,
Rete europea di concessionari di macchine per stoccaggio
+49 (0) 2389 5299080
Servizio di ricerca Vendi macchine usate

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:
             Vista: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2023

          HESSE+CO Maschinenfabrik GesmbH Industriezentrum NÖ-Süd - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe RICHYOUNG - FUKUNO RICHYOUNG - FUKUNO FL 1840

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2048 · Center Lathe

          RICHYOUNG - FUKUNO - RICHYOUNG - FUKUNO FL 1840 - - 1999 -

          Technical details
          gebraucht ︱ 1999 ︱ 1679 ︱ Juli 2023, Zwischenverkau ︱ Taiwan ︱ 14900 €︱ 460 mm︱ 1000 mm︱ 230 mm︱ 52 mm︱ 240 mm︱ 350 mm︱ 8 M︱ 45 - 2500 ︱ 280 mm︱ 65 mm︱ 4 MK︱ 150 mm︱ 5.5 kW︱ 2270 mm︱
          CNC control Fagor 800 TG1 G-programming and cycle programming possible (longitudinal- , cross-, cone-, thread-, infeed- and contourcycles) 3-jaw chuck Dm. 200 mm with changeable jaws 4fold steel tool post (quick change tool post on the photo is not included) coolant equipment suction REVEN centralized slideway lubrication serial interface with cable and software for programm transfer to a PC (PC not included) operating manual in German machine location: Münchendorf (Austria)
            gebraucht
            1999
            1679
            Juli 2023, Zwischenverkau
            Taiwan
            14900 €
            460 mm
            1000 mm
            230 mm
            52 mm
            240 mm
            350 mm
            8 M
            45 - 2500
            280 mm
            65 mm
            4 MK
            150 mm
            5.5 kW
            2270 mm
            Description :
            CNC control Fagor 800 TG1
            G-programming and cycle programming possible (longitudinal- , cross-, cone-, thread-, infeed- and contourcycles)
            3-jaw chuck Dm. 200 mm with changeable jaws
            4fold steel tool post (quick change tool post on the photo is not included)
            coolant equipment
            suction REVEN
            centralized slideway lubrication
            serial interface with cable and software for programm transfer to a PC (PC not included)
            operating manual in German
            machine location: Münchendorf (Austria)
          Datasheet
          Request / Contact
          used Center Lathe ZMM C 11 MCS

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-949 · Center Lathe

          ZMM - C 11 MCS - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 50600 €︱ 600 mm︱ 2000 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 8 ︱ 90 M︱ 3 ︱ 20 - 100; 80 - 400; 400 - U/Min︱ 120 ︱ 64 ︱ 0.5 - 120 mm︱ 60 - 1/4 Gänge/"︱ 0.125 - 30 ︱ 315 mm︱
          In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 47.850,- turning length1.500 mm € 48.890,- turning length3.000 mm € 55.090,- turning length4.000 mm € 60.340,- turning length5.000 mm € 74.360,-
            neu
            Bulgarien
            50600 €
            600 mm
            2000 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100; 80 - 400; 400 - U/Min
            120
            64
            0.5 - 120 mm
            60 - 1/4 Gänge/"
            0.125 - 30
            315 mm
            Description :
            In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.

            It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.

            driven by variable speed control (3 steps)
            3-axes digital readout Fagor with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 47.850,-

            turning length1.500 mm
            € 48.890,-

            turning length3.000 mm
            € 55.090,-

            turning length4.000 mm
            € 60.340,-

            turning length5.000 mm
            € 74.360,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM C 400 TS

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-943 · Center Lathe

          ZMM - C 400 TS - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 37580 €︱ 759.12 €︱ 400 mm︱ 750 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 6 ︱ 6 M︱ 4 ︱ 18-98; 48-265; 144-790; 3 U/Min︱ 80 ︱ 0.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱ 40 ︱ 0.25 - 7.5 mm︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning length 1.500 mm € 39.140,-
            neu
            Bulgarien
            37580 €
            759.12 €
            400 mm
            750 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            4
            18-98; 48-265; 144-790; 3 U/Min
            80
            0.015 - 0.6 mm/U
            0.0075 - 0.3 mm/U
            40
            0.25 - 7.5 mm
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 38.210,-

            turning length 1.500 mm
            € 39.140,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM C 10 THS

