,
Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Matthias Ehlers Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe SCHAUBLIN 135


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023152 · Center Lathe

          SCHAUBLIN - 135 - - 1967 -

          Technical details
          centre height 135 mm︱centre distance 630 mm︱turning diameter over bed 315 mm︱Turning diameter via cross slide 150 mm︱Cross-sled travel path 180 mm︱bed sled driveway 630 mm︱spindle tunring speed 45 - 3000 U/min︱spindle bore 40 mm︱spindle cone MK5 ︱Rapid traverse / feed plan 0,015 - 0,35 mm︱Rapid traverse / longitudinal feed 0,015 - 0,35 mm︱dimensions of the machine ca. 1750 x 1000 x 1700 mm︱weight of the machine ca. 1200 kg︱Rated power supply 400 Volt︱
            centre height 135 mm
            centre distance 630 mm
            turning diameter over bed 315 mm
            Turning diameter via cross slide 150 mm
            Cross-sled travel path 180 mm
            bed sled driveway 630 mm
            spindle tunring speed 45 - 3000 U/min
            spindle bore 40 mm
            spindle cone MK5
            Rapid traverse / feed plan 0,015 - 0,35 mm
            Rapid traverse / longitudinal fe. 0,015 - 0,35 mm
            dimensions of the machine ca. 1750 x 1000 x 1700 mm
            weight of the machine ca. 1200 kg
            Rated power supply 400 Volt
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe SMEC SL2000ASY


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023100 · CNC Lathe

          SMEC - SL2000ASY - - 2021 - Fanuc Oi-TF+

          Technical details
          turning diameter 395 mm︱turning length 490 mm︱control Fanuc Oi-TF+ ︱turning diameter over bed 650 mm︱turning diameter over cross slideways 540 mm︱main spindle: ︱max. turning speeds 6.000 min/-1︱drive capacity - main spindle 11/18,5 kW︱sub spindle: ︱max. turning speeds 6.0000 min/-1︱spindle bore 61 mm︱max. rod diameter 52 mm︱spindle head A2-5 ︱tool turret: ︱number of tool places 12 Pos.︱tool taper BMT 55 ︱shaft height for square tool 25 mm︱Drill shank diameter 40 mm︱travel: ︱x-axis 235 mm︱
          In our opinion, the machine is in mint condition Condition and can be viewed under power by appointment. Technical features & accessories: - Commissioning 05/2022 - c-axis - y-axis - counter spindle - Coolant system with 10 bar delivery pressure - Oil skimmer with endless belt for extraneous oil separation - Warning light with 3 colors - Workroom lighting - Bar loader interface for connecting loading magazines - Part ejector on counter spindle including cooling through the spindle - Parts catcher with collection box - Chuck blow-out device on the counter spindle - Automatic tool measurement arm - transformer - Chip conveyor, side ejection - Bar loader, Samsys Smart, 5-65 mm, bar length max: 1200 mm - Palette accessories, see picture If you are interested in financing, leasing can be discussed individually. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 395 mm
            turning length 490 mm
            control Fanuc Oi-TF+
            turning diameter over bed 650 mm
            turning diameter over cross slid. 540 mm
            max. turning speeds 6.000 min/-1
            drive capacity - main spindle 11/18,5 kW
            max. turning speeds 6.0000 min/-1
            spindle bore 61 mm
            max. rod diameter 52 mm
            spindle head A2-5
            number of tool places 12 Pos.
            tool taper BMT 55
            shaft height for square tool 25 mm
            Drill shank diameter 40 mm
            x-axis 235 mm
            Description :
            In our opinion, the machine is in mint condition
            Condition and can be viewed under power by appointment.

            Technical features & accessories:

            - Commissioning 05/2022
            - c-axis
            - y-axis
            - counter spindle
            - Coolant system with 10 bar delivery pressure
            - Oil skimmer with endless belt for extraneous oil separation
            - Warning light with 3 colors
            - Workroom lighting
            - Bar loader interface for connecting loading magazines
            - Part ejector on counter spindle including cooling through the spindle
            - Parts catcher with collection box
            - Chuck blow-out device on the counter spindle
            - Automatic tool measurement arm
            - transformer
            - Chip conveyor, side ejection
            - Bar loader, Samsys Smart, 5-65 mm, bar length max: 1200 mm
            - Palette accessories, see picture

            If you are interested in financing, leasing can be discussed individually.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe DMG GILDEMEISTER MSL 60/7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202274 · CNC Lathe

