Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools - Stockist for used machines

          Machinelist:


          Heavy Duty Lathe

          used  Heavy Duty Lathe SAFOP Leonard CNC 1000/1800 S


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03174 · Heavy Duty Lathe

          SAFOP - Leonard CNC 1000/1800 S - - retrofit 2013 - Sinumerik 840 D PL

          Technical details
          turning length 10000 mm︱greates pass round over bed 2200 mm︱swing diameter max. over cross slide 1800 mm︱Control Sinumerik 840 D PL ︱centre height 1100 mm︱centre distance 11450 mm︱faceplate diameter 1985 mm︱spindle bore 480 mm︱turning speed range 1-150 U/min︱number of gear steps 3 ︱face slide travel 800 mm︱feeds of cross-slide 0 - 4000 mm/min︱longitudinal feeds 0 - 4000 mm/min︱workpiece weight max. 80000 kg︱main drive 100 kW︱total power requirement 145 kW︱weight of the machine ca. 110,82 t︱dimensions of the machine ca. 19,0 x 4,48 x 3,35 m︱
          Accessories/Equipment: - chip conveyor - KSS system 2000 l - 3 pcs. steady rests - SAUTER RHN 500 turret - boring support - documentation
            turning length 10000 mm
            greates pass round over bed 2200 mm
            swing diameter max. over cross s. 1800 mm
            Control Sinumerik 840 D PL
            centre height 1100 mm
            centre distance 11450 mm
            faceplate diameter 1985 mm
            spindle bore 480 mm
            turning speed range 1-150 U/min
            number of gear steps 3
            face slide travel 800 mm
            feeds of cross-slide 0 - 4000 mm/min
            longitudinal feeds 0 - 4000 mm/min
            workpiece weight max. 80000 kg
            main drive 100 kW
            total power requirement 145 kW
            weight of the machine ca. 110,82 t
            dimensions of the machine ca. 19,0 x 4,48 x 3,35 m
            Description :
            Accessories/Equipment:
            - chip conveyor
            - KSS system 2000 l
            - 3 pcs. steady rests
            - SAUTER RHN 500 turret
            - boring support
            - documentation
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine RASOMA DZS 125


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03125 · Vertical Turning Machine

          RASOMA - DZS 125 - - 2014 - Siemens 840D sl

          Technical details
          turning diameter ca. 200 mm︱swing diameter 320 mm︱turning height ca. 300 mm︱faceplate diameter 125 mm︱control Siemens 840D sl ︱chuck diameter 125 mm︱x-axis 720/1520/2320 mm︱y-axis +/- 40 mm︱z-axis 300 mm︱rapid traverse X-axis 80 m/min︱rapid traverse Z-axis 60 m/min︱max. turning speed 4000 U/min︱total power requirement 60 kW︱weight of the machine ca. 12 t︱
            turning diameter ca. 200 mm
            swing diameter 320 mm
            turning height ca. 300 mm
            faceplate diameter 125 mm
            control Siemens 840D sl
            chuck diameter 125 mm
            x-axis 720/1520/2320 mm
            y-axis +/- 40 mm
            z-axis 300 mm
            rapid traverse X-axis 80 m/min
            rapid traverse Z-axis 60 m/min
            max. turning speed 4000 U/min
            total power requirement 60 kW
            weight of the machine ca. 12 t
            Description :

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column SCHIESS VMG 6 PS


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03168 · Vertical Turret Lathe - Double Column

