IproMac e.K. Willi Schneegaß - Stockist for used machines

turning diameter over bed 315 mm︱turning diameter over slide rest 630 mm︱turning length 1500 mm︱total power requirement 5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,6 x 0,7 m︱

---

turning diameter 555 mm︱turning length 1000 mm︱turning diameter over slide 290 mm︱3-jaw-chuck diameter 315 mm︱make Röhn ︱control Monforts MTCK︱quick change tool holder Multifix C ︱steady ︱turning speeds 2-2800 U/min︱transmission ratio 3 ︱face slide travel 235 mm︱spindle passage 70 mm︱tailstock quill taper MT 5 ︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,9 x 1,6 x 1,8 m︱

---

About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.

turning diameter 1100 mm︱swing diameter 1400 mm︱turning height 1000 mm︱Control Fanuc i Serie ︱total power requirement 45 kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. 4,5 x 4,8 x 4,1 m︱

---

used CNC vertical lathe Manufacturer Doosan, type Puma VT 1100 with Fanuc i series max turning diameter 1100 mm max turning height 1000 mm Drive power main spindle 45 KW Machine weight approx. 22 tons equipment and accessories faceplate 1100 mm Tool turret 12 times chip conveyor tool cabinet with various accessories. - 12 tool holders for turrets - 3 sets of clamping jaws - approx. 50 turning tools - 1 drawer full of inserts

turning diameter 500 mm︱swing diameter 520 mm︱turning height mm︱Control Siemens 840 D ︱total power requirement 55 kW︱weight of the machine ca. 13,0 t︱dimensions of the machine ca. 3,95 X 1,57 x 3,20 m︱

---

Vertical lathe EMAG VSC 500 C-axis driven tools Control unit: Siemens 840D Workspace max. chuck diameter 500 mm Swing diameter 520 mm X-axis travel 1000 mm Z-axis travel 400 mm main spindle max. speed 3400 rpm Spindle bearing 160 mm main drive Maximum power 71 KW full power from 900 rpm maximum torque 750 Nm Holding torque continuous operation 480 Nm feed drive Rapid traverse X-axis 45 m/min Rapid traverse Z-axis 30 m/min Feed force in X + Z 11 KN disc revolver Recordings 12 DIN 69880 of which 12 are driven Shaft diameter 50 mm Electrical equipment 400 / 24 / 230 volts - 50 Hz Connected load 55 KW dimensions + weight L x W x H 3.95 x 1.57 x 3.2 m Weight 13500kg EQUIPMENT and ACCESSORIES 12x live tool turret 12x50 SW440, max. speed 6000 rpm, max torque 60 Nm direct path measuring systems in X + Z C-axis interpolation with X - and Z-axis, speed 0-100 rpm, Positioning accuracy 0.01 degrees open automation standard D=440 mm with workpiece diameter 500 mm, height 200 mm Chip conveyor hinged belt with brush discharge to the rear, discharge height 1250 mm Coolant device standard 80 liters at 8 bar / content 450 liters Extraction of mechanical filters Air volume 1000 cbm/h Lining diameter 500 mm Tools according to DIN 69880 Prepared for workpiece measurement Tools needed about 55 pcs fixed + powered tools

bore capacity in steel (diameter) 90 mm︱arm length 2500 mm︱workpiece height max. 1600 mm︱total power requirement 7,5 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 3,6 x 1,6 x 3,6 m︱

---

Drilling capacity in steel (diameter): 90 mm Outreach: 2500 mm Workpiece height - max.: 1600 mm Tool holder: 6 MK Machine weight approx.: 9.5 t Space requirement approx.: 3.6 x 1.55 x 3.6 m

x-travel 800 mm︱y-travel 400 mm︱z-travel 450 mm︱Control MSC 518 ︱total power requirement / kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 2,0 x 2,5 x 2,98 m︱

---

with CNC control Mori-Seiki MSC 518 Table size 900 x 450 mm traverse paths X axis 800mm Y axis 400mm Z axis 450mm Tool holder ISO 40 max. spindle speed 8000 rpm electrical connection 400 volts Cotpnyx Dimensions: 2200x2450x2980mm Machine weight 6500 kg Spindle power 7.5 KW Tool changer 40 times

cutting diameter 10 - 410 mm︱saw band length 5730 mm︱cutting width 510 mm︱Control NC ︱total power requirement 3,8 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 2,8 x 2,9 x 2,3 m︱