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-961 · Center Lathe

          ZMM - C 10 THS - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 70960 €︱ 1419.2 €︱ 860 mm︱ 1500 mm︱ 430 mm︱ 135 mm︱ 620 mm︱ 560 mm︱ 11 ︱ 140 M︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 150 ︱ 0.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45 ︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 73.670,- turning length3.000 mm € 84.100,- turning length4.000 mm € 89.860,- turning length5.000 mm € 101.570,- turning length6.000 mm € 114.310,-
            neu
            Bulgarien
            70960 €
            1419.2 €
            860 mm
            1500 mm
            430 mm
            135 mm
            620 mm
            560 mm
            11
            140 M
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 73.670,-

            turning length3.000 mm
            € 84.100,-

            turning length4.000 mm
            € 89.860,-

            turning length5.000 mm
            € 101.570,-

            turning length6.000 mm
            € 114.310,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM CU 630 RD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-927 · Center Lathe

          ZMM - CU 630 RD - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 55600 €︱ 1112 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11 ︱ 120 M︱ 3 ︱ 16 - 63; 63 - 250; 315 - U/Min︱ 120 ︱ 0.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 060 - 1/4 Gänge/"︱
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 52.850,- turning length1.500 mm € 53.890,- turning length3.000 mm € 60.190,- turning length4.000 mm € 65.540,- turning length5.000 mm € 79.660,-
            neu
            Bulgarien
            55600 €
            1112 €
            630 mm
            2000 mm
            315 mm
            103 mm
            430 mm
            400 mm
            11
            120 M
            3
            16 - 63; 63 - 250; 315 - U/Min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            060 - 1/4 Gänge/"
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 52.850,-

            turning length1.500 mm
            € 53.890,-

            turning length3.000 mm
            € 60.190,-

            turning length4.000 mm
            € 65.540,-

            turning length5.000 mm
            € 79.660,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM CU 1250 RD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-941 · Center Lathe

          ZMM - CU 1250 RD - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 108130 €︱ 1320 mm︱ 1500 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15 ︱ 160 M︱ 4 ︱ 3,7 - 15,6; 14,7 - 62; 58 U/Min︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 1/16 - 60 Gänge/"︱ 0.125 - 120 ︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 121.780,- turning length4.000 mm € 129.460,- turning lenght 5.000 mm € 139.900,- turning length6.000 mm € 155.300,-
            neu
            Bulgarien
            108130 €
            1320 mm
            1500 mm
            625 mm
            155 mm
            940 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            1/16 - 60 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 121.780,-

            turning length4.000 mm
            € 129.460,-

            turning lenght 5.000 mm
            € 139.900,-

            turning length6.000 mm
            € 155.300,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM C 10 TMS

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-955 · Center Lathe

          ZMM - C 10 TMS - - -

          Technical details
          neu ︱ Bulgarien ︱ 78300 €︱ 1566 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11 ︱ 140 M︱ 3 ︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 150 ︱ 0.039 - 18 mm/U︱ 0.02 - 9 mm/U︱ 0.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45 ︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 65.160,- turning length2.000 mm € 67.870,- turning length4.000 mm € 84.060,- turning length5.000 mm € 95.770,- turning length6.000 mm € 108.510,-
            neu
            Bulgarien
            78300 €
            1566 €
            760 mm
            3000 mm
            380 mm
            132 mm
            520 mm
            560 mm
            11
            140 M
            3
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.039 - 18 mm/U
            0.02 - 9 mm/U
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.500 mm
            € 65.160,-

            turning length2.000 mm
            € 67.870,-

            turning length4.000 mm
            € 84.060,-

            turning length5.000 mm
            € 95.770,-

            turning length6.000 mm
            € 108.510,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM CU 1000 RD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-935 · Center Lathe

