Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Knops Werkzeugmaschinen GmbH & Co. KG - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WOHLENBERG V 1000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08501 · Center Lathe

          WOHLENBERG - V 1000 - - 1991 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 3000 mm︱spindle turning speed range 4,5 - 900 U/min︱spindle bore 104 mm︱total power requirement 30 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. m︱
          - 3-axis D.R.O. - Feed in the upper slide - Multifix quick change tool holder size D with 2 holders - coolant device - steady-rest The lathe chuck (face plate) shown has been replaced by an older one.
            turning diameter over bed 1000 mm
            turning diameter over slide rest 760 mm
            turning length 3000 mm
            spindle turning speed range 4,5 - 900 U/min
            spindle bore 104 mm
            total power requirement 30 kW
            weight of the machine ca. 10,5 t
            Description :
            - 3-axis D.R.O.
            - Feed in the upper slide
            - Multifix quick change tool holder size D with 2 holders
            - coolant device
            - steady-rest

            The lathe chuck (face plate) shown has been replaced by an older one.
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe TRAUB TND 400


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06032 · CNC Lathe

          TRAUB - TND 400 - - 1991 - TX-8F

          Technical details
          turning diameter 240 mm︱turning length 800 mm︱control TX-8F ︱spindle passage 65 mm︱tool taper VDI 50 ︱main drive 30 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The machine has only run sporadically in recent years, basically max. 1-shift operation. CNC control TX-8F Tapping device 12 turret slots Driven tools Dismantling and loading cost not included!
            turning diameter 240 mm
            turning length 800 mm
            control TX-8F
            spindle passage 65 mm
            tool taper VDI 50
            main drive 30 kW
            Description :
            The machine has only run sporadically in recent years, basically max. 1-shift
            operation.

            CNC control TX-8F
            Tapping device
            12 turret slots
            Driven tools

            Dismantling and loading cost not included!


          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center NILES-SIMMONS N 50 MC / 6000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08714 · CNC Turning- and Milling Center

          NILES-SIMMONS - N 50 MC / 6000 - - 2009 - Siemens 840D Power Line

          Technical details
          turning diameter 1300 mm︱turning length 6000 mm︱control Siemens 840D Power Line ︱total power requirement kW︱weight of the machine ca. 82 t︱dimensions of the machine ca. 17,6 x 3,7 x 3,9 m︱
          5-axis CNC inclined bed turning and milling center The machine is PRACTICAL NEW! - Test run only! Main spindle hours: 1047 Main spindle C axis: 228 Advance items active: 968 Milling spindle active: 460 (New price in 2009 - Euro 1,700,000.00) Siemens 840D CNC Control. Swing diameter over the bed 1300 mm. Swing diameter over the saddle 1250 mm. Turning length 6000 mm. Spindle bore 225 mm. Chuck diameter 630 mm. Spindle drive motor rating 78/87 KW. Spindle speeds 10 - 1244 rpm in 2 gear steps. C-Axis 0.001 deg. Single tool carrier for Turning/Milling. 96 station tool magazine/tool changer. Tool taper HSK-A100. Milling spindle drive motor rating 38/48.3 KW. Milling spindle speeds to 3500 rpm. Y-Axis (off centre milling/drilling) -400/+395 mm. B-Axis tool swivelling axis range -105/+95 deg.. 3 x NC-steady slides with steady rests. NC-Tailstock. Tool monitoring. Coolant pump 80 bar. Process near measuring of the workpiece in the working area. Huge amount ( EUR 176,695.) of toolings unused, included
            turning diameter 1300 mm
            turning length 6000 mm
            control Siemens 840D Power Line
            weight of the machine ca. 82 t
            dimensions of the machine ca. 17,6 x 3,7 x 3,9 m
            Description :
            5-axis CNC inclined bed turning and milling center
            The machine is PRACTICAL NEW! - Test run only!

            Main spindle hours: 1047
            Main spindle C axis: 228
            Advance items active: 968
            Milling spindle active: 460

            (New price in 2009 - Euro 1,700,000.00)




            Siemens 840D CNC Control.
            Swing diameter over the bed 1300 mm.
            Swing diameter over the saddle 1250 mm.
            Turning length 6000 mm.
            Spindle bore 225 mm.
            Chuck diameter 630 mm.
            Spindle drive motor rating 78/87 KW.
            Spindle speeds 10 - 1244 rpm in 2 gear steps.
            C-Axis 0.001 deg.
            Single tool carrier for Turning/Milling.
            96 station tool magazine/tool changer.
            Tool taper HSK-A100.
            Milling spindle drive motor rating 38/48.3 KW.
            Milling spindle speeds to 3500 rpm.
            Y-Axis (off centre milling/drilling) -400/+395 mm.
            B-Axis tool swivelling axis range -105/+95 deg..
            3 x NC-steady slides with steady rests.
            NC-Tailstock.
            Tool monitoring.
            Coolant pump 80 bar.
            Process near measuring of the workpiece in the working area.
            Huge amount ( EUR 176,695.) of toolings unused, included
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G 250 RATIO LINE 1400 mm


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08791 · CNC Turning- and Milling Center

          INDEX - G 250 RATIO LINE 1400 mm - - 2005 - Siemens C 200-4 D 840 D

          Technical details
          turning diameter 250 mm︱turning length 1400 mm︱control Siemens C 200-4 D 840 D︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 4.520 x 2.440 x 2.400 m︱
            turning diameter 250 mm
            turning length 1400 mm
            control Siemens C 200-4 D 840 D
            dimensions of the machine ca. 4.520 x 2.440 x 2.400 m
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center TRAUB TNK 36


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05810 · CNC Turning- and Milling Center

          TRAUB - TNK 36 - - 2002 - TRAUB TX8i

          Technical details
          turning diameter 36 mm︱turning length 100 mm︱control TRAUB TX8i ︱bar capacity 36 mm︱spindle turning speed range max. 6300 U/min︱main drive motor 10,7 kW︱Subspindle motor 10,7 kW︱total power requirement 33 kW︱weight of the machine ca. t︱
          * Main- and subspindle with C-axis 0,001 deg. * Bar loader FMB turbo 5-42 XT * Tool carrier I (X/Y/Z): - 12-station turret, life tools 6000 rpm, 5,5 kW - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm * Tool carrier II (X/Z): - 5-station front working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 370 mm, Z-axis 250 mm * Tool carrier III (X/Y): - 5-station back working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 73 mm, Y-axis +/-50 mm Information about the chucks: Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW Collets: SK6970ZW or SK6970ZW
            turning diameter 36 mm
            turning length 100 mm
            control TRAUB TX8i
            bar capacity 36 mm
            spindle turning speed range max. 6300 U/min
            main drive motor 10,7 kW
            Subspindle motor 10,7 kW
            total power requirement 33 kW
            Description :
            * Main- and subspindle with C-axis 0,001 deg.
            * Bar loader FMB turbo 5-42 XT
            * Tool carrier I (X/Y/Z):
            - 12-station turret, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm
            * Tool carrier II (X/Z):
            - 5-station front working attachment, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 370 mm, Z-axis 250 mm
            * Tool carrier III (X/Y):
            - 5-station back working attachment, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 73 mm, Y-axis +/-50 mm