---

utting area Round material 10 - 410 mm Vv82na Flat material 510 x 410 mm Cutting speed 15 - 110 m/min Saw band size 5730 x 41 x 1.3 mm Engine power 3.8 KW electrical connection 400 volts Machine weight 3200 kg Dimensions 2800x2900x2240mm operating hours: Hydraulic ON = 2329 hours Saw ON = 1679 hrs EQUIPMENT chip conveyor Roller conveyor 4100 x 700 x 860 mm, roller width 550 mm discharge table flush gun

pressure 5 t︱throat 200 mm︱stroke 200 mm︱total power requirement 1 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,0 x 1,0 x 1,5 m︱

---

pressure 35 t︱throat 400 mm︱stroke 90-210 mm︱table: 780 x 600 ︱total power requirement 7,5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,6 x 1,7 x 2,4 m︱

---

Pressure: 35 t Stroke: 90 - 210mm Table surface: 780 x 600 mm Plunger adjustment: 45 mm B3iegxtrlr Required space (WxDxH): 1.6 x 175 x 2.4 m with protective screen control according to DIN PH Black

x-axis 2000 mm︱y-axis 1500 mm︱z-axis 750 mm︱burner heads 1 3 D︱laser capacity in Watt 2700 ︱

---

TruLaser Cell 7020 Maschine Nr. A0421A0099 Typ: L13 standard equipment - X = 2000, Z = 750mm; B = +/- 135°; C = n x 360° - Laser TruFlow 2700 - Position laser diode - Stationary, rotatable pendant control panel - Teach panel - Teach software - Magnetic clutch, head detection - Laser power control - Power Cycles - Logbook function - focus line - Nitrogen jet aeration - Network connection including installation via teleservice - Analog modem for teleservice - Lighting boom - Documentation twice Deviating from this standard equipment or in addition the machine TruLaser Cell 7020 is equipped with: With the following configuration: Frequency 50Hz Voltage 400 V0 Electrical regulation IEC Language operating instructions German Number of operating instructions 2 pc Color standard RAL9002/5010 TruFlow 2700 laser cutting Incl. 2 cutting gases (02, N2), APC distance control, p Programmable cutting gas selection, adjustment device, Analog value cutting, pressure setting, valves Additional cutting gas argon Cutting optics f = 155 mm incl. sensor Stationary table 2000x1500 mm Second cutting optics (240 mm) Work table suction system including piping Compact deduster with 2000 Nm3/h including spark pre-separator, extraction pipe connection, for 1 active extraction point Protective cabin including separate extraction Special cover of the cabin top / roof Automatic sliding door in front Control panel including multi-button, acknowledgment and emergency stop Documentation twice / German Annual service by Trumpf Service with proof The machine is delivered without additional Programming software, post processor and operator course. We recommend that you contact us to put it back into operation to the Trumpf service in your area. Operating hours / as of 02/2022 Machine hours: 40,600h Laser on: 39,200h Beam on: 6,900h Last laser power measurement = 2790 watts

feed pressure 30 bar︱liter capacity 2900 / min l︱total power requirement 7,5 kW︱

---

voltage 230 V︱current 16 A︱output 3 kw︱working pressure 6 bar︱Number of boilers 1 ︱Steam production 5 kg/h︱Boiler temperature 165 °C︱Temperature at the nozzle (Steam) 120 °C︱Temperature at the nozzle (Steam+Water/Detergent) 90 °C︱Water tank capacity 5 l︱Detergent tank capacity 5 l︱water consumption 3,5 l/h︱Maximum length of hose 4 m︱Setting at work 4 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 500 mm︱width 450 mm︱height 850 mm︱weight 28 kg︱

