Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Karl Günter Wirths GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe TOS SUS63x1250


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000139 · Center Lathe

          TOS - SUS63x1250 - - 1980 -

          Technical details
          turning diameter over bed 0655 mm︱turning diameter over slide rest 390 mm︱turning length 1250 mm︱spindle bore 82 mm︱spindle turning speed range 9-1120 U/min︱feeds 0,049-3 mm/U︱total power requirement 12 kW︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 3,5 x 1,9 x 1,7 m︱
          Machine has 3 jaw chuck and 4 position tool holder.
            turning diameter over bed 0655 mm
            turning diameter over slide rest 390 mm
            turning length 1250 mm
            spindle bore 82 mm
            spindle turning speed range 9-1120 U/min
            feeds 0,049-3 mm/U
            total power requirement 12 kW
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 3,5 x 1,9 x 1,7 m
            Description :
            Machine has 3 jaw chuck and 4 position tool holder.
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe GMW HL 1070 x 2000 (3000- 7000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203411 · CNC Lathe

          GMW - HL 1070 x 2000 (3000- 7000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1070 mm︱turning length 2300 (3300- 7300) mm︱control Siemens 828 D ︱turning diameter over slide rest 680 mm︱spindle turning speed range 1 - 800 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 356) mm︱rapid travel - longitudinal/face 10/8 m/min︱switching steps 4 ︱face slide travel 580 mm︱max. workpiece weight between centres 8000 (++) kg︱bed width 665 mm︱total power requirement 22/26 kW︱weight of the machine ca. 12,3 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m. Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1070 mm
            turning length 2300 (3300- 7300) mm
            control Siemens 828 D
            turning diameter over slide rest 680 mm
            spindle turning speed range 1 - 800 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 356) mm
            rapid travel - longitudinal/face 10/8 m/min
            switching steps 4
            face slide travel 580 mm
            max. workpiece weight between ce. 8000 (++) kg
            bed width 665 mm
            total power requirement 22/26 kW
            weight of the machine ca. 12,3 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m.
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1900 x 2000 (3000- 15000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203417 · CNC Lathe

          GMW - HL 1900 x 2000 (3000- 15000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1900 mm︱turning length 2000 (3000- 15000) mm︱control Siemens 828 D ︱turning diameter over slide rest 1400 mm︱spindle turning speed range 1- 400 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 532) mm︱rapid travel - longitudinal/face 6 m/min︱switching steps 4 ︱face slide travel 1050 mm︱max. workpiece weight between centres 15000 kg︱bed width 1120 mm︱total power requirement 37/45 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m (2- 15 m). Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1900 mm
            turning length 2000 (3000- 15000) mm
            control Siemens 828 D
            turning diameter over slide rest 1400 mm
            spindle turning speed range 1- 400 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 532) mm
            rapid travel - longitudinal/face 6 m/min
            switching steps 4
            face slide travel 1050 mm
            max. workpiece weight between ce. 15000 kg
            bed width 1120 mm
            total power requirement 37/45 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m (2- 15 m).
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1170 x 2000 (3000- 7000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203410 · CNC Lathe

          GMW - HL 1170 x 2000 (3000- 7000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1170 mm︱turning length 2300 (3300- 7300) mm︱control Siemens 828 D ︱turning diameter over slide rest 780 mm︱spindle turning speed range 1 - 680 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 356) mm︱rapid travel - longitudinal/face 10/8 m/min︱switching steps 4 ︱face slide travel 680 mm︱max. workpiece weight between centres 8000 kg︱bed width 665 mm︱total power requirement 22/26 kW︱weight of the machine ca. 13,3 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m. Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1170 mm
            turning length 2300 (3300- 7300) mm
            control Siemens 828 D
            turning diameter over slide rest 780 mm
            spindle turning speed range 1 - 680 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 356) mm
            rapid travel - longitudinal/face 10/8 m/min
            switching steps 4
            face slide travel 680 mm
            max. workpiece weight between ce. 8000 kg
            bed width 665 mm
            total power requirement 22/26 kW
            weight of the machine ca. 13,3 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m.
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1270 x 2000 (3000- 7000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203412 · CNC Lathe