          SCHIESS - VMG 6 PS - - 2010 - Siemens 840D PL

          Technical details
          faceplate diameter 6.000 mm︱max. machining diameter when turning 10.000 mm︱max. machining height 3.500 mm︱faceplate turning speed range 0 - 40 U/min︱max. torque on the faceplate 335.000 Nm︱workpiece weight max. 180.000 kg︱x-axis 10450 mm︱y-axis 6000 mm︱z-axis 2.000 mm︱w-axis 2.400 mm︱Control Siemens 840D PL ︱rapid traverse X/Z/Y 0-16 m/min.︱feed speeds x/y/z axis 0-16.000 mm/min︱feed speed w-axis 2.000 mm/min︱Main drive 214 kW︱total power requirement 550 kW︱weight of the machine ca. ca. 300 t︱dimensions of the machine ca. 18 x 20 x 9,5 m︱
          CNC gantry machining center for turning/milling/ gear cutting/grinding with Y-axis Equipment/Accessories: - drilling and milling device (masterhead principle) power S1 (100 % ED) spindle speeds stage 1 375 rpm stage 2 1500 rpm stage 3 3000 rpm torque at the spindle Stage 1 6000 Nm Stage 2 1500 Nm Stage 3 375 Nm - integreated C-axis feeding torque max. 6000 Nm clamping torque 30000 Nm swivel range +/- 240 degrees - disc magazine height-adjustable number of slots for processing heads 6 nos. - modular turning tool holder horizontal taper CAPTO C8 vertical taper CAPTO C8 - straight milling and drilling head GB 1H power 63 kW spindle torque 6000 Nm speed 3000 rpm tools DIN 69871 Form AD SK 50 - angular milling and drilling head WB 1H power 54 kW spindle torque 3600 Nm speed 3000 rpm tools DIN 69871 Form AD SK 50 swivel range ± 240 degrees - universal milling and drilling head UB 1H power 35 kW spindle torque 1400 Nm speed 3000 rpm tools DIN 69871 Form AD SK 50 swivel range ± 240 degrees swivel range of the axis ± 95 degrees - special gear cutting head power 31.5 kW spindle torque 2600 Nm speed 400 rpm tool holder on both sides DIN 2079 SK 60 module 30 diameter of the cutters 550-600 mm min. inner diameter for internal gear cutting 2000 mm - GMN electric grinding spindle TSEV 120s - 7.5/1500 manually mountable for vertical and horizontal spindle position sleeve diameter 120 mm / h5 spindle length approx. 390 mm direction of rotation right and left for replaceable grinding wheel flanges direct attached, closed three-phase motor 4-pole 7.5 kW; 230/400 V - chain tool magazine number of places for SK tools 40 pcs. tool diameter fully occupied 130 mm for free adjoining seats 250 mm tool length 400 mm tool weight 35 kg - chip conveyor total 4 nos. in Y and X direction - coolant device 2500 l, 4 bar/ 20 bar - workpiece measurement - teleservice - 2 sets of clamping jaws - table extensions - documentation
            faceplate diameter 6.000 mm
            max. machining diameter when tur. 10.000 mm
            max. machining height 3.500 mm
            faceplate turning speed range 0 - 40 U/min
            max. torque on the faceplate 335.000 Nm
            workpiece weight max. 180.000 kg
            x-axis 10450 mm
            y-axis 6000 mm
            z-axis 2.000 mm
            w-axis 2.400 mm
            Control Siemens 840D PL
            rapid traverse X/Z/Y 0-16 m/min.
            feed speeds x/y/z axis 0-16.000 mm/min
            feed speed w-axis 2.000 mm/min
            Main drive 214 kW
            total power requirement 550 kW
            weight of the machine ca. ca. 300 t
            dimensions of the machine ca. 18 x 20 x 9,5 m
            Description :
            CNC gantry machining center for turning/milling/
            gear cutting/grinding with Y-axis

            Equipment/Accessories:
            - drilling and milling device (masterhead principle)
            power S1 (100 % ED)
            spindle speeds
            stage 1 375 rpm
            stage 2 1500 rpm
            stage 3 3000 rpm
            torque at the spindle
            Stage 1 6000 Nm
            Stage 2 1500 Nm
            Stage 3 375 Nm

            - integreated C-axis
            feeding torque max. 6000 Nm
            clamping torque 30000 Nm
            swivel range +/- 240 degrees

            - disc magazine height-adjustable
            number of slots for processing heads 6 nos.
            - modular turning tool holder
            horizontal taper CAPTO C8
            vertical taper CAPTO C8
            - straight milling and drilling head GB 1H
            power 63 kW
            spindle torque 6000 Nm
            speed 3000 rpm
            tools DIN 69871 Form AD SK 50
            - angular milling and drilling head WB 1H
            power 54 kW
            spindle torque 3600 Nm
            speed 3000 rpm
            tools DIN 69871 Form AD SK 50
            swivel range ± 240 degrees
            - universal milling and drilling head UB 1H
            power 35 kW
            spindle torque 1400 Nm
            speed 3000 rpm
            tools DIN 69871 Form AD SK 50
            swivel range ± 240 degrees
            swivel range of the axis ± 95 degrees
            - special gear cutting head
            power 31.5 kW
            spindle torque 2600 Nm
            speed 400 rpm
            tool holder on both sides DIN 2079 SK 60
            module 30
            diameter of the cutters 550-600 mm
            min. inner diameter for internal gear cutting 2000 mm
            - GMN electric grinding spindle TSEV 120s - 7.5/1500
            manually mountable for vertical and horizontal spindle position
            sleeve diameter 120 mm / h5
            spindle length approx. 390 mm
            direction of rotation right and left
            for replaceable grinding wheel flanges
            direct attached, closed three-phase motor 4-pole
            7.5 kW; 230/400 V
            - chain tool magazine
            number of places for SK tools 40 pcs.
            tool diameter
            fully occupied 130 mm
            for free adjoining seats 250 mm
            tool length 400 mm
            tool weight 35 kg

            - chip conveyor total 4 nos. in Y and X direction
            - coolant device 2500 l, 4 bar/ 20 bar
            - workpiece measurement
            - teleservice
            - 2 sets of clamping jaws
            - table extensions
            - documentation


          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column UMARO SC53CC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03165 · Vertical Turret Lathe - Double Column

          UMARO - SC53CC - - 2008 -

          Technical details
          faceplate diameter 4000 mm︱swing diameter 5300 mm︱turning height 1800 mm︱workpiece weight max. 18 t︱ram head - vertical travel 1200 mm︱ram swivable +/- 30 °︱ram head - cross travel 2900 mm︱Main drive 64,5 kW︱number of gear stages 3 ︱faceplate speed 2-90 U/min︱total power requirement 90 kW︱weight of the machine ca. 68 t︱dimensions of the machine ca. 9,8 x 7,4 x 5,4 m︱
          Acessories/Equipment: - 2 vertical supports - face plate with 4 clamping jaws - chip conveyor - documentation
            faceplate diameter 4000 mm
            swing diameter 5300 mm
            turning height 1800 mm
            workpiece weight max. 18 t
            ram head - vertical travel 1200 mm
            ram swivable +/- 30 °
            ram head - cross travel 2900 mm
            Main drive 64,5 kW
            number of gear stages 3
            faceplate speed 2-90 U/min
            total power requirement 90 kW
            weight of the machine ca. 68 t
            dimensions of the machine ca. 9,8 x 7,4 x 5,4 m
            Description :
            Acessories/Equipment:

