Rete europea di concessionari di macchine per stoccaggio

Bitte einen Suchbegriff eingeben - Inserisci un termine di ricerca
Categoria:
    Produttore:
      macchine:
        trader:

          Planer-Type Milling M-C - Double Column

          Machinelist: Planer-Type Milling M/C - Double Column


          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column BÖHRINGER FZ 31 /1800


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00819 · Planer-Type Milling M/C - Double Column

          BÖHRINGER - FZ 31 /1800 - - ca.1980 -

          Technical details
          x-travel 1800 mm︱y-travel 800 mm︱z-travel 500 mm︱total power requirement 55 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 3 x 8 x 3 m︱
            x-travel 1800 mm
            y-travel 800 mm
            z-travel 500 mm
            total power requirement 55 kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. 3 x 8 x 3 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH COBURG 17-10 FP 225


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column REICHLE & KNOEDLER


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-102011 · Planer-Type Milling M/C - Double Column

          REICHLE & KNOEDLER - - - 79/99 - konventionell

          Technical details
          x-travel 2650 mm︱y-travel 1270 mm︱z-travel 1000 mm︱total power requirement kW︱weight of the machine ca. 25 t︱required space m︱
            x-travel 2650 mm
            y-travel 1270 mm
            z-travel 1000 mm
            weight of the machine ca. 25 t


        • Meister Maschinen
        • Overhagener Weg 44
        • 59597 Erwitte
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC SE 1612


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-2345LAG · Planer-Type Milling M/C - Double Column

          V-TEC - SE 1612 - - 2022 - HEIDENHAIN TNC 640

          Technical details
          1600 mm︱ 1200 mm︱ 1020 mm︱ 1100x1800 mm︱ MAS403 BBT 4015000 U/min︱ 27/32,4 kW︱ 1250 mm︱ 24
            1600 mm
            1200 mm
            1020 mm
            1100x1800 mm
            MAS403 BBT 40
            15000 U/min
            27/32,4 kW
            1250 mm
            24


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC NF 5223


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020008 · Planer-Type Milling M/C - Double Column

          V-TEC - NF 5223 - - 2022 - FANUC Oi-MF PLUS

          Technical details
          5200 mm︱ 2300 mm︱ 1400 mm︱ 5200x2050 mm︱ BT 506000 U/min︱ 22/26 kW︱ 2440 mm︱ 40
            5200 mm
            2300 mm
            1400 mm
            5200x2050 mm
            BT 50
            6000 U/min
            22/26 kW
            2440 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC VF 3000


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020006 · Planer-Type Milling M/C - Double Column

          V-TEC - VF 3000 - - 2022 - FANUC Oi-MF PLUS

          Technical details
          3200 mm︱ 2300 mm︱ 920 mm︱ 3200x2050 mm︱ BBT 506000 U/min︱ 22/26 kW︱ 2400 mm︱ 40
            3200 mm
            2300 mm
            920 mm
            3200x2050 mm
            BBT 50
            6000 U/min
            22/26 kW
            2400 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC VF 4000


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020005 · Planer-Type Milling M/C - Double Column

          V-TEC - VF 4000 - - 2022 - FANUC Oi-MF PLUS

          Technical details
          4200 mm︱ 2300 mm︱ 1020 mm︱ 4200x2050 mm︱ BBT 506000 U/min︱ 30/37 kW︱ 2400 mm︱ 40
            4200 mm
            2300 mm
            1020 mm
            4200x2050 mm
            BBT 50
            6000 U/min
            30/37 kW
            2400 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC VF 4026


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020007 · Planer-Type Milling M/C - Double Column

          V-TEC - VF 4026 - - 2022 - FANUC Oi-MF PLUS

          Technical details
          4200 mm︱ 2600 mm︱ 1020 mm︱ 4200x2050 mm︱ BBT 506000 U/min︱ 30/37 kW︱ 2700 mm︱ 40
            4200 mm
            2600 mm
            1020 mm
            4200x2050 mm
            BBT 50
            6000 U/min
            30/37 kW
            2700 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC SF 3120


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-2412LAG · Planer-Type Milling M/C - Double Column

          V-TEC - SF 3120 - - 2022 - FANUC Oi

          Technical details
          3100 mm︱ 2000 mm︱ 1020 mm︱ 3100x2000 mm︱ SK 50 DIN 697816000 U/min︱ 22/26 kW︱ 2100 mm︱ 40
            3100 mm
            2000 mm
            1020 mm
            3100x2000 mm
            SK 50 DIN 69781
            6000 U/min
            22/26 kW
            2100 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC VF 5000


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-2413LAG · Planer-Type Milling M/C - Double Column

          V-TEC - VF 5000 - - 2022 - HEIDENHAIN TNC 640

          Technical details
          5200 mm︱ 2300 mm︱ 1020 mm︱ 5200x2050 mm︱ SK 50 DIN 697814000 U/min︱ 24/30 kW︱ 2400 mm︱ 40
            5200 mm
            2300 mm
            1020 mm
            5200x2050 mm
            SK 50 DIN 69781
            4000 U/min
            24/30 kW
            2400 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC SE 1618


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-2373LAG · Planer-Type Milling M/C - Double Column

