAIN iTNC530

          Technical details
          x-travel 850 mm︱y-travel 700 mm︱z-travel 500 mm︱Control HEIDENHAIN iTNC530 ︱Rotation range C-axis 360 °︱Swivel range A-axis 135 (-110/+25) °︱NC-Swivel Rotary Table : ︱diameter 800 mm︱max. table load 1.400 kg︱Circle of interference Ø 1.000 mm︱Number of T-slots (star-shaped) 8 St 14 H7︱Table feed with motor cooling : ︱milling spindle : ︱max. power ED 40 % 23 kW︱max. torque 79 Nm︱max. speed 18.000 min-1︱tool taper Capto C5 ︱spindle diameter in front bearing Ø 70 mm︱feed, rapid traverse: : ︱Acceleration in X-Y-Z axis 10 m/s²︱
          Equipment & Accessories • Former demonstration and training workshop machine, best condition • main spindle 18.000 1/min • Control Heidenhain iTNC 530 • Linear axes dynamic version • 38 tool places • Internal coolant supply 40 bar • Strainer basket filter for IKZ system • Inner and outer MQL • Scraper belt conveyor • Chip flushing pistol • Blow-off device • Sealing air for scales • Electronic handwheel • Electrical heat compensation • Oil mist extraction unit • Aggregate for spindle cooling • Coolant system with tank capacity 1.000 l and high pressure pump 40bar for internal coolant supply • Workpiece touch probe system with Renishaw probe, Capto C5 holder • Chip catcher • Manual cabin door • Manual cabin roof • Rotoclear incl. laminated glass • Various toolholders Capto C5 • Machine on: 12,200 h, spindle on 1,300 h
            x-travel 850 mm
            y-travel 700 mm
            z-travel 500 mm
            Control HEIDENHAIN iTNC530
            Rotation range C-axis 360 °
            Swivel range A-axis 135 (-110/+25) °
            NC-Swivel Rotary Table :
            diameter 800 mm
            max. table load 1.400 kg
            Circle of interference Ø 1.000 mm
            Number of T-slots (star-shaped) 8 St 14 H7
            Table feed with motor cooling :
            milling spindle :
            max. power ED 40 % 23 kW
            max. torque 79 Nm
            max. speed 18.000 min-1
            tool taper Capto C5
            spindle diameter in front bearin. Ø 70 mm
            feed, rapid traverse: :
            Acceleration in X-Y-Z axis 10 m/s²
            Description :
            Equipment & Accessories
            • Former demonstration and training workshop machine, best condition
            • main spindle 18.000 1/min
            • Control Heidenhain iTNC 530
            • Linear axes dynamic version
            • 38 tool places
            • Internal coolant supply 40 bar
            • Strainer basket filter for IKZ system
            • Inner and outer MQL
            • Scraper belt conveyor
            • Chip flushing pistol
            • Blow-off device
            • Sealing air for scales
            • Electronic handwheel
            • Electrical heat compensation
            • Oil mist extraction unit
            • Aggregate for spindle cooling
            • Coolant system with tank capacity 1.000 l and high pressure pump 40bar for internal coolant supply
            • Workpiece touch probe system with Renishaw probe, Capto C5 holder
            • Chip catcher
            • Manual cabin door
            • Manual cabin roof
            • Rotoclear incl. laminated glass
            • Various toolholders Capto C5
            • Machine on: 12,200 h, spindle on 1,300 h

          Datasheet
          Request / Contact
          used  milling machining centers - universal DECKEL MAHO DMU 125P hi-dyn


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1638 · milling machining centers - universal

