Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          lathe-conventional-electronic

          Machinelist: lathe-conventional-electronic


          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic WEILER LZ280


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200028 · lathe-conventional-electronic

          WEILER - LZ280 - - unbekannt -

          Technical details
          turning diameter 280 mm︱turning length 800 mm︱swing diameter over bed slide 155 mm︱speeds 50-1700 U/min︱spindle bore 24 mm︱morse taper 2 MK︱total power requirement 1,4 / 1,9 kW︱quill stroke 80 mm︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 1800 x 1200 x 1200 mm︱
          - Röhm 4-jaw chuck Ø 130 mm - Quick-change tool holder with 2 tool holders - Movable tailstock - live center
            turning diameter 280 mm
            turning length 800 mm
            swing diameter over bed slide 155 mm
            speeds 50-1700 U/min
            spindle bore 24 mm
            morse taper 2 MK
            total power requirement 1,4 / 1,9 kW
            quill stroke 80 mm
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 1800 x 1200 x 1200 mm
            Description :
            - Röhm 4-jaw chuck Ø 130 mm
            - Quick-change tool holder with 2 tool holders
            - Movable tailstock
            - live center


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic KERN DS22A


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200029 · lathe-conventional-electronic

          KERN - DS22A - - unbekannt -

          Technical details
          turning diameter 580 mm︱turning length 1500 mm︱swing diameter over bed slide mm︱spindle turning speed range 28 - 2800 U/min︱spindle bore 28 mm︱quill stroke 220 mm︱weight of the machine ca. 3500 kg︱
            turning diameter 580 mm
            turning length 1500 mm
            spindle turning speed range 28 - 2800 U/min
            spindle bore 28 mm
            quill stroke 220 mm
            weight of the machine ca. 3500 kg


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic GEMA LZ 185


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200013 · lathe-conventional-electronic

          GEMA - LZ 185 - - unbekannt -

          Technical details
          turning diameter 365 mm︱turning length 1000 mm︱swing diameter over bed slide 225 mm︱spindle bore 185 mm︱turning speeds 40 mm︱threading metric 1,4 / 3,2 kW︱inch 1,0 t︱Height of centres 2,1 x 0,7 x 1,2 m︱total power requirement 25 - 2000 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 365 mm
            turning length 1000 mm
            swing diameter over bed slide 225 mm
            spindle bore 185 mm
            turning speeds 40 mm
            threading metric 1,4 / 3,2 kW
            inch 1,0 t
            Height of centres 2,1 x 0,7 x 1,2 m
            total power requirement 25 - 2000 kW


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER Praktikant


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6622 · lathe-conventional-electronic

          WEILER - Praktikant - - unbekannt -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 800 mm
            turning speed range 42 - 2000 U/min
            feeds 0,011 - 0,91 mm/U
            tailstock quill taper MT 3
            total power requirement 2,2 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,7 x 0,8 x 2,0 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic COLCHESTER HARRISON M350


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7446 · lathe-conventional-electronic

          COLCHESTER - HARRISON M350 - - unbekannt -

          Technical details
          turning diameter 380 mm︱turning length 1000 mm︱swing diameter over bed slide 240 mm︱turning dia. in gap 585 mm︱speeds 40 -2200 U/min︱tailstock quill taper MT 4 MK ︱bed width 300 mm︱spindle bore 54 mm︱quill stroke 140 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1254 kg︱dimensions of the machine ca. 2240 x 1220 x 1400 mm︱
            turning diameter 380 mm
            turning length 1000 mm
            swing diameter over bed slide 240 mm
            turning dia. in gap 585 mm
            speeds 40 -2200 U/min
            tailstock quill taper MT 4 MK
            bed width 300 mm
            spindle bore 54 mm
            quill stroke 140 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1254 kg
            dimensions of the machine ca. 2240 x 1220 x 1400 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER Condor VS2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200027 · lathe-conventional-electronic

