Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          GWM GmbH Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe Graziola DANIA 180


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3272 · Center Lathe

          Graziola - DANIA 180 - - 1975 -

          Technical details
          turning diameter over bed - mm︱turning diameter over slide rest 268 mm︱centre distance 1000 mm︱center height over bed 210 mm︱Swing in gap 580 mm︱bed width 320 mm︱spindle bore 57 mm︱spindle turning speed range (24) 38 - 2000 U/min︱feeds - longitudinal 0,020 - 0,44 mm/U︱feeds cross 0,010 - 0,22 mm/U︱tailstock quill diameter 68 mm︱tailstock quill stroke 200 mm︱tailstock quill taper MT 5 ︱main drive 7,5 kW︱Dimensions (LxWxH) 3,3 x 1,5 x 1,7 m︱weight of the machine ca. 2,3 t︱
          * 2-axes D.R.O. make Heidenhain * Multifix toolholder * 3-jaw-chuck Forkardt F250
            turning diameter over bed - mm
            turning diameter over slide rest 268 mm
            centre distance 1000 mm
            center height over bed 210 mm
            Swing in gap 580 mm
            bed width 320 mm
            spindle bore 57 mm
            spindle turning speed range (24) 38 - 2000 U/min
            feeds - longitudinal 0,020 - 0,44 mm/U
            feeds cross 0,010 - 0,22 mm/U
            tailstock quill diameter 68 mm
            tailstock quill stroke 200 mm
            tailstock quill taper MT 5
            main drive 7,5 kW
            Dimensions (LxWxH) 3,3 x 1,5 x 1,7 m
            weight of the machine ca. 2,3 t
            Description :
            * 2-axes D.R.O. make Heidenhain
            * Multifix toolholder
            * 3-jaw-chuck Forkardt F250

          Datasheet
          Request / Contact
          used  Center Lathe REIDEN R200-2


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3247 · Center Lathe

          REIDEN - R200-2 - - 1967 -

          Technical details
          turning diameter over bed 425 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱turning speeds 45-2240 U/min︱centre height 200 mm︱spindle passage 40 mm︱total power requirement 10 kW︱weight of the machine ca. 3,5 t︱
          2 cabinets of accessories chuck, faceplate, rolling grains-multifix holder copying device
            turning diameter over bed 425 mm
            turning diameter over slide rest 240 mm
            turning length 1500 mm
            turning speeds 45-2240 U/min
            centre height 200 mm
            spindle passage 40 mm
            total power requirement 10 kW
            weight of the machine ca. 3,5 t
            Description :
            2 cabinets of accessories
            chuck, faceplate, rolling grains-multifix holder
            copying device
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used  CNC Lathe - Inclined Bed Type GILDEMEISTER CTX 400


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3256 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - CTX 400 - - 1997 - Heidenhain CNC

          Technical details
          turning diameter 570 mm︱turning length 635 mm︱control Heidenhain CNC ︱turning diameter over bed slide 420 mm︱spindle turning speed - stepless 25-5000 U/min︱number of driven tools 6 mm︱Drive 5 kW︱weight 4,3 T︱power capacity 21 kW︱spindle passage 79 mm︱dimensions of the machine ca. 3,2 x 1,7 x 1,7 m︱
          CNC HEIDENHAIN Pilot 4232 C-axis with 6 driven toolings 20 FIXED VDI 30 TOOLING 1 CHUCK + 1 COLLET CHUCK CHIP CONVEYOR ONLY 15000 RUNING HOURS keine Kühlschmiermittelanlage , kein Späneförderer
            turning diameter 570 mm
            turning length 635 mm
            control Heidenhain CNC
            turning diameter over bed slide 420 mm
            spindle turning speed - stepless 25-5000 U/min
            number of driven tools 6 mm
            Drive 5 kW
            weight 4,3 T
            power capacity 21 kW
            spindle passage 79 mm
            dimensions of the machine ca. 3,2 x 1,7 x 1,7 m
            Description :
            CNC HEIDENHAIN Pilot 4232
            C-axis with 6 driven toolings
            20 FIXED VDI 30 TOOLING
            1 CHUCK + 1 COLLET CHUCK
            CHIP CONVEYOR
            ONLY 15000 RUNING HOURS
            keine Kühlschmiermittelanlage , kein Späneförderer
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center WFL  5-ACHSEN M 50