          GMW - HL 1270 x 2000 (3000- 7000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1270 mm︱turning length 2300 (3300- 7300) mm︱control Siemens 828 D ︱turning diameter over slide rest 880 mm︱spindle turning speed range 1 - 680 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 356) mm︱rapid travel - longitudinal/face 10/8 m/min︱switching steps 4 ︱face slide travel 780 mm︱max. workpiece weight between centres 8000 kg︱bed width 665 mm︱total power requirement 22/26 kW︱weight of the machine ca. 14,3 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m. Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1270 mm
            turning length 2300 (3300- 7300) mm
            control Siemens 828 D
            turning diameter over slide rest 880 mm
            spindle turning speed range 1 - 680 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 356) mm
            rapid travel - longitudinal/face 10/8 m/min
            switching steps 4
            face slide travel 780 mm
            max. workpiece weight between ce. 8000 kg
            bed width 665 mm
            total power requirement 22/26 kW
            weight of the machine ca. 14,3 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m.
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1800 x 2000 (3000- 15000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203415 · CNC Lathe

          GMW - HL 1800 x 2000 (3000- 15000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1800 mm︱turning length 2000 (3000- 15000) mm︱control Siemens 828 D ︱turning diameter over slide rest 1300 mm︱spindle turning speed range 1- 400 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 532) mm︱rapid travel - longitudinal/face 6 m/min︱switching steps 4 ︱face slide travel 1050 mm︱max. workpiece weight between centres 15000 kg︱bed width 1120 mm︱total power requirement 37/45 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m (2- 15 m). Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1800 mm
            turning length 2000 (3000- 15000) mm
            control Siemens 828 D
            turning diameter over slide rest 1300 mm
            spindle turning speed range 1- 400 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 532) mm
            rapid travel - longitudinal/face 6 m/min
            switching steps 4
            face slide travel 1050 mm
            max. workpiece weight between ce. 15000 kg
            bed width 1120 mm
            total power requirement 37/45 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m (2- 15 m).
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1620 x 2000 (3000- 8000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203416 · CNC Lathe

          GMW - HL 1620 x 2000 (3000- 8000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1620 mm︱turning length 2300 (3300- 8300) mm︱control Siemens 828 D ︱turning diameter over slide rest 1200 mm︱spindle turning speed range 1- 500 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 532) mm︱rapid travel - longitudinal/face 6 m/min︱switching steps 4 ︱face slide travel 900 mm︱max. workpiece weight between centres 12000 kg︱bed width 850 mm︱total power requirement 30/37 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m (2- 8 m). Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1620 mm
            turning length 2300 (3300- 8300) mm
            control Siemens 828 D
            turning diameter over slide rest 1200 mm
            spindle turning speed range 1- 500 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 532) mm
            rapid travel - longitudinal/face 6 m/min
            switching steps 4
            face slide travel 900 mm
            max. workpiece weight between ce. 12000 kg
            bed width 850 mm
            total power requirement 30/37 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m (2- 8 m).
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 2000 x 2000 (3000- 15000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203418 · CNC Lathe

          GMW - HL 2000 x 2000 (3000- 15000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 2000 mm︱turning length 2000 (3000- 15000) mm︱control Siemens 828 D ︱turning diameter over slide rest 1500 mm︱spindle turning speed range 1- 400 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 532) mm︱rapid travel - longitudinal/face 6 m/min︱switching steps 4 ︱face slide travel 1050 mm︱max. workpiece weight between centres 15000 kg︱bed width 1120 mm︱total power requirement 37/45 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m (2- 15 m). Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 2000 mm
            turning length 2000 (3000- 15000) mm
            control Siemens 828 D
            turning diameter over slide rest 1500 mm
            spindle turning speed range 1- 400 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 532) mm
            rapid travel - longitudinal/face 6 m/min
            switching steps 4
            face slide travel 1050 mm
            max. workpiece weight between ce. 15000 kg
            bed width 1120 mm
            total power requirement 37/45 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m (2- 15 m).
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1520 x 2000 (3000- 8000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203414 · CNC Lathe

          GMW - HL 1520 x 2000 (3000- 8000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1520 mm︱turning length 2300 (3300- 8300) mm︱control Siemens 828 D ︱turning diameter over slide rest 1100 mm︱spindle turning speed range 1- 500 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 532) mm︱rapid travel - longitudinal/face 6 m/min︱switching steps 4 ︱face slide travel 900 mm︱max. workpiece weight between centres 12000 kg︱bed width 850 mm︱total power requirement 30/37 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m (2- 8 m). Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1520 mm
            turning length 2300 (3300- 8300) mm
            control Siemens 828 D
            turning diameter over slide rest 1100 mm
            spindle turning speed range 1- 500 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 532) mm
            rapid travel - longitudinal/face 6 m/min
            switching steps 4
            face slide travel 900 mm
            max. workpiece weight between ce. 12000 kg
            bed width 850 mm
            total power requirement 30/37 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m (2- 8 m).
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe GMW HL 1420 x 2000 (3000- 8000)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203413 · CNC Lathe