          DECKEL MAHO - DMU 125P hi-dyn - - 2000 - HEIDENHAIN TNC 426/430M

          Technical details
          x-travel 1250 mm︱y-travel 880 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 426/430M ︱Rotation range C-axis (rotary table) 360 °︱Swivel range A-axis 75 (+45/-30) °︱Positioning B-axis (milling head) Horizontal/vertikal °︱NC-Swivel Rotary Table - ︱diameter 1.000 mm︱max. table load 1.500 kg︱Circle of interference Ø 1.100 mm︱Max. Workpiece height 500 mm︱Number of T-slots (parallel) 9 St. 18H7︱center hole 50H6 mm︱milling spindle - ︱Integrated motor spindle - ︱max. power ED 40 % 28 kW︱max. speed 12.000 min-1︱tool taper SK 40 ︱feed, rapid traverse: -
          Equipment and accessories • Former test and pre-series machine, very good condition • main spindle 12.000 1/min • Control Heidenhain TNC 430M • Large operating doors for optimum accessibility • Large cubic work area open on three sides • Crane loading from top to above the table center • NC swivel rotary table • Horizontal-vertical milling head • Chain magazine with 120 tool places, SK40 • Internal coolant supply 40 bar • Chip conveyor • Electronic handwheel • Spindle cooling unit • Interlit compact belt filter system, type SUK 200-900 with 900l tank volume and two coolant circuits for external and internal coolant supply • 3D touch probe system make M&H • Rotoclear rotating vision panel • Machine ON: approx. 40.900 h, Spindle ON approx. 10.600 h
            x-travel 1250 mm
            y-travel 880 mm
            z-travel 800 mm
            Control HEIDENHAIN TNC 426/430M
            Rotation range C-axis (rotary ta. 360 °
            Swivel range A-axis 75 (+45/-30) °
            Positioning B-axis (milling head. Horizontal/vertikal °
            NC-Swivel Rotary Table -
            diameter 1.000 mm
            max. table load 1.500 kg
            Circle of interference Ø 1.100 mm
            Max. Workpiece height 500 mm
            Number of T-slots (parallel) 9 St. 18H7
            center hole 50H6 mm
            milling spindle -
            Integrated motor spindle -
            max. power ED 40 % 28 kW
            max. speed 12.000 min-1
            tool taper SK 40
            feed, rapid traverse: -
            Description :
            Equipment and accessories
            • Former test and pre-series machine, very good condition
            • main spindle 12.000 1/min
            • Control Heidenhain TNC 430M
            • Large operating doors for optimum accessibility
            • Large cubic work area open on three sides
            • Crane loading from top to above the table center
            • NC swivel rotary table
            • Horizontal-vertical milling head
            • Chain magazine with 120 tool places, SK40
            • Internal coolant supply 40 bar
            • Chip conveyor
            • Electronic handwheel
            • Spindle cooling unit
            • Interlit compact belt filter system, type SUK 200-900 with 900l tank
            volume and two coolant circuits for external and internal coolant supply
            • 3D touch probe system make M&H
            • Rotoclear rotating vision panel
            • Machine ON: approx. 40.900 h, Spindle ON approx. 10.600 h


          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine PARPAS SHARK One


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1592 · Travelling column milling machine

          PARPAS - SHARK One - - 2016 - HEIDENHAIN iTNC 530 HSCI

          Technical details
          x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC -
          Guides, drive and measuring systems • All axis drives with digital drives manufacturer HEIDENHAIN • Direct measuring systems for X,Y, and Z axis manufacturer HEIDENHAIN • X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics • Precision ball screw with preloaded nuts in X-, Y- and Z-axis Coolant Equipment with Chip conveyor • Coolant outlet, switchable from coolant to air, at the front of the milling head via manually swivelling nozzles • Internal coolant supply, switchable from coolant to air, through the spindle centre. • Tank volume approx. 1.000 l • Normal coolant supply 25l/min 5 bar • High pressure pump for internal cooling 20 l/min 50 bar • Coolant tank incl. Cartridge filter and paper-belt filter system • Hinged belt chip conveyor, discharge height approx. 750 mm Equipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in all axes • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.
            x-travel 3500 mm
            y-travel 1083 mm
            z-travel 1074 mm
            control HEIDENHAIN iTNC 530 HSCI
            clamping table -
            surface area 4.000 x 1.000 mm
            Thread bore with fitting -
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 30.000 mm/min
            rapid travel x/y/z 30 m/min
            Max. feed force of axis 10.000 N
            2-axis Milling Head -
            2-axis milling head TUB-E92 with. -
            Torque-Motors for 5-axis-simulta. -
            capacity at 100% load 29 kW
            Speed stepless 2- 30.000
            max. torque 92 Nm
            Max. torque 60 min-1
            tool taper HSK 62A-DIN 69893
            automatic tool changer ATC -
            Description :
            Guides, drive and measuring systems
            • All axis drives with digital drives manufacturer HEIDENHAIN
            • Direct measuring systems for X,Y, and Z axis manufacturer HEIDENHAIN
            • X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
            • Precision ball screw with preloaded nuts in X-, Y- and Z-axis