          WEILER - Condor VS2 - - unbekannt -

          Technical details
          turning diameter 330 mm︱turning length 800 mm︱swing diameter over bed slide 170 mm︱speeds 12 - 2800 U/min︱spindle bore 30 mm︱morse taper 3 MK︱total power requirement 2,2 kW︱quill stroke 120 mm︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1900 x 800 x 1700 mm︱
            turning diameter 330 mm
            turning length 800 mm
            swing diameter over bed slide 170 mm
            speeds 12 - 2800 U/min
            spindle bore 30 mm
            morse taper 3 MK
            total power requirement 2,2 kW
            quill stroke 120 mm
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1900 x 800 x 1700 mm
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic MVE BAUART VDF V 5 - 2000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6040 · lathe-conventional-electronic

          MVE BAUART VDF - V 5 - 2000 - - unbekannt -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle passage 81 mm︱turning speeds 18 ︱turning speed range 19 - 950 U/min︱total power requirement 11 kW︱weight of the machine ca. ca. 4,8 t︱dimensions of the machine ca. 4,5 x 1,8 x 1,6 m︱
          Electric 380Volt 3-jaw chuck Forkardt F 315 Quick change steel holder with various inserts machine light Machine feet (6 pieces) Revolving tip Coolant system
            turning diameter over bed 580 mm
            turning diameter over slide rest 350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle passage 81 mm
            turning speeds 18
            turning speed range 19 - 950 U/min
            total power requirement 11 kW
            weight of the machine ca. ca. 4,8 t
            dimensions of the machine ca. 4,5 x 1,8 x 1,6 m
            Description :
            Electric 380Volt
            3-jaw chuck Forkardt F 315
            Quick change steel holder with various inserts
            machine light
            Machine feet (6 pieces)
            Revolving tip
            Coolant system


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER 400 - 1000 Digital


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7314 · lathe-conventional-electronic

          BERNARDO - MASTER 400 - 1000 Digital - - NEU -

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱swing diameter over bed slide 240 mm︱turning dia. in gap 560 mm︱spindle bore 52 mm︱turning speeds (12) 45 - 2000 U/min U/min︱bed width 210 mm︱spindle taper MK 4 ︱quill travel 100 mm︱total power requirement 2,0 / 2,4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,6 m︱
            turning diameter 400 mm
            turning length 1000 mm
            swing diameter over bed slide 240 mm
            turning dia. in gap 560 mm
            spindle bore 52 mm
            turning speeds (12) 45 - 2000 U/min U/min
            bed width 210 mm
            spindle taper MK 4
            quill travel 100 mm
            total power requirement 2,0 / 2,4 kW
            weight of the machine ca. 0,82 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,6 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH4215D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7433 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH4215D - - NEU -

          Technical details
          turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱
          Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in an oil bath - Gears run smoothly, hardened and ground with 2 adjustable ones Precision tapered roller bearings - Handwheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric gradients in the range of 0.2 to 14 mm / rev and all Inch threads in the range of 72 - 2 threads per inch without replacing the Change gears can be set using the switch lever in the control panel - Clockwise / counterclockwise rotation on the bed slide can be switched using the switch spindle - Central lubrication in the bed slide - Base and machine bed made of Meehanite cast in one piece - Lead screw cover - Emergency stop device with foot actuation - Safety handwheels with push-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground Gray cast iron - Coolant device with separate coolant tank with level indicator and Oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip protection Models TH 4210D and TH 4215D with digital position indicator DPA21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Live steady rest passage Ø 10 - 75 mm - LED machine light - Reduction sleeve MK 6 / MK 4 - Fixed center point MK 4 - Change gears set - Position stop with fine adjustment - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH3-E set ** 6x leveling feet SE85 with vibration isolation plate
            turning diameter 420 mm
            turning length 1500 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 590 mm
            centre height 210 mm
            Turning length in the bed bridge 260 mm
            reus 16 (45-1800) U/min
            tail stock MK 4
            quill stroke 120 mm
            diameter of quill 50 mm
            spindle taper DIN ISO 702-2 Nr. 6
            spindle bore 52 mm
            spindle cone MK 6
            feed längs 17 / 0,05 - 1,7 m/min
            feed plan 17 / 0,025 - 0,85 m/min
            total power requirement 4,6 kW
            weight of the machine ca. 1340 kg
            dimensions of the machine ca. 2440 x 915 x 1375 mm
            Description :
            Fully equipped leading and tension spindle lathes. TH 4215 with
            digital position indicator DPA 21