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-1976 · CNC Turning- and Milling Center

          WFL 5-ACHSEN - M 50 - - 1993 - SINUMERIK 880T

          Technical details
          turning diameter 540 mm︱turning length 1600 mm︱control SINUMERIK 880T ︱power capacity 37 kW︱turning speeds 4000 U/min︱tool taper SK 40 DIN 69871 - A40 ︱greates pass round over bed 540 mm︱chuck diameter 250 mm︱swing diameter over slide rest 450 mm︱tool magazin: 24-fach
          Turning-, Drilling and Milling Unit: Tool System SK 40 C- axis clamping chuck SMW KNCS 250 swarf conveyor 12-fold turret 3D Interpolation electronical hand wheel Machine is for complete working.
            turning diameter 540 mm
            turning length 1600 mm
            control SINUMERIK 880T
            power capacity 37 kW
            turning speeds 4000 U/min
            tool taper SK 40 DIN 69871 - A40
            greates pass round over bed 540 mm
            chuck diameter 250 mm
            swing diameter over slide rest 450 mm
            tool magazin: 24-fach
            Description :
            Turning-, Drilling and Milling Unit: Tool System SK 40
            C- axis
            clamping chuck SMW KNCS 250
            swarf conveyor
            12-fold turret
            3D Interpolation
            electronical hand wheel

            Machine is for complete working.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled VDF BOEHRINGER DUS 560 / 1000


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3239 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 560 / 1000 - - 1992 - Sinumerik 805 D

          Technical details
          turning diameter max. 570 mm︱turning length 1000 mm︱control Sinumerik 805 D ︱turning diameter over bed mm︱turning diameter over slide rest mm︱turning length mm︱greates pass round over bed 570 mm︱swing diameter over face slide 365 mm︱external threat diameter 345 mm︱ ︱material dimensions max. strip 3 - 2.500 min/-1︱no. of turning speeds 2 ︱travel z3 15 / 21 kW︱Helical angle 2.000 Nm︱spindle diameter in front bearing 100 mm︱spindle bore ( 62 ) mm︱spindle head DIN 55027 No. 8︱chucking diameter 250 mm︱feeds selfworking ︱radial face slide travel 345 mm︱
          https://youtu.be/ADoeZ92L6v4
            turning diameter max. 570 mm
            turning length 1000 mm
            control Sinumerik 805 D
            greates pass round over bed 570 mm
            swing diameter over face slide 365 mm
            external threat diameter 345 mm
            material dimensions max. strip 3 - 2.500 min/-1
            no. of turning speeds 2
            travel z3 15 / 21 kW
            Helical angle 2.000 Nm
            spindle diameter in front bearin. 100 mm
            spindle bore ( 62 ) mm
            spindle head DIN 55027 No. 8
            chucking diameter 250 mm
            radial face slide travel 345 mm
            Description :
            https://youtu.be/ADoeZ92L6v4
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal HELLER MCP300


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2921 · Machining Center - Horizontal

          HELLER - MCP300 - - 1998 - Uni Pro 90

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 1100 mm︱control Uni Pro 90 ︱round table 360,000 x 0,001 °︱size of pallet 2x 500 x 630 mm︱workpiece weight 800 kg︱spindle turning speed - stepless 4500 U/min︱spindle drive 52 kW︱tool taper SK 50 ︱feed X/Y/Z-axis 1 - 60.000 mm/min︱rapid traverse X/Y/Z 60 m/min︱rapid traverse rotary table 20 U/min︱toolpiece magazine: chain magazine 52 Stück︱tool diameter 72 mm︱tool diameter with 2 vacant positions 150 mm︱tool length - max. 400 mm︱total power requirement 56,00 kW︱weight of the machine ca. 12,00 t︱dimensions of the machine ca. 6,5 x 4,50 x 3,8 m︱
          Horizontal machining center with Uni Pro 90 control; Coolant unit KNOLL; chip conveyor, coolant through the spindle 50bar;
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 1100 mm
            control Uni Pro 90
            round table 360,000 x 0,001 °
            size of pallet 2x 500 x 630 mm
            workpiece weight 800 kg
            spindle turning speed - stepless 4500 U/min
            spindle drive 52 kW
            tool taper SK 50
            feed X/Y/Z-axis 1 - 60.000 mm/min
            rapid traverse X/Y/Z 60 m/min
            rapid traverse rotary table 20 U/min
            toolpiece magazine: chain magazi. 52 Stück
            tool diameter 72 mm
            tool diameter with 2 vacant posi. 150 mm
            tool length - max. 400 mm
            total power requirement 56,00 kW
            weight of the machine ca. 12,00 t
            dimensions of the machine ca. 6,5 x 4,50 x 3,8 m
            Description :
            Horizontal machining center with Uni Pro 90 control;
            Coolant unit KNOLL; chip conveyor, coolant through the spindle 50bar;