            - 2 vertical supports
            - face plate with 4 clamping jaws
            - chip conveyor
            - documentation
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column PIETRO CARNAGHI AP 80 TM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02941 · Vertical Turret Lathe - Double Column

          PIETRO CARNAGHI - AP 80 TM - - 2002 - Siemens 840C

          Technical details
          faceplate diameter 8000 mm︱swing diameter 8500 mm︱turning height 6550 mm︱control Siemens 840C ︱workpiece weight max. 200 t︱faceplate turning speed range -stepless- 1 - 42 U/min︱max. torque on the faceplate 286000 Nm︱ram head dimension 400 x 400 mm︱ram travel - cross (z-axis) 3200 mm︱ram travel - cross (x-axis) 10850 mm︱cross beam travel - vertical 23 x 13 x 12,4 mm︱ram stroke - vertical 350 mm/min︱rapid traverse of the ram (vertical and cross) 10 m/min︱main drive motor 100 kW︱workpiece drive capacity 55 kW︱total power requirement 187 kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 23 x 13 x 12,4 m︱
          Equipment / Accessories: - hydrostatic guideways x- and z-axis - tool head changer 12-fold - c-axis with driven tools (ISO 50) - angular milling head with b-axis - facing slide with u-axis - operator platform height adjustable - camera in process control - chip conveyor - KNOLL coolant system - internal coolant supply
            faceplate diameter 8000 mm
            swing diameter 8500 mm
            turning height 6550 mm
            control Siemens 840C
            workpiece weight max. 200 t
            faceplate turning speed range -s. 1 - 42 U/min
            max. torque on the faceplate 286000 Nm
            ram head dimension 400 x 400 mm
            ram travel - cross (z-axis) 3200 mm
            ram travel - cross (x-axis) 10850 mm
            cross beam travel - vertical 23 x 13 x 12,4 mm
            ram stroke - vertical 350 mm/min
            rapid traverse of the ram (verti. 10 m/min
            main drive motor 100 kW
            workpiece drive capacity 55 kW
            total power requirement 187 kW
            weight of the machine ca. 300 t
            dimensions of the machine ca. 23 x 13 x 12,4 m
            Description :
            Equipment / Accessories:
            - hydrostatic guideways x- and z-axis
            - tool head changer 12-fold
            - c-axis with driven tools (ISO 50)
            - angular milling head with b-axis
            - facing slide with u-axis
            - operator platform height adjustable
            - camera in process control
            - chip conveyor
            - KNOLL coolant system
            - internal coolant supply
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal STARRAG HECKERT HEC 630 Athletic


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03164 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 630 Athletic - - 2010 - Sinumerik 840D power line

          Technical details
          x-travel 1200 mm︱y-travel 950 mm︱z-travel 1200 mm︱Control Sinumerik 840D power line︱B-axis: ︱pallet clamping area 800 x 630 mm︱max. load 1500 kg︱workpiece interference circle diameter 1250 mm︱workpiece height max. 1200 mm︱number of exchangeable pallets 2 ︱change time of pallets 14 sec︱working spindle: ︱tool taper HSK-A100 ︱power capacity at 25% load 67 kw︱torque (25% ED) 1508 Nm︱turning speed range 20 - 6000 U/min︱feed speeds x/y/z axis 60000 mm/min︱acceleration X/Y/Z axis 6/6/5 m/s²︱feed capacity X/Y/Z axis 22/18/22 kN︱weight of the machine ca. 25 t︱
          Equipment / Accessories: - CNC control Sinumerik 840D power line - 2 rectangular pallets 800 x 630 mm - increased main drive power up to 37 kW - drive power: at 25% ED = 67 kW / at 100% ED = 37 kW - torque: at 25% ED = 1508 Nm / at 100% ED = 1194 Nm - coolant unit fleece gravity filter - switchable in 7 stages up to max. 50 bar, 1350 l capacity - increase of coolant pressure to 80 bar - surge shower approx. 200 l/min - emission extraction working area - Visiport electric - clamping station platform - optical measuring probe RENISHAW - milling of cylinder paths - memory expansion CNC user memory by 1.0 MB (up to 3x possible) - workload monitoring - automatic optimisation of the B-axis - warm-up program - tool chain magazine 60 places, HSK-A100 - 4 clamping angles - various tool holders and tools - measuring probe - documentation
            x-travel 1200 mm
            y-travel 950 mm
            z-travel 1200 mm
            Control Sinumerik 840D power line
            pallet clamping area 800 x 630 mm
            max. load 1500 kg
            workpiece interference circle di. 1250 mm
            workpiece height max. 1200 mm
            number of exchangeable pallets 2
            change time of pallets 14 sec
            tool taper HSK-A100
            power capacity at 25% load 67 kw
            torque (25% ED) 1508 Nm
            turning speed range 20 - 6000 U/min
            feed speeds x/y/z axis 60000 mm/min
            acceleration X/Y/Z axis 6/6/5 m/s²
            feed capacity X/Y/Z axis 22/18/22 kN
            weight of the machine ca. 25 t
            Description :
            Equipment / Accessories:
            - CNC control Sinumerik 840D power line
            - 2 rectangular pallets 800 x 630 mm
            - increased main drive power up to 37 kW
            - drive power: at 25% ED = 67 kW / at 100% ED = 37 kW
            - torque: at 25% ED = 1508 Nm / at 100% ED = 1194 Nm
            - coolant unit fleece gravity filter
            - switchable in 7 stages up to max. 50 bar, 1350 l capacity
            - increase of coolant pressure to 80 bar
            - surge shower approx. 200 l/min
            - emission extraction working area
            - Visiport electric
            - clamping station platform
            - optical measuring probe RENISHAW
            - milling of cylinder paths
            - memory expansion CNC user memory by 1.0 MB (up to 3x possible)
            - workload monitoring
            - automatic optimisation of the B-axis
            - warm-up program
            - tool chain magazine 60 places, HSK-A100
            - 4 clamping angles
            - various tool holders and tools
            - measuring probe
            - documentation
          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C COLGAR FRAL 400