            Information about the chucks:
            Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW
            Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW
            Collets: SK6970ZW or SK6970ZW

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK Integrex 200 SY + GL100C


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08710 · CNC Turning- and Milling Center

          MAZAK - Integrex 200 SY + GL100C - - 2001 - MAZATROL 640 MT

          Technical details
          turning diameter 540 mm︱turning length ca. 1065 mm︱control MAZATROL 640 MT ︱total power requirement kW︱weight of the machine ca. 8,4 t︱dimensions of the machine ca. m︱
          MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle, max. speed 5.000 rpm Main spindle full C-axis Sub spindle, max. speed 6.000 rpm Y-axis +/- 80 mm Milling spindle, max. speed 6.000 rpm Full B-axis, 225° ATC 40 tools KM-63 toolholders Tooleye 1 x 3-Backenfutter, Diameter 210 mm 1 x 3-Backenfutter, Diameter 170 mm Portallader Flex GL-100C High pressure coolant, 20 bar Swarf conveyor
            turning diameter 540 mm
            turning length ca. 1065 mm
            control MAZATROL 640 MT
            weight of the machine ca. 8,4 t
            Description :
            MAZATROL 640 MT control
            max. turning diameter 540 mm
            Z-axis movements 1.065 mm
            Main spindle, max. speed 5.000 rpm
            Main spindle full C-axis
            Sub spindle, max. speed 6.000 rpm
            Y-axis +/- 80 mm
            Milling spindle, max. speed 6.000 rpm
            Full B-axis, 225°
            ATC 40 tools
            KM-63 toolholders
            Tooleye
            1 x 3-Backenfutter, Diameter 210 mm
            1 x 3-Backenfutter, Diameter 170 mm
            Portallader Flex GL-100C
            High pressure coolant, 20 bar
            Swarf conveyor
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 400


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2232 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 400 - - 1990 - Eltro Pilot 2

          Technical details
          turning diameter 500 mm︱turning length 600 mm︱control Eltro Pilot 2 ︱total power requirement 45 kVA︱weight of the machine ca. t︱dimensions of the machine ca. 4,5 x 2,0 x 1,8 m︱
          Machine in good condition. Machine under power 40514 hours. Equipmet: CNC control Eltro Pilot 2 Driven tools C-axis, indexable main spindle Power chuck with jaws. A range of standard and driven tool holders. Chip conveyor with coolant device Swing over bed: 500 mm Turning length: 600 mm Spindle speed: 20 - 5000 rpm. Number of tools: 12 Spindle Bore: 72mm Tailstock quill diameter: 80 mm Tailstock quill stroke: 100mm Space requirement approx.: 4.5 x 2.0 x 1.8 m
            turning diameter 500 mm
            turning length 600 mm
            control Eltro Pilot 2
            total power requirement 45 kVA
            dimensions of the machine ca. 4,5 x 2,0 x 1,8 m
            Description :
            Machine in good condition.
            Machine under power 40514 hours.

            Equipmet:
            CNC control Eltro Pilot 2
            Driven tools
            C-axis, indexable main spindle
            Power chuck with jaws.
            A range of standard and driven tool holders.
            Chip conveyor with coolant device

            Swing over bed: 500 mm
            Turning length: 600 mm
            Spindle speed: 20 - 5000 rpm.
            Number of tools: 12
            Spindle Bore: 72mm
            Tailstock quill diameter: 80 mm
            Tailstock quill stroke: 100mm
            Space requirement approx.: 4.5 x 2.0 x 1.8 m
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used  Facing and Centering Lathe WMW ZERBST DP 4000 ... DP 5000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05430 · Facing and Centering Lathe

          WMW ZERBST - DP 4000 ... DP 5000 - - retrofit 2014 -

          Technical details
          turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 22000 mm︱total power requirement 36 kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. m︱
          Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg.
            turning diameter over bed 5000 mm
            turning diameter over slide rest 4000 mm
            turning length 22000 mm
            total power requirement 36 kW
            weight of the machine ca. 53,5 t
            Description :
            Facing and Centering Lathe with plate field

            - Max. Turning diameter over the bed slide 4000 mm
            - Max. Turning diameter 5000 mm
            - Max. Turning length: 22000 mm
            - Face plate speed range 0.9 - 56 rpm
            - Faceplate diameter 4420 mm
            - Max. Workpiece weight between the centers: 20 t
            - Max. workpiece weight -without tailstock: 12,5 t

            - Two bed slides with 4500 mm turning length
            - With plate fields
            - A roller block
            - With tailstock

            Machine was overhauled in Italy in 2014 with stepless speed control.
            After the overhaul, the lathe was no longer operational.

            Machine is dismantled and stored near Hamburg.
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe CRAVEN 80,5


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H05287 · Heavy Duty Lathe

          CRAVEN - 80,5 - - ca.1960 -

          Technical details
          turning diameter over bed 4100 mm︱turning diameter over slide rest 3505 mm︱turning length 12000 mm︱centre height 2045 mm︱centre distance 12192 mm︱bed width 4270 mm︱max. workpiece weight between centres 70000 kg︱main drive 81 kW︱faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min︱total power requirement kW︱weight of the machine ca. 205 t︱dimensions of the machine ca. m︱
          4 SLIDES BED LATHE CENTRES HEIGHT 2.045 MM. CENTRES DISTANCE 12.192 MM. MAX. DIAMETER OVER BED 4.100 MM. PACKING LIST FOR CRAVEN 80,5 LATHE n. 4 X 40’ OT for pieces in normal sizes n. 5 SPECIAL PCS: HEAD mm. 4.560 x 4.170 x 3.000 kg. 32.000 FACEPLATE mm. 3.650 x 3.650 x 250 kg. 15.000 BED UNDER THE HEAD mm. 4.900 x 4.280 x 750 kg. 22.000 BED mm. 6.870 x 4.280 x 750 kg. 30.400 BED mm. 6.870 x 4.280 x 750 kg. 30.400 MAX. DIAMETER OVER SADDLE 3.505 MM. BED WIDTH 4.270 MM. MAX. WEIGHT BETWEEN CENTRES 70 TONS. MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS. SPINDLE MOTOR POWER 81 KW. SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM. SPINDLE HOLE 180 MM. TOTAL WEIGHT 205 COMPLETE WITH: - 4 JAWS FACEPLATE 3.660 MM. - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM. - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS - UPPER SADDLE FOR THREADING - CRANK SHAFTS TURNING DEVICE
            turning diameter over bed 4100 mm
            turning diameter over slide rest 3505 mm
            turning length 12000 mm
            centre height 2045 mm
            centre distance 12192 mm
            bed width 4270 mm
            max. workpiece weight between ce. 70000 kg
            main drive 81 kW
            faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min
            weight of the machine ca. 205 t
            Description :
            4 SLIDES BED LATHE

            CENTRES HEIGHT 2.045 MM.