          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HELLER MCS - H 450


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2922 · Machining Center - Horizontal

          HELLER - MCS - H 450 - - 1998 - UNI Pro 90

          Technical details
          x-travel 1600 mm︱y-travel 1000 mm︱z-travel 1250 mm︱control UNI Pro 90 ︱round table 360x0,001 °︱size of pallet 1000 x 1000 mm︱workpiece weight 2500 kg︱spindle turning speed - stepless 45 - 6000 U/min︱spindle drive 52 kW︱tool taper SK 50 ︱feed X/Y/Z-axis 1 - 60.000 mm/min︱rapid traverse X/Y/Z 60 m/min︱rapid traverse rotary table 20 U/min︱tooling places 125 ︱total power requirement 52 kW︱weight of the machine ca. 12 t︱
          Horizontal machining center with Uni Pro 90 control; Coolant unit KNOLL; chip conveyor, coolant through the spindle 50bar; .
            x-travel 1600 mm
            y-travel 1000 mm
            z-travel 1250 mm
            control UNI Pro 90
            round table 360x0,001 °
            size of pallet 1000 x 1000 mm
            workpiece weight 2500 kg
            spindle turning speed - stepless 45 - 6000 U/min
            spindle drive 52 kW
            tool taper SK 50
            feed X/Y/Z-axis 1 - 60.000 mm/min
            rapid traverse X/Y/Z 60 m/min
            rapid traverse rotary table 20 U/min
            tooling places 125
            total power requirement 52 kW
            weight of the machine ca. 12 t
            Description :
            Horizontal machining center with Uni Pro 90 control;
            Coolant unit KNOLL; chip conveyor, coolant through the spindle 50bar;
            .
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical Brother TC 321


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3193 · Machining Center - Vertical

          Brother - TC 321 - - 1995 - Brother CNC control

          Technical details
          x-travel 700 mm︱y-travel 300 mm︱z-travel 250 mm︱control Brother CNC control ︱material dimensions max. strip 5-6000 min/-1︱tool taper BT 30 ISA ︱work table: ︱table surface area 600 x 300 mm︱ 10 pos.︱feeds: ︱rapid traverse xy-25 ,z 20 m/min︱total power requirement kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2540 x 1900 x 2020 m︱
          CNCdrill & tapping center Brother TC 229
            x-travel 700 mm
            y-travel 300 mm
            z-travel 250 mm
            control Brother CNC control
            material dimensions max. strip 5-6000 min/-1
            tool taper BT 30 ISA
            table surface area 600 x 300 mm
            10 pos.
            rapid traverse xy-25 ,z 20 m/min
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 2540 x 1900 x 2020 m
            Description :
            CNCdrill & tapping center Brother TC 229






          Datasheet
          Request / Contact
          used  Machining Center - Vertical KIWA Palettenmaster 4


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2586 · Machining Center - Vertical

          KIWA - Palettenmaster 4 - - 1987 - FANUC Serie 11M

          Technical details
          x-travel 650 mm︱y-travel 390 mm︱z-travel 500 mm︱table-size 760 x 400 (2x) mm︱table load capacity - central/maximum 500 kp︱spindle turning speed range max.10.000 U/min︱spindle taper ISO 40 ︱tool change unit 32 ︱feeds x/y/z -stepless 150 - 4000 mm/min︱rapid traverse X- and Y-axis 18 m/min︱rapid traverse Z-axis 12 m/min︱control FANUC Serie 11M ︱voltage 380 V / 50 Hz︱spindle drive 5,5 kW︱total power requirement 17 kVA︱weight of the machine ca. 7,5 t︱
          with pallett changer tool tapers with several spare parts
            x-travel 650 mm
            y-travel 390 mm
            z-travel 500 mm
            table-size 760 x 400 (2x) mm
            table load capacity - central/ma. 500 kp
            spindle turning speed range max.10.000 U/min
            spindle taper ISO 40
            tool change unit 32
            feeds x/y/z -stepless 150 - 4000 mm/min
            rapid traverse X- and Y-axis 18 m/min
            rapid traverse Z-axis 12 m/min
            control FANUC Serie 11M
            voltage 380 V / 50 Hz
            spindle drive 5,5 kW
            total power requirement 17 kVA
            weight of the machine ca. 7,5 t
            Description :
            with pallett changer
            tool tapers with several spare parts