          V-TEC - SE 1618 - - 2022 - HEIDENHAIN TNC 640

          Technical details
          1600 mm︱ 1800 mm︱ 1020 mm︱ 1800x1600 mm︱ MAS 403 BBT 4015000 U/min︱ 27/32,4 kW︱ 1250 mm︱ 40
            1600 mm
            1800 mm
            1020 mm
            1800x1600 mm
            MAS 403 BBT 40
            15000 U/min
            27/32,4 kW
            1250 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column OPTIMUM OPTImill FP 4200


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8709 · Planer-Type Milling M/C - Double Column

          OPTIMUM - OPTImill FP 4200 - - 2020 - Sinumerik 828D Siemens

          Technical details
          x-travel 4.200 mm︱y-travel 1.400 mm︱z-travel 850 mm︱control Sinumerik 828D Siemens︱Main spindle: ︱turning speed range - main spindle max. 8.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱transmission ratio 2 ︱max. Torque - Nm︱tool taper ISO 50 ︱work table: ︱table surface area 3.200 x 1.200 mm︱max. table load 8.000 kg︱T-slots 7x 22 x 150 mm︱distance spindle /table 50 - 900 mm︱distance between columns 1.400 mm︱distance spindle / column max. 404 mm︱Tool-Presetter: ︱number of toolpositions 32 pos.︱tool taper ISO 50
          CNC-Travel-Column-Milling Machine OPTIMUM - OPTImill FP 4200 - NEW MACHINE / SHOW-ROOM-MACHINE - Price is Basic-Price, Oprtions available for surcharge - alternative configuration available, optional and on request !
            x-travel 4.200 mm
            y-travel 1.400 mm
            z-travel 850 mm
            control Sinumerik 828D Siemens
            turning speed range - main spind. max. 8.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            transmission ratio 2
            max. Torque - Nm
            tool taper ISO 50
            table surface area 3.200 x 1.200 mm
            max. table load 8.000 kg
            T-slots 7x 22 x 150 mm
            distance spindle /table 50 - 900 mm
            distance between columns 1.400 mm
            distance spindle / column max. 404 mm
            number of toolpositions 32 pos.
            tool taper ISO 50
            Description :
            CNC-Travel-Column-Milling Machine
            OPTIMUM - OPTImill FP 4200

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - Price is Basic-Price, Oprtions available for surcharge

            - alternative configuration available, optional and on request !


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MITSUBISHI MVR 40Ex


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18562 · Planer-Type Milling M/C - Double Column

          MITSUBISHI - MVR 40Ex - - 2019 - Fanuc 31i-MB

          Technical details
          x-travel 6000 mm︱y-travel 4000 mm︱z-travel 800 mm︱w-axis 1300 mm︱Main spindle: ︱turning speed range - main spindle 20 - 8000 min/-1︱power capacity - main spindel 22 / 30 kW︱tool taper ISO 50 ︱work table: ︱table surface area 6000 x 3000 mm︱max. workpiece weight 30 t︱column daylight 3750 mm︱Tool-Presetter: ︱number of toolpositions 60 pos.︱tool taper ISO 50 ︱feeds: 1 -10000 mm/min︱rapid traverse ( X / Y / Z ) 20/22/15 m/min︱rapid traverse W: 5 m/min︱control Fanuc 31i-MB ︱ram head dimension 350 x 350 mm︱
          Double-column, 5-face milling machine equipped with: - CNC control Fanuc 31i-MB - Automatic Head Changer and Right Angle Head Standard - 5 Face Machining Software Standard - Rigid Heavy Cutting Design - ATC 60-fold
            x-travel 6000 mm
            y-travel 4000 mm
            z-travel 800 mm
            w-axis 1300 mm
            turning speed range - main spind. 20 - 8000 min/-1
            power capacity - main spindel 22 / 30 kW
            tool taper ISO 50
            table surface area 6000 x 3000 mm
            max. workpiece weight 30 t
            column daylight 3750 mm
            number of toolpositions 60 pos.
            tool taper ISO 50
            feeds: 1 -10000 mm/min
            rapid traverse ( X / Y / Z ) 20/22/15 m/min
            rapid traverse W: 5 m/min
            control Fanuc 31i-MB
            ram head dimension 350 x 350 mm
            Description :
            Double-column, 5-face milling machine equipped with:
            - CNC control Fanuc 31i-MB
            - Automatic Head Changer and Right Angle Head Standard
            - 5 Face Machining Software Standard
            - Rigid Heavy Cutting Design
            - ATC 60-fold


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZIMMERMANN FZ33c


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-34 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ33c - - 2016 - Heidenhain iTNC 530 HSCI