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 6
            - Precisely crafted slide
            - Handwheels with adjustable fine scale 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Upper slide adjustment range ± 90 °
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Main spindle running in an oil bath
            - Gears run smoothly, hardened and ground with 2 adjustable ones
            Precision tapered roller bearings
            - Handwheels decoupled and tested according to EN 23125
            - Two-channel right-left switch tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - All metric gradients in the range of 0.2 to 14 mm / rev and all
            Inch threads in the range of 72 - 2 threads per inch without replacing the
            Change gears can be set using the switch lever in the control panel
            - Clockwise / counterclockwise rotation on the bed slide can be switched using
            the switch spindle
            - Central lubrication in the bed slide
            - Base and machine bed made of Meehanite cast in one piece
            - Lead screw cover
            - Emergency stop device with foot actuation
            - Safety handwheels with push-out function in the X and Z axes
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and handwheel with adjustable fine scale 0.025 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, inductively hardened and precision ground
            Gray cast iron
            - Coolant device with separate coolant tank with level indicator and
            Oil separator; easy and complete emptying and cleaning according to DIN
            - LED machine lamp in the chip protection

            Models TH 4210D and TH 4215D with digital position indicator DPA21
            - User-friendly membrane keyboard, splash-proof, closed
            and glare-free
            - glass rulers

            scope of delivery
            - Fixed bezel passage Ø 15 - 145 mm
            - Live steady rest passage Ø 10 - 75 mm
            - LED machine light
            - Reduction sleeve MK 6 / MK 4
            - Fixed center point MK 4
            - Change gears set
            - Position stop with fine adjustment
            - Initial machine filling with quality oil
            - operating tool

            ** Including special accessories OPTIMUM three-jaw lathe chuck centrically
            clamping Ø 250 mm
            ** Quick change holder SWH3-E set
            ** 6x leveling feet SE85 with vibration isolation plate


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER PRO 360


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7238 · lathe-conventional-electronic

          BERNARDO - MASTER PRO 360 - - NEU -

          Technical details
          turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5 ︱tail stock 3 MK ︱quill travel 100 mm︱total power requirement 1,5 /2,2 kW︱weight of the machine ca. 0,58 t︱dimensions of the machine ca. 1,83 x 0,76 x 1,6 m︱
            turning diameter 360 mm
            turning length 1000 mm
            swing diameter over bed slide 220 mm
            turning dia. in gap 502 mm
            spindle bore 52 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            tail stock 3 MK
            quill travel 100 mm
            total power requirement 1,5 /2,2 kW
            weight of the machine ca. 0,58 t
            dimensions of the machine ca. 1,83 x 0,76 x 1,6 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO Standard 165 V-D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7237 · lathe-conventional-electronic

          BERNARDO - Standard 165 V-D - - NEU -

          Technical details
          turning diameter 350 mm︱turning length 1000 mm︱swing diameter over bed slide -- mm︱turning diameter in the gap 450 mm︱spindle bore 40 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4 ︱tail stock 3 MK ︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,53 t︱dimensions of the machine ca. 1,73 x 0,7 x 1,35 m︱
            turning diameter 350 mm
            turning length 1000 mm
            swing diameter over bed slide -- mm
            turning diameter in the gap 450 mm
            spindle bore 40 mm
            turning speeds 70 - 2000 U/min
            bed width 180 mm
            spindle taper 55029 D 1-4
            tail stock 3 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,53 t
            dimensions of the machine ca. 1,73 x 0,7 x 1,35 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7375 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH 3309D - - NEU -

          Technical details
          turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱
          Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
            turning diameter 330 mm
            turning length 830 mm
            swing diameter over bed slide 196 mm
            Swingdiameter in the bed bridge 170
            centre height 165 mm
            centre distance 830 mm
            Turning length in the bed bridge 430
            reus 16 (70-2000) U/min
            tail stock MK 3
            quill stroke 110 mm
            diameter of quill 32 mm
            spindle taper DIN ISO 702-2 Nr. 4
            spindle bore 38 mm
            spindle cone MK 5
            feed längs 32 / 0,052 1,392 m/min
            feed plan 3,2 / 0,014 0,38 m/min
            weight of the machine ca. 0,52 t
            dimensions of the machine ca. 1,7 x 0,75 x 1,6 m
            Description :
            Fully equipped leading and tension spindle lathes. TH 3309D with
            digital position indicator DPA 21/3402040

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 4
            - Precisely crafted slide
            - Handwheels with adjustable fine scale 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Main spindle running in an oil bath
            - Gear wheels run smoothly, hardened and ground
            - Upper slide adjustment range ± 90 °
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Handwheels decoupled and tested according to EN 23125
            - Safety handwheels with push-out function in the X and Z axes
            - Two-channel right-left switch tested according to EN 23125
            - DC 24 volt electrical system with two-channel safety circuit according to EN
            23125
            - Lathe chuck protection tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - Lockable main switch
            - Clockwise / counterclockwise rotation on the bed slide switchable
            - Lead screw cover
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and handwheel with adjustable fine scale 0.02 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, inductively hardened and precision ground
            - Machine base with tool compartment on the right-hand side (left-hand side
            with 3
            Bezels (no compartments)
            - Pull-out chip tray with guide rails
            - Emergency stop device with foot actuation
            - LED machine lamp integrated in the chip guard

            Digital position indicator DPA 21
            - User-friendly membrane keyboard, splash-proof, closed
            and glare-free
            - glass rulers

            scope of delivery
            - Fixed steady rest passage Ø 6 - Ø 50 mm
            - Moving steady rest passage Ø 8 - Ø 30 mm
            - LED machine light
            - Reduction sleeve MK 5 / MK 3
            - Two fixed centering points MK 3
            - Quadruple steel holder 16 mm
            - Change gears set
            - machine base
            - Initial machine filling with quality oil
            - operating tool

            ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping
            Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic ECHEA BRN 1000-C


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-519 · lathe-conventional-electronic

          ECHEA - BRN 1000-C - - Modernisierung 2006 - Heidenhain

          Technical details



        • INTER-PLAST
        • 42-209 Czestochowa

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic ECHEA B-800


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-518 · lathe-conventional-electronic

          ECHEA - B-800 - - Modernisierung 2006 - Heidenhain

          Technical details



        • INTER-PLAST
        • 42-209 Czestochowa

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER Praktikant 800 R


          • Emuk GmbH Werkzeugmaschinen
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-22083 · lathe-conventional-electronic

          WEILER - Praktikant 800 R - - ca. 1989 -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore 36 mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 800 mm
            spindle bore 36 mm
            turning speed range 42 - 2000 U/min
            feeds 0,011 - 0,91 mm/U
            tailstock quill taper MT 3
            total power requirement 2,2 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,7 x 0,8 x 2,0 m


        • Emuk GmbH Werkzeugmaschinen
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER Praktikant 800 R


          • Emuk GmbH Werkzeugmaschinen
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-22065 · lathe-conventional-electronic

          WEILER - Praktikant 800 R - - ca. 1989 -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore 36 mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 800 mm
            spindle bore 36 mm
            turning speed range 42 - 2000 U/min
            feeds 0,011 - 0,91 mm/U
            tailstock quill taper MT 3
            total power requirement 2,2 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,7 x 0,8 x 2,0 m


        • Emuk GmbH Werkzeugmaschinen
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic JMTCL CW61125B


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-D273 · lathe-conventional-electronic

          JMTCL - CW61125B - - 2021 -

          Technical details
          turning diameter 1250 mm︱turning length 1500 mm︱swing diameter over bed slide 850 mm︱total power requirement 22 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3100x2150x1825 m︱
          Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø
            turning diameter 1250 mm
            turning length 1500 mm
            swing diameter over bed slide 850 mm
            total power requirement 22 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3100x2150x1825 m
            Description :
            Brand: JMTCL
            Type: CW61125B
            Distance between centers: 1.500 mm
            Centerheight: 625 mm
            Swing over bed: 1.250 mm ø
            Swing over support: 850 mm ø
            Maximum turning diameter : 1.250ø x 1.500 mm ø
            Spindle boring: 135 mm ø


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic POREBA TR 100


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11772CE · lathe-conventional-electronic

          POREBA - TR 100 - - 2013 -

          Technical details
          turning diameter 1050 mm︱turning length 6000 mm︱swing diameter over bed slide 750 mm︱spindle diameter 95 mm︱turning speeds 5-500 (16x) U/min︱faceplate with 4 clamps dia. 1000 mm︱total power requirement 27/41 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 1050 mm
            turning length 6000 mm
            swing diameter over bed slide 750 mm
            spindle diameter 95 mm
            turning speeds 5-500 (16x) U/min
            faceplate with 4 clamps dia. 1000 mm
            total power requirement 27/41 kW


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic PINACHO S-90/200


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2022107 · lathe-conventional-electronic

          PINACHO - S-90/200 - - 2010 -

          Technical details
          turning diameter 400 mm︱turning length 1150 mm︱centre height 200 mm︱swing diameter over bed slide 210 mm︱main spindle: ︱turning speed range - main spindle 40-2200 min/-1︱transmission ratio 12 ︱spindle head DIN 55027-6 ︱spindle bore 52 mm︱workpiece support: Schnellwechselhalter ︱turning tool - shaft cross cut 25 x 25 mm︱tail stock: ︱quill stroke 155 mm︱dia. of quill 58 mm︱tailstock taper MK4 ︱feeds: ︱longitudinal feed 0,05 - 0,75 mm︱face feed 0,025 - 0,375 mm︱travel: ︱radial face slide travel 300 mm︱
          In our opinion, the machine is in very good condition and can be inspected under power by appointment. There are 8 identical machines available. Accesories: - Three-jaw nut - Digital display ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 400 mm
            turning length 1150 mm
            centre height 200 mm
            swing diameter over bed slide 210 mm
            turning speed range - main spind. 40-2200 min/-1
            transmission ratio 12
            spindle head DIN 55027-6
            spindle bore 52 mm
            workpiece support: Schnellwechselhalter
            turning tool - shaft cross cut 25 x 25 mm
            quill stroke 155 mm
            dia. of quill 58 mm
            tailstock taper MK4
            longitudinal feed 0,05 - 0,75 mm
            face feed 0,025 - 0,375 mm
            radial face slide travel 300 mm
            Description :
            In our opinion, the machine is in very good condition
            and can be inspected under power by appointment.

            There are 8 identical machines available.

            Accesories:
            - Three-jaw nut
            - Digital display

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***



        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK CU 760


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200014 · lathe-conventional-electronic

          BULMAK - CU 760 - - 2008 -

          Technical details
          turning diameter 760 mm︱turning length 3000 mm︱swing diameter over bed slide 520 mm︱spindle bore 380 mm︱turning speeds 130 mm︱feed - longitudinal/cross 0,039 - 36 mm/min︱threading metric 11 kW︱inch 5950 kg︱Height of centres 5000 x 1650 x 1650 mm︱total power requirement 8 - 1050 kW︱weight of the machine ca. kg︱dimensions of the machine ca. mm︱
          - 3-jaw chuck Ø400 mm - ACU-RITE 3-axis digital readout - MULTIFIX steel holder size. D1 incl. 1x tool holder - bezel - Coolant device with tub - Rear chip guard - Lathe chuck protection - Operation manual
            turning diameter 760 mm
            turning length 3000 mm
            swing diameter over bed slide 520 mm
            spindle bore 380 mm
            turning speeds 130 mm
            feed - longitudinal/cross 0,039 - 36 mm/min
            threading metric 11 kW
            inch 5950 kg
            Height of centres 5000 x 1650 x 1650 mm
            total power requirement 8 - 1050 kW
            Description :
            - 3-jaw chuck Ø400 mm
            - ACU-RITE 3-axis digital readout
            - MULTIFIX steel holder size. D1 incl. 1x tool holder
            - bezel
            - Coolant device with tub
            - Rear chip guard
            - Lathe chuck protection
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic ZMM CU 1250 RD


          • Siegfried Volz Werkzeugmaschinen
          • Rüschebrinkstr. 151-153
          • 44143 Dortmund
          • Deutschland

          • +49 (0) 231 3344544
            +49 (0) 231 3344533
          • info@sv-wzm.de
            www.sv-wzm.de
          #2073-I2358 · lathe-conventional-electronic

          ZMM - CU 1250 RD - - 2006 -

          Technical details
          turning diameter 1320 mm︱turning length 6000 mm︱swing diameter over bed slide 940 mm︱turning diameter in the gap 1510 mm︱total power requirement 30 kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. m︱
            turning diameter 1320 mm
            turning length 6000 mm
            swing diameter over bed slide 940 mm
            turning diameter in the gap 1510 mm
            total power requirement 30 kW
            weight of the machine ca. 13 t