          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal CORREA A 10


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3199 · Bed Type Milling Machine - Universal

          CORREA - A 10 - - 1984 - Heidenhain

          Technical details
          x-travel 1300 mm︱y-travel 630 mm︱z-travel 630 mm︱Control Heidenhain ︱table surface area 1700x630 mm︱Table load 3000 kg︱turning speeds 80-3150 U/min︱spindle taper ISO 50 ︱total power requirement 12 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 2,8 x 2,6 x 2,2 m︱
            x-travel 1300 mm
            y-travel 630 mm
            z-travel 630 mm
            Control Heidenhain
            table surface area 1700x630 mm
            Table load 3000 kg
            turning speeds 80-3150 U/min
            spindle taper ISO 50
            total power requirement 12 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 2,8 x 2,6 x 2,2 m
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine WMW-HECKERT FW 400 VI


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2787 · Universal Milling Machine

          WMW-HECKERT - FW 400 VI - - 1980 -

          Technical details
          x-travel 1120 mm︱y-travel 355 mm︱z-travel 400 mm︱table surface area 400 x 1600 mm︱table load 1500 kp︱spindle taper ISO 50 0︱distance work spindle /surface of the table 600 mm︱feed - longitudinal/cross 16 - 800 mm/min︱feeds vertical 5 - 250 mm/min︱rapid motion -longitudinal/cross/vertical 3150 / 1000 mm/min︱turning speed range 28 - 1400 U/min︱voltage 380 V / 50 Hz︱total power requirement 14,5 kW︱power capacity 11 kW︱weight of the machine ca. 4,1 t︱dimensions of the machine ca. 3,5 x 3,5 x 2,2 m︱
          spindle and holder for horinzontal milling device universal milling head
            x-travel 1120 mm
            y-travel 355 mm
            z-travel 400 mm
            table surface area 400 x 1600 mm
            table load 1500 kp
            spindle taper ISO 50 0
            distance work spindle /surface o. 600 mm
            feed - longitudinal/cross 16 - 800 mm/min
            feeds vertical 5 - 250 mm/min
            rapid motion -longitudinal/cross. 3150 / 1000 mm/min
            turning speed range 28 - 1400 U/min
            voltage 380 V / 50 Hz
            total power requirement 14,5 kW
            power capacity 11 kW
            weight of the machine ca. 4,1 t
            dimensions of the machine ca. 3,5 x 3,5 x 2,2 m
            Description :
            spindle and holder for horinzontal milling device
            universal milling head
          Datasheet
          Request / Contact
          used  Universal Milling Machine Malick & Walkows 1000 x 300


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3146 · Universal Milling Machine

          Malick & Walkows - 1000 x 300 - - 1970 -

          Technical details
          table-size 1000 x 300 mm︱tool taper SK 40 ︱spindle speed: 60-1180 U/min︱x-travel 1200 mm︱y-travel 500 mm︱z-travel 500 ︱total power requirement 4 kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,7 x 1,9 x 1,7 m︱
          - including vertical milling head - incl. vice - including accessories as shown in the pictures
            table-size 1000 x 300 mm
            tool taper SK 40
            spindle speed: 60-1180 U/min
            x-travel 1200 mm
            y-travel 500 mm
            z-travel 500
            total power requirement 4 kW
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,7 x 1,9 x 1,7 m
            Description :
            - including vertical milling head
            - incl. vice
            - including accessories as shown in the pictures
          Datasheet
          Request / Contact

          Gear Hobbing and Shaping Mach. -combined

          used  Gear Hobbing and Shaping Mach. -combined LIEBHERR LCC 150


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3059 · Gear Hobbing and Shaping Mach. -combined