          ZMM - CU 1000 RD - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 102070 €︱ 1090 mm︱ 1500 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15 ︱ 160 M︱ 4 ︱ 3,7 - 15,6; 14,7 - 62; 58 U/Min︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120 ︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 115.920,- turning length4.000 mm € 123.600,- turning length5.000 mm € 133.940,- turning length6.000 mm € 149.440,-
            neu
            Bulgarien
            102070 €
            1090 mm
            1500 mm
            500 mm
            155 mm
            690 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 115.920,-

            turning length4.000 mm
            € 123.600,-

            turning length5.000 mm
            € 133.940,-

            turning length6.000 mm
            € 149.440,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM CU 325 RD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-911 · Center Lathe

          ZMM - CU 325 RD - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 23160 €︱ 472.46 €︱ 400 mm︱ 750 mm︱ 165 mm︱ 32 mm︱ 190 mm︱ 200 mm︱ 5 ︱ 4,5 M︱ 2 ︱ 85-405; 470-2200 U/Min︱ 48 ︱ 0.006 - 1.77 mm/U︱ 0.003 - 0.885 mm/U︱ 0.1 - 28 mm︱ 0.1 - 1.75 ︱
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,-
            neu
            Bulgarien
            23160 €
            472.46 €
            400 mm
            750 mm
            165 mm
            32 mm
            190 mm
            200 mm
            5
            4,5 M
            2
            85-405; 470-2200 U/Min
            48
            0.006 - 1.77 mm/U
            0.003 - 0.885 mm/U
            0.1 - 28 mm
            0.1 - 1.75
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 23.480,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM CU 500 MRD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-913 · Center Lathe

          ZMM - CU 500 MRD - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 46190 €︱ 933.04 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 75 mm︱ 300 mm︱ 400 mm︱ 8 ︱ 80 M︱ 3 ︱ 25-100; 100-400; 500-2000 U/Min︱ 120 ︱ 0.04 - 12 mm/U︱ 0.02 - 6 mm/U︱ 0.5 - 120 mm︱ 0.125 - 30 ︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning length2.000 mm € 47.900,- turning length3.000 mm € 52.490,- turning length4.000 mm € 57.840,- turning length5.000 mm € 71.960,-
            neu
            Bulgarien
            46190 €
            933.04 €
            500 mm
            1500 mm
            250 mm
            75 mm
            300 mm
            400 mm
            8
            80 M
            3
            25-100; 100-400; 500-2000 U/Min
            120
            0.04 - 12 mm/U
            0.02 - 6 mm/U
            0.5 - 120 mm
            0.125 - 30
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 45.150,-

            turning length2.000 mm
            € 47.900,-

            turning length3.000 mm
            € 52.490,-

            turning length4.000 mm
            € 57.840,-

            turning length5.000 mm
            € 71.960,-
          Datasheet
          Request / Contact
          used Center Lathe ZMM CU 800 RD

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-931 · Center Lathe

          ZMM - CU 800 RD - - -

          Technical details
          neu ︱ ︱ Bulgarien ︱ 96170 €︱ 1923.4 €︱ 890 mm︱ 1500 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15 ︱ 160 M︱ 4 ︱ 3,7 - 15,6; 14,7 - 62; 58 U/Min︱ 160 ︱ 0.032 - 38.9 mm/U︱ 0.016 - 19.45 mm/U︱ 0.5 - 480 mm︱ 60 - 1/16 Gänge/"︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 99.590,- turning length3.000 mm € 110.020,- turning length4.000 mm € 117.600,- turning length5.000 mm € 128.040,- turning length6.000 mm € 143.440,-
            neu
            Bulgarien
            96170 €
            1923.4 €
            890 mm
            1500 mm
            400 mm
            155 mm
            490 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.032 - 38.9 mm/U
            0.016 - 19.45 mm/U
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 99.590,-

            turning length3.000 mm
            € 110.020,-

            turning length4.000 mm
            € 117.600,-

            turning length5.000 mm
            € 128.040,-

            turning length6.000 mm
            € 143.440,-
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used Drilling and Milling M/C ERLO TF 35

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1236 · Drilling and Milling M/C

          ERLO - TF 35 - - -

          Technical details
          neu ︱ ca. 8 Wochen ab Auftragse ︱ Spanien ︱ 45910 €︱ 927.38 €︱ 35 mm︱ MK 4 ︱ 390 mm︱ 94- 2.225 (16) 50 Hz 113 U/min︱ M35 ︱ 1660 mm︱ 1510 mm︱ 2600 mm︱ 910 kg︱ 180 mm︱ 190 - 650 mm︱ 1310 mm︱ 125 mm︱ 400 x 420 mm︱ 0,10 - 0,18 - 0,24 (3) mm/min︱
          ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            45910 €
            927.38 €
            35 mm
            MK 4
            390 mm
            94- 2.225 (16) 50 Hz 113 U/min
            M35
            1660 mm
            1510 mm
            2600 mm
            910 kg
            180 mm
            190 - 650 mm
            1310 mm
            125 mm
            400 x 420 mm
            0,10 - 0,18 - 0,24 (3) mm/min
            Description :
            ERLO (MADE IN SPAIN)

            FOR DEMANDING WORKSHOP USE

            drilling and milling machine
            automatic feed
            precision electromagnetic clutches
            geared drive
            cross table
            fixed base and displaceable headstock
            control panel
            cooling equipment with electric motor pump
            hand wheel for fine tuning
            clamping device for tools
            adjustable stop
            drill guard
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used Radial Drilling Machine TAILIFT TPR-1100

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1218 · Radial Drilling Machine

          TAILIFT - TPR-1100 - - 2021 -

          Technical details
          gebraucht ︱ 2021 ︱ 3965 ︱ prompt, Zwischenverkauf v ︱ Taiwan ︱ 15600 €︱ 1 ︱ 42 mm︱ MK 4 ︱ 280 - 1.100 mm︱ 44 - 1.500 (12) U/min︱ Stahl: M 25; Guss: M 38 ︱ 1880 mm︱ 870 mm︱ 2210 mm︱ 1800 kg︱ 470 - 1.270 mm︱ 0,05 - 0,15 (3) mm/min︱ 2.2 kW︱ 260 mm︱
          DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            gebraucht
            2021
            3965
            prompt, Zwischenverkauf v
            Taiwan
            15600 €
            1
            42 mm
            MK 4
            280 - 1.100 mm
            44 - 1.500 (12) U/min
            Stahl: M 25; Guss: M 38
            1880 mm
            870 mm
            2210 mm
            1800 kg
            470 - 1.270 mm
            0,05 - 0,15 (3) mm/min
            2.2 kW
            260 mm
            Description :
            DEMO MACHINE
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with mechanical clamping
            electric height adjustment of extension arm and mechanical clamping
            mechanical clamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT TPR-1100

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2042 · Radial Drilling Machine

          TAILIFT - TPR-1100 - - 2018 -

          Technical details
          gebraucht ︱ 2018 ︱ 3980 ︱ prompt, Zwischenverkauf v ︱ Taiwan ︱ 13700 €︱ 1 ︱ 42 mm︱ MK 4 ︱ 280 - 1.100 mm︱ 44 - 1.500 (12) U/min︱ Stahl: M 25; Guss: M 38 ︱ 1750 mm︱ 800 mm︱ 2070 mm︱ 2100 kg︱ 470 - 1.270 mm︱ 0,05 - 0,15 (3) mm/min︱ 2.2 kW︱ 260 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            gebraucht
            2018
            3980
            prompt, Zwischenverkauf v
            Taiwan
            13700 €
            1
            42 mm
            MK 4
            280 - 1.100 mm
            44 - 1.500 (12) U/min
            Stahl: M 25; Guss: M 38
            1750 mm
            800 mm
            2070 mm
            2100 kg
            470 - 1.270 mm
            0,05 - 0,15 (3) mm/min
            2.2 kW
            260 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with mechanical clamping
            electric height adjustment of extension arm and mechanical clamping
            mechanical clamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used Radial Drilling Machine Unbekannt/Unknown BOHRPOWER BPC 32/1000

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1214 · Radial Drilling Machine

          Unbekannt/Unknown - BOHRPOWER BPC 32/1000 - - 2017 -

          Technical details
          gebraucht ︱ 2017 ︱ 3900 ︱ China ︱ 8490 €︱ 6800 €︱ 1 ︱ 32 mm︱ MK 4 ︱ 300 - 1.000 mm︱ 32 - 2.500 (16) U/min︱ 1760 mm︱ 800 mm︱ 2080 mm︱ 1600 kg︱ 530 - 1.000 mm︱ 2.2 kW︱ 240 mm︱ 250 mm︱ 0,75 kW︱
          box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            gebraucht
            2017
            3900
            China
            8490 €
            6800 €
            1
            32 mm
            MK 4
            300 - 1.000 mm
            32 - 2.500 (16) U/min
            1760 mm
            800 mm
            2080 mm
            1600 kg
            530 - 1.000 mm
            2.2 kW
            240 mm
            250 mm
            0,75 kW
            Description :
            box table 600 x 455 x 455 mm
            coolant equipment
            machine lamp
            mechanical clamping for height adjustment and spindle stock
            electr. clamping for arm rotation
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          6.800 €
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT BP42/1170EC

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1696 · Radial Drilling Machine

          TAILIFT - BP42/1170EC - - 2011 -

          Technical details
          gebraucht ︱ 2011 ︱ 3960 ︱ prompt, Zwischenverkauf v ︱ Taiwan ︱ 12200 €︱ 1 ︱ 42 mm︱ MK 4 ︱ 280 - 1100 mm︱ 44 - 1.500 (12) U/min︱ M 25 / M 28 ︱ 1880 mm︱ 870 mm︱ 2210 mm︱ 2600 kg︱ 470 - 1.270 mm︱ 0,05 - 0,15 (3) mm/min︱ 2.2 kW︱ 280 mm︱
          coolant equipment machine lamp mechanical clamping box table new Repar2 spindle protection HYDRAULIC CLAMPING OF THE COLUMN AND THE ARM User Manual in English COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            2011
            3960
            prompt, Zwischenverkauf v
            Taiwan
            12200 €
            1
            42 mm
            MK 4
            280 - 1100 mm
            44 - 1.500 (12) U/min
            M 25 / M 28
            1880 mm
            870 mm
            2210 mm
            2600 kg
            470 - 1.270 mm
            0,05 - 0,15 (3) mm/min
            2.2 kW
            280 mm
            Description :
            coolant equipment
            machine lamp
            mechanical clamping
            box table
            new Repar2 spindle protection
            HYDRAULIC CLAMPING OF THE COLUMN AND THE ARM
            User Manual in English

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
          Datasheet
          Request / Contact
          used Radial Drilling Machine Unbekannt/Unknown WMW BR 40/2

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1222 · Radial Drilling Machine