            Coolant Equipment with Chip conveyor
            • Coolant outlet, switchable from coolant to air, at the front of the milling head via manually swivelling nozzles
            • Internal coolant supply, switchable from coolant to air, through the spindle centre.
            • Tank volume approx. 1.000 l
            • Normal coolant supply 25l/min 5 bar
            • High pressure pump for internal cooling 20 l/min 50 bar
            • Coolant tank incl. Cartridge filter and paper-belt filter system
            • Hinged belt chip conveyor, discharge height approx. 750 mm

            Equipment
            • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension
            • Milling slider as welded steel construction
            • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors
            • Oil cooling unit for cooling the milling head
            • CNC thermal compensation
            • Spindle drive 29 kW
            • Spindle speed max. 18.000 min-1
            • Axle drives by means of precision ball screws and digital servo motors
            • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles
            • Milling head Measurement “Kinematics Opt”
            • Laser tool presetter BLUM - NT version mounted on machine table
            • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
            • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
            • swivelling control panel for machine operation in front of the machine
            • Automatic tool changer with 30 magazine places, change position vertical
            • Coolant system with external shower rim and IKZ through the spindle
            • 1 chip conveyor in the working area, ejection right
            • Pretensioned linear guides in all axes
            • Precision ball screws in all axes
            • Hydraulic weight compensation in the vertical axis
            • Bellows cover of the X-axis
            • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed
            • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table.
            Safety fencing for the back machine area with two secured access doors.








          Datasheet
          Request / Contact
          used  Travelling column milling machine SORALUCE FP 8000


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1632 · Travelling column milling machine