            CENTRES DISTANCE 12.192 MM.

            MAX. DIAMETER OVER BED 4.100 MM.


            PACKING LIST FOR CRAVEN 80,5 LATHE

            n. 4 X 40’ OT for pieces in normal sizes

            n. 5 SPECIAL PCS:

            HEAD mm. 4.560 x 4.170 x 3.000 kg. 32.000
            FACEPLATE mm. 3.650 x 3.650 x 250 kg. 15.000
            BED UNDER THE HEAD mm. 4.900 x 4.280 x 750 kg. 22.000
            BED mm. 6.870 x 4.280 x 750 kg. 30.400
            BED mm. 6.870 x 4.280 x 750 kg. 30.400







            MAX. DIAMETER OVER SADDLE 3.505 MM.

            BED WIDTH 4.270 MM.

            MAX. WEIGHT BETWEEN CENTRES 70 TONS.

            MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS.

            SPINDLE MOTOR POWER 81 KW.

            SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM.

            SPINDLE HOLE 180 MM.

            TOTAL WEIGHT 205


            COMPLETE WITH:
            - 4 JAWS FACEPLATE 3.660 MM.
            - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM.
            - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS
            - UPPER SADDLE FOR THREADING
            - CRANK SHAFTS TURNING DEVICE
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe QIQIHAR HT125x110/12


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08290 · Heavy Duty Lathe

          QIQIHAR - HT125x110/12 - - 2009 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱
          Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual
            turning diameter over bed 1250 mm
            turning diameter over slide rest 1000 mm
            turning length 11000 mm
            weight of the machine ca. 49 t
            Description :
            Center height 720 mm
            Center distance 11000 mm
            Turning diameter over bed 1250 mm
            Turning diameter over slide 1000 mm
            Workpiece weight max 12 to
            Speed 3-315 rpm - stepless
            Motor power 55 kW (DC)

            Equipment
            1 position indicator HEIDENHAIN | Type ND 780 for 1 axis
            1 four-jaw faceplate Ø 1000 mm
            1 fixed steady rest
            1 ring steady rest with four-jaw faceplate Ø 920 mm
            1 Autom. 4-pos. tool holder
            1 Chip conveyor
            1 Machine lamp
            1 Coolant device
            Operating key | operating manual
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SEIGER SLZ 570 x 2000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2234 · Lathe - cycle-controlled

          SEIGER - SLZ 570 x 2000 - - 1998 - Heidenhain ManualPlus

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱control Heidenhain ManualPlus︱turning diameter over bed slide 340 ︱centre height 265 mm︱spindle bore 63 mm︱spindle turning speed range 1 - 2500 U/min︱rapid travel - longitudinal/face 10 / 7 m/min︱main drive motor 16 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 3,8 x 2 x 2 m︱
          * CNC-control HEIDENHAIN ManualPlus * Swarf conveyor * 2 off steady-rests
            turning diameter 570 mm
            turning length 2000 mm
            control Heidenhain ManualPlus
            turning diameter over bed slide 340
            centre height 265 mm
            spindle bore 63 mm
            spindle turning speed range 1 - 2500 U/min
            rapid travel - longitudinal/face 10 / 7 m/min
            main drive motor 16 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 3,8 x 2 x 2 m
            Description :
            * CNC-control HEIDENHAIN ManualPlus
            * Swarf conveyor
            * 2 off steady-rests
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column TOS-HULIN SKIQ 16


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06016 · Vertical Turret Lathe - Single Column

          TOS-HULIN - SKIQ 16 - - 1989/2006 retrofit - Siemens 840 D

          Technical details
          faceplate diameter 1600 mm︱swing diameter 2000 mm︱turning height 1500 mm︱Control Siemens 840 D ︱total power requirement 80 kVA︱weight of the machine ca. 25,5 t︱dimensions of the machine ca. m︱
          General overhauling and modernized with CNC in the year 2006 Equipmemt: CNC control SIEMENS 840 D 15-pos tool changer Hydraulic 4-jaw faceplate Coolant system Coolant is fed through the ram and the tool holders to the tool cutting edge promoted. Hydraulically operated safety gates Chip conveyor Technical specifications: Faceplate diameter 1600 mm Faceplate speed range 2.5 - 315 rpm. Main engine 60 kW Largest workpiece diameter 2000 mm Size workpiece height 1500 mm Largest slider stroke 1000 mm Crossbar adjustment 800 mm Feeds 1 - 4000 mm/min. Rapid traverse 12000 mm/min. Total power consumption of the machine 80 kVA Required area 6720 x 5800 mm Machine height 5895 mm Machine weight 25.5 t
            faceplate diameter 1600 mm
            swing diameter 2000 mm
            turning height 1500 mm
            Control Siemens 840 D
            total power requirement 80 kVA
            weight of the machine ca. 25,5 t
            Description :
            General overhauling and modernized with CNC in the year 2006

            Equipmemt:
            CNC control SIEMENS 840 D
            15-pos tool changer
            Hydraulic 4-jaw faceplate
            Coolant system
            Coolant is fed through the ram and the tool holders to the
            tool cutting edge promoted.
            Hydraulically operated safety gates
            Chip conveyor

            Technical specifications:
            Faceplate diameter 1600 mm
            Faceplate speed range 2.5 - 315 rpm.
            Main engine 60 kW
            Largest workpiece diameter 2000 mm
            Size workpiece height 1500 mm
            Largest slider stroke 1000 mm
            Crossbar adjustment 800 mm
            Feeds 1 - 4000 mm/min.
            Rapid traverse 12000 mm/min.
            Total power consumption of the machine 80 kVA
            Required area 6720 x 5800 mm
            Machine height 5895 mm
            Machine weight 25.5 t
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DÖRRIES CTE 160


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05626 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 160 - - 1977/2007 - Heidenhain