---

Dry steam cleaner with suction Mach. No. 3449/19 TECHNICAL SPECIFICATIONS DRY VACUUM CLEANER - 3 circuit system steam steam and water + detergent Suction with blowing function - Voltage 220V 50Hz - Power 3000 watts - Steam production 5 kg/h - temperature 165°C in the boiler, up to 120°C at the nozzle outlet - Steam pressure 6 bar - Water tank 1 x 5 l (enough for approx. 1.5 hours) - Detergent tank 1 x 5 l - Mobile - Connection cable 5 m long - Case stainless steel - Dimensions L 500 x W 450 x H 850 mm - Weight 28kg - Ready to use in 4 minutes incl. accessories NEW PRICE EURO 2950,-

voltage 400 V︱current 63 A︱output 36 kw︱Production at 30924 kcal/h︱working pressure 10 bar︱Number of boilers 4 ︱Steam production 60 kg/h︱Boiler temperature 188 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 2 X50 l︱Detergent tank capacity 10 l︱water consumption 60 l/h︱Maximum length of hose 2 X 8 m︱Setting at work 5 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 1055 mm︱width 700 mm︱height 815 mm︱

---

Electronic steam generator and cleaning system Mach. No. 64002/12/16 - Electronically controlled - 3 circuit system steam steam and detergent steam and water - Voltage 400V/3-phase - Connection cable 5-pin, 8m long - Power 36,000 watts / 63 A - Steam production 60 kg/h - Steam pressure max. 12 bar - Temperature 188°C in the boiler up to 150°C at the nozzle outlet - Temperature steam-water mixture up to 100° - Water storage tank 2x50 liters - Detergent dosing and regulation - Hour meter - mobile / 2 wheels lockable - Hangers for hose and connection cable - 2nd working connections Accesories: 1 hose package with handle control (IP70/01 10m Reinforced Program) 1 long lance 1 lance short 1 brush holder 40 cm with round brush Completely workshop tested and repaired - Test according to BGV-A3 - Test run 1 hour

voltage 400 V︱current 16 A︱output 9 kw︱Production at kcal/h︱working pressure 10/12 bar︱Number of boilers 1 ︱Steam production 15 kg/h︱Boiler temperature 188 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 50 l︱Detergent tank capacity 1,4 l︱water consumption 15 l/h︱Maximum length of hose 8 m︱Setting at work 4 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 880 mm︱width 540 mm︱height 910 mm︱

---

Mobile steam cleaning system Mach. No. RSU09/628257/11 - Electronic - 3 circuit system steam steam and detergent steam and water - Voltage 400V - Power 9,000 watts - Steam production 15 kg/h 0m0sjgs - temperature 188°C in the boiler, up to 150°C at the nozzle outlet - Steam pressure 10/12 bar - Water tank 1 x 50 l - Storage tank for detergent concentrate 1 x 1.4 l - Detergent dosing and regulation - Hour meter - mobile / 2 wheels lockable - 5-pin connection cable, 8 m long - Prepared for suction connection with socket 230 V - Case stainless steel - Dimensions L880 x W540 x H910 - Weight 80 kg Accesories: 8 m hose package with handle control 1 X Lance Long 1 X lance short Other optional accessories on request The system is workshop tested and overhauled Warranty 3 months

voltage 400 V︱current 16 A︱output 9 kw︱Production at kcal/h︱working pressure 10/12 bar︱Number of boilers 1 ︱Steam production 15 kg/h︱Boiler temperature 188 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 50 l︱Detergent tank capacity 1,4 l︱water consumption 15 l/h︱Maximum length of hose 8 m︱Setting at work 4 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 880 mm︱width 540 mm︱height 910 mm︱

---

Mobile steam cleaning system Mach. No. RSU09/628182/09 - Electronic - 3 circuit system steam steam and detergent steam and water - Voltage 400V - Power 9,000 watts - Steam production 15 kg/h 0m0sjgs - temperature 188°C in the boiler, up to 150°C at the nozzle outlet - Steam pressure 10/12 bar - Water tank 1 x 50 l - Storage tank for detergent concentrate 1 x 1.4 l - Detergent dosing and regulation - Hour meter - mobile / 2 wheels lockable - 5-pin connection cable, 8 m long - Prepared for suction connection with socket 230 V - Case stainless steel - Dimensions L880 x W540 x H910 - Weight 80 kg Accesories: 8 m hose package with handle control 1 X Lance Long 1 X lance short Other optional accessories on request The system is workshop tested and overhauled Warranty 3 months

voltage 400 V︱current 16 A︱output 9 kw︱Production at kcal/h︱working pressure 10/12 bar︱Number of boilers 1 ︱Steam production 15 kg/h︱Boiler temperature 188 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 50 l︱Detergent tank capacity 1,4 l︱water consumption 15 l/h︱Maximum length of hose 8 m︱Setting at work 4 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 880 mm︱width 540 mm︱height 910 mm︱