          SORALUCE - FP 8000 - - 2010 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 8.000 mm︱y-travel 1.500 mm︱z-travel 2.600 mm︱Control HEIDENHAIN iTNC 530 ︱NC –Rotary sliding table, Fabr. FIBRO - ︱surface area 3.000 x 2.500 mm︱V-Axis (translational movement) 2.000 mm︱max. workpiece weight 40.000 kg︱clamping table - mm︱surface area 4.5ßß x 2.000 mm︱max. workpiece load 10.000 kg/m2︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 20.000 mm/min︱rapid in X/Y/Z 35 m/min︱Orthogonal Milling head H41 - ︱Swiveling area front/rear section 1°/1° -360 x 1°/ +/- 135° ︱capacity at 100% load 32 kW︱Speed range, stepless 40 - 4.000 min-1︱max. torque 900 Nm︱tool taper SK 50 – DIN 69871-AD
          Equipment and Accessories • Machine bed, column and vertical saddle as cast iron construction, heat-treated for stress-relieve • Milling slide as cast iron construction, heat-treated for stress-relieve • Universal milling head, positioning via Hirth toothing, front plane 1°, rear plane 1° - changeable automatically *Milling head was overhauled by the manufacturer* • Facing head D'Andrea UT 5 - changeable automatically • spindle extension L = 950 mm - changeable automatically • oil cooling unit for cooling of milling spindle motor and milling head • spindle drive 32 kW • spindle speed max. 4.000 min-1 • Axis drives by means of precision ball screw spindles and digital servo motors • 3-D measuring touch probe system with radio transmission • CNC control HEIDENHAIN iTNC 530 incl. digital drive technology • Portable electric handwheel HEIDENHAIN HR 410 • Travelling operator platform • Automatic tool changer with 40 magazine positions, change position horizontal/vertical • Coolant system with external shower ring and IKZ through the spindle, magnetic separator and paper belt filter • 1 pc. chip conveyor lengthwise in the working area, 1 pc. cross conveyor on the right side • Precision linear guides in all axes • Precision ball screws in all axes • Direct measuring system in all axes • Hydraulic counterbalance in the vertical axis • Telescopic steel cover of the X-axis • Milling slides closed at the top and bottom of the vertical axis with rolling belts • FIBRO rotary transfer table, clamping surface 3.000 x 2.500 mm, • max. 40.000 kg workpiece weight. • 1 pc. panel field 4.500 x 2.000 x 300 mm • 1 pc. pick-up station for automatic milling head change. Milling head, spindle extension and D'Andrea facing head are automatically changed in and out via CNC program • Air conditioning for electrical cabinet • hydraulic system • workspace lighting • Painting RAL 7035 grey white/RAL 5011 steel blue • Operating hours: Machine ON approx. 31,000 h, program run approx. 12,000 h
            x-travel 8.000 mm
            y-travel 1.500 mm
            z-travel 2.600 mm
            Control HEIDENHAIN iTNC 530
            NC –Rotary sliding table, Fabr. -
            surface area 3.000 x 2.500 mm
            V-Axis (translational movement) 2.000 mm
            max. workpiece weight 40.000 kg
            clamping table - mm
            surface area 4.5ßß x 2.000 mm
            max. workpiece load 10.000 kg/m2
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 20.000 mm/min
            rapid in X/Y/Z 35 m/min
            Orthogonal Milling head H41 -
            Swiveling area front/rear sectio. 1°/1° -360 x 1°/ +/- 135°
            capacity at 100% load 32 kW
            Speed range, stepless 40 - 4.000 min-1
            max. torque 900 Nm
            tool taper SK 50 – DIN 69871-AD
            Description :
            Equipment and Accessories
            • Machine bed, column and vertical saddle as cast iron construction,
            heat-treated for stress-relieve
            • Milling slide as cast iron construction, heat-treated for stress-relieve
            • Universal milling head, positioning via Hirth toothing, front plane 1°,
            rear plane 1° - changeable automatically
            *Milling head was overhauled by the manufacturer*
            • Facing head D'Andrea UT 5 - changeable automatically
            • spindle extension L = 950 mm - changeable automatically
            • oil cooling unit for cooling of milling spindle motor and milling head
            • spindle drive 32 kW
            • spindle speed max. 4.000 min-1
            • Axis drives by means of precision ball screw spindles and digital servo
            motors
            • 3-D measuring touch probe system with radio transmission
            • CNC control HEIDENHAIN iTNC 530 incl. digital drive technology
            • Portable electric handwheel HEIDENHAIN HR 410
            • Travelling operator platform
            • Automatic tool changer with 40 magazine positions, change position
            horizontal/vertical
            • Coolant system with external shower ring and IKZ through the spindle,
            magnetic separator and paper belt filter
            • 1 pc. chip conveyor lengthwise in the working area, 1 pc. cross conveyor
            on the right side
            • Precision linear guides in all axes
            • Precision ball screws in all axes
            • Direct measuring system in all axes
            • Hydraulic counterbalance in the vertical axis
            • Telescopic steel cover of the X-axis
            • Milling slides closed at the top and bottom of the vertical axis with
            rolling belts
            • FIBRO rotary transfer table, clamping surface 3.000 x 2.500 mm,
            • max. 40.000 kg workpiece weight.
            • 1 pc. panel field 4.500 x 2.000 x 300 mm
            • 1 pc. pick-up station for automatic milling head change.
            Milling head, spindle extension and D'Andrea facing head are automatically
            changed in and out via CNC program
            • Air conditioning for electrical cabinet
            • hydraulic system
            • workspace lighting
            • Painting RAL 7035 grey white/RAL 5011 steel blue
            • Operating hours: Machine ON approx. 31,000 h, program run approx. 12,000 h

          Datasheet
          Request / Contact
          used  Travelling column milling machine ANAYAK HVM-8000-PC


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1633 · Travelling column milling machine

          ANAYAK - HVM-8000-PC - - 2007 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 7.300 mm︱y-travel 1.500 mm︱z-travel 2.000 mm︱Control HEIDENHAIN iTNC 530 ︱clamping table - ︱surface area 8.000 x 1.200 mm︱max. workpiece weight 15.000 kg/m²︱T-slot number x size 9 x 22 mm Abstand 130 mm ︱feeds - ︱X-, Y- and Z-axis, stepless 2 - 10.000 mm/min︱Orthogonal indexable milling head - ︱Swiveling area front/back level 1°/1° 360 x 1° +/- 135 ° ︱Power at S1/S6 ED 28/38 kW︱Speed range, stepless 40 - 4.000 min-1︱max. torque 2.240 Nm︱tool taper SK 50 – DIN 69871-B ︱ZF - Gearbox 2 Getriebestufen ︱automatic tool changer ATC - ︱Tool places 40 Plätze ︱diameter of tools max. 125/250 mm︱
          Equipment and Accessories • Machine bed, column and vertical saddle as cast iron construction, heat-treated for stress-relieve • Milling slide as cast iron construction, heat-treated for stress-relieve • Universal milling head, positioning via Hirth toothing, front plane 1°, rear plane 1° - changeable automatically • oil cooling unit for cooling of ZF main gearbox • spindle drive 28/38 kW • spindle speed max. 4.000 min-1 • Axis drives by means of gear rack or precision ball screw spindles and digital servo motors • 3-D measuring touch probe system • CNC control HEIDENHAIN iTNC 530 incl. digital drive technology • Portable electric handwheel HEIDENHAIN HR 410 • Travelling operator platform with second CNC control HEIDENHAIN iTNC 530 • Autom. tool changer with 40 magazine positions, change position horizontal/vertical • Coolant system with external shower ring and IKZ through the spindle • 1 chip conveyor lengthwise in the working area • Precision linear guides in all axes • Precision ball screws in all axes • Direct measuring system in all axes • Hydraulic counterbalance in the vertical axis • Telescopic steel covers of the X-axis • Milling unit closed with link aprons at the top and bottom of the vertical axis • Air conditioning for electrical cabinet • hydraulic system • Working area lighting • Approx. operating hours: Machine ON approx. 50,000 h, program run approx. 28,000 h
            x-travel 7.300 mm
            y-travel 1.500 mm
            z-travel 2.000 mm
            Control HEIDENHAIN iTNC 530
            clamping table -
            surface area 8.000 x 1.200 mm
            max. workpiece weight 15.000 kg/m²
            T-slot number x size 9 x 22 mm Abstand 130 mm
            feeds -
            X-, Y- and Z-axis, stepless 2 - 10.000 mm/min
            Orthogonal indexable milling hea. -
            Swiveling area front/back level 1°/1° 360 x 1° +/- 135 °
            Power at S1/S6 ED 28/38 kW
            Speed range, stepless 40 - 4.000 min-1
            max. torque 2.240 Nm
            tool taper SK 50 – DIN 69871-B
            ZF - Gearbox 2 Getriebestufen
            automatic tool changer ATC -
            Tool places 40 Plätze
            diameter of tools max. 125/250 mm
            Description :
            Equipment and Accessories
            • Machine bed, column and vertical saddle as cast iron construction,
            heat-treated for stress-relieve
            • Milling slide as cast iron construction, heat-treated for stress-relieve
            • Universal milling head, positioning via Hirth toothing, front plane 1°,
            rear plane 1° - changeable automatically
            • oil cooling unit for cooling of ZF main gearbox
            • spindle drive 28/38 kW
            • spindle speed max. 4.000 min-1
            • Axis drives by means of gear rack or precision ball screw spindles and
            digital servo motors
            • 3-D measuring touch probe system
            • CNC control HEIDENHAIN iTNC 530 incl. digital drive technology
            • Portable electric handwheel HEIDENHAIN HR 410
            • Travelling operator platform with second CNC control HEIDENHAIN iTNC 530
            • Autom. tool changer with 40 magazine positions, change position
            horizontal/vertical
            • Coolant system with external shower ring and IKZ through the spindle
            • 1 chip conveyor lengthwise in the working area
            • Precision linear guides in all axes
            • Precision ball screws in all axes
            • Direct measuring system in all axes
            • Hydraulic counterbalance in the vertical axis
            • Telescopic steel covers of the X-axis
            • Milling unit closed with link aprons at the top and bottom of the vertical
            axis
            • Air conditioning for electrical cabinet
            • hydraulic system
            • Working area lighting
            • Approx. operating hours: Machine ON approx. 50,000 h, program run approx.
            28,000 h

          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine LORENZ LS 82


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1554 · Gear Shaping Machine

          LORENZ - LS 82 - - 1999 - SIEMENS 840 C

          Technical details
          max. wheel diameter 80 mm︱gear width 44 mm︱max. module 5 ︱min. module ︱Control SIEMENS 840 C ︱adjustment axis angle shaping sp. - wp table -0,5 - +0,5 °︱stroke range 250-1.500 DH/min︱centre distance table/shaping spindle -15 bis +170 mm︱max. stroke length 55 mm︱max. helix angle 45 ︱max. tool diameter 180 mm︱feeds: ︱feed rotation axis of workpiece (100 mm wp diam.) mm/min︱feed rotation axis of work piece (100 mm wp. diam. 10-15.700 mm/min︱feed center axis of machine column 1 - 3.750 mm/min︱ 23 kw︱voltage 400 V︱operating frequency 50 Hz︱control voltage 24 V DC︱total power requirement kW︱
          equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil mist exhaust system · tailstock · shaping spindle and lift of shaping head equipped with hydrostatic bearing
            max. wheel diameter 80 mm
            gear width 44 mm
            max. module 5
            Control SIEMENS 840 C
            adjustment axis angle shaping sp. -0,5 - +0,5 °
            stroke range 250-1.500 DH/min
            centre distance table/shaping sp. -15 bis +170 mm
            max. stroke length 55 mm
            max. helix angle 45
            max. tool diameter 180 mm
            feed rotation axis of work piece. 10-15.700 mm/min
            feed center axis of machine colu. 1 - 3.750 mm/min
            23 kw
            voltage 400 V
            operating frequency 50 Hz
            control voltage 24 V DC
            Description :
            equipment
            · stroke positioning adjustment controlled by CNC · stroke length adjustment
            mechanical-manually · machine is fixed to the ground with specific damping
            shoes (part of the delivery scope) · oil mist exhaust system · tailstock ·
            shaping spindle and lift of shaping head equipped with hydrostatic bearing
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used  Cylindrical Grinding Machine - Universal KELLENBERGER 600U - 125


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1623 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 600U - 125 - - 1980/2018 -