          Technical details
          faceplate diameter 1600 mm︱swing diameter 1800 mm︱turning height 1500 mm︱Control Heidenhain ︱max. ram stroke 1200 mm︱faceplate turning speed range 0 - 200 U/min︱main drive motor 85 kW︱workpiece weight max. 8000 kg︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 8,4 x 4,5 x 5,3 m︱
          In 2007 geometrically overhauled and modernized (retrofit) * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles: - Right ram (axes X1 and Z1), faceplate (S) * D.R.O. make HEIDENHAIN ND 780 for following axes: - Left ram (axes X2 and Z2), crossrail * Two rams: - ram (right hand side) with 16-station ATC - ram (left hand side) with 4-station turret * Swarf conveyor
            faceplate diameter 1600 mm
            swing diameter 1800 mm
            turning height 1500 mm
            Control Heidenhain
            max. ram stroke 1200 mm
            faceplate turning speed range 0 - 200 U/min
            main drive motor 85 kW
            workpiece weight max. 8000 kg
            weight of the machine ca. 25 t
            dimensions of the machine ca. 8,4 x 4,5 x 5,3 m
            Description :
            In 2007 geometrically overhauled and modernized (retrofit)

            * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles:
            - Right ram (axes X1 and Z1), faceplate (S)
            * D.R.O. make HEIDENHAIN ND 780 for following axes:
            - Left ram (axes X2 and Z2), crossrail
            * Two rams:
            - ram (right hand side) with 16-station ATC
            - ram (left hand side) with 4-station turret
            * Swarf conveyor
          Datasheet
          Request / Contact

          Deephole Boring Machine

          used  Deephole Boring Machine IXION TL-1004


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2224 · Deephole Boring Machine

          IXION - TL-1004 - - 1997 - Mitsubishi M 530

          Technical details
          core drilling diameter max. - mm︱bore depth - mm︱swing diameter - mm︱Control Mitsubishi M 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Mitsubishi M 530 X axis 700mm Y axis 400 (800 option) mm Z axis 1000mm W axis 1100 mm Table surface 1375 x 700 mm Table load 2000 kg Tool holder SK 40 Spindle speed range 100 - 4000 rpm. Main spindle drive 3/5.5 kW Drilling capacity 25 mm Thread cutting M 20 Note: Machine without B-axis and tool changer.
            core drilling diameter max. - mm
            bore depth - mm
            swing diameter - mm
            Control Mitsubishi M 530
            Description :
            CNC control Mitsubishi M 530

            X axis 700mm
            Y axis 400 (800 option) mm
            Z axis 1000mm
            W axis 1100 mm

            Table surface 1375 x 700 mm
            Table load 2000 kg
            Tool holder SK 40
            Spindle speed range 100 - 4000 rpm.
            Main spindle drive 3/5.5 kW
            Drilling capacity 25 mm
            Thread cutting M 20

            Note:
            Machine without B-axis and tool changer.
          Datasheet
          Request / Contact

          Machining Center - Double Column-Vert

          used  Machining Center - Double Column-Vert KONDIA HM-2010


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08782 · Machining Center - Double Column-Vert

          KONDIA - HM-2010 - - 2011 - Heidenhain iTNC 530

          Technical details
          x-travel 2000 mm︱y-travel 1000 mm︱z-travel 510 mm︱Control Heidenhain iTNC 530 ︱total power requirement 54 kW︱weight of the machine ca. 14 t︱dimensions of the machine ca. m︱
          3-axis vertical machining center / double column Equipment: direct measuring system, electron. handwheel HR 410 internal coolant supply 40bar chip conveyor mode 4 software option2 BLUM laser prepared for 4. axis internalair-blast supply glass windows Operation hours: approx. 28.000 h "machine on" approx. 15.000 h "spindle on" Price of new machine around EUR 290.000,- x-travel 2.000 mm y-travel 1.000 mm z-travel 510 mm Table dimensions 2.060 x 1.000 mm turning speeds 17.000 1/min control HEIDENHAIN iTNC 530 tool taper SK 40 big plus tool change unit 40 Pos. drive capacity - spindle motor 31,5 kW total power requirement 54 kW dimensions of the machine ca. m weight of the machine ca. 14 t
            x-travel 2000 mm
            y-travel 1000 mm
            z-travel 510 mm
            Control Heidenhain iTNC 530
            total power requirement 54 kW
            weight of the machine ca. 14 t
            Description :
            3-axis vertical machining center / double column

            Equipment:
            direct measuring system,
            electron. handwheel HR 410
            internal coolant supply 40bar
            chip conveyor
            mode 4
            software option2
            BLUM laser
            prepared for 4. axis
            internalair-blast supply
            glass windows

            Operation hours:
            approx. 28.000 h "machine on"
            approx. 15.000 h "spindle on"

            Price of new machine around EUR 290.000,-


            x-travel 2.000 mm
            y-travel 1.000 mm
            z-travel 510 mm
            Table dimensions 2.060 x 1.000 mm
            turning speeds 17.000 1/min
            control HEIDENHAIN iTNC 530
            tool taper SK 40 big plus
            tool change unit 40 Pos.
            drive capacity - spindle motor 31,5 kW
            total power requirement 54 kW
            dimensions of the machine ca. m
            weight of the machine ca. 14 t




          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal STARRAG-HECKERT HEC 400 D


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05829 · Machining Center - Horizontal

          STARRAG-HECKERT - HEC 400 D - - 2017 - Siemens 840 D sl

          Technical details
          x-travel 650 mm︱y-travel 650 mm︱z-travel 680 mm︱Control Siemens 840 D sl ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 650 mm
            y-travel 650 mm
            z-travel 680 mm
            Control Siemens 840 D sl
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal DECKEL- MAHO DMG DMC 65 H duo BLOCK


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06121 · Machining Center - Horizontal

          DECKEL- MAHO DMG - DMC 65 H duo BLOCK - - 2011 - Siemens 840 D

          Technical details
          x-travel 700 mm︱y-travel 700 mm︱z-travel 700 mm︱Control Siemens 840 D ︱total power requirement 75 kVA︱weight of the machine ca. 9,7 t︱dimensions of the machine ca. m︱
          Control: CNC 3D path control, incl. TFT color screen SIEMENS 840 D solution line On hours: 31091 h Spindle running time: 25667 h TECHNICAL SPECIFICATIONS Travel range x-axis: 700 mm y-axis: 700 mm z-axis: 700 mm rotary pallet changer Number of pallets: 2 Pallet size 500 x 500 mm NC rotary table with pallet carrier Resolution: 0.001° Rotational speed 40 min-1 Drive power: 20 kW Tool holder: KSK-A63 Speed ??range up to18000 rpm automatic tool changer (vertical chain magazine) Number of tools: 60 Tool diameter: 90/160 mm Tool Length: 450mm Tool weight: 3.5 kg Chip-to-chip time: 3.7 s Operating voltage: 400V/50Hz Total connected load: 75 kVA Total installation area approx.: 25m2 Machine height: 3.4m Machine weight: 9,700 kg EQUIPMENT/ACCESSORIES - Integrated motor spindle including active cooling - Horizontal milling head - Tool changing device ATC 60 with - Double gripper - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 500 x 500 mm - 2 pallets 630 x 630 mm - Clamping hydraulics 2/4 for work table and Set-up station for connecting hydraulically operated clamping devices - RENISHAW – Infrared – probe PP60 optical (OMP60) - Tool breakage control - mech. execution - 4-color signal lamp - Direct linear measuring systems (all axes) - Dynamic Pack - DMG Netservice - Coolant system with high-pressure pump and filtering, Tank capacity 980 l - IKZ internal coolant supply through the spindle up to 80 bar/20 l 7 pressure levels, selectable via NC program - Roof flushing 300 l/min - Coolant temperature control for IKZ - Flushing gun with pump 1 bar/40 l/m,in - Rotating lens - chip conveyor - Spare parts package - Installation elements - Documentation
            x-travel 700 mm
            y-travel 700 mm
            z-travel 700 mm
            Control Siemens 840 D
            total power requirement 75 kVA
            weight of the machine ca. 9,7 t
            Description :
            Control: CNC 3D path control, incl. TFT color screen
            SIEMENS 840 D solution line
            On hours: 31091 h
            Spindle running time: 25667 h