        • Siegfried Volz Werkzeugmaschinen
        • Rüschebrinkstr. 151-153
        • 44143 Dortmund
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic HUVEMA HU 410 VAC x 1000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207311 · lathe-conventional-electronic

          HUVEMA - HU 410 VAC x 1000 - - 2005 -

          Technical details
          turning length 1000 mm︱turning diameter over bed 410 mm︱turning diameter over slide rest 255 mm︱turning dia. in gap 580 mm︱length 250 mm︱number of spindle speeds 30 - 3000 U/min.︱spindle bore 52,0 mm︱tailstock quill taper MT MK 4 ︱quill stroke 120 mm︱bed width 250 mm︱adjustment Plan 225 mm︱spindle taper DIN 55029, D1 - 6 ︱total power requirement 5,5 kW︱weight of the machine ca. 1550 kg︱range L-W-H 1900 x 850 x 1320 mm︱
          ** New price ~ 13,500 euros ** from a maintenance workshop (!!) Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centres. Furnishing: - Robust master and feed spindle lathe - NEWALL digital display, front left - 3-jaw chuck Ø 200 mm, with spare jaws - MULTIFIX steel holder with 3x inserts - Infinitely variable speed adjustment, with digital speed display - Movable tailstock - Taper mandrel with keyless chuck - Chip protection rear panel - foot brake - User manual (PDF)
            turning length 1000 mm
            turning diameter over bed 410 mm
            turning diameter over slide rest 255 mm
            turning dia. in gap 580 mm
            length 250 mm
            number of spindle speeds 30 - 3000 U/min.
            spindle bore 52,0 mm
            tailstock quill taper MT MK 4
            quill stroke 120 mm
            bed width 250 mm
            adjustment Plan 225 mm
            spindle taper DIN 55029, D1 - 6
            total power requirement 5,5 kW
            weight of the machine ca. 1550 kg
            range L-W-H 1900 x 850 x 1320 mm
            Description :
            ** New price ~ 13,500 euros
            ** from a maintenance workshop (!!)

            Lathe with precision ground and induction hardened bed.
            Very suitable for use in workshops and training centres.

            Furnishing:
            - Robust master and feed spindle lathe
            - NEWALL digital display, front left
            - 3-jaw chuck Ø 200 mm, with spare jaws
            - MULTIFIX steel holder with 3x inserts
            - Infinitely variable speed adjustment, with digital speed display
            - Movable tailstock
            - Taper mandrel with keyless chuck
            - Chip protection rear panel
            - foot brake
            - User manual (PDF)


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic ZMM / HUVEMA HU 310 VAC


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207304 · lathe-conventional-electronic

          ZMM / HUVEMA - HU 310 VAC - - 2004 -

          Technical details
          turning length 750 mm︱turning diameter 400 mm︱centre height 165 mm︱turning diameter over slide rest 190 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱total power requirement 2,2 kW︱weight of the machine ca. 770 kg︱range L-W-H 1985 x 890 x 1195 mm︱
          ** New price ~ 23,000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 400 mm - Distance between centers 750 mm - Center height 165 mm - Spindle bore 32 mm - Turning diameter over cross slide 190 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg
            turning length 750 mm
            turning diameter 400 mm
            centre height 165 mm
            turning diameter over slide rest 190 mm
            spindle bore 32,0 mm
            tailstock quill taper MT 3 MK
            turning speeds 85 - 2200 U/min
            bed width 200 mm
            total power requirement 2,2 kW
            weight of the machine ca. 770 kg
            range L-W-H 1985 x 890 x 1195 mm
            Description :
            ** New price ~ 23,000 euros
            ** from a training workshop (!!)