          Technical details
          grinding diameter 250 mm︱grinding length 600 mm︱centre height 125 mm︱table: - ︱travel 900 mm︱Travel per handwheel rotation coarse/fine 20 / 2,5 mm︱Hydraulic speed stepless 0,02 - 6 mm/min︱Min. reversing distance 2,5 mm︱Holding time during reversing 0 - 5 sec︱swivelling range 11 Grad︱cross slide _ ︱Max. Travel max. 285 mm︱Travel per handwheel rotation coarse/fine 4 / 0,5 mm︱Rapid flow and -return hydraulically 40 mm︱Hydraulic feed 0 - 0,95 mm/Ø︱Micro stop of the feed 0,001 mm︱Infeed grinding: - ︱Infeed speed coarse/fine: 0,25 - 25 µ/sec︱Longitudinal grinding: Infeed amounts per table 0 - 0,95 ︱reversal left, right or both sides coarse/fine 1 - 30 µ︱
          Equipment & Accessories Scope of geometric retrofit in 2018: • Slideways of X- and Z-axis regrinded, intertable and top table regrinded • Centre height of headstock and tailstock readjusted • Machine checked from the bottom up and rebuilt • Drives for workpiece spindle and grinding wheel renewed with YASKAWA frequency converter • Wearing parts replaced • New machine painting in two-layer-structure with oil-resistant and abrasion paints, Color RAL 7035 lightgrey and RAL 7016 anthracite
            grinding diameter 250 mm
            grinding length 600 mm
            centre height 125 mm
            table: -
            travel 900 mm
            Travel per handwheel rotation co. 20 / 2,5 mm
            Hydraulic speed stepless 0,02 - 6 mm/min
            Min. reversing distance 2,5 mm
            Holding time during reversing 0 - 5 sec
            swivelling range 11 Grad
            cross slide _
            Max. Travel max. 285 mm
            Travel per handwheel rotation co. 4 / 0,5 mm
            Rapid flow and -return hydraulic. 40 mm
            Hydraulic feed 0 - 0,95 mm/Ø
            Micro stop of the feed 0,001 mm
            Infeed grinding: -
            Infeed speed coarse/fine: 0,25 - 25 µ/sec
            Longitudinal grinding: Infeed am. 0 - 0,95
            reversal left, right or both sid. 1 - 30 µ
            Description :
            Equipment & Accessories
            Scope of geometric retrofit in 2018:
            • Slideways of X- and Z-axis regrinded, intertable and top table regrinded
            • Centre height of headstock and tailstock readjusted
            • Machine checked from the bottom up and rebuilt
            • Drives for workpiece spindle and grinding wheel renewed with YASKAWA
            frequency converter
            • Wearing parts replaced
            • New machine painting in two-layer-structure with oil-resistant and
            abrasion paints, Color RAL 7035 lightgrey and RAL 7016 anthracite


          Datasheet
          Request / Contact

          Optical Profile Grinding Machine

          used  Optical Profile Grinding Machine ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-15990 · Optical Profile Grinding Machine

          ABA - Powerline - - 2001-2022 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation


          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used  Surface Grinding Machine - Horizontal ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1599 · Surface Grinding Machine - Horizontal

          ABA - Powerline - - 2001-2022 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱Control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            Control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation


          Datasheet
          Request / Contact

          Friction Welding Machine

          used  Friction Welding Machine KUKA RS 12


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1567 · Friction Welding Machine

          KUKA - RS 12 - - 2010 - SIEMENS S7 -CPU 317-PN/DP

          Technical details
          current capacity 250 kVA︱workpiece dia. - mm︱cross cut max. - mm²︱Control SIEMENS S7 -CPU 317-PN/DP ︱Max. friction force 81 kN bei 100 bar︱Min. friction force 5,7 kN bei 7 bar︱Max. upsetting force 120 kN bei 148 bar︱Max. spindle speed 2.500 min-1︱Max. slide stroke 400 mm︱Spindle drive power 147 kW︱Electrical supply data - ︱Nominal voltage 400/50 V/Hz︱Total connected load 250 kVA︱Medium power requirement 50 kW︱Medium power 250 A︱Fuse 630 A slow︱Cable cross section 240 mm²︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Equipment, accessories - KUKA friction welding machine RS 12 - short version - Machine control with electrical cabinet - Control unit Panel PC 677B with step chain diagnosis - Parameter monitoring device PCD 314 - remote diagnosis - Camless slide control - Clamping tools rotary - fixed - safety device - Automatically operated control door - Heating for the hydraulic system - fluid grease lubrication - Scanner integrated in RS 12 - Special drive 147 kW - CE declaration of conformity The cooling of the main motor as well as the switch cabinet was carried out by decentralized service water cooling and must be ensured by a new cold water chiller if necessary.
            current capacity 250 kVA
            workpiece dia. - mm
            cross cut max. - mm²
            Control SIEMENS S7 -CPU 317-PN/DP
            Max. friction force 81 kN bei 100 bar
            Min. friction force 5,7 kN bei 7 bar
            Max. upsetting force 120 kN bei 148 bar
            Max. spindle speed 2.500 min-1
            Max. slide stroke 400 mm
            Spindle drive power 147 kW
            Electrical supply data -
            Nominal voltage 400/50 V/Hz
            Total connected load 250 kVA
            Medium power requirement 50 kW
            Medium power 250 A
            Fuse 630 A slow
            Cable cross section 240 mm²
            Description :
            Equipment, accessories
            - KUKA friction welding machine RS 12 - short version
            - Machine control with electrical cabinet
            - Control unit Panel PC 677B with step chain diagnosis
            - Parameter monitoring device PCD 314
            - remote diagnosis
            - Camless slide control
            - Clamping tools rotary - fixed
            - safety device
            - Automatically operated control door
            - Heating for the hydraulic system
            - fluid grease lubrication
            - Scanner integrated in RS 12
            - Special drive 147 kW
            - CE declaration of conformity