          Technical details
          x-travel 2500 mm︱y-travel 3000 mm︱z-travel 1250 mm︱Control Heidenhain iTNC 530 HSCI ︱head swivability +-110 °︱c-axis +-300 ︱table load 16 t︱table surface area 3250 x 2500 mm︱spindle turning speed range 25000 U/min︱tool taper HSK A 63 ︱tool change unit 50 fach Kette︱total power requirement kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. 7600 x 7300 x 5650 mm︱
          This ZIMMERMANN FZ33c is in mint, very good condition and can be viewed live by arrangement. New price over 1,2 million Technical data of the system and work areas X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Clamping table Length x width x height 2500 x 3250 x 400mm Table load 8000 kg / m² (max. 16000 kg) T-slots, arranged lengthways 18H12 Distance between T-slots 250 mm Dimensions, weights Required space (without peripheral devices) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection values Voltage (three-phase) 400 V Frequency 50 Hz For fuse see installation plan See floor plan for power requirements Compressed air connection (on site) Required air pressure 6 bar Average air consumption approx. 15 m³ / h (depending on the machine equipment) Drives linear axes Feed speed X-, Y-, Z-axis 60 m / min Axis acceleration X, Y, Z axis up to 5 m / s² Drives for rotary axes –VH30 A-, C-axis feed rate 360 ??° / s Axis acceleration A, C axis 700 ° / s² Resolution A, C axis 0.0001 Accuracies of linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Resolution of the measuring systems (interpol) A, C axis 0.0001 ° Accuracy of rotary axes –VH30 Positioning accuracy A, C axis P = 12 “= 0.0033 ° Repeat accuracy A, C axis Ps = 8 “= 0.0022 ° Milling head VH20 External dimensions fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes control circuit A: min. 1200 Nm C: min. 1047 Nm clamped A and C axes: 3000 Nm Milling spindle (Siemens-Weiss) Spindle power S1 (100% ED) 45 kW Spindle speed 25,000 min-1 (Permanent grease lubrication with automatic relubrication system) Torque S1 (100% ED) 67 Nm Constant output 6,400 - 25,000 rpm Swivel axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping spring clamp Hydraulic tool clamping Permissible tool weight 4.5 kg (manufacturer's specification) External coolant supply Inside
            x-travel 2500 mm
            y-travel 3000 mm
            z-travel 1250 mm
            Control Heidenhain iTNC 530 HSCI
            head swivability +-110 °
            c-axis +-300
            table load 16 t
            table surface area 3250 x 2500 mm
            spindle turning speed range 25000 U/min
            tool taper HSK A 63
            tool change unit 50 fach Kette
            weight of the machine ca. 53,5 t
            dimensions of the machine ca. 7600 x 7300 x 5650 mm
            Description :
            This ZIMMERMANN FZ33c is in mint, very good condition and can be viewed live by
            arrangement.
            New price over 1,2 million
            Technical data of the system and work areas
            X-axis 2500 mm
            Y-axis 3000 mm
            Z-axis 1250 mm
            A-axis ± 110 °
            C-axis ± 300 °

            Clamping table
            Length x width x height 2500 x 3250 x 400mm
            Table load 8000 kg / m² (max. 16000 kg)
            T-slots, arranged lengthways 18H12
            Distance between T-slots 250 mm

            Dimensions, weights
            Required space (without peripheral devices) approx. 7600 x 7300 x 5650 mm
            Total weight approx. 53500 kg

            Electrical connection values
            Voltage (three-phase) 400 V
            Frequency 50 Hz
            For fuse see installation plan
            See floor plan for power requirements

            Compressed air connection (on site)
            Required air pressure 6 bar
            Average air consumption approx. 15 m³ / h (depending on the machine equipment)

            Drives linear axes
            Feed speed X-, Y-, Z-axis 60 m / min
            Axis acceleration X, Y, Z axis up to 5 m / s²

            Drives for rotary axes –VH30
            A-, C-axis feed rate 360 ??° / s
            Axis acceleration A, C axis 700 ° / s²
            Resolution A, C axis 0.0001

            Accuracies of linear axes - according to VDI / DGQ 3441
            Positioning accuracy X-axis P = 0.026 mm
            Y-axis P = 0.028 mm
            Z axis P = 0.020 mm
            Repeatability X-axis Ps = 0.015 mm
            Y axis Ps = 0.016 mm
            Z-axis Ps = 0.010 mm
            Resolution of the measuring systems (interpol) A, C axis 0.0001 °

            Accuracy of rotary axes –VH30
            Positioning accuracy A, C axis P = 12 “= 0.0033 °
            Repeat accuracy A, C axis Ps = 8 “= 0.0022 °

            Milling head VH20
            External dimensions fork head L x W approx. 500 x 600 mm
            Nominal torque of rotary axes control circuit A: min. 1200 Nm
            C: min. 1047 Nm
            clamped A and C axes: 3000 Nm

            Milling spindle (Siemens-Weiss)
            Spindle power S1 (100% ED) 45 kW
            Spindle speed 25,000 min-1
            (Permanent grease lubrication with automatic relubrication system)
            Torque S1 (100% ED) 67 Nm
            Constant output 6,400 - 25,000 rpm
            Swivel axis - spindle nose 326 mm
            Tool holder HSK 63 A
            Tool clamping spring clamp
            Hydraulic tool clamping
            Permissible tool weight 4.5 kg (manufacturer's specification)
            External coolant supply
            Inside


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column SNK-SHIN NIPPON KOKI RB 300 F


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19088 · Planer-Type Milling M/C - Double Column