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03166 · Ram-Type Floor Boring and Milling M/C

          COLGAR - FRAL 400 - - 2004 - Heidenhain iTNC 530

          Technical details
          spindle diameter 150 mm︱x-travel 18000 mm︱y-travel 4500 mm︱z-travel 1250 mm︱w-travel 900 mm︱Control Heidenhain iTNC 530 ︱speed of spindle 5-3.000 rpm︱max. torque 4000 Nm︱tool changer 90 Plätze︱feeds X/Y/Z/W: 20000 mm/min︱tool taper SK 50
          Accessories/Equipment: Power capacity: Spindle (S1) 60 kW Spindle (S2) 80 kW Axis feed Moter 50 Nm -internal an external coolant supply -hydrostatic guideways -without floor plates and table -electrical and mechanical preparation for table and programmable universal head -documentation
            spindle diameter 150 mm
            x-travel 18000 mm
            y-travel 4500 mm
            z-travel 1250 mm
            w-travel 900 mm
            Control Heidenhain iTNC 530
            speed of spindle 5-3.000 rpm
            max. torque 4000 Nm
            tool changer 90 Plätze
            feeds X/Y/Z/W: 20000 mm/min
            tool taper SK 50
            Description :
            Accessories/Equipment:

            Power capacity:
            Spindle (S1) 60 kW
            Spindle (S2) 80 kW
            Axis feed Moter 50 Nm

            -internal an external coolant supply
            -hydrostatic guideways
            -without floor plates and table
            -electrical and mechanical preparation for table and programmable universal head
            -documentation
          Datasheet
          Request / Contact

          Double Column Milling M/C - Gantry Type

          used  Double Column Milling M/C - Gantry Type ZAYER GMCU 10000-AR


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03171 · Double Column Milling M/C - Gantry Type

          ZAYER - GMCU 10000-AR - - 2009 - Heidenhain iTNC 530

          Technical details
          x-travel 10000 mm︱y-travel 4050 mm︱z-travel 1100 mm︱w-travel 1200 mm︱control Heidenhain iTNC 530 ︱passage height of the portal 2100 mm︱passage width of the portal 3200 mm︱feeds 6 - 10000 mm/min︱rapid traverse feeds 25000 mm/min︱table load 25 t︱tool taper ISO 50 ︱tool length - max. 300 mm︱workpiece weight max. 25 kg︱revolutions of main spindle 40 - 6000 U/min︱drive capacity - spindle motor 40 kW︱total power requirement 142 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Accessories/Equipment: - universal milling head - automatic - angular milling head - 90° - spindle extension - automatic tool changer with 40 places - table enlargement supporter - width up to 3000 mm - internal coolant supply at the spindle - compressed air 6 bar, 500 l/min - documentation
            x-travel 10000 mm
            y-travel 4050 mm
            z-travel 1100 mm
            w-travel 1200 mm
            control Heidenhain iTNC 530
            passage height of the portal 2100 mm
            passage width of the portal 3200 mm
            feeds 6 - 10000 mm/min
            rapid traverse feeds 25000 mm/min
            table load 25 t
            tool taper ISO 50
            tool length - max. 300 mm
            workpiece weight max. 25 kg
            revolutions of main spindle 40 - 6000 U/min
            drive capacity - spindle motor 40 kW
            total power requirement 142 kW
            Description :
            Accessories/Equipment:
            - universal milling head - automatic
            - angular milling head - 90°
            - spindle extension
            - automatic tool changer with 40 places
            - table enlargement supporter - width up to 3000 mm
            - internal coolant supply at the spindle
            - compressed air 6 bar, 500 l/min
            - documentation
          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine FPT Terus


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03143 · Travelling column milling machine

          FPT - Terus - - 2015 - Siemens 840D

          Technical details
          x-travel 2500 mm︱y-travel 2000 mm︱z-travel 2000 mm︱control Siemens 840D ︱Size of table plate 1500x2000 mm︱table load 12 t︱solution 0.0005 Grad︱Rotating speeds 5 U/min︱spindle drive ︱output 34 kW︱Speed range - up to 400-5000 U/min︱max. torque 830 Nm︱tool magazin: 24 Plätze ︱taper ISO 50 DIN 69871 ︱max. diameter 125-230 mm︱tool length - max. 400 mm︱Payload 20 kg︱coolant ︱Capacity 28 l/min︱0 4 bar︱
          Equipment/ Accessories: - only 8821 working hours The structure of the TERUS cross moving-column machining centre consists of an electro-welded steel construction. The table bed, which can be moved in the longitudinal direction, and the column bed, which can be moved in the cross direction, consist of an electro-welded steel construction. The carriage is made of electro-welded steel to ensure maximum rigidity. The turntable or pallet carrier substructure is made of Meehanite cast GB/300. X, Y and Z axes on hardened and ground linear guides. The turntable or pallet carrier rests on a hydrostatic bearing ring. Machine diagnostic system and diagnostic software system. Other important details are: - max. permissible tilting moment: 87000 Nm - max. working torque: 45000 Nm - Semi-automatic accessory changing system: 34 kW - Shopmill option - infinitely positionable universal head: automatic, double pivoting - Tapping without compensating chuck for mechanical milling heads - Static RTCP in space - Static RTCP for rotary variable tables: This software allows the programming of machining in any position that can be reached by the milling head, without zero offset. The RTCP-TR is also useful for editing with inclined, spherical tool, with continuous head and table movements in all directions. - Chain tool magazine 40 places ISO50 mounted on the floor - Arm for changing the tool in horizontal spindle position - With internal compressed air supply as an alternative to coolant - Wireless probe: Renishaw RMP 60 - Teleservice (remote diagnosis)
            x-travel 2500 mm
            y-travel 2000 mm
            z-travel 2000 mm
            control Siemens 840D
            Size of table plate 1500x2000 mm
            table load 12 t
            solution 0.0005 Grad
            Rotating speeds 5 U/min
            output 34 kW
            Speed range - up to 400-5000 U/min
            max. torque 830 Nm
            tool magazin: 24 Plätze
            taper ISO 50 DIN 69871
            max. diameter 125-230 mm
            tool length - max. 400 mm
            Payload 20 kg
            Capacity 28 l/min
            0 4 bar
            Description :
            Equipment/ Accessories:

            - only 8821 working hours

            The structure of the TERUS cross moving-column machining centre consists of an
            electro-welded steel construction.
            The table bed, which can be moved in the longitudinal direction, and the column
            bed, which can be moved in the cross direction, consist of an electro-welded
            steel construction.
            The carriage is made of electro-welded steel to ensure maximum rigidity.
            The turntable or pallet carrier substructure is made of Meehanite cast GB/300.
            X, Y and Z axes on hardened and ground linear guides.
            The turntable or pallet carrier rests on a hydrostatic bearing ring.
            Machine diagnostic system and diagnostic software system.

            Other important details are:
            - max. permissible tilting moment: 87000 Nm
            - max. working torque: 45000 Nm
            - Semi-automatic accessory changing system: 34 kW
            - Shopmill option
            - infinitely positionable universal head: automatic, double pivoting
            - Tapping without compensating chuck for mechanical milling heads
            - Static RTCP in space
            - Static RTCP for rotary variable tables: This software allows the programming
            of machining in any position that can be reached by the milling head,
            without zero offset. The RTCP-TR is also useful for editing with inclined,
            spherical tool, with continuous head and table movements in all directions.
            - Chain tool magazine 40 places ISO50 mounted on the floor
            - Arm for changing the tool in horizontal spindle position
            - With internal compressed air supply as an alternative to coolant
            - Wireless probe: Renishaw RMP 60
            - Teleservice (remote diagnosis)
          Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used  Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02478 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱
          Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
            Description :
            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 r.p.m.

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 r.p.m.
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min

            - 13 milling cutters included -
          36.000 €
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine KAPP KX 300P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03153 · Gear Grinding Machine

          KAPP - KX 300P - - 2004 -

          Technical details
          max. wheel diameter 300 mm︱gear width 250 mm︱max. module 5/10 ︱x-axis 270 mm︱y-axis 250 mm︱z-axis 320 mm︱max. feed 10000 mm/min︱max. workpiece dia. 300 ︱gear hobbing width -max. 250 mm︱max.helical angle +35/-35 °︱total power requirement kW︱weight of the machine ca. 14800 t︱dimensions of the machine ca. 5290 x 4280 x 2620 m︱
            max. wheel diameter 300 mm
            gear width 250 mm
            max. module 5/10
            x-axis 270 mm
            y-axis 250 mm
            z-axis 320 mm
            max. feed 10000 mm/min
            max. workpiece dia. 300
            gear hobbing width -max. 250 mm
            max.helical angle +35/-35 °
            weight of the machine ca. 14800 t
            dimensions of the machine ca. 5290 x 4280 x 2620 m
            Description :

          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical PFAUTER PE 750 CNC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03185 · Gear Hobbing Machine - Vertical

          PFAUTER - PE 750 CNC - - 2000 - Sinumerik

          Technical details
          max. wheel diameter 750 mm︱gear width 500 mm︱max. module 14 (18) ︱min. module 1 ︱Control Sinumerik ︱axial slide travel 500 mm︱distance cutter - workpiece axis - min./max. 50 / 500 mm︱hob dia. - max. 240 mm︱hob length - max. 350 mm︱milling arbor taper HSK-B 100 ︱milling head -swivable +30 /-40 °︱shifting max. 300 mm︱total power requirement 22 kW︱weight of the machine ca. 13 t︱
          - Retrofit version The machine was delivered from Pfauter in 2000 as generally reconditioned. - for gear cutting of cylindrical gears and worm gears as well as all other rolling profiles and shapes regularly occurring on the cylindrical workpiece circumference.
            max. wheel diameter 750 mm
            gear width 500 mm
            max. module 14 (18)
            min. module 1
            Control Sinumerik
            axial slide travel 500 mm
            distance cutter - workpiece axis. 50 / 500 mm
            hob dia. - max. 240 mm
            hob length - max. 350 mm
            milling arbor taper HSK-B 100
            milling head -swivable +30 /-40 °
            shifting max. 300 mm
            total power requirement 22 kW
            weight of the machine ca. 13 t
            Description :
            - Retrofit version
            The machine was delivered from Pfauter in 2000 as generally reconditioned.
            - for gear cutting of cylindrical gears and worm gears as well as all other
            rolling profiles and shapes regularly occurring on the cylindrical workpiece
            circumference.
          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine LORENZ SN 4


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03188 · Gear Shaping Machine

          LORENZ - SN 4 - - 1988 -

          Technical details
          max. wheel diameter 180 mm︱gear width 60 mm︱max. module 4 ︱dia. of shaper cutter 100 mm︱stroke range 236-630 Hübe/min︱total power requirement 10 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,4 x 1,15 x 2,4 m︱
          gear shaping machine for external and internal gears Equipment/ Accessories: - hydrostatic spindle bearing - increased height 75 mm - pallet with accessories (change gears,connecting road) - documentation
            max. wheel diameter 180 mm
            gear width 60 mm
            max. module 4
            dia. of shaper cutter 100 mm
            stroke range 236-630 Hübe/min
            total power requirement 10 kW
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2,4 x 1,15 x 2,4 m
            Description :
            gear shaping machine for external and internal gears

            Equipment/ Accessories:
            - hydrostatic spindle bearing
            - increased height 75 mm
            - pallet with accessories (change gears,connecting road)
            - documentation
          Datasheet
          Request / Contact

          Gear Testing Machine

          used  Gear Testing Machine OERLIKON-KLINGELNBERG R30


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03104 · Gear Testing Machine

          OERLIKON-KLINGELNBERG - R30 - - 2007 -

          Technical details
          max. wheel diameter 400 mm︱gear width - mm︱max. module - ︱workpiece dia. 36-300/400 mm︱axis distance 135-290 mm︱spindle turning speed - stepless 3000 1/min︱dist. between centers 100-550 mm︱Control ︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. 2000x3055x2788 mm︱
          Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)
            max. wheel diameter 400 mm
            gear width - mm
            max. module -
            workpiece dia. 36-300/400 mm
            axis distance 135-290 mm
            spindle turning speed - stepless 3000 1/min
            dist. between centers 100-550 mm
            weight of the machine ca. 4000 kg
            dimensions of the machine ca. 2000x3055x2788 mm
            Description :
            Test method:
            - Single flank rolling test
            - Double flank rolling test
            - Structure-borne noise test
            - Heli testing in two-flank contact.

            Features:
            - Use of up to 6 test slides
            - Highest testing accuracy and repeatability
            - Machine table with workpiece drive
            - Swiveling pneumatic unit
            - Spray oil lubrication (type: Vogel)
            - Oil mist extraction (type: Elbaron)
          Datasheet
          Request / Contact
          used  Gear Testing Machine HÖFLER EMZ 2002 / 2602


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02212 · Gear Testing Machine

          HÖFLER - EMZ 2002 / 2602 - - 1991 -

          Technical details
          max. wheel diameter 20 - 2650 mm︱gear width - mm︱max. module 32 ︱distance between centres 1850 ︱workpiece weight max. 10.000 kg︱table diameter 1100 mm︱
          Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)
            max. wheel diameter 20 - 2650 mm
            gear width - mm
            max. module 32
            distance between centres 1850
            workpiece weight max. 10.000 kg
            table diameter 1100 mm
            Description :
            Machine can be inspected under power.
            Setting-up and installation at the customers' is possible against extra charges.

            Equipment / Accessories:
            - clamping table diameter 1100 mm
            - steady rest
            - clamping devices
            - carriers
            - levelling shoes
            - hardware updated to Windows 7
            - gears / straight and helical
            - internal and external gears
            - measuring of tool cutters
            (grinding wheels, shaving cutters, milling cutters)
          Datasheet
          Request / Contact

          Spiral Bevel Gear Cutting Machine

          used  Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03108 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0/60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 1/min︱total power requirement 100 kW︱weight of the machine ca. 16700 kg︱dimensions of the machine ca. 5200x2300x2400 mm︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0/60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 1/min
            total power requirement 100 kW
            weight of the machine ca. 16700 kg
            dimensions of the machine ca. 5200x2300x2400 mm
            Description :

          Datasheet
          Request / Contact
          used  Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02824 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 1999 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱Control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0 / 60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 U/min︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m︱
          Euipment/ Accessories: - documentation
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            Control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0 / 60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 U/min
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m
            Description :
            Euipment/ Accessories:

            - documentation
          Datasheet
          Request / Contact

          Center Grinding Machine

          used  Center Grinding Machine HENNINGER ZS 150


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03186 · Center Grinding Machine

          HENNINGER - ZS 150 - - 1980 -

          Technical details
          centre distance 1450 mm︱clamping range 8-150 mm︱total power requirement kW︱weight of the machine ca. 1.000 kg︱dimensions of the machine ca. m︱
          control panel Dressing device
            centre distance 1450 mm
            clamping range 8-150 mm
            weight of the machine ca. 1.000 kg
            Description :
            control panel
            Dressing device
          Datasheet
          Request / Contact

          Slideway Grinding Machine

          used  Slideway Grinding Machine WEMA-ASCHERSLEBEN SZ 20-12-06


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03029 · Slideway Grinding Machine

          WEMA-ASCHERSLEBEN - SZ 20-12-06 - - 1986 2015 -

          Technical details
          grinding length 6000 mm︱grinding width 2000 mm︱workpiece height 1250 mm︱table surface area 6500 x 2000 mm︱table load with evenly distributed load 5000 kg/m︱distance between columns 2250 mm︱Passage height 1200 mm︱height of the table top edge over the floor ca. 955 mm︱
          The machine was reconditioned in 2015 and equipped with new hydraulics, new control cabinet and new electrics. Equipment / Accessories: - 8 table flutes 26H12 mm, distance 250 mm - dressing device - new hydraulics - many accessories - documentation
            grinding length 6000 mm
            grinding width 2000 mm
            workpiece height 1250 mm
            table surface area 6500 x 2000 mm
            table load with evenly distribut. 5000 kg/m
            distance between columns 2250 mm
            Passage height 1200 mm
            height of the table top edge ove. ca. 955 mm
            Description :
            The machine was reconditioned in 2015 and equipped with new hydraulics,
            new control cabinet and new electrics.

            Equipment / Accessories:
            - 8 table flutes 26H12 mm, distance 250 mm
            - dressing device
            - new hydraulics
            - many accessories
            - documentation
          Datasheet
          Request / Contact

          Keyseating Machine

          used  Keyseating Machine FRÖMAG RAPIDA CNCE70-2-600 PC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03176 · Keyseating Machine

          FRÖMAG - RAPIDA CNCE70-2-600 PC - - 2005 - Frömag Commander EL 30

          Technical details
          groove width 70 mm︱drawing length 600 mm︱working speed 0-38 m/min︱Control Frömag Commander EL 30 ︱total power requirement 22,6 kW︱dimensions of the machine ca. 2.5 x 2,6 x 1,7 m︱
          Equipment / Accessories: - dividing head TA 400 AD - various cabinets with accessories - documentation
            groove width 70 mm
            drawing length 600 mm
            working speed 0-38 m/min
            Control Frömag Commander EL 30
            total power requirement 22,6 kW
            dimensions of the machine ca. 2.5 x 2,6 x 1,7 m
            Description :
            Equipment / Accessories:
            - dividing head TA 400 AD
            - various cabinets with accessories
            - documentation


          Datasheet
          Request / Contact

          try-out press

          used  try-out press SWA Hydraulicky lis 250


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03013 · try-out press

          SWA - Hydraulicky lis 250 - - 1998 -

          Technical details
          pressure 250 t︱distance between columns 3500 mm︱stroke 1180 mm︱table surface area 3500 x 1600 mm︱total power requirement 30 kW︱weight of the machine ca. 36 t︱dimensions of the machine ca. 4,8 x 3,0 x 5,5 m︱
          equipent / acessories: - clamping table with support
            pressure 250 t
            distance between columns 3500 mm
            stroke 1180 mm
            table surface area 3500 x 1600 mm
            total power requirement 30 kW
            weight of the machine ca. 36 t
            dimensions of the machine ca. 4,8 x 3,0 x 5,5 m
            Description :
            equipent / acessories:
            - clamping table with support
          54.000 €
          Datasheet
          Request / Contact

          Laser Cutting Machine

          used  Laser Cutting Machine SATO Satronik HDL-5500


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03179 · Laser Cutting Machine

          SATO - Satronik HDL-5500 - - 2012 - Bahnsteuerung CNC 3010

          Technical details
          working length 8000 mm︱working width 3000 mm︱Control Bahnsteuerung CNC 3010 ︱material thickness 0,5 - 15 mm mm︱laser capacity 4 kW︱plunge thickness 15 mm︱
          material thickness for steel 0.5-15 mm material thickness at corrosion best. steel 0.5-12 mm Equipment/Accessories: - laser cooling thermotec Laser-Cooler LJ - with interchangeable table - documentation
            working length 8000 mm
            working width 3000 mm
            Control Bahnsteuerung CNC 3010
            material thickness 0,5 - 15 mm mm
            laser capacity 4 kW
            plunge thickness 15 mm
            Description :
            material thickness for steel 0.5-15 mm
            material thickness at corrosion best. steel 0.5-12 mm

            Equipment/Accessories:
            - laser cooling thermotec Laser-Cooler LJ
            - with interchangeable table
            - documentation