          LIEBHERR - LCC 150 - - 2001 - Siemens 840 C

          Technical details
          Control Siemens 840 C ︱max. module 3 ︱max. workpiece diameter 150 mm︱smallest to mill number of teeth 4 ︱ambient temperature +12°C...+40°C ︱Relative humidity max 90% bei 20°C, max 50% ︱Resolution accuracy 0,1° ︱Milling head swivel spindle +/-45° ︱Toolpiece table load 17 kN︱details shaping unit ︱biggest width of teeth at 23 mm︱max helix angle 45° ︱axisangleadjustment shaping spindle-workpiecetable -0,5°...3.000 DH/min ︱feed rotation axe tool 10...9.420 mm/min ︱feed radial axis machine stand 330-18500 ︱max. behind shaping angle 12° ︱milling head Motorfräskopf ︱hob turning speeds 150...1500 U/min︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          Twin-gear-wheels can be manufactured in one operation on the machine.
            Control Siemens 840 C
            max. module 3
            max. workpiece diameter 150 mm
            smallest to mill number of teeth 4
            ambient temperature +12°C...+40°C
            Relative humidity max 90% bei 20°C, max 50%
            Resolution accuracy 0,1°
            Milling head swivel spindle +/-45°
            Toolpiece table load 17 kN
            biggest width of teeth at 23 mm
            max helix angle 45°
            axisangleadjustment shaping spin. -0,5°...3.000 DH/min
            feed rotation axe tool 10...9.420 mm/min
            feed radial axis machine stand 330-18500
            max. behind shaping angle 12°
            milling head Motorfräskopf
            hob turning speeds 150...1500 U/min
            weight of the machine ca. 15 t
            Description :
            Twin-gear-wheels can be manufactured in one operation on the machine.
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used  Gear Hobbing Machine - Horizontal LIEBHERR LC 1002


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2932 · Gear Hobbing Machine - Horizontal

          LIEBHERR - LC 1002 - - 1993 - Liebherr CNC

          Technical details
          max. wheel diameter 1.000 mm︱gear width 800 mm︱max. module 18 ︱min. module 4 ︱control Liebherr CNC ︱min. number of teeth 6 ︱max. helix angle +/- 50 °︱max. workpiece weight 5.000 kg︱axial adjustment 1100 mm︱table diameter 710 mm︱table bore diameter 180 mm︱max. milling cutter diameter 240 mm︱cutter length max. 300 mm︱shifting 200 mm︱milling tool taper ISO 50 ︱feeds axial 0,1 - 20 mm/WU︱tangential feed 0,01 - 5 mm/WU︱radial feed 0,1 - 4 mm/WU︱rapid traverse ( X / Y / Z ) 2 / 3 / 1 m/min︱total power requirement 59 kVA︱
          Accessories: milling arbors Diameter 32/40/50 chip tranport https://youtu.be/59MKNPzCs-E
            max. wheel diameter 1.000 mm
            gear width 800 mm
            max. module 18
            min. module 4
            control Liebherr CNC
            min. number of teeth 6
            max. helix angle +/- 50 °
            max. workpiece weight 5.000 kg
            axial adjustment 1100 mm
            table diameter 710 mm
            table bore diameter 180 mm
            max. milling cutter diameter 240 mm
            cutter length max. 300 mm
            shifting 200 mm
            milling tool taper ISO 50
            feeds axial 0,1 - 20 mm/WU
            tangential feed 0,01 - 5 mm/WU
            radial feed 0,1 - 4 mm/WU
            rapid traverse ( X / Y / Z ) 2 / 3 / 1 m/min
            total power requirement 59 kVA
            Description :
            Accessories:
            milling arbors Diameter 32/40/50
            chip tranport
            https://youtu.be/59MKNPzCs-E


          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal LIEBHERR LC 1002


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2876 · Gear Hobbing Machine - Horizontal