          Unbekannt/Unknown - WMW BR 40/2 - - 1988 -

          Technical details
          gebraucht ︱ 1988 ︱ 3957 ︱ prompt, Zwischenverkauf v ︱ 8700 €︱ 1 ︱ 45 mm︱ MK 5 ︱ 30 - 1.250 mm︱ M36 ︱ 2050 mm︱ 930 mm︱ 3200 mm︱ 3850 kg︱ 280 - 1.380 mm︱ 450 - 1.400 mm︱ 360 °︱ 745 mm︱ 1.450 x 920 mm︱ 355 mm︱
          incl. dice table coolant equipment machine light electrical clamping 2 clamping surfaces new lifting spindle with guide + bearing 8 T-slots user manual in GERMAN DOES NOT COMPLY WITH THE GERMAN UVV & AUSTRIAN AMVO (NO SPINDLE PROTECTION)
            gebraucht
            1988
            3957
            prompt, Zwischenverkauf v
            8700 €
            1
            45 mm
            MK 5
            30 - 1.250 mm
            M36
            2050 mm
            930 mm
            3200 mm
            3850 kg
            280 - 1.380 mm
            450 - 1.400 mm
            360 °
            745 mm
            1.450 x 920 mm
            355 mm
            Description :
            incl. dice table
            coolant equipment
            machine light
            electrical clamping
            2 clamping surfaces
            new lifting spindle with guide + bearing
            8 T-slots
            user manual in GERMAN

            DOES NOT COMPLY WITH THE GERMAN UVV & AUSTRIAN AMVO (NO SPINDLE PROTECTION)
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT TC-1250H

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1228 · Radial Drilling Machine

          TAILIFT - TC-1250H - - -

          Technical details
          neu ︱ ca. 6 Monate ab Auftragse ︱ Taiwan ︱ 27100 €︱ 547.42 €︱ 50 mm︱ MK 5 ︱ 360 - 1.250 mm︱ 44 - 1.206 (12) U/min︱ Stahl/Guß: M40/M50 ︱ 2060 mm︱ 995 mm︱ 2240 mm︱ 2300 kg︱ 441 - 1.345 mm︱ 0,06 - 0,2 (3) mm/min︱ 3.7 kW︱ 300 mm︱ 270 mm︱ 1.785 x 785 x 190 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            27100 €
            547.42 €
            50 mm
            MK 5
            360 - 1.250 mm
            44 - 1.206 (12) U/min
            Stahl/Guß: M40/M50
            2060 mm
            995 mm
            2240 mm
            2300 kg
            441 - 1.345 mm
            0,06 - 0,2 (3) mm/min
            3.7 kW
            300 mm
            270 mm
            1.785 x 785 x 190 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with hydraulic clamping
            electric height adjustment of extension arm andhydraulic clamping
            hydraulicclamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT TPR-920A

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1212 · Radial Drilling Machine

          TAILIFT - TPR-920A - - -

          Technical details
          neu ︱ ca. 6 Monate ab Auftragse ︱ Taiwan ︱ 14600 €︱ 297.84 €︱ 32 mm︱ MK 4 ︱ 220 - 950 mm︱ 73 - 1.247 (6) U/min︱ Stahl: M 25; Guss: M 32 ︱ 1800 mm︱ 830 mm︱ 2190 mm︱ 1250 kg︱ 350 - 1.210 mm︱ 0,05 - 0,15 (3) mm/min︱ 1.5 kW︱ 210 mm︱ 220 mm︱ 1.260 x 640 x 160 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            14600 €
            297.84 €
            32 mm
            MK 4
            220 - 950 mm
            73 - 1.247 (6) U/min
            Stahl: M 25; Guss: M 32
            1800 mm
            830 mm
            2190 mm
            1250 kg
            350 - 1.210 mm
            0,05 - 0,15 (3) mm/min
            1.5 kW
            210 mm
            220 mm
            1.260 x 640 x 160 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with mechanical clamping
            electric height adjustment of extension arm and mechanical clamping
            mechanical clamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT TPR-1600H

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1234 · Radial Drilling Machine

          TAILIFT - TPR-1600H - - -

          Technical details
          neu ︱ ca. 6 Monate ab Auftragse ︱ Taiwan ︱ 48700 €︱ 983.74 €︱ 65 mm︱ MK 5 ︱ 440 - 1.580 mm︱ 40 - 1.920 (12) U/min︱ Stahl/Guß: M50/M60 ︱ 2850 mm︱ 1400 mm︱ 2940 mm︱ 4600 kg︱ 380 - 1.600 mm︱ 0,07 - 0,96 (6) mm/min︱ 5.5 kW︱ 432 mm︱ 370 mm︱ 2.480 x 1.050 x 210 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo)
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            48700 €
            983.74 €
            65 mm
            MK 5
            440 - 1.580 mm
            40 - 1.920 (12) U/min
            Stahl/Guß: M50/M60
            2850 mm
            1400 mm
            2940 mm
            4600 kg
            380 - 1.600 mm
            0,07 - 0,96 (6) mm/min
            5.5 kW
            432 mm
            370 mm
            2.480 x 1.050 x 210 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with hydraulic clamping
            electric height adjustment of extension arm andhydraulic clamping
            hydraulicclamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH

            (sample photo)
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT TPR-1100

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2032 · Radial Drilling Machine

          TAILIFT - TPR-1100 - - -

          Technical details
          neu ︱ ca. 6 Monate ab Auftragse ︱ Taiwan ︱ 18300 €︱ 373.32 €︱ 42 mm︱ MK 4 ︱ 280 - 1.100 mm︱ 44 - 1.500 (12) U/min︱ Stahl: M 25; Guss: M 38 ︱ 1880 mm︱ 870 mm︱ 2210 mm︱ 1800 kg︱ 470 - 1.270 mm︱ 0,05 - 0,15 (3) mm/min︱ 2.2 kW︱ 260 mm︱ 280 mm︱ 1.725 x 715 x 180 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            18300 €
            373.32 €
            42 mm
            MK 4
            280 - 1.100 mm
            44 - 1.500 (12) U/min
            Stahl: M 25; Guss: M 38
            1880 mm
            870 mm
            2210 mm
            1800 kg
            470 - 1.270 mm
            0,05 - 0,15 (3) mm/min
            2.2 kW
            260 mm
            280 mm
            1.725 x 715 x 180 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with mechanical clamping
            electric height adjustment of extension arm and mechanical clamping
            mechanical clamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used Radial Drilling Machine TAILIFT TC-1600H

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1230 · Radial Drilling Machine

          TAILIFT - TC-1600H - - -

          Technical details
          neu ︱ ca. 6 Monate ab Auftragse ︱ Taiwan ︱ 32200 €︱ 650.44 €︱ 50 mm︱ MK 5 ︱ 350 - 1.600 mm︱ 56 - 1.450 (12) U/min︱ Stahl/Guß: M40/M50 ︱ 2670 mm︱ 1120 mm︱ 2410 mm︱ 3300 kg︱ 465 - 1.420 mm︱ 0,06 - 0,2 (3) mm/min︱ 3.7 kW︱ 320 mm︱ 270 mm︱ 2.550 x 970 x 200 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            32200 €
            650.44 €
            50 mm
            MK 5
            350 - 1.600 mm
            56 - 1.450 (12) U/min
            Stahl/Guß: M40/M50
            2670 mm
            1120 mm
            2410 mm
            3300 kg
            465 - 1.420 mm
            0,06 - 0,2 (3) mm/min
            3.7 kW
            320 mm
            270 mm
            2.550 x 970 x 200 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with hydraulic clamping
            electric height adjustment of extension arm andhydraulic clamping
            hydraulicclamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact

          Belt Grinding Machine

          used Belt Grinding Machine Unbekannt/Unknown SCHLEIFPOWER BSM 75

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1264 · Belt Grinding Machine