---

Mobile steam cleaning system Mach. No. RSU09/628194/09 - Electronic - 3 circuit system steam steam and detergent steam and water - Voltage 400V - Power 9,000 watts - Steam production 15 kg/h 0m0sjgs - temperature 188°C in the boiler, up to 150°C at the nozzle outlet - Steam pressure 10/12 bar - Water tank 1 x 50 l - Storage tank for detergent concentrate 1 x 1.4 l - Detergent dosing and regulation - Hour meter - mobile / 2 wheels lockable - 5-pin connection cable, 8 m long - Prepared for suction connection with socket 230 V - Case stainless steel - Dimensions L880 x W540 x H910 - Weight 80 kg Accesories: 8 m hose package with handle control 1 X Lance Long 1 X lance short Other optional accessories on request The system is workshop tested and overhauled Warranty 3 months

voltage 400 V︱current 32 A︱output 18 kw︱Production at 15462 kcal/h︱working pressure 10 bar︱Number of boilers 2 ︱Steam production 30 kg/h︱Boiler temperature 179 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 110 l︱Detergent tank capacity 2 x 1,4 l︱water consumption 30 l/h︱Maximum length of hose 8 m︱Setting at work 5 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 1055 mm︱width 700 mm︱height 815 mm︱

---

Electronic steam generator and cleaning system Masch. No. 90106/05 - Electronically controlled - 3 circuit system steam steam and water Steam and water cleaning agents - Voltage 400V/3-phase - Connection cable 5-pin, 8m long - Auto polarity switch - Power 18,000 watts - Temperature 180°C in the boiler up to 120-150°C at the nozzle outlet - Temperature of steam-water mixture up to 100° C - Steam pressure max. 10 bar - Storage tank 1 x 110 l - Detergent concentrate containers 2 x 1.4 l - Additive dosing system - Connection for vacuum cleaner 400 V / 3-phase - mobile / 2 wheels lockable - Hangers for hose and connection cable - Housing powder-coated RAL 5015 - Dimensions L1055 x W700 x H815 - Weight 165 kg Accesories: Hose package 4m analogue (IP10/03) Lance long 78 cm Completely workshop tested and repaired - Test according to BGV-A3 - Test run 1 hour

voltage 400 V︱current 16 A︱output 9 kw︱Production at kcal/h︱working pressure 8/10 bar︱Number of boilers 1 ︱Steam production 15 kg/h︱Boiler temperature 179 °C︱Temperature at the nozzle (Steam) 140 °C︱Temperature at the nozzle (Steam+Water/Detergent) 90 °C︱Water tank capacity 20 l︱Detergent tank capacity 20 l︱water consumption 15 l/h︱Maximum length of hose 8 m︱Setting at work 4 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 880 mm︱width 540 mm︱height 910 mm︱

---

Mobile steam cleaning system Masch. No. 28249/04 - Electronic - 3 circuit system steam steam and water steam and detergent - Voltage 400V - Power 9,000 watts - temperature 179°C in the boiler, up to 140°C at the nozzle outlet - Steam pressure 10 bar - Water tank 1 x 20 l - Storage tank for detergent concentrate 1 x 20 l - mobile / 2 wheels lockable - 5-pin connection cable, 8 m long - Prepared for suction connection with socket 230 V - Housing powder-coated / painted - Dimensions L900 x W520 x H680 - Weight 80 kg Included: - hose package analogue 1/2" 6 m needed - Lance long used The system is workshop tested

voltage 400 V︱current 32 A︱output 18 kw︱Production at 15462 kcal/h︱working pressure 10 bar︱Number of boilers 2 ︱Steam production 30 kg/h︱Boiler temperature 179 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 110 l︱Detergent tank capacity 1,4 l︱water consumption 30 l/h︱Maximum length of hose 8 m︱Setting at work 5 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 1610 mm︱width 470 mm︱height 1300 mm︱