          LIEBHERR - LC 1002 - - 1989 - Liebherr CNC

          Technical details
          max. wheel diameter 1.000 mm︱gear width 800 mm︱max. module 18 ︱min. module 4 ︱control Liebherr CNC ︱min. number of teeth 6 ︱max. helix angle +/- 50 °︱max. workpiece weight 5.000 kg︱axial adjustment 800 mm︱table diameter 710 mm︱table bore diameter 180 mm︱max. milling cutter diameter 240 mm︱cutter length max. 300 mm︱shifting 200 mm︱milling tool taper ISO 50 ︱feeds axial 0,1 - 20 mm/WU︱tangential feed 0,01 - 5 mm/WU︱radial feed 0,1 - 4 mm/WU︱rapid traverse ( X / Y / Z ) 2 / 3 / 1 m/min︱total power requirement 59 kVA︱
          Switch-on hours: 68.000 h Accessories: tool cabinets miller milling arbors Diameter 32/40/50 device chip tranport https://youtu.be/59MKNPzCs-E
            max. wheel diameter 1.000 mm
            gear width 800 mm
            max. module 18
            min. module 4
            control Liebherr CNC
            min. number of teeth 6
            max. helix angle +/- 50 °
            max. workpiece weight 5.000 kg
            axial adjustment 800 mm
            table diameter 710 mm
            table bore diameter 180 mm
            max. milling cutter diameter 240 mm
            cutter length max. 300 mm
            shifting 200 mm
            milling tool taper ISO 50
            feeds axial 0,1 - 20 mm/WU
            tangential feed 0,01 - 5 mm/WU
            radial feed 0,1 - 4 mm/WU
            rapid traverse ( X / Y / Z ) 2 / 3 / 1 m/min
            total power requirement 59 kVA
            Description :
            Switch-on hours: 68.000 h
            Accessories:
            tool cabinets
            miller
            milling arbors Diameter 32/40/50
            device
            chip tranport
            https://youtu.be/59MKNPzCs-E

          Datasheet
          Request / Contact

          Internal and Face Grinding Machine

          used  Internal and Face Grinding Machine VOUMARD 202


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3252 · Internal and Face Grinding Machine

          VOUMARD - 202 - - 1977 -

          Technical details
          centre height 200 mm︱internal diameter 1-100 mm︱grinding depth 120 mm︱table adjustment: 250 mm︱total power requirement 10 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2x1,7x2 m︱
          Accessories: manual swivable face grinding device and dressing device HF-grindig spindle drive Voumard with converter, spindle speed hydraulic swivable dressing device for the grinding spindle magnetic chuck coolant device control cabinet 6 pieces of grinding spindles 60 grinding stone tapers Serial-No. 200482
            centre height 200 mm
            internal diameter 1-100 mm
            grinding depth 120 mm
            table adjustment: 250 mm
            total power requirement 10 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2x1,7x2 m
            Description :
            Accessories:
            manual swivable face grinding device and dressing device
            HF-grindig spindle drive Voumard with converter, spindle speed
            hydraulic swivable dressing device for the grinding spindle
            magnetic chuck
            coolant device
            control cabinet
            6 pieces of grinding spindles
            60 grinding stone tapers
            Serial-No. 200482
          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used  Surface Grinding Machine - Horizontal MININI 500


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2988 · Surface Grinding Machine - Horizontal

          MININI - 500 - - 1986 -

          Technical details
          grinding length 900 mm︱grinding width 400 mm︱workpiece height 550 mm︱total power requirement kW︱weight of the machine ca. 3,4 t︱dimensions 3,87x1,75x2 m︱
          - with autom. vertical adjustment - Accessories: magnetic plate 700 x 300 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment Digital read out Serial Number: 780
            grinding length 900 mm
            grinding width 400 mm
            workpiece height 550 mm
            weight of the machine ca. 3,4 t
            dimensions 3,87x1,75x2 m
            Description :
            - with autom. vertical adjustment -

            Accessories:
            magnetic plate 700 x 300 mm,
            grinding wheel with flange,
            wheel trueing attachment, wet grinding
            attachment
            Digital read out
            Serial Number: 780
          Datasheet
          Request / Contact

          Band Saw - Automatic

          used  Band Saw - Automatic KASTO HBA 420


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2996 · Band Saw - Automatic

          KASTO - HBA 420 - - 1993 -

          Technical details
          cutting diameter 420 mm︱saw band length 6300 mm︱cutting speed 20-130 m/min︱cutting width at rectangle material 420x420 mm︱cutting pressure einstellbar ︱chip conveyor ︱weight of the machine ca. 3 t︱feeds slides 7mm Rollenbahn ︱Control ︱total power requirement 8 kW︱
            cutting diameter 420 mm
            saw band length 6300 mm
            cutting speed 20-130 m/min
            cutting width at rectangle mater. 420x420 mm
            cutting pressure einstellbar
            weight of the machine ca. 3 t
            feeds slides 7mm Rollenbahn
            total power requirement 8 kW
          Datasheet
          Request / Contact
          used  Band Saw - Automatic FORTE BA 251