          SNK-SHIN NIPPON KOKI - RB 300 F - - 2012 - FANUC 30i-A

          Technical details
          x-travel 8250 mm︱y-travel 3820 mm︱z-travel 600 mm︱w-axis 850 mm︱table-size 8000 x 3000 mm︱distance between columns 3400 mm︱workpiece weight 30 t︱b-axis +/- 95 °︱c-axis +/- 360 °︱spindle diameter 90 mm︱spindle turning speed range 150 - 15000 U/min︱spindle taper ISO Iso 50 ︱spindle motor 50 / 55 kW︱feeds x/y/z -stepless 1 - 6000 mm/min︱rapid travel x/y/z 15/15/6 m/min︱Control FANUC 30i-A ︱ram diameter 450 x 450 mm︱total power requirement - KVA︱weight of the machine ca. - t︱dimensions of the machine ca. 8,2 x 21,6 x 6,3 m︱
          5-Axis Machining Center: - CNC Control: FANUC 30i-A - ATC 100-fold (ISO 50) - 2-sides arrest BIG-PLUS response. - Spindle center refueling tool - Chip conveyor. - Cutting oil level alarm - Mist Coolant - Air blower - X, Y, ZB, C axis scale feedback - Automatic measurement, automatic center out function - Automatic tool length measuring device - Manual pulse handle control panel (with position display function) - Air dryer. - Special soft for index head - The distance from the top of the table to the main end is 1450 mm. (850mm W-axis stroke) The RB-F Series of 5 axis profilers boasts massive spindlehead and ram perfect for demanding multi-angle machining and simultaneous 5 axis contouring. They are the ideal choice for machining a variety of parts including complex molds and dies, aircraft parts and engine blocks. Their wide range of capabilities reduces the need for special tooling and fixtures.
            x-travel 8250 mm
            y-travel 3820 mm
            z-travel 600 mm
            w-axis 850 mm
            table-size 8000 x 3000 mm
            distance between columns 3400 mm
            workpiece weight 30 t
            b-axis +/- 95 °
            c-axis +/- 360 °
            spindle diameter 90 mm
            spindle turning speed range 150 - 15000 U/min
            spindle taper ISO Iso 50
            spindle motor 50 / 55 kW
            feeds x/y/z -stepless 1 - 6000 mm/min
            rapid travel x/y/z 15/15/6 m/min
            Control FANUC 30i-A
            ram diameter 450 x 450 mm
            total power requirement - KVA
            weight of the machine ca. - t
            dimensions of the machine ca. 8,2 x 21,6 x 6,3 m
            Description :
            5-Axis Machining Center:
            - CNC Control: FANUC 30i-A
            - ATC 100-fold (ISO 50)
            - 2-sides arrest BIG-PLUS response.
            - Spindle center refueling tool
            - Chip conveyor.
            - Cutting oil level alarm
            - Mist Coolant
            - Air blower
            - X, Y, ZB, C axis scale feedback
            - Automatic measurement, automatic center out function
            - Automatic tool length measuring device
            - Manual pulse handle control panel (with position display function)
            - Air dryer.
            - Special soft for index head
            - The distance from the top of the table to the main end is 1450 mm.
            (850mm W-axis stroke)

            The RB-F Series of 5 axis profilers boasts massive spindlehead and ram perfect
            for demanding multi-angle machining and simultaneous 5 axis contouring. They
            are the ideal choice for machining a variety of parts including complex molds
            and dies, aircraft parts and engine blocks. Their wide range of capabilities
            reduces the need for special tooling and fixtures.


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZAYER Memphis U-9000, Sinumerik 840D


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12182 · Planer-Type Milling M/C - Double Column

          ZAYER - Memphis U-9000, Sinumerik 840D - - 2010 - Sinumerik 840D

          Technical details
          x-travel 9000 mm︱y-travel 3000 mm︱z-travel 1250 mm︱control Sinumerik 840D ︱table surface area 10000 x 3000 mm︱distance between columns 4000 mm︱distance table -spindle nose max/min 73 - 1323 mm︱operating hours 15000 ︱tool taper DIN 69871 A 50 ︱turning speed range 35 - 4000 U/min︱feeds 6 - 20000 mm/min︱rapid traverse X- and Y-axis 40000 m/min︱rapid traverse: vertical 30000 mm/min︱tool changer number of tools 80 ︱weight of tools max. 25 kg︱tool changing time 10 sec︱milling head -swivable 360 Grad︱milling motor 37 kW︱weight of the machine ca. 140 t︱dimensions of the machine ca. 13,5 x 6,5 x 5,5 (7) m︱
          Iberimex-Zayer high-speed milling machine in gantry design with Siemens Sinumerik 840D, final acceptance and start of work 02/2010 but type sign 2008! Operating hours 38200,Milling hours 14,000. Milling head 45 ° as controlled 5th axis with autom. Positioning every 0.001 ° (360,000 positions) with central grease lubrication, special vertical head with reinforced bearings 100 mm. Further: - Hirth serration for centering the milling heads on the C-axis turntable as well as Hirth serration for vertical and universal milling heads - Cooling unit for thermal stabilization for ZF gearbox boom and milling head by means of a liquid cooling system, cooling medium water / glycol - Control cabinet with cooling unit - Coolant device with tank approx. 1000 liters, pump adjustable from 6 - 40 bar, delivery rate 30 liters / min., As well as 5 bar, delivery rate 60 liters / min. for external cooling with belt filter and magnetic separator instead of standard - Automatic water / air switchover via M function for internal and external coolant supply - internal coolant supply according to DIN 69871 A-D through the center of the spindle for universal milling head - Chip conveyors on both sides of the table as well as additional ones Cross chip conveyor - Machines - Brankamp CMS collision protection, 1-channel - Work area monitoring by means of a camera and TFT monitor camera arranged under the cross beam. - cladding: Complete enclosure, closed on 4 sides, open at the top, cover of the Tool change magazine including safety lock - Special design: doors on both sides - Hydraulic counterbalance to compensate for the ram - Longitudinal drive X-axis and transverse drive Y-axis by means of a rack and 2 Servomotors. The drives are electronically pre-tensioned free of play (master- slave principle) - Vertical adjustment of the Z-axis by means of a ball screw spindle (diameter 80) and a pre-tensioned double nut. The trolleys with the tools are not included in the scope of delivery. PLEASE NOTE: This is a large machine. We offer the machine ex location, which means the buyer has to organize and pay for the correct dismantling, packaging / container, shipping and reconstruction. There are strong hall cranes at the site. Machine dealer with own stock of 2500 m².
            x-travel 9000 mm
            y-travel 3000 mm
            z-travel 1250 mm
            control Sinumerik 840D
            table surface area 10000 x 3000 mm
            distance between columns 4000 mm
            distance table -spindle nose max/min 73 - 1323 mm
            operating hours 15000
            tool taper DIN 69871 A 50
            turning speed range 35 - 4000 U/min
            feeds 6 - 20000 mm/min
            rapid traverse X- and Y-axis 40000 m/min
            rapid traverse: vertical 30000 mm/min
            tool changer number of tools 80
            weight of tools max. 25 kg
            tool changing time 10 sec
            milling head -swivable 360 Grad
            milling motor 37 kW
            weight of the machine ca. 140 t
            dimensions of the machine ca. 13,5 x 6,5 x 5,5 (7) m
            Description :
            Iberimex-Zayer high-speed milling machine in gantry design with Siemens
            Sinumerik 840D, final acceptance and start of work 02/2010 but type sign 2008!
            Operating hours 38200,Milling hours 14,000.
            Milling head 45 ° as controlled 5th axis with autom. Positioning every 0.001 °
            (360,000 positions) with central grease lubrication, special vertical head with
            reinforced bearings 100 mm.
            Further:
            - Hirth serration for centering the milling heads on the C-axis turntable
            as well as Hirth serration for vertical and universal milling heads
            - Cooling unit for thermal stabilization for ZF gearbox boom and milling head
            by means of a liquid cooling system, cooling medium water / glycol
            - Control cabinet with cooling unit
            - Coolant device with tank approx. 1000 liters, pump adjustable from 6 - 40
            bar, delivery rate 30 liters / min., As well as 5 bar, delivery rate 60 liters /
            min. for external cooling with belt filter and magnetic separator instead of
            standard
            - Automatic water / air switchover via M function for internal and external
            coolant supply
            - internal coolant supply according to DIN 69871 A-D through the center of the
            spindle for universal milling head
            - Chip conveyors on both sides of the table as well as additional ones
            Cross chip conveyor
            - Machines - Brankamp CMS collision protection, 1-channel
            - Work area monitoring by means of a camera and TFT monitor camera arranged
            under the cross beam.
            - cladding:
            Complete enclosure, closed on 4 sides, open at the top, cover of the
            Tool change magazine including safety lock
            - Special design: doors on both sides
            - Hydraulic counterbalance to compensate for the ram
            - Longitudinal drive X-axis and transverse drive Y-axis by means of a rack and 2
            Servomotors. The drives are electronically pre-tensioned free of play (master-
            slave principle)
            - Vertical adjustment of the Z-axis by means of a ball screw spindle (diameter
            80) and a pre-tensioned double nut.
            The trolleys with the tools are not included in the scope of delivery.
            PLEASE NOTE: This is a large machine. We offer the machine ex location, which
            means the buyer has to organize and pay for the correct dismantling, packaging /
            container, shipping and reconstruction. There are strong hall cranes at the
            site.
            Machine dealer with own stock of 2500 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column JOHNFORD SDMC 10500


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18687 · Planer-Type Milling M/C - Double Column

          JOHNFORD - SDMC 10500 - - 2010 - Siemens 840 D

          Technical details
          x-travel 10500 mm︱y-travel 2800 mm︱z-travel 1066 mm︱Control Siemens 840 D ︱table-size 10500 x 2200 mm︱distance between columns 2800 mm︱milling head ︱number of spindle speeds 6000 U/min/rpm︱spindle drive 30 / 37 kW︱spindle diameter 90 mm︱table weight unlimited Kg︱distance table - lower edge spindle 400 - 1466 mm︱Rapid Travel X / Y / Z-Achse 30 / 30 /12 m/min︱feed speeds 1 - 10000 mm/min︱total power requirement 97 kW︱weight of the machine ca. 86 t︱dimensions of the machine ca. 21 x 7 x 4,65 m︱
          5 - AXES PORTAL MILLING MACHINE - CNC control Siemens 840D - 60-fold tool changer (ISO 50) - Bi-Rotativ Milling Head with A- & C-Axis (2,5 x 2,5°) - Handwheel electronic - autom. lubrication system
            x-travel 10500 mm
            y-travel 2800 mm
            z-travel 1066 mm
            Control Siemens 840 D
            table-size 10500 x 2200 mm
            distance between columns 2800 mm
            number of spindle speeds 6000 U/min/rpm
            spindle drive 30 / 37 kW
            spindle diameter 90 mm
            table weight unlimited Kg
            distance table - lower edge spin. 400 - 1466 mm
            Rapid Travel X / Y / Z-Achse 30 / 30 /12 m/min
            feed speeds 1 - 10000 mm/min
            total power requirement 97 kW
            weight of the machine ca. 86 t
            dimensions of the machine ca. 21 x 7 x 4,65 m
            Description :
            5 - AXES PORTAL MILLING MACHINE
            - CNC control Siemens 840D
            - 60-fold tool changer (ISO 50)
            - Bi-Rotativ Milling Head with A- & C-Axis (2,5 x 2,5°)
            - Handwheel electronic
            - autom. lubrication system



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column KAO MING 332M Multi face


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1110043 · Planer-Type Milling M/C - Double Column

          KAO MING - 332M Multi face - - 2009 - FANUC 18iTB

          Technical details
          x-travel 3.230 mm︱y-travel 3.850 mm︱z-travel 1.100 mm︱Control FANUC 18iTB ︱total power requirement 22/26 kW︱weight of the machine ca. 44 t︱dimensions of the machine ca. 8.1x7.5x5 m︱
          Make KAO MING Typ332M multi face Year of construction 2009 Control type CNC FANUC 18i-MB Table size (mm) 3000 x 2600 mm X out (mm) 3230 Y-off (mm) 3850 Z-off (mm) 1100 / max. distance between table and spindle 1425 mm Table burden 12,000 kg Speed (RPM) maximum 8000 tool holder ISO 50 Feed along (mm/Rev) 5 mtr/min. Feed (mm/Rev) across 5 mtr/min Vorschüb vertical (mm/Rev) 5 mtr/min. Rapid traverse 10 mtr/min Gesamtleistung(kW) spindle 22/26 kW Length (mm) 8130 Width (mm) 7493 Height (mm) 5080 Weight 44,000 kg Additional information WzW for 30 tools
            x-travel 3.230 mm
            y-travel 3.850 mm
            z-travel 1.100 mm
            Control FANUC 18iTB
            total power requirement 22/26 kW
            weight of the machine ca. 44 t
            dimensions of the machine ca. 8.1x7.5x5 m
            Description :
            Make KAO MING
            Typ332M multi face
            Year of construction 2009
            Control type CNC FANUC 18i-MB
            Table size (mm) 3000 x 2600 mm
            X out (mm) 3230
            Y-off (mm) 3850
            Z-off (mm) 1100 / max. distance between table and spindle 1425 mm
            Table burden 12,000 kg
            Speed (RPM) maximum 8000 tool holder ISO 50
            Feed along (mm/Rev) 5 mtr/min.
            Feed (mm/Rev) across 5 mtr/min
            Vorschüb vertical (mm/Rev) 5 mtr/min.
            Rapid traverse 10 mtr/min
            Gesamtleistung(kW) spindle 22/26 kW
            Length (mm) 8130
            Width (mm) 7493
            Height (mm) 5080
            Weight 44,000 kg


            Additional information
            WzW for 30 tools


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column JOBS LINX Compact 35


          • Schiess Moweg GmbH
          • Egerstraße 73-75
          • 41236 Mönchengladbach
          • Deutschland

          • +49 (0) 2166 61530
            +49 (0)2166 615315
          • info@schiess-moweg.de
            www.schiess-moweg.de
          #1034-13119 · Planer-Type Milling M/C - Double Column

          JOBS - LINX Compact 35 - - 2009 - SIEMENS 840 D

          Technical details
          x-travel 4500 mm︱y-travel 3650 mm︱z-travel 1100 mm︱c-axis +/-180 ︱distance between columns 4500 ︱spindle turning speed range 20 - 8000 U/min︱spindle taper HSK-A 100 ︱total power requirement 60 kW︱weight of the machine ca. 45 t︱dimensions of the machine ca. 8,5 x 4,9 x 5,2 m︱
          High Speed Machining Centre portal type - 5-axis CNC SIEMENS 840 D control - CNC universal milling head TMX C-axis +/- 180°, A-axis +0/-90° - 180-fold toolchanger model DEMMELER-WERKZEUGARENA - RENISHAW RMP 60 measuring probe - comlete splash housing
            x-travel 4500 mm
            y-travel 3650 mm
            z-travel 1100 mm
            c-axis +/-180
            distance between columns 4500
            spindle turning speed range 20 - 8000 U/min
            spindle taper HSK-A 100
            total power requirement 60 kW
            weight of the machine ca. 45 t
            dimensions of the machine ca. 8,5 x 4,9 x 5,2 m
            Description :
            High Speed Machining Centre portal type
            - 5-axis CNC SIEMENS 840 D control
            - CNC universal milling head TMX C-axis +/- 180°, A-axis +0/-90°
            - 180-fold toolchanger model DEMMELER-WERKZEUGARENA
            - RENISHAW RMP 60 measuring probe
            - comlete splash housing


        • Schiess Moweg GmbH
        • Egerstraße 73-75
        • 41236 Mönchengladbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column FOREST-LINE Majormill 240G


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19306 · Planer-Type Milling M/C - Double Column

          FOREST-LINE - Majormill 240G - - 2008 - Siemens 840D

          Technical details
          x-travel 8000 mm︱y-travel 2800 mm︱z-travel 1250 mm︱tool taper ISO 50 ︱size of pallet 8000 x 2115 mm︱table load 4 t/m²︱spindle drive motor 37 kW︱spindle turning speed range 10 - 4000 U/min︱A-Axis +/- 135 °︱Control Siemens 840D ︱distance between uprigths 2400 mm︱table travel mm︱feed 1 - 6 m/min︱total power requirement kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          equipped with: - CNC control Siemens Sinumerik 840 D - milling head swivelling every 2,5° (A-/C-axis) -- Universal milling head FA 305-U (37kw) 2,5 x 2,5° - Tool magazine (ISO 50) - Coolant system
            x-travel 8000 mm
            y-travel 2800 mm
            z-travel 1250 mm
            tool taper ISO 50
            size of pallet 8000 x 2115 mm
            table load 4 t/m²
            spindle drive motor 37 kW
            spindle turning speed range 10 - 4000 U/min
            A-Axis +/- 135 °
            Control Siemens 840D
            distance between uprigths 2400 mm
            feed 1 - 6 m/min
            Description :
            equipped with:
            - CNC control Siemens Sinumerik 840 D
            - milling head swivelling every 2,5° (A-/C-axis)
            -- Universal milling head FA 305-U (37kw) 2,5 x 2,5°
            - Tool magazine (ISO 50)
            - Coolant system



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column FOOKE Endura 905 linear


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-95 · Planer-Type Milling M/C - Double Column

          FOOKE - Endura 905 linear - - 2006 - FIDIA C20

          Technical details
          x-travel 7000 mm︱y-travel 3000 mm︱z-travel 1751 mm︱tool taper HSK A-63 ︱turning speeds 20000 U/min︱tool change unit 20 -fach︱Control FIDIA C20 ︱spindle motor 20 kW︱rapid traverse 65 m/min︱milling head -swivable +/- -95 / +125 °︱milling head swivable ca. +-275 °︱Number of axles 5 simultan St.︱total power requirement kW︱weight of the machine ca. 105 t︱dimensions of the machine ca. 12,2 x 6,3 x 5,8 m︱
          The machine is in good condition and can be inspected under power by arrangement with the seller. -->> immediately available <<--
            x-travel 7000 mm
            y-travel 3000 mm
            z-travel 1751 mm
            tool taper HSK A-63
            turning speeds 20000 U/min
            tool change unit 20 -fach
            Control FIDIA C20
            spindle motor 20 kW
            rapid traverse 65 m/min
            milling head -swivable +/- -95 / +125 °
            milling head swivable ca. +-275 °
            Number of axles 5 simultan St.
            weight of the machine ca. 105 t
            dimensions of the machine ca. 12,2 x 6,3 x 5,8 m
            Description :
            The machine is in good condition and can be inspected under power by
            arrangement with the seller.
            -->> immediately available <<--


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column SNK (SHIN NIPPON KOKI) RB-5


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18880 · Planer-Type Milling M/C - Double Column

          SNK (SHIN NIPPON KOKI) - RB-5 - - 2006 - Fanuc 18iMB

          Technical details
          x-travel 5250 mm︱y-travel 2900 mm︱z-travel 600 mm︱w-axis 1380 mm︱table-size 5000 x 2500 mm︱distance between columns 2900 mm︱workpiece weight 20000 kg︱distance table - lower edge spindle 1800 mm︱spindle diameter 90 mm︱diameter of quill 300 mm︱spindle turning speed range 6000 U/min︱spindle taper ISO 50 ︱feeds x/y/z -stepless 1- 10/10/8 m/min︱rapid travel x/y/z 15/20/8 m/min︱spindle motor 25 / 22 kW︱Control Fanuc 18iMB ︱total power requirement 75 KVA︱weight of the machine ca. 51 t︱dimensions of the machine ca. 6,4 x 14,6 x 5,2 m︱
          5 sides machining (4 axes simultaneous) equipped with: - CNC control Fanuc 18iMB - tool changer 80-fold (MAS BT 50) - additional Milling Head 35600h working & 13500h Spindle Hours
            x-travel 5250 mm
            y-travel 2900 mm
            z-travel 600 mm
            w-axis 1380 mm
            table-size 5000 x 2500 mm
            distance between columns 2900 mm
            workpiece weight 20000 kg
            distance table - lower edge spin. 1800 mm
            spindle diameter 90 mm
            diameter of quill 300 mm
            spindle turning speed range 6000 U/min
            spindle taper ISO 50
            feeds x/y/z -stepless 1- 10/10/8 m/min
            rapid travel x/y/z 15/20/8 m/min
            spindle motor 25 / 22 kW
            Control Fanuc 18iMB
            total power requirement 75 KVA
            weight of the machine ca. 51 t
            dimensions of the machine ca. 6,4 x 14,6 x 5,2 m
            Description :
            5 sides machining (4 axes simultaneous)
            equipped with:
            - CNC control Fanuc 18iMB
            - tool changer 80-fold (MAS BT 50)
            - additional Milling Head

            35600h working & 13500h Spindle Hours


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA rapid 5


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1110051 · Planer-Type Milling M/C - Double Column

          CORREA - rapid 5 - - 2004 -

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control ︱total power requirement 20/27 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15x6,2x6 m︱
          Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            total power requirement 20/27 kW
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15x6,2x6 m
            Description :
            Stock number 1110051
            Machine type CNC Portal milling machine
            Make CORREA
            Rapid type 50
            Year of manufacture 2004
            Control type HEIDENHAIN
            Table size (mm) 5000 x 2000 mm
            X out (mm) 5000 mm
            Y-off (mm) 3100 mm
            Z-off (mm) 1200 mm
            Table load Max 15 ton
            Speed (RPM) Max 18,000
            Tool holder HSK 63
            Gesamtleistung(kW) 20/27
            Length (mm) 15000
            Width (mm) 6200
            Height (mm) 6000
            Weight 65 ton


            Additional information

            Tool changer for 24 tools
            5-axis gesteuerd


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column TOSHIBA MPA 55210


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19208 · Planer-Type Milling M/C - Double Column

          TOSHIBA - MPA 55210 - - 2004 - Fanuc 15iMB

          Technical details
          x-travel 22700 mm︱y-travel 6500 mm︱z-travel 2300 mm︱w-axis 4200 mm︱table-size 21,7 x 4,5 / 2x 10x4,5 m︱distance between columns 5500 mm︱workpiece weight 300 / 150 kg︱distance table - lower edge spindle 6130 mm︱spindle turning speed range 5 - 1200 U/min︱spindle taper ISO ︱feeds x/y/z -stepless m/min︱rapid travel x/y/z m/min︱spindle motor 100 kW︱Control Fanuc 15iMB ︱ram head dimension 500 x 500 mm︱total power requirement 380 KVA︱weight of the machine ca. 550 t︱dimensions of the machine ca. 13,75 x 54,2 x 11,8 m︱
          5 sides machining equipped with: - CNC control Fanuc 15iMB (5 axes X,Y,Z;W;B) - Tool changer 120-fold (MAS BT 50) - head changer 12-fold -- 4x angle heads -- 4-axis head -- Drilling head -- 3 pcs. adapter/extension - Hydraulic unit - Oil cooler - Chip conveyor - Coolant unit
            x-travel 22700 mm
            y-travel 6500 mm
            z-travel 2300 mm
            w-axis 4200 mm
            table-size 21,7 x 4,5 / 2x 10x4,5 m
            distance between columns 5500 mm
            workpiece weight 300 / 150 kg
            distance table - lower edge spin. 6130 mm
            spindle turning speed range 5 - 1200 U/min
            spindle motor 100 kW
            Control Fanuc 15iMB
            ram head dimension 500 x 500 mm
            total power requirement 380 KVA
            weight of the machine ca. 550 t
            dimensions of the machine ca. 13,75 x 54,2 x 11,8 m
            Description :
            5 sides machining
            equipped with:
            - CNC control Fanuc 15iMB (5 axes X,Y,Z;W;B)
            - Tool changer 120-fold (MAS BT 50)
            - head changer 12-fold
            -- 4x angle heads
            -- 4-axis head
            -- Drilling head
            -- 3 pcs. adapter/extension
            - Hydraulic unit
            - Oil cooler
            - Chip conveyor
            - Coolant unit


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Find a double column planer-type milling M/C here
          Discover why milling is a popular metalworking technique

          There are a wide variety of milling machines available to industry professionals today. One option is the planing process whereby the milling surface and the workpiece are moved in opposite directions to one another. This is in contrast to the process of shaping where the workpiece remains stationary. A double column planer-type milling M/C can be used to form a variety of materials from wood to heavy metals. Find the best in used machinery at LagerMaschinen your source for quality industrial machines.

          Planer-style milling machines offer many advantages

          Planing is a versatile approach to the machining of solids. Both flat surfaces and notched and grooved surfaces can be produced by a double column planer-type milling M/C. Planing is used mostly for the creating of linear surfaces as opposed to rounded ones. If you're in the market for a double column planer-type milling M/C why not check out the used models available at LagerMaschinen. You can save yourself time and money by shopping here for used machinery.

          LagerMaschinen: making the most of your time and money

          Investing in used machinery is a smart plan for your business. Moreover shopping for used equipment online not only makes the most of your budget but of your valuable time as well. For example you're looking for a double column planer-type milling M/C you can use LagerMaschinen's user-friendly site to browse by model price or location and find the best used machine for your business' needs. For the best selection in metalworking equipment and other industrial machinery check out LagerMaschinen.