---

Stationary steam generator and cleaning system Mach. No. 1300016/03 - Electronically controlled - 1 workstation connection - 2 circuit system steam steam and detergent - Voltage 400V/3-phase - Auto polarity switch - Power 18 KW - Heat output 15,462 kcal/h - Working pressure max. 10 bar - Number of steam generators 2 - Stainless steel boiler - Steam output 30 kg/h - Temperature 188°C in the boiler - Temperature at the nozzle outlet (steam) 120-150° C - Water consumption 30 l/h (at 100% utilization) - Temperature at the nozzle outlet (steam + cleaning agent) 100° C - Main steam valve - Electropneumatic - 5 l detergent concentrate container - Operating hours display230 - Case stainless steel - Dimensions approx. 1610 x 470 x 1300 mm - Weight 230 kg completely workshop tested and overhauled.

voltage 400 V︱current 32 A︱output 18 kw︱Production at 15462 kcal/h︱working pressure 10 bar︱Number of boilers 2 ︱Steam production 30 kg/h︱Boiler temperature 179 °C︱Temperature at the nozzle (Steam) 150 °C︱Temperature at the nozzle (Steam+Water/Detergent) 100 °C︱Water tank capacity 110 l︱Detergent tank capacity 2 x 1,4 l︱water consumption 30 l/h︱Maximum length of hose 8 m︱Setting at work 5 min︱Working hours per day 24 h︱Predisosed for suction facility ja ︱length 1055 mm︱width 700 mm︱height 815 mm︱

---

Electronic steam generator and cleaning system Masch. No. 90022/02 - Electronically controlled - 3 circuit system steam steam and water Steam and water cleaning agents - Voltage 400V/3-phase - Connection cable 5-pin, 8m long - Auto polarity switch - Power 18,000 watts - Temperature 180°C in the boiler up to 120-150°C at the nozzle outlet - Temperature of steam-water mixture up to 100° C - Steam pressure max. 10 bar - Storage tank 1 x 110 l - Detergent concentrate containers 2 x 1.4 l - Additive dosing system - Connection for vacuum cleaner 400 V / 3-phase - mobile / 2 wheels lockable - Hangers for hose and connection cable - Housing powder-coated RAL 5015 - Dimensions L1055 x W700 x H815 - Weight 165 kg Accesories: Hose package 4m analogue (IP10/03) Lance long 78 cm Completely workshop tested and repaired - and Obsolete - Test according to BGV-A3 - Test run 1 hour

Air volume 140 m³/h︱temperature max. 80 °︱blower power 12 kW︱total power requirement 13,1 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 4 x 2 x 3 m︱

---

description SOMOS RD140 dryer with GRP hopper Somos dryers dry with dry air. Year of construction 07/92 Connection value 13.1 KW heating output 12 KW drive power 1.1 KW Equipment: 4 drying hoppers, each with a volume of 140 l, 4 coupling stations

Steam production 120 kg/h︱working pressure 10 bis 12 bar︱ 72 KW kw︱Number of boilers 8 ︱weight 450 kg︱Dimensions (L/W/H) 2000 X 800 x 1800 mm︱

---

Discription: Industrial steam generator GIOVE 72 KW Quick steam generators Stationary - Electronically controlled - 1-circuit system steam - Voltage 400 V / 3-phase - Power 72 KW - thermal output 61 848 kcal / h - Working pressure max. 12 bar - Number of steam generators 8 - Steam output 120 kg / h - Temperature 188 ° C in the boiler - Temperature at the nozzle outlet (steam) 150 ° C - 1 access to supplies of external customers - Water consumption 120 l / h at 100% load - Feedwater submission / submission tank in Giove - Boiler drain system Ventury / semiautomatic - Interface / Control (potential free contacts) - Housing stainless steel dimensions: Length: 2 m x Width: 0.8 m x Height: 1.8 m Weight: 450kg Compl. Rebuilt in 2021 Manufacturer Approved Dez.2022 / Warranty: 3 Months