Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          MS Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe CONTUR SJ-520


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28231 · Center Lathe

          CONTUR - SJ-520 - - -

          Technical details
          WORKING RANGE TURNING / ︱- swing diameter (max) 520 mm︱- turning diameter (max) 260 mm︱- worpiece length max. 1500 mm︱MAIN SPINDLE ︱- spindle bore diameter 78 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 78 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱- pitch of spindle 6 mm︱TAILSTOCK ︱- sleeve diameter 68 mm︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
            WORKING RANGE TURNING /
            - swing diameter (max) 520 mm
            - turning diameter (max) 260 mm
            - worpiece length max. 1500 mm
            - spindle bore diameter 78 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 78 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            - pitch of spindle 6 mm
            - sleeve diameter 68 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-760


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28885 · Center Lathe

          CONTUR - SJ-760 - - -

          Technical details
          turning diameter over bed 760 mm︱turning diameter over slide rest 540 mm︱turning length / mm︱ / 760 mm︱ 540 mm︱ 115 mm︱ 10 /min︱ 1000 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 760 mm
            turning diameter over slide rest 540 mm
            turning length / mm
            /
            760 mm
            540 mm
            115 mm
            10 /min
            1000 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-660


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28884 · Center Lathe

          CONTUR - SJ-660 - - -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 438 mm︱turning length / mm︱ 660 mm︱ 438 mm︱ 85 mm︱ 15 /min︱ 1500 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 660 mm
            turning diameter over slide rest 438 mm
            turning length / mm
            660 mm
            438 mm
            85 mm
            15 /min
            1500 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-430


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28229 · Center Lathe

          CONTUR - SJ-430 - - -

          Technical details
          turning diameter over bed 430 mm︱turning diameter over slide rest 215 mm︱turning length 760 mm︱ 430 mm︱ 215 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱ 12 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 430 mm
            turning diameter over slide rest 215 mm
            turning length 760 mm
            430 mm
            215 mm
            58 mm
            20 /min
            2000 /min
            12
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-470


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28230 · Center Lathe

          CONTUR - SJ-470 - - -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 470 mm︱- turning diameter (max) 235 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 690 mm︱MAIN SPINDLE ︱- spindle bore diameter 58 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 58 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱TAILSTOCK ︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
          << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws
            - swing diameter (max) 470 mm
            - turning diameter (max) 235 mm
            - worpiece length max. 1000 mm
            - swing in gap 690 mm
            - spindle bore diameter 58 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 58 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            Description :
            << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>>
            The machine is available with peak widths from 760mm to 2000mm.
            This offer is a storage machine at a promotional price
            (Original price incl. These options: 28962.- )

            We will send you a non-binding offer with your desired specifications.
            -> Description as well as standard and special equipment can be found in the PDF file.

            This storage machine is equipped as follows:
            Including the following standard accessories, u. a .:
            - 3-way precision spindle with SKF (FAG) bearings
            - Spindle brake mechanically
            - Complete electrical equipment
            - Coolant device with rear splash guard
            and splash guard on the slide
            - Food protection
            - Shift rod with 3 adjustable cams
            - Solid grain tip
            - Covered tension spindle
            - Set of machine mounting plates
            - Machine lamp 24 V
            - Operating instructions with test report
            - CE conformity declaration

            Incl. Special accessories, u. a .:
            Article no. 5200 B
            Steel holder head B, type Multifix
            (without tool holder)

            Article no. 6405 DA3A-470-1000
            Digital Position Indicator ARBAH (Made in EU) 1
            for SJ-470 / 1000S, including counter, 3 scales,
            Stands, covers and mounting

            Article no. 5300 3544-250-6
            3 jaw lathe chucks BISON, steel body Ø 250 mm,
            Camlock D-6, concentric clamping, bore Ø 76 mm
            each with a set of one-piece turning and drilling jaws
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled MAWITEC TURNSTAR II


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-29616 · Lathe - cycle-controlled

          MAWITEC - TURNSTAR II - - 1998 - HEIDENHAIN MANUAL PLUS

          Technical details
          turning diameter 210 mm︱turning length 1000 mm︱control HEIDENHAIN MANUAL PLUS ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 410 mm︱- turning diameter (max) 210 mm︱- bar diameter (max) 42 mm︱- worpiece length max. 1000 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 3400 /min︱- number of gears 2 ︱TAILSTOCK ︱- sleeve stroke 190 mm︱- sleeve diameter 55 mm︱- taper: MK 4 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2400 mm︱- space requirements -front/back- 1600 mm︱
            turning diameter 210 mm
            turning length 1000 mm
            control HEIDENHAIN MANUAL PLUS
            - swing diameter (max) 410 mm
            - turning diameter (max) 210 mm
            - bar diameter (max) 42 mm
            - worpiece length max. 1000 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 3400 /min
            - number of gears 2
            - sleeve stroke 190 mm
            - sleeve diameter 55 mm
            - space requirements -left/right. 2400 mm
            - space requirements -front/back. 1600 mm
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled CONTUR DIALOG H-66


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8360 · Lathe - cycle-controlled

          CONTUR - DIALOG H-66 - - - SIEMENS 840 D + SHOPTURN

          Technical details
          turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN 660 mm︱ 400 mm︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 18.8 kW︱ 21000 Nm︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱
            turning diameter 660 mm
            turning length / mm
            control SIEMENS 840 D + SHOPTURN
            660 mm
            400 mm
            105 mm
            2 /min
            2500 /min
            2
            18.8 kW
            21000 Nm
            5 mm/min
            3200 mm/min
            5 mm/min
            3200 mm/min
            8000 mm/min
            8000 mm/min
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38274 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2005 -

          Technical details
          turning diameter over bed / mm︱spindle passage 32 mm︱turning length / mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- spdl. indexing device: yes ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 3 ︱WORKING RANGE TURNING ︱- bar diameter (max) 32 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 7000 /min︱- drive power 5.5 kW︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (max) 7000 /min︱
            turning diameter over bed / mm
            spindle passage 32 mm
            turning length / mm
            - number of spindles 2
            - number of turrets 2
            - number of c-axes 2
            - number of y-axes 3
            - bar diameter (max) 32 mm
            - spindle revolutions (max) 7000 /min
            - drive power 5.5 kW
            - spindle revolutions (max) 7000 /min
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 36


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38209 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 36 - - 2002 -

          Technical details
          turning diameter over bed / mm︱spindle passage 36 mm︱turning length / mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 2 ︱WORKING RANGE TURNING ︱- bar diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6300 /min︱- drive power S6 40% 10.7 kW︱COUNTER SPINDLE ︱- spindle revolutions (max) 6300 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
            turning diameter over bed / mm
            spindle passage 36 mm
            turning length / mm
            - number of spindles 2
            - number of turrets 1
            - number of c-axes 2
            - number of y-axes 2
            - bar diameter (max) 36 mm
            - spindle revolutions (min) 6300 /min
            - drive power S6 40% 10.7 kW
            - spindle revolutions (max) 6300 /min
            - mains voltage 400 V
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 28


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38259 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 28 - - 1999 -

          Technical details
          turning diameter over bed / mm︱spindle passage 28 mm︱turning length 3000 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 28 mm︱- bar diameter (max) 28 mm︱- worpiece length max. 3000 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2600 mm︱- space requirements -front/back- 2400 mm︱- total height 1700 mm︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱- - bar diameter (max) 28 mm︱
            turning diameter over bed / mm
            spindle passage 28 mm
            turning length 3000 mm
            - number of turrets 2
            - turning diameter (max) 28 mm
            - bar diameter (max) 28 mm
            - worpiece length max. 3000 mm
            - space requirements -left/right. 2600 mm
            - space requirements -front/back. 2400 mm
            - total height 1700 mm
            - - bar length (max) 3000 mm
            - - bar diameter (max) 28 mm
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column CKD BLANSKO SKJ 32/63


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-37932 · Vertical Turret Lathe - Single Column

          CKD BLANSKO - SKJ 32/63 - - -

          Technical details
          faceplate diameter 3200 mm︱swing diameter 6300 mm︱turning height / mm︱ 6300 mm︱ 2500 mm︱ 50000 kg︱ 0.8 /min︱ 80 /min︱ 92 kW︱ 130000 Nm︱ 3200 mm︱ 1900 mm︱ 1600 mm︱ 2200 mm︱
          This carousel lathe is completely overhauled, only the basic elements were used, everything else is NEW. The machine is in the state like a NEW machine
            faceplate diameter 3200 mm
            swing diameter 6300 mm
            turning height / mm
            6300 mm
            2500 mm
            50000 kg
            0.8 /min
            80 /min
            92 kW
            130000 Nm
            3200 mm
            1900 mm
            1600 mm
            2200 mm
            Description :
            This carousel lathe is completely overhauled, only the basic elements were
            used, everything else is NEW.
            The machine is in the state like a NEW machine
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal TOS KURIM FSQ 100


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39191 · Machining Center - Universal

          TOS KURIM - FSQ 100 - - 2001 - HEIDENHAIN TNC 426

          Technical details
          x travel 1600 mm︱y travel 1000 mm︱z travel 780 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- X-axis travel 1600 mm︱- Y-axis travel 1000 mm︱- Z-axis travel 780 mm︱TABLE ︱- table surface (left-right) 1000 mm︱- table surface (front-back) 1000 mm︱- workpiece load (max) 6000 kg︱- rotation axis: C ︱- - positioning/indexing 0.001 °︱MILLING SPINDLE / HEAD ︱- spindle type: tilting head ︱- - positioning/indexing 2.5 °︱- - positioning/indexing 2.5 °︱- spindle revolutions (max) 2500 /min︱
          The machine is in very good condition and available immediately.
            x travel 1600 mm
            y travel 1000 mm
            z travel 780 mm
            - number of processing axes (exc. 5
            - X-axis travel 1600 mm
            - Y-axis travel 1000 mm
            - Z-axis travel 780 mm
            - table surface (left-right) 1000 mm
            - table surface (front-back) 1000 mm
            - workpiece load (max) 6000 kg
            - - positioning/indexing 0.001 °
            - - positioning/indexing 2.5 °
            - - positioning/indexing 2.5 °
            - spindle revolutions (max) 2500 /min
            Description :
            The machine is in very good condition and available immediately.
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical DMG DMC 1035 V ECO


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40767 · Machining Center - Vertical

          DMG - DMC 1035 V ECO - - 2012 - HEIDENHAIN TNCi 530

          Technical details
          x travel 1035 mm︱y travel 510 mm︱z travel 560 mm︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- .. among of them simultaneous CNC axes 3 ︱- X-axis travel 1035 mm︱- Y-axis travel 510 mm︱- Z-axis travel 560 mm︱TABLE ︱- table surface (left-right) 1200 mm︱- table surface (front-back) 560 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 10000 /min︱- tool fixture: ISO SK 40 ︱- drive power 13 kW︱AXIS DRIVES ︱- rapid traverse 30000 mm/min︱TOOL MAGAZINE ︱- number of positions 30
          no conveyor
            x travel 1035 mm
            y travel 510 mm
            z travel 560 mm
            - number of processing axes (exc. 3
            - .. among of them simultaneous . 3
            - X-axis travel 1035 mm
            - Y-axis travel 510 mm
            - Z-axis travel 560 mm
            - table surface (left-right) 1200 mm
            - table surface (front-back) 560 mm
            - spindle revolutions (max) 10000 /min
            - drive power 13 kW
            - rapid traverse 30000 mm/min
            - number of positions 30
            Description :
            no conveyor
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MORI SEIKI SV 500B/40


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-18 · Machining Center - Vertical

          MORI SEIKI - SV 500B/40 - - 1998 - FANUC MSC 502

          Technical details
          x-travel 1000 mm︱y-travel 510 mm︱z-travel 510 mm︱Control FANUC MSC 502 ︱turning speeds 20000 U/min︱total power requirement kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
          The machine is in very good condition and can be requested under Strom can be visited. No cooling through the center of the spindle IKZ. Accessories included in delivery: - chip conveyor - 40 tool holders - NIKKEN 4-axis - 1 vice - Toolseter
            x-travel 1000 mm
            y-travel 510 mm
            z-travel 510 mm
            Control FANUC MSC 502
            turning speeds 20000 U/min
            weight of the machine ca. 8 t
            Description :
            The machine is in very good condition and can be requested under
            Strom can be visited.
            No cooling through the center of the spindle IKZ.
            Accessories included in delivery:
            - chip conveyor
            - 40 tool holders
            - NIKKEN 4-axis
            - 1 vice
            - Toolseter
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HITACHI SEIKI VK 45 II


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-66 · Machining Center - Vertical

          HITACHI SEIKI - VK 45 II - - 1997 - Seicos 10M

          Technical details
          x-travel 980 mm︱y-travel 500 mm︱z-travel 500 mm︱Control Seicos 10M ︱table dimension - longitudinal 1120 mm︱table dimension - cross 485 mm︱tool taper BT 40 ︱spindle turning speed range 8000 U/min︱tool change unit 30 -fach︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3150 x 2830 x 2500 m︱
            x-travel 980 mm
            y-travel 500 mm
            z-travel 500 mm
            Control Seicos 10M
            table dimension - longitudinal 1120 mm
            table dimension - cross 485 mm
            tool taper BT 40
            spindle turning speed range 8000 U/min
            tool change unit 30 -fach
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3150 x 2830 x 2500 m
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center WALDRICH-COBURG MULTITEC 2500 AP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28 · Portal - Machining Center

          WALDRICH-COBURG - MULTITEC 2500 AP - - 2002 - SIEMENS 840 D

          Technical details
          x-axis 4000 mm︱y-axis 3500 mm︱z-axis 1500 mm︱Control SIEMENS 840 D ︱w-axis 1500 mm︱column daylight 2500 mm︱surface area 3000 x 2000 mm︱workpiece weight 10000 kg︱spindle turning speed range 5-6000 U/min︱transmission ratio 2 ︱power capacity - milling spindle 45 kW︱dist. cutter spindle - workpiece spindle 3500 mm︱max. torque on the spindle 1250 Nm︱tool change unit 200 -fach︱tool diameter 135 / 250 mm︱weight of tools max. 50 kg︱tool length - max. 400 mm︱tool taper ISO SK-50 ︱total power requirement kW︱
            x-axis 4000 mm
            y-axis 3500 mm
            z-axis 1500 mm
            Control SIEMENS 840 D
            w-axis 1500 mm
            column daylight 2500 mm
            surface area 3000 x 2000 mm
            workpiece weight 10000 kg
            spindle turning speed range 5-6000 U/min
            transmission ratio 2
            power capacity - milling spindle 45 kW
            dist. cutter spindle - workpiece. 3500 mm
            max. torque on the spindle 1250 Nm
            tool change unit 200 -fach
            tool diameter 135 / 250 mm
            weight of tools max. 50 kg
            tool length - max. 400 mm
            tool taper ISO SK-50
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine DONAU ALPHA


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40999 · Radial Drilling Machine

          DONAU - ALPHA - - 2006 -

          Technical details
          bore capacity in steel diameter 25 mm︱arm length / mm︱workpiece height max / mm︱WORKING RANGE -BORING- ︱- drilling capacity full bore (steel) 25 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (min) 60 /min︱- spindle revolutions (max) 3050 /min︱taper MK 3
            bore capacity in steel diameter 25 mm
            arm length / mm
            workpiece height max / mm
            - drilling capacity full bore (s. 25 mm
            - spindle revolutions (min) 60 /min
            - spindle revolutions (max) 3050 /min
            taper MK 3
            Description :

          Datasheet
          Request / Contact
          used  Radial Drilling Machine STANKO 2H55


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40280 · Radial Drilling Machine

          STANKO - 2H55 - - 1973 -

          Technical details
          bore capacity in steel diameter 55 mm︱arm length 1600 mm︱workpiece height max 1600 mm︱WORKING RANGE -BORING- ︱- drilling capacity full bore (steel) 55 mm︱- throat (max) 1600 mm︱- workpiece height (max) 1600 mm︱MILLING SPINDLE / HEAD ︱- tool fixture: MK 5 ︱- sleeve stroke 350 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2700 mm︱- space requirements -front/back- 1100 mm︱- total height 3400 mm︱- total weight approx. 4500 kg︱
            bore capacity in steel diameter 55 mm
            arm length 1600 mm
            workpiece height max 1600 mm
            - drilling capacity full bore (s. 55 mm
            - throat (max) 1600 mm
            - workpiece height (max) 1600 mm
            - sleeve stroke 350 mm
            - space requirements -left/right. 2700 mm
            - space requirements -front/back. 1100 mm
            - total height 3400 mm
            - total weight approx. 4500 kg
          Datasheet
          Request / Contact
          used  Radial Drilling Machine RABOMA 12 UH 2500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39940 · Radial Drilling Machine

          RABOMA - 12 UH 2500 - - 1964 -

          Technical details
          bore capacity in steel diameter / mm︱arm length 2500 mm︱workpiece height max mm︱-------------------------------------------------- ︱WORKING RANGE -BORING- ︱- throat (max) 2500 mm︱MILLING SPINDLE / HEAD / ︱- spindle revolutions (min) 18 /min︱- spindle revolutions (max) 1800 /min︱- spindle diameter 90 mm︱- tool fixture: MK 5 ︱- sleeve stroke 400 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 3750 mm︱- space requirements -front/back- 1200 mm︱- total height 3750 mm︱- total weight approx. 12000 kg︱
            bore capacity in steel diameter / mm
            arm length 2500 mm
            - throat (max) 2500 mm
            MILLING SPINDLE / HEAD /
            - spindle revolutions (min) 18 /min
            - spindle revolutions (max) 1800 /min
            - spindle diameter 90 mm
            - sleeve stroke 400 mm
            - space requirements -left/right. 3750 mm
            - space requirements -front/back. 1200 mm
            - total height 3750 mm
            - total weight approx. 12000 kg
          Datasheet
          Request / Contact
          used  Radial Drilling Machine LODIFLEX CASER


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-33855 · Radial Drilling Machine

          LODIFLEX CASER - - - -

          Technical details
          bore capacity in steel diameter / mm︱arm length 1000 mm︱workpiece height max / mm︱-------------------------------------------------- ︱WORKING RANGE -BORING- ︱- throat (max) 1000 mm︱- sleeve stroke 250 mm︱MILLING SPINDLE / HEAD / ︱- spindle revolutions (min) 47.5 /min︱- spindle revolutions (max) 2120 /min︱- spindle diameter 60 mm︱- tool fixture: MK 4 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2000 mm︱- space requirements -front/back- 750 mm︱- total height 2160 mm︱- total weight approx. 2500 kg︱
          Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired
            bore capacity in steel diameter / mm
            arm length 1000 mm
            workpiece height max / mm
            - throat (max) 1000 mm
            - sleeve stroke 250 mm
            MILLING SPINDLE / HEAD /
            - spindle revolutions (min) 47.5 /min
            - spindle revolutions (max) 2120 /min
            - spindle diameter 60 mm
            - space requirements -left/right. 2000 mm
            - space requirements -front/back. 750 mm
            - total height 2160 mm
            - total weight approx. 2500 kg
            Description :
            Machine is not 100% OK, and needs an overhaul.
            - Height adjustment and cross adjustment must be repaired
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal HERMLE C600U


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-91 · milling machining centers - universal

          HERMLE - C600U - - 2001 - HEIDENHAIN TNC 430

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱spindle turning speed range 16000 U/min︱control HEIDENHAIN TNC 430 ︱Number of axles 5 simultan︱table rotating 360 °︱table - swivable Grad︱table - swivable Grad︱taper ISO SK-40 ︱table diameter 280 mm︱rapid traverse 30wer m/min︱tool change unit 30 -fach︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3100 x 2400 x 2500 m︱
          his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            spindle turning speed range 16000 U/min
            control HEIDENHAIN TNC 430
            Number of axles 5 simultan
            table rotating 360 °
            taper ISO SK-40
            table diameter 280 mm
            rapid traverse 30wer m/min
            tool change unit 30 -fach
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3100 x 2400 x 2500 m
            Description :
            his HERMLE C600U is in very good condition and available immediately.

            Hours on:
            - Machine ON: 65'656h
            - Spindle ON: 28'281h

            Equipment & Description:
            - Coolant outside with 6bar 3 nozzles
            - Manual canopy
            - Electr. heat compensation
            - Electr. handwheel iTNC
            - Measuring probe HEIDENHAIN
            - Blum tool breakage control
            - Documentation / Operating instructions
            - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012
            never in use)

            Option:
            - Div. tool holders ISO SK-40, 109 pcs.

          Datasheet
          Request / Contact
          used  milling machining centers - universal MTcut UDS80H-5A


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-100 · milling machining centers - universal

          MTcut - UDS80H-5A - - - HEIDENHAIN TNC 640

          Technical details
          x-travel 800 mm︱y-travel 1010 mm︱z-travel 650 mm︱Control HEIDENHAIN TNC 640 ︱Number of axles 5-Achsen sumultan ︱power capacity - milling spindle 35 kW︱tool taper HSK-A63 ︱turning speeds 20000 U/min︱max. torque on the spindle 120 Nm︱rotary table dia. 800 mm︱c-axis 360 °︱tool change unit 96-fach ︱measuring system direktes ︱chip conveyor JA ︱coolant IKZ 50 bar︱table swivelabel +/- 120 °︱total power requirement kW︱weight of the machine ca. 19 t︱dimensions of the machine ca. m︱
          The MTcut is in very good condition as new and can be inspected under power by under power at the seller's premises. This MTcut machining centre can be used for 5-axis sumultan machining. Description MTcut UDS80-5A: - THK roller rail guides - 96-fold tool changer as standard - Y-axis with two ball screws - Kessler rotary swivel table: one direct drive for the rotary axis and two direct drives for the swivel axis (with three Siemens torque motors)
            x-travel 800 mm
            y-travel 1010 mm
            z-travel 650 mm
            Control HEIDENHAIN TNC 640
            Number of axles 5-Achsen sumultan
            power capacity - milling spindle 35 kW
            tool taper HSK-A63
            turning speeds 20000 U/min
            max. torque on the spindle 120 Nm
            rotary table dia. 800 mm
            c-axis 360 °
            tool change unit 96-fach
            measuring system direktes
            chip conveyor JA
            coolant IKZ 50 bar
            table swivelabel +/- 120 °
            weight of the machine ca. 19 t
            Description :
            The MTcut is in very good condition as new and can be inspected under power by
            under power at the seller's premises.
            This MTcut machining centre can be used for 5-axis sumultan machining.

            Description MTcut UDS80-5A:
            - THK roller rail guides
            - 96-fold tool changer as standard
            - Y-axis with two ball screws
            - Kessler rotary swivel table: one direct drive for the rotary axis and two
            direct drives for the swivel axis (with three Siemens torque motors)

          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical DMG DMU 60 monoBlock


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-103 · milling machining centers - vertical

          DMG - DMU 60 monoBlock - - 2008 - MillPlus HEIDENHAIN

          Technical details
          x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱Control MillPlus HEIDENHAIN︱table dimension - longitudinal 1000 mm︱table dimension - cross 600 mm︱tool adaptor ︱spindle turning speed range 12000 U/min︱Number of axles 4 St.︱rapid traverse 30 m/min︱tool change unit 24 -fach︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            Control MillPlus HEIDENHAIN
            table dimension - longitudinal 1000 mm
            table dimension - cross 600 mm
            spindle turning speed range 12000 U/min
            Number of axles 4 St.
            rapid traverse 30 m/min
            tool change unit 24 -fach
            Description :
            The DMU 60 monoBlock is in very good condition and immediately available.
            Accessories:
            - Measuring probe
          Datasheet
          Request / Contact
          used  milling machining centers - vertical WISSNER GAMMA 1208


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-88 · milling machining centers - vertical

          WISSNER - GAMMA 1208 - - 2002 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 1200 mm︱y-travel 800 mm︱z-travel 700 mm︱Control HEIDENHAIN iTNC 530 ︱spindle turning speed range 33000 U/min︱tool taper HSK-F40 ︱tool change unit 20 -fach︱table dimension - longitudinal 1500 mm︱table dimension - cross 900 mm︱total power requirement kW︱weight of the machine ca. 9600 t︱dimensions of the machine ca. 3,1 x 2,1 x 2,75 m︱
          The WISSNER GAMMA 1208 is in a good condition and can be inspected under power by arrangement with the seller
            x-travel 1200 mm
            y-travel 800 mm
            z-travel 700 mm
            Control HEIDENHAIN iTNC 530
            spindle turning speed range 33000 U/min
            tool taper HSK-F40
            tool change unit 20 -fach
            table dimension - longitudinal 1500 mm
            table dimension - cross 900 mm
            weight of the machine ca. 9600 t
            dimensions of the machine ca. 3,1 x 2,1 x 2,75 m
            Description :
            The WISSNER GAMMA 1208 is in a good condition and can be inspected under power
            by arrangement with the seller
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

            Profilo del commerciante: MS Maschinenhandel GmbH

          Contatta Trader



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladi
            Austria
            + 43 547221907 "> + 43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at

          Profilo di Trader

          Gruppo ProdEq - Partner dell'industria.
          Commercio all'ingrosso di macchinari per la lavorazione dei metalli.
           
          Vendiamo e compriamo:
          • macchine utensili
          • macchinari per la produzione di metallo
          • attrezzatura industriale usata
          • completare le piante
          Internazionalità:
          La nostra rete di vendita internazionale fornisce accesso ai mercati globali delle macchine usate / usate.


          Elenco dei macchinari online:
          Cerca e trova l'attrezzatura e la macchina utensile desiderate (CNC o non CNC) nella nostra directory online. Tutte le macchine in vendita sono pubblicate con informazioni complete.

          Grandi progetti - piccoli progetti:
          Realizziamo aste e liquidazioni e realizziamo le vendite delle vostre attrezzature in eccedenza. Vi preghiamo di contattarci in caso di vendite imminenti di attività in eccedenza. Commerciamo macchine singole così come impianti industriali completi.

          Competenza:
          Indipendentemente se vendi o acquisti macchine o attrezzature usate. Basare la vostra decisione di vendita sulla nostra valutazione e la vostra decisione di acquisto sulla nostra consulenza tecnica.

          Più che di seconda mano:
          Scambiamo anche un portafoglio selezionato di Nuove attrezzature, Basta chiedere a noi.


          Commercio e servizio:
          Richiedi servizi post vendita come smontaggio, revisione, trasporto, importazione ed esportazione e finanziamento.

          Equipaggiamento del macchinario:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Svizzera


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austria


          ProdEq Germany GmbH
          Weberweg 2, 42499 Hückeswagen, Germania


          Post-Venta Carreras SA
          Pol. Ind. Els Plans d'Arau, C / Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Spagna


          Guerrieri srl
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italia


          ProdEq doo Trgovina z industrijskimi stroji
          Opekarniska 4, 2327 Race, Slovenia


          Ufficio di rappresentanza ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Türkei


          Altri uffici di rappresentanza: Messico, Iran
          Per ulteriori informazioni, contattare uno degli uffici ProdEq di cui sopra.




          MS Maschinenhandel GmbH   6532 - Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Österreich
            +43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

            USt.Id.Nr.: ATU 62723057
          USt.Id.Nr.: DE 257366940 / Steuernummer: 182 / 123 / 26816
          EORI-Nr.: ATEOS1000012994




          Machine category


          Aufspannplatte · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Flachschleifmaschine · Fräsmaschine - Universal · Honmaschine - Innen - Horizontal · Hydraulische - Abkantpresse · Hydraulische - Doppelständerziehpresse · Karusselldrehmaschine - Einständer · Kompressor · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Langdrehautomat · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Plasmaschneidgerät · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Stanzautomat ·