          DMG GILDEMEISTER - MSL 60/7 - - 2015 - Fanuc 31 i

          Technical details
          Axis: 7 ︱Control Fanuc 31 i ︱main spindle: ︱max. rod diameter 60 mm︱max. turning speeds 5000 min/-1︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1:
          In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar loader, usable length 5m *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            Axis: 7
            Control Fanuc 31 i
            max. rod diameter 60 mm
            max. turning speeds 5000 min/-1
            spindle motor 7,5/5,5 kW
            max. turning diameter 42 mm
            max. turning speeds 5000 min/-1
            spindle motor 3,7/2,2 kW
            max speed (Z4) 15 m/min
            max. acceleration 5 m/s2
            travel X1 / X2 / X3 60 mm
            travel X4 130 mm
            travel Z2 80 mm
            tavel Z3 80 mm
            travel Z4 340 mm
            Nominal thrust X1 / X2 / X3 / X4. 4400 N
            Description :
            In our assessment, the machine is in a very good used condition
            State and can be viewed by appointment.

            - Bar loader, usable length 5m

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  CNC Lathe NILES-SIMMONS N20/1000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024017 · CNC Lathe

          NILES-SIMMONS - N20/1000 - - 2000 - Rexroth Indramat BVT 20

          Technical details
          swing diameter 650 mm︱turning length 1000 mm︱control Rexroth Indramat BVT 20 ︱x-travel -15 / 660 mm︱y-travel -150 / 200 mm︱main spindle: 150 ︱spindle bore 92 mm︱bearing diameter 150 mm︱turning speed range - main spindle 0 - 3.800 min/-1︱tool turret: ︱number of tool places 12 Pos.︱total power requirement 70 kW︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            swing diameter 650 mm
            turning length 1000 mm
            control Rexroth Indramat BVT 20
            x-travel -15 / 660 mm
            y-travel -150 / 200 mm
            main spindle: 150
            spindle bore 92 mm
            bearing diameter 150 mm
            turning speed range - main spind. 0 - 3.800 min/-1
            number of tool places 12 Pos.
            total power requirement 70 kW
            Description :
            In our opinion, the machine is in very good used condition and can be inspected
            under power by appointment.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


          Datasheet
          Request / Contact
          used  CNC Lathe OKUMA LT 15 M


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202217 · CNC Lathe

          OKUMA - LT 15 M - - 1998 - Okuma OSP 7000 L

          Technical details
          turning diameter 550 mm︱turning length 900 mm︱control Okuma OSP 7000 L ︱turning diameter over bed 550 mm︱turning diameter over cross slideways 150 mm︱centre distance max. 1174 mm︱main spindle: ︱turning speed range - main spindle 45-4500 min/-1︱drive capacity - main spindle 15 kW︱tool turret: ︱number of tool places 2x12 Pos.︱Drill shank diameter 40 mm︱travel: ︱x-axis 230 mm︱z-axis 900 mm︱feeds: ︱rapid traverse 20x24 m/min︱weight of the machine ca. 8,2 t︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. Technical features: - Double spindle lathe - Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm - driven tools Accesories: - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 550 mm
            turning length 900 mm
            control Okuma OSP 7000 L
            turning diameter over bed 550 mm
            turning diameter over cross slid. 150 mm
            centre distance max. 1174 mm
            turning speed range - main spind. 45-4500 min/-1
            drive capacity - main spindle 15 kW
            number of tool places 2x12 Pos.
            Drill shank diameter 40 mm
            x-axis 230 mm
            z-axis 900 mm
            rapid traverse 20x24 m/min
            weight of the machine ca. 8,2 t
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            Technical features:

            - Double spindle lathe
            - Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm
            - driven tools

            Accesories:

            - chip conveyor

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe INDEX ABC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023068 · CNC Lathe

          INDEX - ABC - - 1995 - Siemens Sinumerik

          Technical details
          turning diameter 52 mm︱turning length 280 mm︱control Siemens Sinumerik ︱travel: ︱travel -x axis 90 mm︱travel -z axis 280 mm︱spindle tunring speed 5000 U/min︱ 6000 U/min︱rapid traverse 24 m/min︱total power requirement 18 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2,7 x 1,35 x 1,9 m︱
          In our opinion, the machine is in good condition and can be inspected under power by appointment. Accesories: -Chip conveyor -Bar feeder ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 52 mm
            turning length 280 mm
            control Siemens Sinumerik
            travel -x axis 90 mm
            travel -z axis 280 mm
            spindle tunring speed 5000 U/min
            6000 U/min
            rapid traverse 24 m/min
            total power requirement 18 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 2,7 x 1,35 x 1,9 m
            Description :
            In our opinion, the machine is in good condition and can be inspected under
            power by appointment.

            Accesories:
            -Chip conveyor
            -Bar feeder

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MORI SEIKI ZT 1500 Y


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024016 · CNC Turning- and Milling Center

          MORI SEIKI - ZT 1500 Y - - 2005 - Mori Seiki MSX-501

          Technical details
          swing diameter max. 250 mm︱turning length max. 120 mm︱control Mori Seiki MSX-501 ︱max. turning diameter 190 mm︱standard turning diameter 170 mm︱dist. between centers 750 mm︱max. rod diameter 52 mm︱main spindle: ︱turning speed range - main spindle 60 - 6.000 min/-1︱drive capacity - main spindle 22 / 18,5 kW︱max. torque 198 Nm︱spindle bearing diameter 95 mm︱travel: ︱x-axis 1+2: 140 mm mm︱y-axis 1: +/- 40 mm mm︱z-axis 1 / 2: 450 / 410 mm︱total power requirement 75 kW︱weight of the machine ca. 5,1 t︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - Y axis Accesories: - FMB turbo bar feeder ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            swing diameter max. 250 mm
            turning length max. 120 mm
            control Mori Seiki MSX-501
            max. turning diameter 190 mm
            standard turning diameter 170 mm
            dist. between centers 750 mm
            max. rod diameter 52 mm
            turning speed range - main spind. 60 - 6.000 min/-1
            drive capacity - main spindle 22 / 18,5 kW
            max. torque 198 Nm
            spindle bearing diameter 95 mm
            x-axis 1+2: 140 mm mm
            y-axis 1: +/- 40 mm mm
            z-axis 1 / 2: 450 / 410 mm
            total power requirement 75 kW
            weight of the machine ca. 5,1 t
            Description :
            In our opinion, the machine is in very good used condition and can be inspected
            under power by appointment.

            Technical features:
            - Y axis

            Accesories:
            - FMB turbo bar feeder

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


          Datasheet
          Request / Contact

          Crankshaft Turning Lathe

          used  Crankshaft Turning Lathe NILES N30 /3 TB-1500


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023259 · Crankshaft Turning Lathe

          NILES - N30 /3 TB-1500 - - 2011 - Siemens 840 D sl

          Technical details
          Control Siemens 840 D sl ︱max. workpiece length 800 mm︱swing diameter over slide rest 780 mm︱main spindle: ︱max. turning speeds 3000 min/-1︱spindle diameter in front bearing 180 mm︱spindle bore 92 mm︱spindle head A11 ︱tool turret: ︱tooling cassettes 2x 45 Stk.︱tool taper A11 DIN55026 ︱tool diameter 700 mm︱feeds: ︱rapid traverse 18 x 30 m/min︱weight of the machine ca. 24,0 t︱
          In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            Control Siemens 840 D sl
            max. workpiece length 800 mm
            swing diameter over slide rest 780 mm
            max. turning speeds 3000 min/-1
            spindle diameter in front bearin. 180 mm
            spindle bore 92 mm
            spindle head A11
            tooling cassettes 2x 45 Stk.
            tool taper A11 DIN55026
            tool diameter 700 mm
            rapid traverse 18 x 30 m/min
            weight of the machine ca. 24,0 t
            Description :
            In our opinion, the machines are in very good used condition
            Condition and can be viewed under power by appointment.

            Technical features:
            - Nominal length: 1500 mm

            Accesories:
            - chip conveyor
            - Felsomat loading system
            - lathe chuck
            - milling body

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


          Datasheet
          Request / Contact
          used  Crankshaft Turning Lathe NILES N20 LT


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023260 · Crankshaft Turning Lathe

          NILES - N20 LT - - 1998 - Siemens 840 D

          Technical details
          Control Siemens 840 D ︱swing diameter over slide rest 650 mm︱main spindle: ︱max. turning speeds 3800 min/-1︱spindle diameter in front bearing 150 mm︱spindle bore 92 mm︱spindle head A8 DIN55026 ︱tool turret: ︱number of tool places 2x 12 Pos.︱tool taper VDI 40 ︱weight of the machine ca. 7,0 t︱
          In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            Control Siemens 840 D
            swing diameter over slide rest 650 mm
            max. turning speeds 3800 min/-1
            spindle diameter in front bearin. 150 mm
            spindle bore 92 mm
            spindle head A8 DIN55026
            number of tool places 2x 12 Pos.
            tool taper VDI 40
            weight of the machine ca. 7,0 t
            Description :
            In our opinion, the machines are in good used condition
            Condition and can be viewed under power by appointment.

            Technical features:
            - Nominal length: 1500 mm

            Accesories:
            - chip conveyor
            - Felsomat loading system
            - lathe chuck
            - milling body

            There are 2 identical machines available.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SCHAUBLIN 125 CCN


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023065 · Lathe - cycle-controlled

          SCHAUBLIN - 125 CCN - - 1997 - Fanuc 20 T

          Technical details
          turning diameter 270 mm︱turning length 410 mm︱control Fanuc 20 T ︱centre distance 650 mm︱spindle tunring speed 30 - 5000 U/min︱auto power on hours 2700 h︱machine weight ab. 1415 kg kg︱Dimensions (L/W/H) 1700 x 1650 x 1170 mm︱
          In our opinion, the machine is in very good condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 270 mm
            turning length 410 mm
            control Fanuc 20 T
            centre distance 650 mm
            spindle tunring speed 30 - 5000 U/min
            auto power on hours 2700 h
            machine weight ab. 1415 kg kg
            Dimensions (L/W/H) 1700 x 1650 x 1170 mm
            Description :
            In our opinion, the machine is in very good condition
            and can be inspected under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***
          Datasheet
          Request / Contact

          NC Lathe

          used  NC Lathe OERLIKON-BOEHRINGER PNE 480 L


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023154 · NC Lathe

          OERLIKON-BOEHRINGER - PNE 480 L - - 1985 - Bahnsteuerung B2T

          Technical details
          turning diameter 480 mm︱turning length 1500 mm︱control Bahnsteuerung B2T ︱swing diameter over bed slide 315 mm︱dist. between centers 245 mm︱main spindle: ︱turning speed range - main spindle 14 - 3550 min/-1︱drive capacity - main spindle 34 kW︱Number of RPM ranges 4 ︱spindle bearing diameter 100 mm︱spindle bore 62 mm︱spindle head DIN 55022 Gr. 8 ︱tool turret: ︱number of tool places 12 Pos.︱Lathe tool cross-section 25 mm︱Drill shank diameter 50 mm︱tail stock: ︱tailstock quill diameter 100 mm︱quill stroke 150 mm︱tip feed speed 6000 mm/min︱
          In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 480 mm
            turning length 1500 mm
            control Bahnsteuerung B2T
            swing diameter over bed slide 315 mm
            dist. between centers 245 mm
            turning speed range - main spind. 14 - 3550 min/-1
            drive capacity - main spindle 34 kW
            Number of RPM ranges 4
            spindle bearing diameter 100 mm
            spindle bore 62 mm
            spindle head DIN 55022 Gr. 8
            number of tool places 12 Pos.
            Lathe tool cross-section 25 mm
            Drill shank diameter 50 mm
            tailstock quill diameter 100 mm
            quill stroke 150 mm
            tip feed speed 6000 mm/min
            Description :
            In our opinion, the machine is in good used condition and can be inspected
            under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe HANWHA XD26H


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024011 · Turning Automatic Lathe - swiss lathe

          HANWHA - XD26H - - 2012 - Siemens 840 D

          Technical details
          Max. turning diameter Ø 26 mm︱Max. milling diameter Ø 7 mm︱Control Siemens 840 D ︱main spindle: ︱Main spindle stroke 210 mm︱turning speeds 8.000 U/min︱
          In our opinion, the machine is in very good condition used Condition and can be viewed under power by appointment. Technical features & accessories: - Counter spindle - Bar loading magazine - chip conveyor - Marposs process monitoring system - Documentation - Various tool holders ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            Max. turning diameter Ø 26 mm
            Max. milling diameter Ø 7 mm
            Control Siemens 840 D
            Main spindle stroke 210 mm
            turning speeds 8.000 U/min
            Description :
            In our opinion, the machine is in very good condition
            used
            Condition and can be viewed under power by appointment.

            Technical features & accessories:
            - Counter spindle
            - Bar loading magazine
            - chip conveyor
            - Marposs process monitoring system
            - Documentation
            - Various tool holders

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe DMG GILDEMEISTER MSL 60-7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202261 · Turning Automatic Lathe - swiss lathe

          DMG GILDEMEISTER - MSL 60-7 - - 2008 - Fanuc

          Technical details
          Axis 7 ︱control Fanuc ︱main spindle: ︱turning diameter 60 mm︱spindle tunring speed 5000 U/min︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1:
          In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar feeder interface - chip conveyor *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            Axis 7
            control Fanuc
            turning diameter 60 mm
            spindle tunring speed 5000 U/min
            spindle motor 7,5/5,5 kW
            max. turning diameter 42 mm
            max. turning speeds 5000 min/-1
            spindle motor 3,7/2,2 kW
            max speed (Z4) 15 m/min
            max. acceleration 5 m/s2
            travel X1 / X2 / X3 60 mm
            travel X4 130 mm
            travel Z2 80 mm
            tavel Z3 80 mm
            travel Z4 340 mm
            Nominal thrust X1 / X2 / X3 / X4. 4400 N
            Description :
            In our assessment, the machine is in a very good used condition
            State and can be viewed by appointment.

            - Bar feeder interface
            - chip conveyor

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VL 7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2022033 · Vertical Turning Machine

          EMAG - VL 7 - - 2014 - Siemens 840DSL

          Technical details
          Control Siemens 840DSL ︱max. swing diameter 420 mm︱max. turning height 300 mm︱main spindle: ︱max. turning speeds 3400 min/-1︱drive capacity - main spindle 45 / 35 kW︱max. torque 775 / 600 Nm︱chucking diameter 315 / 400 mm︱tool turret: ︱number of tool places 12 Pos.︱Shank diameter 40 mm︱travel: ︱x-axis 850 mm︱z-axis 315 mm︱feeds: ︱rapid traverse (x/z) 45 / 30 m/min︱weight of the machine ca. 10,0 t︱dimensions of the machine ca. 4,2 x 1,5 x 3,5 m︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            Control Siemens 840DSL
            max. swing diameter 420 mm
            max. turning height 300 mm
            max. turning speeds 3400 min/-1
            drive capacity - main spindle 45 / 35 kW
            max. torque 775 / 600 Nm
            chucking diameter 315 / 400 mm
            number of tool places 12 Pos.
            Shank diameter 40 mm
            x-axis 850 mm
            z-axis 315 mm
            rapid traverse (x/z) 45 / 30 m/min
            weight of the machine ca. 10,0 t
            dimensions of the machine ca. 4,2 x 1,5 x 3,5 m
            Description :
            In our opinion, the machine is in very good used condition
            and can be inspected under power by appointment.

            Technical features:
            - driven tools
            - c-axis
            - Capacity for pieces diameter 30 to 160 mm : 32 [pos]
            - Capacity for pieces diameter 120 to 220 mm : 24 [pos]
            - Capacity for pieces diameter 120 to 340 mm : 16 [pos]

            The scope of delivery of the machine does not include a clamping device.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023026 · Vertical Turning Machine

          EMAG - VTC 250 DUO - - 2012 - Siemens 840 SL

          Technical details
          turning diameter 140 mm︱turning length 630 mm︱control Siemens 840 SL ︱max. swing diameter over bed 250 mm︱main spindle: ︱turning speed range - main spindle 0 - 5000 min/-1︱max. torque 256 Nm︱spindle bearing diameter 110 mm︱spindle bore 52 mm︱spindle head Gr. 6 DIN 55026 ︱chucking diameter max. 250 mm︱tool turret: ︱number of tool places 3 x 12 Pos.︱tool taper VDI 40 ︱max. tool weight 20 kg︱max. tool diameter 40 mm︱max. tool length 95 mm︱max. workpiece weight 20 kg︱max. workpiece diameter 140 mm︱travel:
          In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 140 mm
            turning length 630 mm
            control Siemens 840 SL
            max. swing diameter over bed 250 mm
            turning speed range - main spind. 0 - 5000 min/-1
            max. torque 256 Nm
            spindle bearing diameter 110 mm
            spindle bore 52 mm
            spindle head Gr. 6 DIN 55026
            chucking diameter max. 250 mm
            number of tool places 3 x 12 Pos.
            tool taper VDI 40
            max. tool weight 20 kg
            max. tool diameter 40 mm
            max. tool length 95 mm
            max. workpiece weight 20 kg
            max. workpiece diameter 140 mm
            Description :
            In our opinion, the machine is in good used condition and can be inspected
            under power by appointment.

            Technical features:
            - Siemens S120 drive systems
            - 3x turret, all places AGW, 2x of them with y - axis
            - 2x main spindle, 1x with tailstock
            - Spindles total 5 pcs.
            - Tool monitoring, Artis
            - Total electronic axes: 21 pcs.

            Accesories:
            - chip conveyor
            - Radio probe, Renishaw
            - Cooling unit
            - Infeed and outfeed conveyor
            - suction

            There are 2 identical machines available.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Vertical Turning Machine FELSOMAT FTC180


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023040 · Vertical Turning Machine

          FELSOMAT - FTC180 - - 2012 - Siemens

          Technical details
          turning diameter 320 mm︱turning height 750 mm︱Control Siemens ︱main spindle: ︱max. turning speeds 4500 min/-1︱drive capacity - main spindle 26,8 / 20,9 kW︱max. torque 256 / 200 Nm︱spindle bore 52 mm︱spindle head KK A6 (DIN 55026) ︱chucking diameter max. 315 mm︱tool turret: ︱number of tool places 8 Pos.︱tool taper Capto C5 ︱max. workpiece diameter 50 mm︱max. workpiece weight 0,5 kg︱travel: ︱x-axis 450 mm︱z-axis 300 mm︱feeds: ︱rapid traverse x 45 / z 40 m/min︱
          In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 320 mm
            turning height 750 mm
            Control Siemens
            max. turning speeds 4500 min/-1
            drive capacity - main spindle 26,8 / 20,9 kW
            max. torque 256 / 200 Nm
            spindle bore 52 mm
            spindle head KK A6 (DIN 55026)
            chucking diameter max. 315 mm
            number of tool places 8 Pos.
            tool taper Capto C5
            max. workpiece diameter 50 mm
            max. workpiece weight 0,5 kg
            x-axis 450 mm
            z-axis 300 mm
            rapid traverse x 45 / z 40 m/min
            Description :
            In our opinion, the machine is in very good condition
            condition and can be inspected under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Vertical Turning Machine DMG GILDEMEISTER CTV 160


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023155 · Vertical Turning Machine

          DMG GILDEMEISTER - CTV 160 - - 2008 - Siemens Sinumerik 840 D

          Technical details
          turning diameter 160 mm︱turning height 160 mm︱control Siemens Sinumerik 840 D ︱travel: ︱x-axis 575 mm︱y-axis +/- 90 mm︱z-axis 300 mm︱main spindle: ︱max. turning speeds 6000 min/-1︱drive capacity - main spindle 21 / 16 kW︱max. torque 176 Nm︱spindle head 140h5 ︱spindle diameter in front bearing 100 mm︱chucking diameter 160 (200) mm︱C-Axis 0,001 °︱total power requirement 40 kW︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 6,5 x 4,5 x 3 m︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. technical features - ShopTurn ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 160 mm
            turning height 160 mm
            control Siemens Sinumerik 840 D
            x-axis 575 mm
            y-axis +/- 90 mm
            z-axis 300 mm
            max. turning speeds 6000 min/-1
            drive capacity - main spindle 21 / 16 kW
            max. torque 176 Nm
            spindle head 140h5
            spindle diameter in front bearin. 100 mm
            chucking diameter 160 (200) mm
            C-Axis 0,001 °
            total power requirement 40 kW
            weight of the machine ca. 5,3 t
            dimensions of the machine ca. 6,5 x 4,5 x 3 m
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            technical features
            - ShopTurn

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DOERRIES CTE 100


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023130 · Vertical Turret Lathe - Single Column

          DOERRIES - CTE 100 - - 1979 -

          Technical details
          Year 1979 Retrofit 2013 ︱max. turning diameter 1300 mm︱table diameter 1000 mm︱workpiece height max. 1500 mm︱working lenght 1050 mm︱ 280 U/min.︱T-slots 48 x 28 ︱speeds 4,75 - 250 U/min︱rapid traverse 6000 mm/min︱
          In our opinion, the machine is in good used condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            Year 1979 Retrofit 2013
            max. turning diameter 1300 mm
            table diameter 1000 mm
            workpiece height max. 1500 mm
            working lenght 1050 mm
            280 U/min.
            T-slots 48 x 28
            speeds 4,75 - 250 U/min
            rapid traverse 6000 mm/min
            Description :
            In our opinion, the machine is in good used condition and can be inspected
            under power by appointment.

            Retrofit 2013
            Precision class: IT7

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine DECKEL LK


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023166 · Jig Boring Machine

          DECKEL - LK - - unbekannt -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱
          In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 3 identical machines available (see photos). ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 400 mm
            y-travel 250 mm
            Description :
            In our opinion, the machine is in good used condition and can be inspected
            under power by appointment.

            There are 3 identical machines available (see photos).

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as Subject
            to prior sale!***
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DMG DMU EcoMill 50


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024030 · Machining Center - Universal

          DMG - DMU EcoMill 50 - - 2015 - Siemens

          Technical details
          x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱control Siemens ︱main spindle: ︱turning speed range - main spindle 20 - 12.000 min/-1︱drive capacity - main spindle 13 / 9 kW︱max. torque 83 Nm︱tool taper SK 40 ︱rotary table: ︱surface area 630 x 500 mm︱max. table load 200 kg︱b-axis -5 / +110 °︱ 360 °︱T-slots (number x width x distance) 7 x 12 x 63 mm︱
          In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Technical features: - IKZ - Operating hours: approx. 1,900h - Spindle hours: approx. 392h Accesories: - chip conveyor ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 500 mm
            y-travel 450 mm
            z-travel 400 mm
            control Siemens
            turning speed range - main spind. 20 - 12.000 min/-1
            drive capacity - main spindle 13 / 9 kW
            max. torque 83 Nm
            tool taper SK 40
            surface area 630 x 500 mm
            max. table load 200 kg
            b-axis -5 / +110 °
            360 °
            T-slots (number x width x distan. 7 x 12 x 63 mm
            Description :
            In our opinion, the machine is in very good used condition and can be viewed
            under power by appointment.

            Technical features:
            - IKZ
            - Operating hours: approx. 1,900h
            - Spindle hours: approx. 392h


            Accesories:
            - chip conveyor

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Universal HURCO VMX 42 SRTi


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024029 · Machining Center - Universal

          HURCO - VMX 42 SRTi - - 2013 - WinMax

          Technical details
          x-travel 1060 mm︱y-travel 610 mm︱z-travel 610 mm︱b-axis +/- 90 °︱ 360 °︱control WinMax ︱main spindle: ︱tool taper SK 40 ︱spindle tunring speed 12.000 U/min︱drive capacity - main spindle 36,5 kW︱max. torque 120 Nm︱distance spindle /table 551 mm︱table: ︱table surface area 1.270 x 600 mm︱T-slots (number x width x distance) 5 x 18 x 100 mm︱max. table load 1300 kg︱integrated rotary table: ︱table diameter 600 mm︱max. table load 500 kg︱tool changer:
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - 4th axis integrated in the machine table - Motor spindle swivel head - Direct measuring system for all axes - IKZ 20 bar - Flushing system to support chip removal - Chip splash guard cabin - Cooling air can be switched by spindle - DXF software - Mechanical engineering package: Dialogue cycle groove Dialogue cycle polygon Dialogue Thread milling cycle Dialogue Tool Change Optimization Accesories: - chip conveyor - Coolant system ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 1060 mm
            y-travel 610 mm
            z-travel 610 mm
            b-axis +/- 90 °
            360 °
            control WinMax
            tool taper SK 40
            spindle tunring speed 12.000 U/min
            drive capacity - main spindle 36,5 kW
            max. torque 120 Nm
            distance spindle /table 551 mm
            table surface area 1.270 x 600 mm
            T-slots (number x width x distan. 5 x 18 x 100 mm
            max. table load 1300 kg
            table diameter 600 mm
            max. table load 500 kg
            Description :
            In our opinion, the machine is in very good used condition and can be inspected
            under power by appointment.

            Technical features:
            - 4th axis integrated in the machine table
            - Motor spindle swivel head
            - Direct measuring system for all axes
            - IKZ 20 bar
            - Flushing system to support chip removal
            - Chip splash guard cabin
            - Cooling air can be switched by spindle
            - DXF software
            - Mechanical engineering package:
            Dialogue cycle groove
            Dialogue cycle polygon
            Dialogue Thread milling cycle
            Dialogue Tool Change Optimization


            Accesories:
            - chip conveyor
            - Coolant system

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well Subject to
            prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Universal MIKRON HSM 400 U


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202236 · Machining Center - Universal

          MIKRON - HSM 400 U - - 2004 - Heidenhain iTNC 530

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱z-travel 350 mm︱Control Heidenhain iTNC 530 ︱main spindle: ︱max. turning speeds 42.000 min/-1︱drive capacity - main spindle 10 / 13 kW︱max. torque 4,25 Nm︱rotary table: ︱table diameter 156 mm︱max. table load 25 kg︱tool changer: ︱number of tool places 30 Pos.︱tool taper HSK 40 ︱max. tool diameter 80 mm︱max. tool length 210 mm︱max. tool weight 1,5 kg︱change-time chip to chip 8 sec︱change-time tool to tool 5 sec︱rotating range 360 °︱
          In our opinion, the machine is in very good condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 400 mm
            y-travel 250 mm
            z-travel 350 mm
            Control Heidenhain iTNC 530
            max. turning speeds 42.000 min/-1
            drive capacity - main spindle 10 / 13 kW
            max. torque 4,25 Nm
            table diameter 156 mm
            max. table load 25 kg
            number of tool places 30 Pos.
            tool taper HSK 40
            max. tool diameter 80 mm
            max. tool length 210 mm
            max. tool weight 1,5 kg
            change-time chip to chip 8 sec
            change-time tool to tool 5 sec
            rotating range 360 °
            Description :
            In our opinion, the machine is in very good condition
            and can be inspected under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Universal GROB BZ500


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023257 · Machining Center - Universal

          GROB - BZ500 - - 1999 - Siemens 840 D

          Technical details
          x-travel 630 mm︱y-travel 630 mm︱z-travel 500 mm︱Control Siemens 840 D ︱tool taper HSK 63 A ︱weight of the machine ca. 15,0 t︱
          In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Five-axis - Single spindle design/horizontal There are 9 identical machines available. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 630 mm
            y-travel 630 mm
            z-travel 500 mm
            Control Siemens 840 D
            tool taper HSK 63 A
            weight of the machine ca. 15,0 t
            Description :
            In our opinion, the machines are in good used condition
            Condition and can be viewed under power by appointment.

            Technical features:
            - Five-axis
            - Single spindle design/horizontal

            There are 9 identical machines available.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Universal SW-SCHWäBISCHE WERKZEUGMASCH. BA 400-2


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024014 · Machining Center - Universal

          SW-SCHWäBISCHE WERKZEUGMASCH. - BA 400-2 - - 1999 - Siemens 840D

          Technical details
          x-travel 400 mm︱y-travel 450 mm︱z-travel 400 mm︱control Siemens 840D ︱main spindle: ︱number of spindles 2 Stück︱turning speed range - main spindle 50 - 12.500 min/-1︱torque 2 x 85 Nm︱drive capacity - main spindle 2 x 25 kW︱tool changer: ︱number of tool places 2 x 30 Pos.︱tool taper HSK 63 A ︱max. tool diameter 75 mm︱max. tool length 300 mm︱max. tool weight 10 kg︱change-time chip to chip ca. 3,8 sec︱feeds: ︱feed speeds 1 - 50.000 mm/min︱total power requirement 68 kW︱weight of the machine ca. 12 t︱
            x-travel 400 mm
            y-travel 450 mm
            z-travel 400 mm
            control Siemens 840D
            number of spindles 2 Stück
            turning speed range - main spind. 50 - 12.500 min/-1
            torque 2 x 85 Nm
            drive capacity - main spindle 2 x 25 kW
            number of tool places 2 x 30 Pos.
            tool taper HSK 63 A
            max. tool diameter 75 mm
            max. tool length 300 mm
            max. tool weight 10 kg
            change-time chip to chip ca. 3,8 sec
            feed speeds 1 - 50.000 mm/min
            total power requirement 68 kW
            weight of the machine ca. 12 t
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Profilo del commerciante: Matthias Ehlers Werkzeugmaschinen

          Contatta Trader



            Matthias Ehlers Machine Tools
           Nikolaus-Otto-Strasse 19 + 21
            22946 - Trittau
            Germania
            + 49 (0) 4154 - 986 99 12 "> + 49 (0) 4154 - 986 99 12
            + 49 (0) 4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de

          Profilo di Trader




          Matthias Ehlers Werkzeugmaschinen   22946 - Trittau Nikolaus-Otto-Straße 19 + 21 Deutschland
          Matthias Ehlers Werkzeugmaschinen

          Nikolaus-Otto-Straße 19 + 21



          Contact Trader


            Matthias Ehlers Werkzeugmaschinen
           Nikolaus-Otto-Straße 19 + 21
            22946 - Trittau
            Deutschland
            +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
            Contact person:

           




          Machine category


          · Absaugung · Anlage · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Brennschneidemaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelscheibenschleifmaschine - vertik. · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Einständerpresse - Hydraulisch · Flachschleifmaschine · Fräsmaschine - Horizontal · Fräsmaschine - Universal · Gabelstapler - Elektro · Gleitschleifanlage · Honmaschine - Innen - Horizontal · Hydraulische - Abkantpresse · Hydraulische - Tafelschere · Härteanlage · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Koordinatenbohrmaschine · Koordinatenmeßmaschine · Kurbelwellendrehmaschine · Kurbelwellenschleifmaschine · Langdrehautomat · Laserbeschriftungsmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · NC Drehmaschine · Nietmaschine · Plasmaschneidegerät · Polierautomat · Portalfräsmaschine · Rolliermaschine · Rundschleifmaschine · Rundtaktmaschine · Senkerodiermaschine · Superfinishmaschine · Tieflochbohrmaschine · Vertikaldrehmaschine · Vertikales Bearbeitungszentrum · Waschanlage - Kammer ·