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3189 · Band Saw - Automatic

          FORTE - BA 251 - - 1986 -

          Technical details
          250 mm︱ 250 mm︱ mm︱cutting lenght 400-800 DOPP mm︱cutting angle 90 °︱ 4 - 600 mm︱cutting speed 20-140 m/min︱dimensions of saw-band 3660 x 25 x 0,9 mm︱weight of the machine ca. 720 kg︱Dimensions (L,W) 1780 x 2225 mm︱
          Plus Ersatzbänder
            250 mm
            250 mm
            cutting lenght 400-800 DOPP mm
            cutting angle 90 °
            4 - 600 mm
            cutting speed 20-140 m/min
            dimensions of saw-band 3660 x 25 x 0,9 mm
            weight of the machine ca. 720 kg
            Dimensions (L,W) 1780 x 2225 mm
            Description :
            Plus Ersatzbänder
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic Schroeder 2540 x 4


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3244 · Plate Shear - Hydraulic

          Schroeder - 2540 x 4 - - 1980 -

          Technical details
          sheet width 2500 mm︱plate thickness 4 mm︱distance between columns 2550 mm︱cutting angle 1,5 °︱oil volume 120 l︱machine weight ab. 4300 kg︱dimensions 3400x2100x1500 mm︱
            sheet width 2500 mm
            plate thickness 4 mm
            distance between columns 2550 mm
            cutting angle 1,5 °
            oil volume 120 l
            machine weight ab. 4300 kg
            dimensions 3400x2100x1500 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profilo del commerciante: GWM GmbH
          Macchine Utensili

          Contatta Trader



            GWM GmbH
          Macchine Utensili

           Gewerbestr. 2
            79639 - Grenzach-Wyhlen
            Germania
            (0049) 7624 9082 0 "> (0049) 7624 9082 0
            07624 9082-206
            info@gromag.ch
            www.gromag.ch

          Profilo di Trader

          Come trovarci


          gromag ag
          Hauptstrasse 9
          CH-8598 Bottighofen

          Tel: + 41 (0) 31 755 75 75
          Fax: + 41 (0) 31 755 78 96
          E-mail: info@gromag.ch

           

           




          GWM GmbH Werkzeugmaschinen  79639 - Grenzach-Wyhlen Gewerbestr. 2 Deutschland
          GWM GmbH Werkzeugmaschinen

          Gewerbestr. 2



          Contact Trader


            GWM GmbH Werkzeugmaschinen
           Gewerbestr. 2
            79639 - Grenzach-Wyhlen
            Deutschland
            (0049) 7624 9082 0
            07624 9082-206
            info@gromag.ch
            www.gromag.ch
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Absaugung · Abwälzfräs- und Stoßmaschine -kombiniert · Aufspanntisch · Bandsäge - Automatisch · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bügelsäge · Bügelsägeautomat · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Flachschleifmaschine - Horizontal · Flachschleifmaschine - Vertikal · Fräsmaschine - Universal · Futter · Graviermaschine · Handspindelpresse · Hobel-, Fräs- und Schleifmaschine · Honmaschine - handbetätigt · Härtepresse · Härteprüfer · Innen- und Planschleifmaschine · Keilwellenschleifmaschine · Koordinatenbohrmaschine · Koordinatenschleifmaschine · Krananlage · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · LuZ · Mehrspindelbohrmaschine - mech. vertikal · Nachdrehbank · Nuten-Stossmaschine · Nutenziehmaschine · Profilstahlschere - Kombiniert · Richtpresse - Doppelständer · Rundschleifmaschine - Universal · Rundtischflächenschleifmaschine - Horiz. · Senkerodiermaschine · Spritzgiessmaschine bis 1000 KN · Stangenautomat - Mehrspindel · Stanz- und Nibbelmaschine · Stanzautomat - Zweiständer · Ständerbohrmaschine · Tafelschere - hydraulisch · Vielkantdrehmaschine · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Wärmeofen · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnradentgratmaschine ·