Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Cold Rolling Machine

          Machinelist: Cold Rolling Machine


          Cold Rolling Machine

          used Gear cutting machines Cold Rolling Machine GROB C6-A-1020


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021035 · Cold Rolling Machine

          GROB - C6-A-1020 - - 2014 - Siemens

          Technical details
          toothing module 2.3 ︱max. length of teeth cutting 1100 mm︱gear hobbing diameter 80 Ø mm︱control Siemens ︱Number of working hours 11800 ca. h︱
          In our assessment, the machine is in a very good condition State and can be viewed by appointment. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            toothing module 2.3
            max. length of teeth cutting 1100 mm
            gear hobbing diameter 80 Ø mm
            control Siemens
            Number of working hours 11800 ca. h
            Description :
            In our assessment, the machine is in a very good condition
            State and can be viewed by appointment.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Cold Rolling Machine GROB ZRM 12 NC-DR-A890


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09847 · Cold Rolling Machine

          GROB - ZRM 12 NC-DR-A890 - - 2004 - SIEMENS 840D

          Technical details
          root circle diameter 79 - 230 mm︱centre height 1215 mm︱roll head turning speed range 1400 U/min︱x-axis 2 x 95 mm︱feed speeds infinitely variable 0 - 18000 mm/min︱rapid speed 18000 mm/min︱workpiece spindle stepless 500 U/min︱required air pressure 6 bar︱control SIEMENS 840D ︱total connected load 71 kW︱Dimensions (L x W x H) 10 x 4,5 x 3,4 mm︱Total weight, approx. 16 to︱
          Machine designed for operations on thin wall hollow parts with external/internal gears, internal gears, cluth disc carrier and gear rims. - CNC control SIEMENS 840D - installed axis X, Z, B, C, U, V - automatic workpiece handling (pallet conveyor, gantry loader FLEXOMAT) - oil processing plant (cleaning, cooling, lubrication) - manual control device - soundproofing cabin - documentation complete available - distance main spindle and rolling-spindle center (z-axis) 450 - 1250 mm - swing dia. of rolling spindles 205 mm - useable rolling spindle adjustment 95 mm per side - max. speed of workpiece spindle dep. on jigger - 500 rpm - feed for z-axis - 0 -18000 mm/min. - piston stroke of tailstock 430 mm
            root circle diameter 79 - 230 mm
            centre height 1215 mm
            roll head turning speed range 1400 U/min
            x-axis 2 x 95 mm
            feed speeds infinitely variable 0 - 18000 mm/min
            rapid speed 18000 mm/min
            workpiece spindle stepless 500 U/min
            required air pressure 6 bar
            control SIEMENS 840D
            total connected load 71 kW
            Dimensions (L x W x H) 10 x 4,5 x 3,4 mm
            Total weight, approx. 16 to
            Description :
            Machine designed for operations on thin wall hollow parts with
            external/internal gears, internal gears, cluth disc carrier and gear rims.

            - CNC control SIEMENS 840D
            - installed axis X, Z, B, C, U, V
            - automatic workpiece handling (pallet conveyor, gantry loader FLEXOMAT)
            - oil processing plant (cleaning, cooling, lubrication)
            - manual control device
            - soundproofing cabin
            - documentation complete available
            - distance main spindle and rolling-spindle center (z-axis) 450 - 1250 mm
            - swing dia. of rolling spindles 205 mm
            - useable rolling spindle adjustment 95 mm per side
            - max. speed of workpiece spindle dep. on jigger - 500 rpm
            - feed for z-axis - 0 -18000 mm/min.
            - piston stroke of tailstock 430 mm




        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Cold Rolling Machine EX-CELL-O XK 225


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-346254 · Cold Rolling Machine

          EX-CELL-O - XK 225 - - 1987 -

          Technical details
          rolling capacity max. NA t︱workpiece diameter 38 mm︱workpiece length 500 mm︱total power requirement 24 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
          Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            rolling capacity max. NA t
            workpiece diameter 38 mm
            workpiece length 500 mm
            total power requirement 24 kW
            weight of the machine ca. 10 t
            Description :
            Max.Ø tool slide stroke 760 mm
            Max.Ø rack length 610 mm

            Length of workpiece between centres, approx. 500 mm
            Max. tooth width / profile width 92 mm
            Max. workpiece Ø 38 mm
            Tailstock stroke on outboard support, hydraulic, approx. 500 mm

            Module range 0.3 - 1.3

            Total electrical load, approx. 24 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
            * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
            * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l.
            * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc.

            Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.




            Condition : Very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Cold Rolling Machine GROB 95 M


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17374 · Cold Rolling Machine

          GROB - 95 M - - 1973 -

          Technical details
          workpiece diameter 115 mm︱workpiece length 2150 mm︱gear hobbing diameter 120 mm︱max. number of teeth 96 ︱min. number of teeth 12 ︱roll head turning speed range 1.800 U/min︱feeds 30 - 180 mm/min︱rapid traverse 1.800 mm/min︱total power requirement 20 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 5,7 x 3,0 x 2,3 m︱
            workpiece diameter 115 mm
            workpiece length 2150 mm
            gear hobbing diameter 120 mm
            max. number of teeth 96
            min. number of teeth 12
            roll head turning speed range 1.800 U/min
            feeds 30 - 180 mm/min
            rapid traverse 1.800 mm/min
            total power requirement 20 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 5,7 x 3,0 x 2,3 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          GROB - EX-CELL-O -