          GMW - HL 1420 x 2000 (3000- 8000) - - 2022 - Siemens 828 D

          Technical details
          turning diameter 1420 mm︱turning length 2300 (3300- 8300) mm︱control Siemens 828 D ︱turning diameter over slide rest 1000 mm︱spindle turning speed range 1- 500 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 (230- 532) mm︱rapid travel - longitudinal/face 6 m/min︱switching steps 4 ︱face slide travel 900 mm︱max. workpiece weight between centres 12000 kg︱bed width 850 mm︱total power requirement 30/37 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered only with a single tool post (Multifix). It could be delivered also with a 12 position Sauter turret. Machine could be ordered in different length, available in steps of 1 m (2- 8 m). Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock,machine LED light and on request with 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1420 mm
            turning length 2300 (3300- 8300) mm
            control Siemens 828 D
            turning diameter over slide rest 1000 mm
            spindle turning speed range 1- 500 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 (230- 532) mm
            rapid travel - longitudinal/face 6 m/min
            switching steps 4
            face slide travel 900 mm
            max. workpiece weight between ce. 12000 kg
            bed width 850 mm
            total power requirement 30/37 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine shown on the photos was ordered
            only with a single tool post (Multifix). It could be delivered also with a 12
            position Sauter turret. Machine could be ordered in different length, available
            in steps of 1 m (2- 8 m).
            Accessories: Machine with housing (CE conform), chip conveyor, three jaw chuck,
            steady, cooling arrangement, hydraulic tailstock,machine LED light and on
            request with 2 electronic hand wheels for X and Z axes.
            Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          used  CNC Lathe DMG-GILDEMEISTER CTX 510 Ecoline


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203434 · CNC Lathe

          DMG-GILDEMEISTER - CTX 510 Ecoline - - 2012 - 840 DSL Siemens

          Technical details
          turning diameter over bed 0680 mm︱turning length 1050 mm︱control 840 DSL Siemens︱turning diameter over bed slide 465 mm︱spindle turning speed - stepless 25- 3250 U/min- rpm︱spindle bore 102,5 mm︱feeds 0- 30 m/min︱rapid power traverse in X-and Z direction 30 m/min︱voltage 400 V︱connected load 50 KVA︱face slide travel 300 mm︱longitudinal travel 1050 mm︱dimensions of the machine ca. 6,5 x 3 x 2,2 m︱taper diameter VDI 40 mm︱toolpiece turning speed range 0- 4000 U/min︱work piece power 8,4 kW︱main drive motor 33/22 kW︱
          Has 12 position turret with live tooling (C- axe), power chuck KNCS N 260, with tailstock, cooling arrangement and chip conveyor. Only 9670 spindle hours. Control: Siemens 840 DSL
            turning diameter over bed 0680 mm
            turning length 1050 mm
            control 840 DSL Siemens
            turning diameter over bed slide 465 mm
            spindle turning speed - stepless 25- 3250 U/min- rpm
            spindle bore 102,5 mm
            feeds 0- 30 m/min
            rapid power traverse in X-and Z . 30 m/min
            voltage 400 V
            connected load 50 KVA
            face slide travel 300 mm
            longitudinal travel 1050 mm
            dimensions of the machine ca. 6,5 x 3 x 2,2 m
            taper diameter VDI 40 mm
            toolpiece turning speed range 0- 4000 U/min
            work piece power 8,4 kW
            main drive motor 33/22 kW
            Description :
            Has 12 position turret with live tooling (C- axe), power chuck KNCS N 260, with
            tailstock, cooling arrangement and chip conveyor. Only 9670 spindle hours.
            Control: Siemens 840 DSL
          Datasheet
          Request / Contact
          used  CNC Lathe HAAS SL-30BHE


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203431 · CNC Lathe

          HAAS - SL-30BHE - - 2005 - Haas

          Technical details
          turning diameter over bed 0760 mm︱turning length 864 mm︱control Haas ︱turning diameter over bed slide 450 mm︱spindle turning speed - stepless 0- 3400 U/min︱spindle bore 105 mm︱feeds m/min︱rapid power traverse in X-and Z direction m/min︱voltage 400 V︱connected load 28 KVA︱face slide travel 287 mm︱longitudinal travel 864 mm︱dimensions of the machine ca. 3,2 x 2 x 2 m︱taper diameter mm︱max. workpiece weight between centers kg︱
          With 12 position turret, power chuck, big spindle bore and tool presetter. Machine is without tailstock.
            turning diameter over bed 0760 mm
            turning length 864 mm
            control Haas
            turning diameter over bed slide 450 mm
            spindle turning speed - stepless 0- 3400 U/min
            spindle bore 105 mm
            voltage 400 V
            connected load 28 KVA
            face slide travel 287 mm
            longitudinal travel 864 mm
            dimensions of the machine ca. 3,2 x 2 x 2 m
            Description :
            With 12 position turret, power chuck, big spindle bore and tool presetter.
            Machine is without tailstock.
          Datasheet
          Request / Contact
          used  CNC Lathe OKUMA-HOWA ACT-3


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203433 · CNC Lathe

          OKUMA-HOWA - ACT-3 - - 1990 - Fanuc 6T

          Technical details
          turning diameter over bed 0320 mm︱turning length 550 mm︱control Fanuc 6T ︱turning diameter over bed slide 230 mm︱greates pass round over bed 465 mm︱spindle turning speed - stepless 0- 3500 U/min︱spindle bore 58 mm︱feeds 0- 10 m/min︱rapid power traverse in X-and Z direction 15 m/min︱voltage 400 V︱connected load 20 KVA︱dimensions of the machine ca. 2,7 x 1,8 x 2,2 m︱max. workpiece weight between centers kg︱
          With 10 position turret, power chuck and tailstock automatic movable.
            turning diameter over bed 0320 mm
            turning length 550 mm
            control Fanuc 6T
            turning diameter over bed slide 230 mm
            greates pass round over bed 465 mm
            spindle turning speed - stepless 0- 3500 U/min
            spindle bore 58 mm
            feeds 0- 10 m/min
            rapid power traverse in X-and Z . 15 m/min
            voltage 400 V
            connected load 20 KVA
            dimensions of the machine ca. 2,7 x 1,8 x 2,2 m
            Description :
            With 10 position turret, power chuck and tailstock automatic movable.
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe GMW HL630x120x15


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-20201 · Heavy Duty Lathe

          GMW - HL630x120x15 - - 2019 - 840 DSL Siemens

          Technical details
          turning diameter over bed 6300 mm︱turning diameter over slide rest 5000 mm︱turning length 15500 mm︱Control 840 DSL Siemens︱max. workpiece weight between centres 120 t︱chucking diameter 3200 mm︱bed width 2050 (x2) mm︱spindle bore 300 mm︱spindle turning speed range 0,2- 30 U/min︱cross movement 1600 mm︱main drive 160 kW︱clamping length 15000 mm︱workpiece stroke - max. 400 mm︱total power requirement 200 kW︱weight of the machine ca. 400 t︱dimensions of the machine ca. 24 x 7 x 7 m︱
          Control: Siemens 840 DSL. Machine has hydrostatic guideways, Heidenhain scales, 2 roller supports (open steadies), chip conveyor, optional C- axe, optional ATC, optional automatc chuck, etc. Turning length could be increased by 5 m bed pieces.
            turning diameter over bed 6300 mm
            turning diameter over slide rest 5000 mm
            turning length 15500 mm
            Control 840 DSL Siemens
            max. workpiece weight between ce. 120 t
            chucking diameter 3200 mm
            bed width 2050 (x2) mm
            spindle bore 300 mm
            spindle turning speed range 0,2- 30 U/min
            cross movement 1600 mm
            main drive 160 kW
            clamping length 15000 mm
            workpiece stroke - max. 400 mm
            total power requirement 200 kW
            weight of the machine ca. 400 t
            dimensions of the machine ca. 24 x 7 x 7 m
            Description :
            Control: Siemens 840 DSL. Machine has hydrostatic guideways, Heidenhain scales,
            2 roller supports (open steadies), chip conveyor, optional C- axe, optional
            ATC, optional automatc chuck, etc.
            Turning length could be increased by 5 m bed pieces.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled GORNATI CMG 750 NSXP


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203402 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und ein Halter auf Capto.
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und
            ein Halter auf Capto.
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled NEF Plus 500


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203428 · Lathe - cycle-controlled

          NEF - Plus 500 - - 1998 - Heidenhain MP

          Technical details
          turning diameter 0500 mm︱turning length 1000 mm︱control Heidenhain MP︱turning dia. over face-slide 290 mm︱spindle bore 70 mm︱spindle turning speed range 8- 2800 U/min︱feeds - longitudinal 0- 5000 mm/min︱feeds - cross 0- 5000 min︱rapid traverse longitudinal 8 m/min︱rapid traverse cross 6 m/min︱main drive 11 kW︱total power requirement 24 KVA︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 3 x 1,9 x 1,9 m︱
          Control Heidenhain Manual Plus, for cone turning, contour turning and threat cutting. Running time: 18394 h
            turning diameter 0500 mm
            turning length 1000 mm
            control Heidenhain MP
            turning dia. over face-slide 290 mm
            spindle bore 70 mm
            spindle turning speed range 8- 2800 U/min
            feeds - longitudinal 0- 5000 mm/min
            feeds - cross 0- 5000 min
            rapid traverse longitudinal 8 m/min
            rapid traverse cross 6 m/min
            main drive 11 kW
            total power requirement 24 KVA
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 3 x 1,9 x 1,9 m
            Description :
            Control Heidenhain Manual Plus, for cone turning, contour turning and threat
            cutting. Running time: 18394 h
          Datasheet
          Request / Contact

          Roll Lathe

          used  Roll Lathe WMW DXW 560


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-20202 · Roll Lathe

          WMW - DXW 560 - - 1963 -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 560 mm︱turning length 4100 mm︱centre distance 4500 mm︱workpiece weight 8 t︱spindle turning speed range 4,5- 56 U/min︱feed - longitudinal/cross 0,31-6,54/0,074-2,65 mm/min︱rapid traverse 1250 mm/min︱min./max workpiece dia. 140- 440 mm︱dimensions of the machine ca. 9 x 1,9 x 1,5 m︱connected load 27 kW︱weight of the machine ca. 17,3 t︱
          Machine was reconditioned and modernized in 2009 !
            turning diameter over bed 630 mm
            turning diameter over slide rest 560 mm
            turning length 4100 mm
            centre distance 4500 mm
            workpiece weight 8 t
            spindle turning speed range 4,5- 56 U/min
            feed - longitudinal/cross 0,31-6,54/0,074-2,65 mm/min
            rapid traverse 1250 mm/min
            min./max workpiece dia. 140- 440 mm
            dimensions of the machine ca. 9 x 1,9 x 1,5 m
            connected load 27 kW
            weight of the machine ca. 17,3 t
            Description :
            Machine was reconditioned and modernized in 2009 !
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine HESSAPP DVT 250L


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40104 · Vertical Turning Machine

          HESSAPP - DVT 250L - - 2002 -

          Technical details
          turning diameter 200 mm︱swing diameter 250 mm︱turning height 240 mm︱CNC control SINUMERIK 840D ︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 30 m/min︱turning speed range - spindle 6.000 U/min︱Drive power (40 / 100 % DC) 48 / 31 kW︱diameter of main spindle in front bearing 100 mm︱spindle nose size according to DIN 55027 A6 ︱number of tool positions 2 x 12 ︱tool holder according to VDI 3425, shaft dia. 40 mm︱max. tool length 175 mm︱total power requirement 70 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 4,5 x3 x 3,3 m︱
          Machine works with two chucks and two turret heads. One chuck is hanging and the other one is standing. On the left side of the machine is a transport band to move the rough parts into the machine and on the rioght side is a transport band to move the ready parts out of the machine. Machine comes along with chip conveyor and cooling arrangement with filter. It will further come along with the two automatic chucks and one set of tool holders for each turret. Machine is immediately ready for work. Control: Siemens 840 D
            turning diameter 200 mm
            swing diameter 250 mm
            turning height 240 mm
            CNC control SINUMERIK 840D
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 30 m/min
            turning speed range - spindle 6.000 U/min
            Drive power (40 / 100 % DC) 48 / 31 kW
            diameter of main spindle in fron. 100 mm
            spindle nose size according to D. A6
            number of tool positions 2 x 12
            tool holder according to VDI 342. 40 mm
            max. tool length 175 mm
            total power requirement 70 kW
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 4,5 x3 x 3,3 m
            Description :
            Machine works with two chucks and two turret heads. One chuck is hanging and
            the other one is standing. On the left side of the machine is a transport band
            to move the rough parts into the machine and on the rioght side is a transport
            band to move the ready parts out of the machine. Machine comes along with chip
            conveyor and cooling arrangement with filter. It will further come along with
            the two automatic chucks and one set of tool holders for each turret. Machine
            is immediately ready for work.
            Control: Siemens 840 D
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column GMW VTM 5000 CNC(C)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40100 · Vertical Turret Lathe - Double Column

          GMW - VTM 5000 CNC(C) - - 2022 - Fanuc/Siemens

          Technical details
          faceplate diameter 4000 mm︱swing diameter 5000 mm︱turning height 2500 mm︱control Fanuc/Siemens ︱stroke of vertical slide 1600 mm︱tool holder 1 ︱distance face plate/tool carrier 0- 2500 mm︱vertical adjustment of the crossrail 1500 mm︱workpiece weight 40 t︱faceplate turning speed range -stepless- 1- 80 U/min︱feeds 0- 8000 mm/min︱rapid traverse 8 m/min︱horizontal adjustment of slide -2500 / +2850 mm︱adjustment speed of cross-rail 300 mm/min︱milling spindle - taper HSK-A63 ︱milling head speed 10- 2000 U/min︱max. torque on the faceplate 100 KNm︱total power requirement 155 kW︱weight of the machine ca. 90 t︱dimensions of the machine ca. 9,5 x 6,1 x 7,9 m︱
          This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH. Control: Fanuc or Siemens. Machine has safety guard and 12/18 (C) position ATC. WE HAVE ALSO OTHER SIZES UP TP 12 m AVAILABLE !
            faceplate diameter 4000 mm
            swing diameter 5000 mm
            turning height 2500 mm
            control Fanuc/Siemens
            stroke of vertical slide 1600 mm
            tool holder 1
            distance face plate/tool carrier 0- 2500 mm
            vertical adjustment of the cross. 1500 mm
            workpiece weight 40 t
            faceplate turning speed range -s. 1- 80 U/min
            feeds 0- 8000 mm/min
            rapid traverse 8 m/min
            horizontal adjustment of slide -2500 / +2850 mm
            adjustment speed of cross-rail 300 mm/min
            milling spindle - taper HSK-A63
            milling head speed 10- 2000 U/min
            max. torque on the faceplate 100 KNm
            total power requirement 155 kW
            weight of the machine ca. 90 t
            dimensions of the machine ca. 9,5 x 6,1 x 7,9 m
            Description :
            This machine is a new machine with (C) or without milling spindle. It will be
            sold with full service and warranty by Wirths GmbH.
            Control: Fanuc or Siemens. Machine has safety guard and 12/18 (C) position ATC.
            WE HAVE ALSO OTHER SIZES UP TP 12 m AVAILABLE !
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column GMW VTM 3500 CNC(C)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40101 · Vertical Turret Lathe - Double Column

          GMW - VTM 3500 CNC(C) - - 2022 - Fanuc/Siemens

          Technical details
          faceplate diameter 3150 mm︱swing diameter 3500 mm︱turning height 2500 mm︱control Fanuc/Siemens ︱stroke of vertical slide 1600 mm︱tool holder 1 ︱distance face plate/tool carrier 0- 2500 mm︱vertical adjustment of the crossrail 1500 mm︱workpiece weight 20 t︱faceplate turning speed range -stepless- 1- 100 U/min︱feeds 0- 8000 mm/min︱rapid traverse 16 m/min︱horizontal adjustment of slide -1500 / +1850 mm︱adjustment speed of cross-rail 320 mm/min︱milling spindle - taper HSK-A63 ︱milling head speed 10- 2000 U/min︱max. torque on the faceplate 63000 Nm︱total power requirement 145 kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 7 x 5,1 x 7,9 m︱
          This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH. Control: Fanuc or Siemens. Machine has safety guard and 12/18 (C) position ATC. WE HAVE ALSO OTHER SIZES UP TP 12 m AVAILABLE !
            faceplate diameter 3150 mm
            swing diameter 3500 mm
            turning height 2500 mm
            control Fanuc/Siemens
            stroke of vertical slide 1600 mm
            tool holder 1
            distance face plate/tool carrier 0- 2500 mm
            vertical adjustment of the cross. 1500 mm
            workpiece weight 20 t
            faceplate turning speed range -s. 1- 100 U/min
            feeds 0- 8000 mm/min
            rapid traverse 16 m/min
            horizontal adjustment of slide -1500 / +1850 mm
            adjustment speed of cross-rail 320 mm/min
            milling spindle - taper HSK-A63
            milling head speed 10- 2000 U/min
            max. torque on the faceplate 63000 Nm
            total power requirement 145 kW
            weight of the machine ca. 70 t
            dimensions of the machine ca. 7 x 5,1 x 7,9 m
            Description :
            This machine is a new machine with (C) or without milling spindle. It will be
            sold with full service and warranty by Wirths GmbH.
            Control: Fanuc or Siemens. Machine has safety guard and 12/18 (C) position ATC.
            WE HAVE ALSO OTHER SIZES UP TP 12 m AVAILABLE !
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column GMW VTM 1200 CNC(C)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40096 · Vertical Turret Lathe - Single Column

          GMW - VTM 1200 CNC(C) - - 2022 - Fanuc 0i-D

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1600 mm︱turning height 1250 mm︱control Fanuc 0i-D ︱stroke of vertical slide 900 mm︱tool holder 1 ︱distance face plate/tool carrier 700- 1500 mm︱vertical adjustment of the crossrail 800 mm︱workpiece weight 6 t︱faceplate turning speed range -stepless- 1 - 300 U/min︱feeds 0-10000/12000 mm/min︱rapid traverse 10/12 m/min︱horizontal adjustment of slide -200 - +950 mm︱adjustment speed of cross-rail 300 mm/min︱milling spindle - taper SK 50 ︱milling head speed 24 - 2400 U/min︱max. torque on the faceplate 10655 Nm︱total power requirement 50 KVA︱weight of the machine ca. 20,5 t︱
          This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH. Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.
            faceplate diameter 1250 mm
            swing diameter 1600 mm
            turning height 1250 mm
            control Fanuc 0i-D
            stroke of vertical slide 900 mm
            tool holder 1
            distance face plate/tool carrier 700- 1500 mm
            vertical adjustment of the cross. 800 mm
            workpiece weight 6 t
            faceplate turning speed range -s. 1 - 300 U/min
            feeds 0-10000/12000 mm/min
            rapid traverse 10/12 m/min
            horizontal adjustment of slide -200 - +950 mm
            adjustment speed of cross-rail 300 mm/min
            milling spindle - taper SK 50
            milling head speed 24 - 2400 U/min
            max. torque on the faceplate 10655 Nm
            total power requirement 50 KVA
            weight of the machine ca. 20,5 t
            Description :
            This machine is a new machine with (C) or without milling spindle. It will be
            sold with full service and warranty by Wirths GmbH.
            Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column GMW VTM 1600 CNC(C)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40097 · Vertical Turret Lathe - Single Column

          GMW - VTM 1600 CNC(C) - - 2022 - Fanuc 0i-D

          Technical details
          faceplate diameter 1600 mm︱swing diameter 2000 mm︱turning height 1600 mm︱control Fanuc 0i-D ︱stroke of vertical slide 1000 mm︱tool holder 1 ︱distance face plate/tool carrier 1065- 1865 mm︱vertical adjustment of the crossrail 800 mm︱workpiece weight 10 t︱faceplate turning speed range -stepless- 1 - 250 U/min︱feeds 0-10000/12000 mm/min︱rapid traverse 10/12 m/min︱horizontal adjustment of slide -200 - +1125 mm︱adjustment speed of cross-rail 300 mm/min︱milling spindle - taper SK 50 KVA︱milling head speed 50- 2250 U/min︱max. torque on the faceplate 18790 Nm︱total power requirement 60 kW︱weight of the machine ca. 28,5 t︱
          This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH. Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.
            faceplate diameter 1600 mm
            swing diameter 2000 mm
            turning height 1600 mm
            control Fanuc 0i-D
            stroke of vertical slide 1000 mm
            tool holder 1
            distance face plate/tool carrier 1065- 1865 mm
            vertical adjustment of the cross. 800 mm
            workpiece weight 10 t
            faceplate turning speed range -s. 1 - 250 U/min
            feeds 0-10000/12000 mm/min
            rapid traverse 10/12 m/min
            horizontal adjustment of slide -200 - +1125 mm
            adjustment speed of cross-rail 300 mm/min
            milling spindle - taper SK 50 KVA
            milling head speed 50- 2250 U/min
            max. torque on the faceplate 18790 Nm
            total power requirement 60 kW
            weight of the machine ca. 28,5 t
            Description :
            This machine is a new machine with (C) or without milling spindle. It will be
            sold with full service and warranty by Wirths GmbH.
            Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column GMW VTM 2000 CNC(C)


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40098 · Vertical Turret Lathe - Single Column

          GMW - VTM 2000 CNC(C) - - 2022 - Fanuc 0i-D

          Technical details
          faceplate diameter 2000 mm︱swing diameter 2500 mm︱turning height 1600 mm︱control Fanuc 0i-D ︱stroke of vertical slide 1000 mm︱tool holder 1 ︱distance face plate/tool carrier 1075 - 1875 mm︱vertical adjustment of the crossrail 800 mm︱workpiece weight 13 t︱faceplate turning speed range -stepless- 1 - 200 U/min︱feeds 0-10000/12000 mm/min︱rapid traverse 10/12 m/min︱horizontal adjustment of slide -250 - +1380 mm︱adjustment speed of cross-rail 300 mm/min︱milling spindle - taper SK 50 ︱milling head speed 50- 2250 U/min︱max. torque on the faceplate 23270 Nm︱total power requirement 60 KVA︱weight of the machine ca. 42 t︱
          This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH. Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.
            faceplate diameter 2000 mm
            swing diameter 2500 mm
            turning height 1600 mm
            control Fanuc 0i-D
            stroke of vertical slide 1000 mm
            tool holder 1
            distance face plate/tool carrier 1075 - 1875 mm
            vertical adjustment of the cross. 800 mm
            workpiece weight 13 t
            faceplate turning speed range -s. 1 - 200 U/min
            feeds 0-10000/12000 mm/min
            rapid traverse 10/12 m/min
            horizontal adjustment of slide -250 - +1380 mm
            adjustment speed of cross-rail 300 mm/min
            milling spindle - taper SK 50
            milling head speed 50- 2250 U/min
            max. torque on the faceplate 23270 Nm
            total power requirement 60 KVA
            weight of the machine ca. 42 t
            Description :
            This machine is a new machine with (C) or without milling spindle. It will be
            sold with full service and warranty by Wirths GmbH.
            Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DOERRIES VCE 1400-125