            TECHNICAL SPECIFICATIONS
            Travel range
            x-axis: 700 mm
            y-axis: 700 mm
            z-axis: 700 mm
            rotary pallet changer
            Number of pallets: 2
            Pallet size 500 x 500 mm
            NC rotary table with pallet carrier
            Resolution: 0.001°
            Rotational speed 40 min-1
            Drive power: 20 kW
            Tool holder: KSK-A63
            Speed ??range up to18000 rpm
            automatic tool changer (vertical
            chain magazine)
            Number of tools: 60
            Tool diameter: 90/160 mm
            Tool Length: 450mm
            Tool weight: 3.5 kg
            Chip-to-chip time: 3.7 s
            Operating voltage: 400V/50Hz
            Total connected load: 75 kVA
            Total installation area approx.: 25m2
            Machine height: 3.4m
            Machine weight: 9,700 kg


            EQUIPMENT/ACCESSORIES
            - Integrated motor spindle including active cooling
            - Horizontal milling head
            - Tool changing device ATC 60 with
            - Double gripper
            - NC rotary table with pallet carrier
            - Rotary pallet changer
            - 2 pallets 500 x 500 mm
            - 2 pallets 630 x 630 mm
            - Clamping hydraulics 2/4 for work table and
            Set-up station for connecting hydraulically operated
            clamping devices
            - RENISHAW – Infrared – probe PP60
            optical (OMP60)
            - Tool breakage control - mech. execution
            - 4-color signal lamp
            - Direct linear measuring systems (all axes)
            - Dynamic Pack
            - DMG Netservice
            - Coolant system with high-pressure pump and filtering,
            Tank capacity 980 l
            - IKZ internal coolant supply through the spindle up to 80
            bar/20 l
            7 pressure levels, selectable via NC program
            - Roof flushing 300 l/min
            - Coolant temperature control for IKZ
            - Flushing gun with pump 1 bar/40 l/m,in
            - Rotating lens
            - chip conveyor
            - Spare parts package
            - Installation elements
            - Documentation

          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MCM ACTION 2600 FFS


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05884 · Machining Center - Horizontal

          MCM - ACTION 2600 FFS - - 2008 - Fanuc 16 MB

          Technical details
          x-travel 2600 mm︱y-travel 1600 mm︱z-travel 1700 mm︱Control Fanuc 16 MB ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 42 x 18 m︱
          The system requires a space of approx. 42 x 18 m It is designed for "fully automatic operation" in 3 shifts. Components with tolerances of <0.01 mm were produced on the system. Equipment: CNC control Fanuc 16 MB 20-pos pallet changer Pallet size 1250 x 1000 mm Interference circle diameter up to 2700 mm Vertical tool magazine with 599 places HSK-A100 from 3 modules on 4 levels Rotary table (B-axis) with 3,600,000 angular positions Table load 4000 kg Spindle speeds 8,000 rpm. Motor power 26/37 kW Torque 605/707 Nm Chip disposal through two jet pipes in the existing central Chip disposal system Connection to an in-house central coolant system. IKZ spindle with supply of coolant through the center of the tool Cooling unit for working spindle use Electrical control cabinet with air conditioning Protective cover for the work area Protective fence cladding, sheet metal below and safety glass above, for the entire working area of ??the machine. Buffer shelf with 5 tool spaces for quick tool provision Tool cone cleaning High pressure coolant supply 65 bar Laser control of tool availability Inductive button for temperature compensation on the electrospindle Tool Monitor Renishaw button type RMP 60 Rotoclear AR aspirator Machine preparation for hydraulic clamping (on the turntable) Automation of the plant
            x-travel 2600 mm
            y-travel 1600 mm
            z-travel 1700 mm
            Control Fanuc 16 MB
            dimensions of the machine ca. 42 x 18 m
            Description :
            The system requires a space of approx. 42 x 18 m
            It is designed for "fully automatic operation" in 3 shifts.
            Components with tolerances of <0.01 mm were produced on the system.

            Equipment:
            CNC control Fanuc 16 MB
            20-pos pallet changer
            Pallet size 1250 x 1000 mm
            Interference circle diameter up to 2700 mm
            Vertical tool magazine with 599 places HSK-A100
            from 3 modules on 4 levels
            Rotary table (B-axis) with 3,600,000 angular positions
            Table load 4000 kg
            Spindle speeds 8,000 rpm.
            Motor power 26/37 kW
            Torque 605/707 Nm
            Chip disposal through two jet pipes in the existing central
            Chip disposal system
            Connection to an in-house central coolant system.
            IKZ spindle with supply of coolant through the center of the tool
            Cooling unit for working spindle use
            Electrical control cabinet with air conditioning
            Protective cover for the work area
            Protective fence cladding, sheet metal below and safety glass above,
            for the entire working area of ??the machine.
            Buffer shelf with 5 tool spaces for quick tool provision
            Tool cone cleaning
            High pressure coolant supply 65 bar
            Laser control of tool availability
            Inductive button for temperature compensation on the electrospindle
            Tool Monitor
            Renishaw button type RMP 60
            Rotoclear
            AR aspirator
            Machine preparation for hydraulic clamping (on the turntable)
            Automation of the plant
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MAZAK FH 6800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06043 · Machining Center - Horizontal

          MAZAK - FH 6800 - - 1999-09 - Mazatrol 640M

          Technical details
          x-travel 1050 mm︱y-travel 800 mm︱z-travel 880 mm︱Control Mazatrol 640M ︱tool taper 50 SK︱no. of tools in magazin 80 ︱pallet size: 630 x 630 mm︱numbers of pallets 2 ︱table - indexing 360 x 1° deg︱total power requirement 60,4 kVA︱weight of the machine ca. 19,7 t︱dimensions of the machine ca. m︱pallet-changer
          Transport dimensions: Width: 2,60 m Hight: 3,20 m Length: 6,40 m
            x-travel 1050 mm
            y-travel 800 mm
            z-travel 880 mm
            Control Mazatrol 640M
            tool taper 50 SK
            no. of tools in magazin 80
            pallet size: 630 x 630 mm
            numbers of pallets 2
            table - indexing 360 x 1° deg
            total power requirement 60,4 kVA
            weight of the machine ca. 19,7 t
            Description :
            Transport dimensions:
            Width: 2,60 m
            Hight: 3,20 m
            Length: 6,40 m
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MAZAK FH 880


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06044 · Machining Center - Horizontal

          MAZAK - FH 880 - - 1997-11 - Mazatrol

          Technical details
          x-travel 1300 mm︱y-travel 1100 mm︱z-travel 1000 mm︱Control Mazatrol ︱tool taper 50 SK︱no. of tools in magazin 80 ︱pallet size: 800 x 800 mm︱numbers of pallets 2 ︱rotary table: gesteuert 4. Achse 4-axis ︱total power requirement kVA︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱pallet-changer
            x-travel 1300 mm
            y-travel 1100 mm
            z-travel 1000 mm
            Control Mazatrol
            tool taper 50 SK
            no. of tools in magazin 80
            pallet size: 800 x 800 mm
            numbers of pallets 2
            rotary table: gesteuert 4. Achse 4-axis
            weight of the machine ca. 24 t
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal QUASER MF 630C


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08361 · Machining Center - Universal

          QUASER - MF 630C - - 2015 - Siemens 828 D

          Technical details
          x-travel 800 mm︱y-travel 700 mm︱z-travel 610 mm︱Control Siemens 828 D ︱total power requirement kW︱weight of the machine ca. 8,7 t︱dimensions of the machine ca. m︱
          ONLY 2800 HOURS SPINDLE WORKS Description The QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. Specification Table size 500mm diameter Travels – X/Y/Z axes 800 x 700 x 610 mm A Axis + 30 deg ~ -120 deg C Axis 360 deg continous Maximum swing 630 mm Table surface to spindle nose -25mm ~ 585mm Spindle nose to tilting centre at 90 deg -25mm ~ 585mm Maximum work piece of size 630mm dia x 300mm Table load capacity 300kg Spindle taper BT40 Spindle options 10,000 / 12,000 / 15,000rpm ATC – Standard 30 Station ATC – Option 48 / 60 Station Machine weight 8750kg Features: Multi-face machining centre Siemens 828 D CNC Control 630mm maximum swing dia x 300mm high 40 Taper spindle Spindle oil chiller or ECO Chiller 30 station ATC (Options available) Coolant wash gun Coolant wash down Chip augers Cutter air blast Worklight Machine status light
            x-travel 800 mm
            y-travel 700 mm
            z-travel 610 mm
            Control Siemens 828 D
            weight of the machine ca. 8,7 t
            Description :
            ONLY 2800 HOURS SPINDLE WORKS

            Description
            The QUASER MF vertical machining centres are highly versatile, offering high
            speed, high powered machining with 4+1 and full 5-axis machining capability
            along with large X-axis machines with a compact footprint. Superb build quality
            and stability for high volume production, toolroom and subcontract machining
            environments.

            Specification
            Table size 500mm diameter
            Travels – X/Y/Z axes 800 x 700 x 610 mm
            A Axis + 30 deg ~ -120 deg
            C Axis 360 deg continous
            Maximum swing 630 mm
            Table surface to spindle nose -25mm ~ 585mm
            Spindle nose to tilting centre at 90 deg -25mm ~ 585mm
            Maximum work piece of size 630mm dia x 300mm
            Table load capacity 300kg
            Spindle taper BT40
            Spindle options 10,000 / 12,000 / 15,000rpm
            ATC – Standard 30 Station
            ATC – Option 48 / 60 Station
            Machine weight
            8750kg
            Features:
            Multi-face machining centre
            Siemens 828 D CNC Control
            630mm maximum swing dia x 300mm high
            40 Taper spindle
            Spindle oil chiller or ECO Chiller
            30 station ATC (Options available)
            Coolant wash gun
            Coolant wash down
            Chip augers
            Cutter air blast
            Worklight
            Machine status light

          Datasheet
          Request / Contact
          used  Machining Center - Universal QUASER MF 400C


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06035 · Machining Center - Universal

          QUASER - MF 400C - - 2012 - Siemens 828 D

          Technical details
          x-travel 410 mm︱y-travel 610 mm︱z-travel 500 mm︱Control Siemens 828 D ︱total power requirement kW︱weight of the machine ca. 7,3 t︱dimensions of the machine ca. m︱
          5 axis (3+2) vertical machining center Furnishing: Siemens 828 D control with Shopmill for 5 side processing (3+2), including software option network drives Portable electronic hand wheel Double-arm tool changer with 30 storage locations Large dimensioned linear guides in all axes, roller guides in the Z axis Highly dynamic digital feed drives with 6283N/6283N/12566N (X/Y/Z) axis force Computer-optimized, heavy machine body made of heavily ribbed cast iron - rapid traverse 36 m/min (Z 24 m/min), Acceleration (X/Y/Z) 4/3/2 m/sec² Cooling system for main spindle with separate 100 l oil cooling circuit and air supply for main engine 2 screw conveyors in the working area Coolant tank with a capacity of 300 l - tapping without length compensation Flood cooling, with 10 adjustable rings located on the spindle nose Outlet nozzles, flow rate 60l/min at 3.5 bar - coolant spray gun Work area full protection with large viewing door and 2 work area lights, as well as machinery Status light - air blast, external, for dry machining Two-tone paintwork in light grey/grey Automatic central lubrication for the ball screw spindles - Quaser machining centers comply with CE Standard Equipment according to CE for Quaser MF 400C Documentation for Quaser MF 400C 40 l spindle cooling oil Mobil Velocite No. 3 OPTION SPINDLE (included) Main spindle direct drive 12,000 rpm, SK 40, including temperature-controlled cooling system for the main spindle (IKZ 20 bar optional possible) OPTION IKZ (included) Internal coolant supply 20 bar, including preparation with Grundfoss pump, 25 l/min, incl. cartridge filter 25 ì CHIP CONVEYOR OPTION (included) Chip conveyor (scraper belt) for lateral disposal Specifications MF 400C Construction [h/v] vertical X-axis travel [mm] 410 Travel Y-axis [mm] 610 Z-axis travel [mm] 500 Main spindle speed max. [rpm] 10,000 Main spindle power max. [kW] 13.5/17 Number of tool magazine places [pcs] 30 Pan axis [°] +30 ~ -120 Axis of rotation [°] 360 Table/oscillation diameter [mm] 400 The table has a 300 mm clamping surface
            x-travel 410 mm
            y-travel 610 mm
            z-travel 500 mm
            Control Siemens 828 D
            weight of the machine ca. 7,3 t
            Description :
            5 axis (3+2) vertical machining center