            Furnishing:
            - Spindle speed continuously adjustable in 2x switching stages
            - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key
            - "NEWALL" digital display, front left
            - MULTIFIX steel holder with inserts
            - Movable tailstock
            - live center, incl. quick-action drill chuck
            - digital speed display
            - Change gears
            - Foot/spindle brake

            * all technical data:
            - Turning diameter over bed 400 mm
            - Distance between centers 750 mm
            - Center height 165 mm
            - Spindle bore 32 mm
            - Turning diameter over cross slide 190 mm
            - bed width 200 mm
            - Spindle mount / DIN55027 5
            - Spindle taper 4.5 M
            - Spindle speed infinitely variable in switching stages 2
            - Spindle speed stepless 85-405; 470-2200 rpm
            - Number of feeds 48
            - Metric thread range 0.1 - 28 mm
            - Thread module range 0.1 - 1.75
            - Thread DP range 4 - 70
            - Adjustment range cross slide 150 mm
            - Adjustment range top slide 95 mm
            - Tailstock quill diameter 40 mm
            - Tailstock recording 3 MK
            - Tailstock quill travel 100 mm
            - Motor power 2.2 kW
            - Weight 770 kg


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic ZMM / HUVEMA HU 310 VAC


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207305 · lathe-conventional-electronic

          ZMM / HUVEMA - HU 310 VAC - - 2004 -

          Technical details
          turning length 750 mm︱turning diameter 400 mm︱centre height 165 mm︱turning diameter over slide rest 190 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱total power requirement 2,2 kW︱weight of the machine ca. 770 kg︱range L-W-H 1985 x 890 x 1195 mm︱
          ** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 400 mm - Distance between centers 750 mm - Center height 165 mm - Spindle bore 32 mm - Turning diameter over cross slide 190 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg
            turning length 750 mm
            turning diameter 400 mm
            centre height 165 mm
            turning diameter over slide rest 190 mm
            spindle bore 32,0 mm
            tailstock quill taper MT 3 MK
            turning speeds 85 - 2200 U/min
            bed width 200 mm
            total power requirement 2,2 kW
            weight of the machine ca. 770 kg
            range L-W-H 1985 x 890 x 1195 mm
            Description :
            ** New price ~ 23.000 euros
            ** from a training workshop (!!)

            Furnishing:
            - Spindle speed continuously adjustable in 2x switching stages
            - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key
            - "NEWALL" digital display, front left
            - MULTIFIX steel holder with inserts
            - Movable tailstock
            - live center, incl. quick-action drill chuck
            - digital speed display
            - Change gears
            - Foot/spindle brake

            * all technical data:
            - Turning diameter over bed 400 mm
            - Distance between centers 750 mm
            - Center height 165 mm
            - Spindle bore 32 mm
            - Turning diameter over cross slide 190 mm
            - bed width 200 mm
            - Spindle mount / DIN55027 5
            - Spindle taper 4.5 M
            - Spindle speed infinitely variable in switching stages 2
            - Spindle speed stepless 85-405; 470-2200 rpm
            - Number of feeds 48
            - Metric thread range 0.1 - 28 mm
            - Thread module range 0.1 - 1.75
            - Thread DP range 4 - 70
            - Adjustment range cross slide 150 mm
            - Adjustment range top slide 95 mm
            - Tailstock quill diameter 40 mm
            - Tailstock recording 3 MK
            - Tailstock quill travel 100 mm
            - Motor power 2.2 kW
            - Weight 770 kg


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   


          Discover the versatility of a conventional electronic lathe
          The conventional electronic lathe has stood the test of time

          For centuries the lathe has been one of the most functional tools in the shaping of various materials. From clay to metal lathes have stood the test of time in terms of their reliability and practicality. In this day and age a conventional electronic lathe is an extremely versatile tool for both a home workshop and a large factory. Its ability to work on a wide range of materials and its cost-to-production ratio make it a perennial favourite.

          Versatility at your fingertips with an electronic lathe

          A conventional electronic lathe is a smart investment. Whether you're a hobbyist or an industrial professional the benefits of a conventional electronic lathe are clear. Lathes are relatively easy to operate and offer high productivity at a low cost. The advantage of a conventional electronic lathe is that it requires almost no man power and still produces high quality products. If you're in the market for a lathe or any other machining equipment check out LagerMaschinen.

          LagerMaschinen: offering you convenience and cost-efficiency

          In times like these time and money are things that few can afford to waste. If you're looking to save both try shopping for used machinery online. Whether for home or business you'll find a vast array of used machinery at LagerMaschinen. Buying used machinery doesn't mean sacrificing quality because at LagerMaschinen you can find lightly used machines like a conventional electronic lathe at a price you can afford! Make the smart business choice and visit LagerMaschinen.