Gear Hobbing Machine - Horizontal

hobbing length 40 mm︱max. module 1 ︱number of teeth 6- 390 ︱clamping length max. 85 mm︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 0,85 x 1,1 x 1,4 m︱

---

max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table bore diameter 80 mm︱total power requirement 7 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱

---

max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,0 x 2,1 x 2,3 m︱

---

max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱

---

max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱

---

max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱

---

max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 2 x 2 x 2 m︱

---

max. wheel diameter 150 mm︱gear width 300 mm︱max. module 4,5 ︱min. module ︱total power requirement 20 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱

---

max. wheel diameter 80 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱

---

M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

max. wheel diameter 0 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱dimensions of the machine ca. m︱

---

max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱

---

We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.

max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱

---

We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.

max. wheel diameter mm︱gear width mm︱max. module 0︱min. module 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm
Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm
Gr. to fraesender Ø Magazine: 40 mm
Gr. Milling length minus gate: 75 mm
Gr. Workpiece length with magazine: 75 mm
Gr. Depth: 4 mm
Gr. Module: 1.25
KL. being milled tooth number: 3
Main spindle hole: 18 mm
Clamping Collet clamping area: 3-18 mm
I9cyejl
9 cutter speed: 222-1410 RPM
10 longitudinal feeds: 0.031-1.25 mm
Electr. Supply: 380 V, 1 kW
Weight: 850 kg
Space requirements: 1050 x 700 x 1500 mm

gear diameter 500 mm︱max. module 5 ︱

---

In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. The machine is supplied with an extensive accessory package. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***