            Furnishing:
            Siemens 828 D control with Shopmill for 5 side processing
            (3+2), including software option network drives
            Portable electronic hand wheel
            Double-arm tool changer with 30 storage locations
            Large dimensioned linear guides in all axes, roller guides in the
            Z axis
            Highly dynamic digital feed drives with 6283N/6283N/12566N (X/Y/Z)
            axis force
            Computer-optimized, heavy machine body made of heavily ribbed cast iron -
            rapid traverse 36 m/min (Z 24 m/min),
            Acceleration (X/Y/Z) 4/3/2 m/sec²
            Cooling system for main spindle with separate 100 l oil cooling circuit and air
            supply
            for main engine
            2 screw conveyors in the working area
            Coolant tank with a capacity of 300 l - tapping without length compensation
            Flood cooling, with 10 adjustable rings located on the spindle nose
            Outlet nozzles, flow rate 60l/min at 3.5 bar - coolant spray gun
            Work area full protection with large viewing door and 2 work area lights, as
            well as
            machinery
            Status light - air blast, external, for dry machining
            Two-tone paintwork in light grey/grey
            Automatic central lubrication for the ball screw spindles -
            Quaser machining centers comply with CE
            Standard Equipment according to CE for Quaser MF 400C Documentation for Quaser
            MF 400C
            40 l spindle cooling oil Mobil Velocite No. 3

            OPTION SPINDLE (included)
            Main spindle direct drive 12,000 rpm, SK 40, including
            temperature-controlled cooling system for the main spindle (IKZ 20 bar optional
            possible)
            OPTION IKZ (included)
            Internal coolant supply 20 bar, including preparation with
            Grundfoss pump, 25 l/min, incl. cartridge filter 25 ì
            CHIP CONVEYOR OPTION (included)
            Chip conveyor (scraper belt) for lateral disposal

            Specifications MF 400C
            Construction [h/v] vertical
            X-axis travel [mm] 410
            Travel Y-axis [mm] 610
            Z-axis travel [mm] 500
            Main spindle speed max. [rpm] 10,000
            Main spindle power max. [kW] 13.5/17
            Number of tool magazine places [pcs] 30
            Pan axis [°] +30 ~ -120
            Axis of rotation [°] 360
            Table/oscillation diameter [mm] 400
            The table has a 300 mm clamping surface
          Datasheet
          Request / Contact
          used  Machining Center - Universal DECKEL-MAHO DMC 75V linear


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2170 · Machining Center - Universal

          DECKEL-MAHO - DMC 75V linear - - 2006 - Heidenhain TNC 530

          Technical details
          x-travel 885 mm︱y-travel 600 mm︱z-travel 600 mm︱Control Heidenhain TNC 530 ︱total power requirement 73 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          5-axis universal machining center with swivel spindle and rotary table. The spindle was replaced in November 2017. The machine has never seen heavy cutting and runs exclusively for aluminum and ureol production. Equipment: 3D CNC control Heidenhain iTNC 530 with SMART NC Linear drives Temperature compensation in the Z-axis Active cooling unit for the drives, control cabinet and motor spindle Direct measuring system 30-pos tool changer (plate) Bed flush Tool laser measurement BLUM (tool length and diameter measurement) Heidenhain TS 640 infrared probe Signal lamp, four-colored Rotating window on the operator door Second processor card Application Tuning Cycle ATC software for selecting the one for the current editing optimal editing mode Heidenhain HR 410 hand control bar for set-up operations Operating mode 4 (process monitoring in production) Screen text German / English Documentation in German consisting of operator manual and control manual Scraper chip conveyor Travels X-axis 885 mm (increased travel)! Y-axis 600 mm Z-axis 600 mm (increased travel)! Spindle speed max. 28000 rpm. Tool holder HSK A-63 B-axis + 10 deg. to -110 deg. swivel range Max. Speed of rotation 50 rpm. Max. Torque swivel axis 750 Nm Holding torque swivel axis 1200 Nm C-axis / rotary table 360 deg. Table size 950 x 650 mm Max. Speed of rotation 100 rpm. Holding torque turntable 3000 Nm Max. Table load with rotating C-axis 600 kg Rapid traverse 90 m / min. The machine has no internal coolant supply through the work spindle!
            x-travel 885 mm
            y-travel 600 mm
            z-travel 600 mm
            Control Heidenhain TNC 530
            total power requirement 73 kVA
            Description :
            5-axis universal machining center with swivel spindle and
            rotary table.

            The spindle was replaced in November 2017.
            The machine has never seen heavy cutting and runs exclusively
            for aluminum and ureol production.

            Equipment:
            3D CNC control Heidenhain iTNC 530 with SMART NC
            Linear drives
            Temperature compensation in the Z-axis
            Active cooling unit for the drives, control cabinet and motor spindle
            Direct measuring system
            30-pos tool changer (plate)
            Bed flush
            Tool laser measurement BLUM (tool length and diameter measurement)
            Heidenhain TS 640 infrared probe
            Signal lamp, four-colored
            Rotating window on the operator door
            Second processor card
            Application Tuning Cycle ATC software for selecting the one for the current
            editing optimal editing mode
            Heidenhain HR 410 hand control bar for set-up operations
            Operating mode 4 (process monitoring in production)
            Screen text German / English
            Documentation in German consisting of operator manual and control manual
            Scraper chip conveyor

            Travels
            X-axis 885 mm (increased travel)!
            Y-axis 600 mm
            Z-axis 600 mm (increased travel)!

            Spindle speed max. 28000 rpm.
            Tool holder HSK A-63

            B-axis + 10 deg. to -110 deg. swivel range
            Max. Speed of rotation 50 rpm.
            Max. Torque swivel axis 750 Nm
            Holding torque swivel axis 1200 Nm

            C-axis / rotary table 360 deg.
            Table size 950 x 650 mm
            Max. Speed of rotation 100 rpm.
            Holding torque turntable 3000 Nm
            Max. Table load with rotating C-axis 600 kg

            Rapid traverse 90 m / min.