          Datasheet
          Request / Contact

          Plasma cutter

          used  Plasma cutter SATO Satronik HDS-8000


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03180 · Plasma cutter

          SATO - Satronik HDS-8000 - - 2012 - Bahnsteuerung CNC 3010

          Technical details
          working length 15000 mm︱working width 5600 mm︱Control Bahnsteuerung CNC 3010 ︱material thickness 2 - 40 mm︱plunge thickness 40 mm︱capacity 1,5 kVA︱
          Equipment/Accessories: - HiFocus Plasma - dust filter Donaldson Torrit - heat recovery REheat 3500 - suction table with chain conveyor Oxytrac 60150 HC - documentation
            working length 15000 mm
            working width 5600 mm
            Control Bahnsteuerung CNC 3010
            material thickness 2 - 40 mm
            plunge thickness 40 mm
            capacity 1,5 kVA
            Description :
            Equipment/Accessories:
            - HiFocus Plasma
            - dust filter Donaldson Torrit
            - heat recovery REheat 3500
            - suction table with chain conveyor Oxytrac 60150 HC
            - documentation
          Datasheet
          Request / Contact

          Thermal cutting machine

          used  Thermal cutting machine SATO Satronik HDS-8000


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03181 · Thermal cutting machine

          SATO - Satronik HDS-8000 - - 2012 - Bahnsteuerung CNC 3010

          Technical details
          working length 15000 mm︱working width 5600 mm︱Control Bahnsteuerung CNC 3010 ︱material thickness 5 - 300 mm︱capacity 1,5 kVA︱plunge thickness 130 mm︱
          chamfer: V: 10-60° K: bis 45° Y: bis 50° Equipment/Accessories: - Dust filter Donaldson Torrit - Heat recovery REheat 3500 - Suction table with chain conveyor Oxytrac 60150 HC - Documentation
            working length 15000 mm
            working width 5600 mm
            Control Bahnsteuerung CNC 3010
            material thickness 5 - 300 mm
            capacity 1,5 kVA
            plunge thickness 130 mm
            Description :
            chamfer: V: 10-60°
            K: bis 45°
            Y: bis 50°

            Equipment/Accessories:
            - Dust filter Donaldson Torrit
            - Heat recovery REheat 3500
            - Suction table with chain conveyor Oxytrac 60150 HC
            - Documentation
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Profilo del commerciante: Leyendecker & Hollmann GmbH
          Werkzeugmaschinen - Macchine utensili

          Contatta Trader



            Leyendecker & Hollmann GmbH
          Werkzeugmaschinen - Macchine utensili

           Giesenheide 18
            40724 - Hilden
            Germania
            + 49 (2103) 28097-0 "> + 49 (2103) 28097-0
            + 49 (2103) 28097-99
            info@LHmachine.com
            www.LHmachine.com

          Profilo di Trader

          LEYENDECKER & HOLLMANN - SPECIALISTI PER MACCHINE UTENSILI USATE DAL 1997

          Chi siamo

          Siamo un'azienda operante a livello internazionale, che si occupa dell'acquisto e della vendita di macchine utensili usate. La nostra azienda è stata fondata in 1997 dal laureato Frank Hollmann.

           

          Acquista

          Compriamo permanentemente macchine utensili moderne, ma anche ben mantenute, di tutti i tipi. In particolare, ci interessa ingranaggi di macchinari pesanti. Compriamo macchine singole e attrezzature di fabbrica complete. Poiché disponiamo di propri tecnici e di un magazzino con capacità della gru 50 tonnellate, possiamo sempre agire con breve preavviso. Garantiamo una perfetta esecuzione. Ovviamente paghiamo sempre le macchine per intero prima del caricamento.

           

          Saldi

          Nel nostro magazzino teniamo permanentemente in mano ca. 80 macchine utensili ben gestite per te. Dopo un preavviso, siete invitati a ispezionare le macchine sotto tensione.
          Se non trovi la macchina che stai cercando sul nostro sito, faccelo sapere; cercheremo di ottenere la macchina per te.

          Siamo membri del Fachverband FDM tedesco e siamo collegati con numerosi colleghi in tutta Europa tramite database, il che ci consente di accedere a molte altre macchine utensili usate.

           

          Il nostro scopo

          Il nostro obiettivo è una cooperazione fiduciosa a lungo termine con i nostri fornitori e i nostri clienti.

          CONTATTA LEYENDECKER & HOLLMANN GMBH

          Konrad-Zuse-Str. 5
          40789 Monheim sul Reno
          Germania
          Tel (+ 49) 2173 22 550

          Lu - Gi 8:00 - 17:00 Uhr

          Fr 8: 00 - 14: 00




          Leyendecker  &  Hollmann GmbH Werkzeugmaschinen - Machine Tools  40724 - Hilden Giesenheide 18 Deutschland
          Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools

          Giesenheide 18



          Contact Trader


            Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools
           Giesenheide 18
            40724 - Hilden
            Deutschland
            +49 (2103) 28097-0
            +49 (2103) 28097-99
            info@LHmachine.com
            www.LHmachine.com
            Contact person:

           




          Machine category


          Aufspannwinkel · Aufspannwürfel · Bearbeitungszentrum - Horizontal · Brennschneidemaschine · Fahrständerfräsmaschine · Führungsbahnschleifmaschine · Karusselldrehmaschine - Doppelständer · Kegelradfräsmaschine-Bogenverzahnung · Laserschneidmaschine · Nutenziehmaschine · Plasmaschneider · Plattenbohrwerk - Traghülse · Portalfräsmaschine verfahrbar · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Vertikaldrehmaschine · Vertikales Bearbeitungszentrum · Werkzeugprobierpresse · Wälzfräser · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zentrumschleifmaschine · Zweiständer - Karusselldrehmaschine ·