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40105 · Vertical Turret Lathe - Single Column

          DOERRIES - VCE 1400-125 - - 1991 - S 850 T

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1400 mm︱turning height 1200 mm︱Control S 850 T ︱faceplate turning speed range 3,55- 400 U/min︱workpiece weight max. 6000 kg︱tool change unit 20 Pos.︱main drive motor 69 kW︱vertical adjustment of drilling slide 1000 mm︱vertical adjustment of the crossrail 600 mm︱adjustment speed of cross-rail 425 mm/min︱feeds longditudinal/cross/vertical 3- 8000 mm/min︱rapid traverse 8 m/min︱total power requirement 100 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 5 x 4 x 3,5 m︱
          Control: Siemens 850 T. Machine does have 20 position ATC, chip conveyor and cooling arrangement with filter.
            faceplate diameter 1250 mm
            swing diameter 1400 mm
            turning height 1200 mm
            Control S 850 T
            faceplate turning speed range 3,55- 400 U/min
            workpiece weight max. 6000 kg
            tool change unit 20 Pos.
            main drive motor 69 kW
            vertical adjustment of drilling . 1000 mm
            vertical adjustment of the cross. 600 mm
            adjustment speed of cross-rail 425 mm/min
            feeds longditudinal/cross/vertic. 3- 8000 mm/min
            rapid traverse 8 m/min
            total power requirement 100 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 5 x 4 x 3,5 m
            Description :
            Control: Siemens 850 T. Machine does have 20 position ATC, chip conveyor and
            cooling arrangement with filter.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Profilo del commerciante: Karl Günter Wirths GmbH

          Contatta Trader



            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 - Ennepetalo
            Germania
            02333-79050 "> 02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Profilo di Trader

          Chi siamo - Wirths GmbH in Ennepetal

          wirths gmbh.Karl G. Wirths ha fondato l'azienda in 1956 come officina meccanica. 1961 ha sviluppato uno stampista per stampi e stampi. A quel tempo i dipendenti di 30 lavoravano come produttori di stampi nell'officina.
           
          Parallelamente Karl G. Wirths ha aperto un negozio per la ristrutturazione di macchine utensili. Questo è stato anche l'inizio per il business delle macchine utensili.

          Il negozio è stato chiuso 1972, ma il business delle macchine utensili è stato sviluppato.

          Nel 1972 fu eretto il primo stock. Finora edifici con capacità gru fino a 50 t.

          In quel magazzino teniamo sempre ca. Macchine 250.

          Non siamo concentrati su un business una tantum ma su un rapporto di business a lungo termine con i nostri clienti domestici e clienti da tutti i luoghi del mondo.

          Contatto

          Wirths GmbHKarl Günter Wirths GmbH
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Germania




          Karl Günter Wirths GmbH   58256 - Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 - Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:

           
          ACHTUNG: NEUE FAX Nr. 02333 790555




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandsäge - horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrmaschine · Bohrwerkstisch · CNC Drehmaschine · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Fräskopf · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Fräswerkzeuge · Handhebel-Schere · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kreissäge - Automatisch · Lehrenbohrwerk - Vertikal · Messmaschine · Plattenbohrwerk - Horizontal · Profilprojektor · Profilstahlschere - Kombiniert · Radialbohrmaschine · Richtmaschine · Richtplatte · Richtpresse - Einständer · Rollengang · Rundtisch - Universal · Sandstrahlanlage · Schnellradialbohrmaschine · Schwerdrehmaschine · Spitzendrehmaschine · Tafelschere - hydraulisch · Teilapparat · Tieflochbohrmaschine · Tischbohrwerk · Vertikaldrehmaschine · Walzendrehmaschine · Zahnrad-Abwälzfräsmaschine - vertikal ·