            The machine has no internal coolant supply through the work spindle!
          Datasheet
          Request / Contact
          used  Machining Center - Universal HAAS UMC 1000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06027 · Machining Center - Universal

          HAAS - UMC 1000 - - 08/2020 -

          Technical details
          x-travel 1016 mm︱y-travel 635 mm︱z-travel 635 mm︱total power requirement kW︱weight of the machine ca. 7077 kg︱dimensions of the machine ca. m︱
          5 axis universal machining center Equipment: CNC control Haas (Fanuc based) including some extensions 30-fold tool changer Renishaw measuring system Security Camera Internet connection Coolant through spindle with extra filter 5-axis machining is an effective way to reduce setup time reduce and increase the accuracy of multi-sided and complex workpieces raise. The larger travels and larger platter of the Haas Universal machining centers of the UMC-1000 series make them perfect Solutions for 3+2 machining and 5-axis simultaneous machining of large parts. Highlights: 5-axis simultaneous machining Powerful spindle with inline direct drive Large capacity side mounted tool changer With wireless, intuitive measuring probe system Made in the USA traverse paths X axis 1016mm Y axis 635mm Z axis 635 mm Spindle nose to platter (~ max.)737 mm Spindle nose to platter (~ min.)102 mm spindle Max. rated power 22.4 kW Max. speed 8100 rpm. Max. torque 122.0 Nm - 2000 rpm. Cone CT or BT 40 Bearing Lubrication Air / Oil Injection Cooling Liquid Cooled B-Axis - Tilt Angle Pivoting range +110° / -30° Max speed 50°/sec Max. torque 3037 Nm Braking torque 2712 Nm C Axis - rotation Rotation range 360° Max speed 50°/sec Max. torque 2514 Nm Max. workpiece swing diameter 864 mm Braking torque 1220 Nm CNC rotary table Clamping surface diameter 635 mm Max. load capacity on platter 454.0 kg Width of T-slots 15.90 mm to 16.00 mm Center distance of the T-slots 125 mm Number of T-slots in basic configuration 7 Max. feed rate for chipping 16.5 m/min Rapid traverses at X 22.9 m/min Rapid traverse to Y 22.9 m/min Rapid traverse at Z 22.9 m/min axis motors Max. thrust X 14680 N Max. thrust Y 14680 N Max. thrust Z 18015 N tool changer Carrying capacity 30+1 30+1 Max. tool diameter (full) 64 mm Max. tool diameter (adjacent places empty) 127 mm Max. tool length (from cone line)305 mm Max. tool weight 5.4 kg Tool-to-Tool (average) 2.8 s Chip to chip (average) 3.6 s
            x-travel 1016 mm
            y-travel 635 mm
            z-travel 635 mm
            weight of the machine ca. 7077 kg
            Description :
            5 axis universal machining center

            Equipment:
            CNC control Haas (Fanuc based) including some extensions
            30-fold tool changer
            Renishaw measuring system
            Security Camera
            Internet connection
            Coolant through spindle with extra filter

            5-axis machining is an effective way to reduce setup time
            reduce and increase the accuracy of multi-sided and complex workpieces
            raise. The larger travels and larger platter of the Haas
            Universal machining centers of the UMC-1000 series make them perfect
            Solutions for 3+2 machining and 5-axis simultaneous machining of large
            parts.

            Highlights:
            5-axis simultaneous machining
            Powerful spindle with inline direct drive
            Large capacity side mounted tool changer
            With wireless, intuitive measuring probe system
            Made in the USA

            traverse paths
            X axis 1016mm
            Y axis 635mm
            Z axis 635 mm
            Spindle nose to platter (~ max.)737 mm
            Spindle nose to platter (~ min.)102 mm

            spindle
            Max. rated power 22.4 kW
            Max. speed 8100 rpm.
            Max. torque 122.0 Nm - 2000 rpm.
            Cone CT or BT 40
            Bearing Lubrication Air / Oil Injection
            Cooling Liquid Cooled

            B-Axis - Tilt Angle
            Pivoting range +110° / -30°
            Max speed 50°/sec
            Max. torque 3037 Nm
            Braking torque 2712 Nm

            C Axis - rotation
            Rotation range 360°
            Max speed 50°/sec
            Max. torque 2514 Nm
            Max. workpiece swing diameter 864 mm
            Braking torque 1220 Nm

            CNC rotary table
            Clamping surface diameter 635 mm
            Max. load capacity on platter 454.0 kg
            Width of T-slots 15.90 mm to 16.00 mm
            Center distance of the T-slots 125 mm
            Number of T-slots in basic configuration 7

            Max. feed rate for chipping 16.5 m/min
            Rapid traverses at X 22.9 m/min
            Rapid traverse to Y 22.9 m/min
            Rapid traverse at Z 22.9 m/min

            axis motors
            Max. thrust X 14680 N
            Max. thrust Y 14680 N
            Max. thrust Z 18015 N

            tool changer
            Carrying capacity 30+1 30+1
            Max. tool diameter (full) 64 mm
            Max. tool diameter (adjacent places empty) 127 mm
            Max. tool length (from cone line)305 mm
            Max. tool weight 5.4 kg
            Tool-to-Tool (average) 2.8 s
            Chip to chip (average) 3.6 s
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Profilo del commerciante: Knops Werkzeugmaschinen
          GmbH & Co. KG

          Contatta Trader



            Knop macchine utensili
          GmbH & Co. KG

           Konrad Zuse Street 5
            40789 - Monheim
            Germania
            02173 - 39494-0">02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de

          Profilo di Trader




          Knops Werkzeugmaschinen GmbH  &  Co. KG  40789 - Monheim Konrad-Zuse-Straße 5 Deutschland
          Knops Werkzeugmaschinen GmbH & Co. KG

          Konrad-Zuse-Straße 5



          Contact Trader


            Knops Werkzeugmaschinen GmbH & Co. KG
           Konrad-Zuse-Straße 5
            40789 - Monheim
            Deutschland
            02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Aufspannwinkel · Bandsäge - horizontal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Doppelständer-Vert · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Brennschneidemaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Drehbarer Aufspanntisch · Drehmaschine - zyklengesteuert · Ersatzteile · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine - Doppelständer · Flachschleifmaschine - Horizontal · Fräseinrichtung · Führungsbahnenschleifmaschine · Gewindefräsmaschine · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Keilwellenschleifmaschine · Konsolfräsmaschine · Konsolfräsmaschine - universal · Koordinatenmessmaschine · Koordinatenschleifmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Plan- und Spitzendrehbank · Planscheibe · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Roboter - Handling · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtaktmaschine · Rundtisch · Schweißdrehtisch - rund · Schwerdrehmaschine · Senkerodiermaschine · Spitzenlose - Rundschleifmaschine · Spritzgiessmaschine bis 1000 KN · Stanzautomat-Einständer · Starrbettfräsmaschine · Säge- und Bohranlage · Tafelschere - hydraulisch · Tieflochbohrmaschine · Traghülsenplattenbohrwerk · Warenspeicher · Werkzeug Voreinstellgerät · Werkzeugschleifmaschine - Universal · Zahnrad-Abwälzfräsmaschine - vertikal · Zubehör ·