            The cooling of the main motor as well as the switch cabinet was carried out by
            decentralized service water cooling and must be ensured by a new cold water
            chiller if necessary.

          Datasheet
          Request / Contact

          Built-In Rotary Table

          used  Built-In Rotary Table FIBRO FIBROPLAN


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1215 · Built-In Rotary Table

          FIBRO - FIBROPLAN - - -

          Technical details
          table diameter 800 mm︱table load 6 t︱table height mm︱weight of the machine ca. 950 kg︱
          NC rotary table make FIBRO type FIBROPLAN Ø 800 mm rotary table with increased geometric accuracy with 8 star-shaped T-slots 18H8 according to DIN650 with centering hole Ø40H6 mounting height 250mm total ratio 1:600 direct measuring system ROD880C/36000 weight approx. 950 kg
            table diameter 800 mm
            table load 6 t
            weight of the machine ca. 950 kg
            Description :
            NC rotary table make FIBRO
            type FIBROPLAN Ø 800 mm
            rotary table with increased geometric accuracy
            with 8 star-shaped T-slots 18H8 according to DIN650
            with centering hole Ø40H6
            mounting height 250mm
            total ratio 1:600
            direct measuring system ROD880C/36000
            weight approx. 950 kg

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Fleckenstein Werkzeugmaschinen GmbH   63831 - Wiesen Sommerweg 15 Deutschland
          Fleckenstein Werkzeugmaschinen GmbH

          Sommerweg 15



          Contact Trader


            Fleckenstein Werkzeugmaschinen GmbH
           Sommerweg 15
            63831 - Wiesen
            Deutschland
            +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
            fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
            Contact person:

            Wir sind ein international tätiges Handelsunternehmen für gebrauchte Werkzeugmaschinen und Produktionsanlagen und bereits seit 30 Jahren am Markt etabliert. In unseren Lagern finden Sie ausschließlich hochwertige Maschinen und Produktionsanlagen namenhafter Hersteller. Durch den Ankauf und der Lagerung auf ca. 2.400 m2 kann ein Großteil der Anlagen unter Strom besichtigt werden.
          Nutzen Sie unseren erweiterten Service, Demontage, Montage und Inbetriebnahme bis hin zur produktionsfertigen Übergabe.




          Machine category


          Bearbeitungszentrum - Universal · Bettfräsmaschine - Horizontal · Bohr- und Fräsmaschine · Drehmaschine - zyklengesteuert · Einbaurundtisch · Fahrständerfräsmaschine · Flachschleifmaschine - Horizontal · Karusselldrehmaschine - Einständer · Portalfräsmaschine verfahrbar · Profilschleifmaschine · Reibschweißmaschine · Rundschleifmaschine - Universal · Tischbohrwerk · Zahnradstossmaschine ·