          Unbekannt/Unknown - SCHLEIFPOWER BSM 75 - - 2018 -

          Technical details
          gebraucht ︱ 2018 ︱ 5479 ︱ China ︱ 1125 €︱ 900 €︱ 1 ︱ 75 mm︱ 2.000 x 75 mm︱ 530 mm︱ 3 kW︱ 75 kg︱ 34 m/s︱ 475 - 1240 mm︱ 200 mm︱
          enclosed grinding head for effective extraction system BRAKE MOTOR SUCTION UNIT thermal overload device adjustable work piece support eye protection variable working height belt quick change system high belt speed big face grinding surface quick chamfering heavy dimensioned contact wheel user manual in GERMAN and ENGLISH machine and equipment according to the CE-regulations
            gebraucht
            2018
            5479
            China
            1125 €
            900 €
            1
            75 mm
            2.000 x 75 mm
            530 mm
            3 kW
            75 kg
            34 m/s
            475 - 1240 mm
            200 mm
            Description :
            enclosed grinding head for effective extraction system
            BRAKE MOTOR
            SUCTION UNIT
            thermal overload device
            adjustable work piece support
            eye protection
            variable working height
            belt quick change system
            high belt speed
            big face grinding surface
            quick chamfering
            heavy dimensioned contact wheel
            user manual in GERMAN and ENGLISH
            machine and equipment according to the CE-regulations
          900 €
          Datasheet
          Request / Contact
          used Belt Grinding Machine Unbekannt/Unknown HESSE BG 75-2

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1270 · Belt Grinding Machine

          Unbekannt/Unknown - HESSE BG 75-2 - - 2018 -

          Technical details
          gebraucht ︱ 2018 ︱ 5492 ︱ Polen ︱ 1110 €︱ 1 ︱ 75 mm︱ 2.000 x 75 mm︱ 200 x 75 x 42 mm︱ 76 kg︱ 605 mm︱ 2 Geschwindigkeiten:1.400 ︱
          Mint condition 2 speeds closed grinding head brake motor thermal overload protection adjustable workpiece support eye protection adjustable working height grinding belt quick change system high band speed large surface grinding area quick deburring large contact wheel users manual in GERMAN machine and equipment according to the CE-regulations
            gebraucht
            2018
            5492
            Polen
            1110 €
            1
            75 mm
            2.000 x 75 mm
            200 x 75 x 42 mm
            76 kg
            605 mm
            2 Geschwindigkeiten:1.400
            Description :
            Mint condition

            2 speeds
            closed grinding head
            brake motor
            thermal overload protection
            adjustable workpiece support
            eye protection
            adjustable working height
            grinding belt quick change system
            high band speed
            large surface grinding area
            quick deburring
            large contact wheel
            users manual in GERMAN
            machine and equipment according to the CE-regulations
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   
            •
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd 2351 - Wiener Neudorf Straße 4 Objekt 8 Österreich
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd

          Straße 4 Objekt 8



          Contact Trader


            Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd
           Straße 4 Objekt 8
            2351 - Wiener Neudorf
            Österreich
            +43/2236/638 70-0
            +43/2236/636 62
            office@hesse-maschinen.com
            https://www.hesse-maschinen.com
            Contact person:
           

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Absaugung · Abwickelhaspel · Alu-Kreissäge · Anbiegemaschine · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Biegemaschine horizontal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bügelsäge · Bördelmaschine · CNC Plasma-Schneidanlage · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Einständer - Richtpresse · Einständerpresse - Hydraulisch · Exzenterpressen - Einständer · Falzformer · Flachschleifmaschine · Horizontal - Bandsägeautomat · Hydraulische Lochstanze · Kaltkreissäge · Kreisschere · Laserschneidmaschine · Lochstanze · Längs- und Querteilanlage · Profilstahlschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Schwenkbiegemaschine · Sickenmaschine · Spitzendrehmaschine · Stanz- und Nibbelmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Topfschleifmaschine · Viersäulenpresse - Hydraulisch · Vorschubapparat · Wasserstrahlschneidanlage · Werkstattpresse - hydraulisch · Werkzeugschleifmaschine - Universal ·
          Compendio
          Software
          Contenuto di macchine usate
          Privacy
          Seguici
          © 2000-2023, Logotech oHG · Software e servizi Internet - Tutti i diritti riservati